From 2740838b2ef9bbf661de8a192b831990a5c08e38 Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Fri, 18 May 2018 19:12:03 -0400 Subject: fan: Allow the fan shutdown_speed to be configured Add a shutdown_speed config option to fans so that users can specify the speed on a shutdown event. Signed-off-by: Kevin O'Connor --- config/example.cfg | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'config/example.cfg') diff --git a/config/example.cfg b/config/example.cfg index 5bf94895..dd4b7d28 100644 --- a/config/example.cfg +++ b/config/example.cfg @@ -229,6 +229,10 @@ pin: ar9 # will be scaled between zero and max_power (for example, if # max_power is .9 and a fan speed of 80% is requested then the fan # power will be set to 72%). The default is 1.0. +#shutdown_speed: 0 +# The desired fan speed (expressed as a value from 0.0 to 1.0) if +# the micro-controller software enters an error state. The default +# is 0. #cycle_time: 0.010 # The amount of time (in seconds) for each PWM power cycle to the # fan. It is recommended this be 10 milliseconds or greater when -- cgit v1.2.3-70-g09d2