From 832c0bc0170e78f702677a0faca3ed355341ff97 Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Fri, 20 Apr 2018 11:43:21 -0400 Subject: docs: Add more hints to use /dev/by-id/ for the serial device Signed-off-by: Kevin O'Connor --- config/example.cfg | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'config/example.cfg') diff --git a/config/example.cfg b/config/example.cfg index 7e8c2cd6..aacd4c99 100644 --- a/config/example.cfg +++ b/config/example.cfg @@ -239,7 +239,9 @@ pin: ar9 # Micro-controller information. [mcu] serial: /dev/ttyACM0 -# The serial port to connect to the MCU. The default is /dev/ttyS0 +# The serial port to connect to the MCU. If unsure (or if it +# changes) see the "Where's my serial port?" section of the FAQ. The +# default is /dev/ttyS0 #baud: 250000 # The baud rate to use. The default is 250000. pin_map: arduino -- cgit v1.2.3-70-g09d2