From ae9102482560b557628c83a247ab35063ade0bf7 Mon Sep 17 00:00:00 2001 From: Tomasz Kramkowski Date: Fri, 15 Aug 2025 21:13:44 +0100 Subject: Rename everything significant to Kutter except for docs --- config/printer-creality-cr10s-pro-v2-2020.cfg | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'config/printer-creality-cr10s-pro-v2-2020.cfg') diff --git a/config/printer-creality-cr10s-pro-v2-2020.cfg b/config/printer-creality-cr10s-pro-v2-2020.cfg index e06cd82c..6ae40479 100644 --- a/config/printer-creality-cr10s-pro-v2-2020.cfg +++ b/config/printer-creality-cr10s-pro-v2-2020.cfg @@ -69,7 +69,7 @@ max_extrude_only_accel: 1000.0 heater_pin: PB4 #ar10 sensor_type: EPCOS 100K B57560G104F sensor_pin: PK5 #analog13 -control: pid #calibrated in Klipper, you will need to run this for your machine +control: pid #calibrated in kutter, you will need to run this for your machine pid_kp: 28.359 pid_ki: 1.616 pid_kd: 124.426 @@ -84,7 +84,7 @@ pin: PH6 #ar9 heater_pin: PH5 #ar8 sensor_type: EPCOS 100K B57560G104F sensor_pin: PK6 #analog14 -control: pid #calibrated in Klipper, you will need to run this for your machine +control: pid #calibrated in kutter, you will need to run this for your machine pid_kp: 70.936 pid_ki: 1.151 pid_kd: 1093.298 @@ -99,7 +99,7 @@ stow_on_each_sample: False # Be careful probe_with_touch_mode: True x_offset: -27 y_offset: -2 -z_offset: 2 # you will need to calibrate this in Klipper +z_offset: 2 # you will need to calibrate this in kutter speed: 4.0 samples: 2 sample_retract_dist: 3.0 -- cgit v1.2.3-70-g09d2