From c463893a5ea1353dc3aa94169fa2398ecdd927df Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Mon, 9 Apr 2018 15:11:12 -0400 Subject: adc_temperatures: Add "PT100 INA826" sensor type Signed-off-by: Kevin O'Connor --- config/example.cfg | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'config/example.cfg') diff --git a/config/example.cfg b/config/example.cfg index 9d860a58..7e8c2cd6 100644 --- a/config/example.cfg +++ b/config/example.cfg @@ -146,9 +146,10 @@ heater_pin: ar10 # periods) to the heater. The default is 1.0. sensor_type: EPCOS 100K B57560G104F # Type of sensor - this may be "EPCOS 100K B57560G104F", "ATC -# Semitec 104GT-2", "NTC 100K beta 3950", or "AD595". Additional -# sensor types may be available - see the example-extras.cfg file -# for details. This parameter must be provided. +# Semitec 104GT-2", "NTC 100K beta 3950", "AD595", or "PT100 +# INA826". Additional sensor types may be available - see the +# example-extras.cfg file for details. This parameter must be +# provided. sensor_pin: analog13 # Analog input pin connected to the sensor. This parameter must be # provided. @@ -158,7 +159,7 @@ sensor_pin: analog13 # thermistor. The default is 4700 ohms. #adc_voltage: 5.0 # The ADC comparison voltage. This parameter is only valid when the -# sensor is an AD595. The default is 5 volts. +# sensor is an AD595 or "PT100 INA826". The default is 5 volts. control: pid # Control algorithm (either pid or watermark). This parameter must # be provided. -- cgit v1.2.3-70-g09d2