From fa78e6b8fb392baf0a8fdcdda9fad7c0383bd1ff Mon Sep 17 00:00:00 2001 From: Pedro Lamas Date: Wed, 18 Jan 2023 00:06:45 +0000 Subject: screws_tilt_adjust: status result as dictionary Signed-off-by: Pedro Lamas --- docs/Config_Changes.md | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'docs/Config_Changes.md') diff --git a/docs/Config_Changes.md b/docs/Config_Changes.md index f77a9bd9..3a38fd40 100644 --- a/docs/Config_Changes.md +++ b/docs/Config_Changes.md @@ -8,6 +8,11 @@ All dates in this document are approximate. ## Changes +20230202: The format of the `printer.screws_tilt_adjust` status +information has changed. The information is now stored as a dictionary of +screws with the resulting measurements. See the +[status reference](Status_Reference.md#screws_tilt_adjust) for details. + 20230201: The `[bed_mesh]` module no longer loads the `default` profile on startup. It is recommended that users who use the `default` profile add `BED_MESH_PROFILE LOAD=default` to their `START_PRINT` macro (or -- cgit v1.2.3-70-g09d2