From 08a1c9f12760ee6d89db2b82e76c7d93453212db Mon Sep 17 00:00:00 2001 From: Eric Callahan Date: Mon, 12 Aug 2024 10:56:49 -0400 Subject: docs: update temperature_probe documentation Add documentation for the "max_valid_temp" option. Signed-off-by: Eric Callahan --- docs/Config_Reference.md | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'docs/Config_Reference.md') diff --git a/docs/Config_Reference.md b/docs/Config_Reference.md index f19f0ebc..e4c70937 100644 --- a/docs/Config_Reference.md +++ b/docs/Config_Reference.md @@ -2458,6 +2458,10 @@ postfix for both sections. # "calibration_extruder_temp" option is set. Its recommended to heat # the extruder some distance from the bed to minimize its impact on # the probe coil temperature. The default is 50. +#max_validation_temp: 60. +# The maximum temperature used to validate the calibration. It is +# recommended to set this to a value between 100 and 120 for enclosed +# printers. The default is 60. ``` ## Temperature sensors -- cgit v1.2.3-70-g09d2