From 317402d5ba28fd5c57e8426a5f2661c811654f30 Mon Sep 17 00:00:00 2001 From: le-Bark <43352109+le-Bark@users.noreply.github.com> Date: Wed, 7 Apr 2021 21:07:23 -0400 Subject: hd44780_spi: added lcd support to the mightyboard (#4121) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Marc-André Denis --- docs/Config_Reference.md | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) (limited to 'docs/Config_Reference.md') diff --git a/docs/Config_Reference.md b/docs/Config_Reference.md index cca85161..7833a492 100644 --- a/docs/Config_Reference.md +++ b/docs/Config_Reference.md @@ -3089,7 +3089,8 @@ Support for a display attached to the micro-controller. [display] lcd_type: # The type of LCD chip in use. This may be "hd44780" (which is used -# in "RepRapDiscount 2004 Smart Controller" type displays), "st7920" +# in "RepRapDiscount 2004 Smart Controller" type displays),"hd44780_spi" +# (which is used in mightyboard based printers), "st7920" # (which is used in "RepRapDiscount 12864 Full Graphic Smart # Controller" type displays), "emulated_st7920" (which emulate a ST7920 # display but won't work properly with the "st7920" display driver), @@ -3122,12 +3123,16 @@ lcd_type: #spi_software_sclk_pin: #spi_software_mosi_pin: #spi_software_miso_pin: -# The pins connected to an emulated_st7920 type lcd. The en_pin corresponds -# to the cs_pin of the st7920 type lcd, spi_software_sclk_pin corresponds -# to sclk_pin and spi_software_mosi_pin corresponds to sid_pin. The -# spi_software_miso_pin needs to be set to an unused pin of the printer -# mainboard as the st7920 as no MISO pin but the software spi implementation -# requires this pin to be configured. The default spi_speed is 1MHz. +# The pins connected to an emulated_st7920 or hd44780_spi type lcd. +# The en_pin corresponds to the cs_pin of the st7920 type lcd, +# spi_software_sclk_pin corresponds to sclk_pin and spi_software_mosi_pin +# corresponds to sid_pin. The spi_software_miso_pin needs to be set to an +# unused pin of the printer mainboard as the st7920 as no MISO pin +# but the software spi implementation requires this pin to be configured. +# The default spi_speed is 1MHz. +#latch_pin: +# Used with the hd44780_spi type lcd, connected to the latch pin of the +# shift register. #cs_pin: #a0_pin: #rst_pin: -- cgit v1.2.3-70-g09d2