From c179db3d4331db9d85c7acfdaa1e96e295d277ba Mon Sep 17 00:00:00 2001
From: Kevin O'Connor <kevin@koconnor.net>
Date: Mon, 1 Nov 2021 13:54:11 -0400
Subject: temperature_sensors: Deprecate "NTC 100K beta 3950" thermistor

It seems the common "beta 3950" thermistors generally follow a
temperature table defined by the new "Generic 3950" definition.  Using
a table that actually follows the "beta 3950" temperature curve is
generally less accurate.  Deprecate the existing "NTC 100K beta 3950"
definition to avoid this common issue.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
---
 config/generic-bigtreetech-skr-2.cfg              | 2 +-
 config/generic-duet3-mini.cfg                     | 2 +-
 config/generic-mks-rumba32-v1.0.cfg               | 2 +-
 config/generic-rumba.cfg                          | 2 +-
 config/kit-voron2-250mm.cfg                       | 2 +-
 config/printer-mtw-create-2015.cfg                | 2 +-
 config/printer-wanhao-duplicator-i3-v2.1-2017.cfg | 4 ++--
 7 files changed, 8 insertions(+), 8 deletions(-)

(limited to 'config')

diff --git a/config/generic-bigtreetech-skr-2.cfg b/config/generic-bigtreetech-skr-2.cfg
index 37cf3283..e978af21 100644
--- a/config/generic-bigtreetech-skr-2.cfg
+++ b/config/generic-bigtreetech-skr-2.cfg
@@ -73,7 +73,7 @@ max_temp: 250
 
 [heater_bed]
 heater_pin: PD7
-sensor_type: NTC 100K beta 3950
+sensor_type: Generic 3950
 sensor_pin: PA1
 control: watermark
 min_temp: 0
diff --git a/config/generic-duet3-mini.cfg b/config/generic-duet3-mini.cfg
index 732c1ae3..99e1af3d 100644
--- a/config/generic-duet3-mini.cfg
+++ b/config/generic-duet3-mini.cfg
@@ -123,7 +123,7 @@ sense_resistor: 0.056
 
 [heater_bed]
 heater_pin: PB17 #out1
-sensor_type: NTC 100K beta 3950
+sensor_type: Generic 3950
 sensor_pin: vref_scaled:PC0
 control: pid
 pullup_resistor: 2200
diff --git a/config/generic-mks-rumba32-v1.0.cfg b/config/generic-mks-rumba32-v1.0.cfg
index 229a7dfc..a2cf5554 100644
--- a/config/generic-mks-rumba32-v1.0.cfg
+++ b/config/generic-mks-rumba32-v1.0.cfg
@@ -72,7 +72,7 @@ max_temp: 250
 
 [heater_bed]
 heater_pin: PA1
-sensor_type: NTC 100K beta 3950
+sensor_type: Generic 3950
 sensor_pin: PC0
 control: watermark
 min_temp: 0
diff --git a/config/generic-rumba.cfg b/config/generic-rumba.cfg
index efc7398a..48bee09a 100644
--- a/config/generic-rumba.cfg
+++ b/config/generic-rumba.cfg
@@ -74,7 +74,7 @@ max_temp: 250
 
 [heater_bed]
 heater_pin: PH6
-sensor_type: NTC 100K beta 3950
+sensor_type: Generic 3950
 sensor_pin: PK3
 control: watermark
 min_temp: 0
diff --git a/config/kit-voron2-250mm.cfg b/config/kit-voron2-250mm.cfg
index 2d509967..282e7595 100644
--- a/config/kit-voron2-250mm.cfg
+++ b/config/kit-voron2-250mm.cfg
@@ -141,7 +141,7 @@ max_extrude_only_distance: 780.0
 heater_pin: PB4
 #   D10 on mcu_xye
 max_power: 1.0
-sensor_type: NTC 100K beta 3950
+sensor_type: Generic 3950
 sensor_pin: PK5
 #   T0 on mcu_xye
 smooth_time: 3.0
diff --git a/config/printer-mtw-create-2015.cfg b/config/printer-mtw-create-2015.cfg
index cae0524e..4194fd23 100644
--- a/config/printer-mtw-create-2015.cfg
+++ b/config/printer-mtw-create-2015.cfg
@@ -79,7 +79,7 @@ max_temp: 275
 
 [heater_bed]
 heater_pin: PE5
-sensor_type: NTC 100K beta 3950
+sensor_type: Generic 3950
 sensor_pin: PF2
 control: watermark
 min_temp: 0
diff --git a/config/printer-wanhao-duplicator-i3-v2.1-2017.cfg b/config/printer-wanhao-duplicator-i3-v2.1-2017.cfg
index 211229e2..87f8f857 100644
--- a/config/printer-wanhao-duplicator-i3-v2.1-2017.cfg
+++ b/config/printer-wanhao-duplicator-i3-v2.1-2017.cfg
@@ -127,7 +127,7 @@ rotation_distance: 29.888
 nozzle_diameter: 0.400
 filament_diameter: 1.750
 heater_pin: PD5
-sensor_type: NTC 100K beta 3950
+sensor_type: Generic 3950
 sensor_pin: PA7
 control: pid
 pid_Kp: 18.214030
@@ -138,7 +138,7 @@ max_temp: 230
 
 [heater_bed]
 heater_pin: PD4
-sensor_type: NTC 100K beta 3950
+sensor_type: Generic 3950
 sensor_pin: PA6
 control: pid
 pid_Kp: 71.321
-- 
cgit v1.2.3-70-g09d2