From 893cbbab83ebd4906eab0ce9bb08d0fb4f805af7 Mon Sep 17 00:00:00 2001 From: Arksine Date: Mon, 21 Jan 2019 17:24:17 -0500 Subject: pause_resume: update documentation Add updates to example-extras.cfg and G-Codes.md documenting pause_resume. Also add M600 (filament change) to sample-macros.cfg. Signed-off-by: Eric Callahan --- config/sample-macros.cfg | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'config/sample-macros.cfg') diff --git a/config/sample-macros.cfg b/config/sample-macros.cfg index 10854b58..1f6d84a1 100644 --- a/config/sample-macros.cfg +++ b/config/sample-macros.cfg @@ -34,3 +34,24 @@ #gcode: SET_PIN PIN=BEEPER_pin VALUE={S} # G4 P{P} # SET_PIN PIN=BEEPER_pin VALUE=0 + +# M600: Filament Change. This macro will pause the printer, move +# the tool to the change position, and retract the filament 50mm. +# Adjust the retraction settings for your own extruder. After filament +# has been changed, the print can be resumed from its previous position +# with the "RESUME" gcode +# +#[gcode_macro M600] +#default_parameter_X: 50 +#default_parameter_Y: 0 +#default_parameter_Z: 10 +#gcode: +# PAUSE +# G91 +# G1 E-.8 F2700 +# G1 Z{Z} +# G90 +# G1 X{X} Y{Y} F3000 +# G91 +# G1 E-50 F1000 +# G90 -- cgit v1.2.3-70-g09d2