From 15b5dbaf8ffac8e3889b2cc0ba7a61bce1e9fb6f Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Mon, 16 Nov 2020 18:47:32 -0500 Subject: docs: Move config reference information to new Config_Reference.md Move all the config reference information from files in the config/ directory to a new Config_Reference.md document. Signed-off-by: Kevin O'Connor --- config/example-corexy.cfg | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) (limited to 'config/example-corexy.cfg') diff --git a/config/example-corexy.cfg b/config/example-corexy.cfg index 1c175fa9..5ce40ac9 100644 --- a/config/example-corexy.cfg +++ b/config/example-corexy.cfg @@ -1,14 +1,12 @@ -# This file serves as documentation for config parameters of corexy +# This file is an example config file for corexy (and also h-bot) # style printers. One may copy and edit this file to configure a new -# corexy printer. Only parameters unique to corexy printers are -# described here - see the "example.cfg" file for description of -# common config parameters. +# corexy printer. # DO NOT COPY THIS FILE WITHOUT CAREFULLY READING AND UPDATING IT # FIRST. Incorrectly configured parameters may cause damage. -# The stepper_x section is used to describe the X axis as well as the -# stepper controlling the X+Y movement. +# See docs/Config_Reference.md for a description of parameters. + [stepper_x] step_pin: ar54 dir_pin: ar55 @@ -19,8 +17,6 @@ position_endstop: 0 position_max: 200 homing_speed: 50 -# The stepper_y section is used to describe the Y axis as well as the -# stepper controlling the X-Y movement. [stepper_y] step_pin: ar60 dir_pin: ar61 @@ -74,7 +70,6 @@ pin_map: arduino [printer] kinematics: corexy -# This option must be "corexy" for corexy printers. max_velocity: 300 max_accel: 3000 max_z_velocity: 25 -- cgit v1.2.3-70-g09d2