From 63dffd9307f4a1e69a40df69ad1f7c6bc7e6929f Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Tue, 24 Jul 2018 15:49:14 -0400 Subject: spi_temperature: Provide a default value for spi_speed All of the Maxim chips support a 4Mhz spi transfer rate, so use that as a default spi speed. Signed-off-by: Kevin O'Connor --- config/example-extras.cfg | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'config/example-extras.cfg') diff --git a/config/example-extras.cfg b/config/example-extras.cfg index be2dc5d7..8dcec27f 100644 --- a/config/example-extras.cfg +++ b/config/example-extras.cfg @@ -639,9 +639,9 @@ # heater parameters. The parameters below describe sensor parameters. #sensor_type: # One of "MAX6675", "MAX31855", "MAX31856", or "MAX31865". -#spi_speed: +#spi_speed: 4000000 # The SPI speed (in hz) to use when communicating with the chip. -# This parameter must be provided. +# The default is 4000000. #sensor_pin: # The chip select line for the sensor chip. This parameter must be # provided. -- cgit v1.2.3-70-g09d2