From a878831d5ea8eb86a1bcd94a6a2da926a84d5b6a Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Fri, 26 Jul 2019 10:59:07 -0400 Subject: mcp4728: Update to better match printrbot revf requirements Reported by @Grumps49. Signed-off-by: Kevin O'Connor --- docs/Config_Changes.md | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'docs/Config_Changes.md') diff --git a/docs/Config_Changes.md b/docs/Config_Changes.md index 3844b3b3..979b0967 100644 --- a/docs/Config_Changes.md +++ b/docs/Config_Changes.md @@ -6,6 +6,10 @@ All dates in this document are approximate. # Changes +20190726: The mcp4728 digital-to-analog code has changed. The default +i2c_address is now 0x60 and the voltage reference is now relative to +the mcp4728's internal 2.048 volt reference. + 20190710: The z_hop option was removed from the [firmware_retract] config section. The z_hop support was incomplete and could cause incorrect behavior with several common slicers. -- cgit v1.2.3-70-g09d2