From 93f1e6dd86bf6168f2bae163213143063242391e Mon Sep 17 00:00:00 2001 From: Justin Schuh Date: Sun, 24 Nov 2019 18:37:30 -0500 Subject: FAN: Kick start fan when the increase is more than 50% (#2085) Large increases in fan speed can suffer from acceleration lag, so this change kick starts the fan for a change of 50% or more in the same way that starting the fan from 0% does. Signed-off-by: Justin Schuh --- config/example.cfg | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'config/example.cfg') diff --git a/config/example.cfg b/config/example.cfg index fa293abc..5b9b3264 100644 --- a/config/example.cfg +++ b/config/example.cfg @@ -253,8 +253,9 @@ pin: ar9 # constrained by the implementation and may be significantly # different than the requested cycle_time. The default is False. #kick_start_time: 0.100 -# Time (in seconds) to run the fan at full speed when first enabling -# it (helps get the fan spinning). The default is 0.100 seconds. +# Time (in seconds) to run the fan at full speed when either first +# enabling or increasing it by more than 50% (helps get the fan spinning). +# The default is 0.100 seconds. #off_below: 0.0 # The minimum input speed which will power the fan (expressed as a # value from 0.0 to 1.0). When a speed lower than off_below is -- cgit v1.2.3-70-g09d2