From 23f547169c86150c9e11fc594bf0d47ee1efe501 Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Thu, 3 Dec 2020 12:37:56 -0500 Subject: rpi_temperature: Don't read min_temp/max_temp directly from config Signed-off-by: Kevin O'Connor --- docs/Config_Reference.md | 8 -------- 1 file changed, 8 deletions(-) (limited to 'docs/Config_Reference.md') diff --git a/docs/Config_Reference.md b/docs/Config_Reference.md index cb9e3a6e..020128f5 100644 --- a/docs/Config_Reference.md +++ b/docs/Config_Reference.md @@ -2069,14 +2069,6 @@ CPU temperature from Raspberry Pi. # parameters. #sensor_type: # Must be "rpi_temperature". -min_temp: -40 -max_temp: 85 -# The maximum safe range of temperatures (in Celsius) that the -# RPi must remain within. This controls a safety feature -# implemented in the micro-controller code - should the measured -# temperature ever fall outside this range then the micro-controller -# will go into a shutdown state. Set this range just wide -# enough so that reasonable temperatures do not result in an error. ``` ## [heater_generic] -- cgit v1.2.3-70-g09d2