From f582a36e4df16d5709943f7df17a900c8bcc12ab Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Wed, 25 May 2016 11:37:40 -0400 Subject: Initial commit of source code. Signed-off-by: Kevin O'Connor --- README.md | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 README.md (limited to 'README.md') diff --git a/README.md b/README.md new file mode 100644 index 00000000..f594c95d --- /dev/null +++ b/README.md @@ -0,0 +1,26 @@ +Welcome to the Klipper project! + +This project implements a 3d-printer firmware. There are two parts to +this firmware - code that runs on a micro-controller and code that +runs on a host machine. The host software does the work to build a +schedule of events, while the micro-controller software does the work +to execute the provided schedule at the specified times. + +Please see the [documentation](docs/Overview.md) for more information +on running and working with Klipper. + +License +======= + +Klipper is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 3 of the License, or +(at your option) any later version. + +Klipper is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with Klipper. If not, see . -- cgit v1.2.3-70-g09d2