diff options
Diffstat (limited to 'src/stm32f0/stm32f0xx_hal_conf.h')
| -rw-r--r-- | src/stm32f0/stm32f0xx_hal_conf.h | 336 |
1 files changed, 336 insertions, 0 deletions
diff --git a/src/stm32f0/stm32f0xx_hal_conf.h b/src/stm32f0/stm32f0xx_hal_conf.h new file mode 100644 index 00000000..fdc58be4 --- /dev/null +++ b/src/stm32f0/stm32f0xx_hal_conf.h @@ -0,0 +1,336 @@ +/** +****************************************************************************** +* @file stm32f0xx_hal_conf.h +* @brief HAL configuration file. +****************************************************************************** +* @attention +* +* <h2><center>© COPYRIGHT(c) 2019 STMicroelectronics</center></h2> +* +*Redistribution in source and binary forms, with or without modification, +* are permitted provided that the following conditions are met: +* 1. Redistributions of source code must retain the above copyright notice, +* this list of conditions and the following disclaimer. +* 2. Redistributions in binary form must reproduce the above copyright notice, +* this list of conditions and the following disclaimer in the documentation +* and/or other materials provided with the distribution. +* 3. Neither the name of STMicroelectronics nor the names of its contributors +* may be used to endorse or promote products derived from this software +* without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +*IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +****************************************************************************** +*/ + +/* Define to prevent recursive inclusion -----------------------------------*/ +#ifndef __STM32F0xx_HAL_CONF_H +#define __STM32F0xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ----------------------------------------------------------*/ +/* Exported constants ------------------------------------------------------*/ + +/* ########################## Module Selection ############################ */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +#define HAL_ADC_MODULE_ENABLED +/*#define HAL_CRYP_MODULE_ENABLED */ +#define HAL_CAN_MODULE_ENABLED +/*#define HAL_CEC_MODULE_ENABLED */ +/*#define HAL_COMP_MODULE_ENABLED */ +/*#define HAL_CRC_MODULE_ENABLED */ +/*#define HAL_CRYP_MODULE_ENABLED */ +/*#define HAL_TSC_MODULE_ENABLED */ +/*#define HAL_DAC_MODULE_ENABLED */ +/*#define HAL_I2S_MODULE_ENABLED */ +#define HAL_IWDG_MODULE_ENABLED +/*#define HAL_LCD_MODULE_ENABLED */ +/*#define HAL_LPTIM_MODULE_ENABLED */ +/*#define HAL_RNG_MODULE_ENABLED */ +/*#define HAL_RTC_MODULE_ENABLED */ +/*#define HAL_SPI_MODULE_ENABLED */ +#define HAL_TIM_MODULE_ENABLED +#define HAL_UART_MODULE_ENABLED +/*#define HAL_USART_MODULE_ENABLED */ +/*#define HAL_IRDA_MODULE_ENABLED */ +/*#define HAL_SMARTCARD_MODULE_ENABLED */ +/*#define HAL_SMBUS_MODULE_ENABLED */ +/*#define HAL_WWDG_MODULE_ENABLED */ +/*#define HAL_PCD_MODULE_ENABLED */ +/*#define HAL_EXTI_MODULE_ENABLED */ +#define HAL_CORTEX_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_GPIO_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_I2C_MODULE_ENABLED + +/* ########################## HSE/HSI Values adaptation ################### */ +/** +* @brief Adjust the value of External High Speed oscillator (HSE) used\ +* in your application. +* This value is used by the RCC HAL module to compute the system frequency +* (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + /*!< Value of the External oscillator in Hz */ + #define HSE_VALUE ((uint32_t)8000000) +#endif /* HSE_VALUE */ + +/** + * @brief In the following line adjust the External High Speed oscillator\ + * (HSE) Startup + * Timeout value + */ +#if !defined (HSE_STARTUP_TIMEOUT) + /*!< Time out for HSE start up, in ms */ + #define HSE_STARTUP_TIMEOUT ((uint32_t)100) +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + /*!< Value of the Internal oscillator in Hz*/ + #define HSI_VALUE ((uint32_t)8000000) +#endif /* HSI_VALUE */ + +/** + * @brief In the following line adjust the Internal High Speed oscillator \ + * (HSI) Startup + * Timeout value + */ +#if !defined (HSI_STARTUP_TIMEOUT) + #define HSI_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSI startup */ +#endif /* HSI_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator for ADC (HSI14) value. + */ +#if !defined (HSI14_VALUE) +#define HSI14_VALUE ((uint32_t)14000000) + /*!< Value of the Internal High Speed oscillator for ADC in Hz. + The real value may vary depending on the variations + in voltage and temperature. */ +#endif /* HSI14_VALUE */ + +/** + * @brief Internal High Speed oscillator for USB (HSI48) value. + */ +#if !defined (HSI48_VALUE) +#define HSI48_VALUE ((uint32_t)48000000) + /*!< Value of the Internal High Speed oscillator for USB in Hz. + The real value may vary depending on the variations + in voltage and temperature. */ +#endif /* HSI48_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE ((uint32_t)40000) +#endif /* LSI_VALUE */ + /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ +/** + * @brief External Low Speed oscillator (LSI) value. + */ +#if !defined (LSE_VALUE) + /*!< Value of the External Low Speed oscillator in Hz */ + #define LSE_VALUE ((uint32_t)32768) +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + /*!< Time out for LSE start up, in ms */ + #define LSE_STARTUP_TIMEOUT ((uint32_t)5000) +#endif /* LSE_STARTUP_TIMEOUT */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ######################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */ +/*!< tick interrupt priority (lowest by default) */ +#define TICK_INT_PRIORITY ((uint32_t)0) + /* Warning: Must be set to higher priority for HAL_Delay() */ + /* and HAL_GetTick() usage under interrupt context */ +#define USE_RTOS 0 +#define PREFETCH_ENABLE 1 +#define INSTRUCTION_CACHE_ENABLE 0 +#define DATA_CACHE_ENABLE 0 +/* ########################## Assert Selection ############################# */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* ################## SPI peripheral configuration ######################### */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver +* Activated: CRC code is present inside driver +* Deactivated: CRC code cleaned from driver +*/ + +#define USE_SPI_CRC 0U + +/* Includes -----------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f0xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED + #include "stm32f0xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f0xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f0xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f0xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f0xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f0xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32f0xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_COMP_MODULE_ENABLED + #include "stm32f0xx_hal_comp.h" +#endif /* HAL_COMP_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f0xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f0xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f0xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f0xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f0xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f0xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f0xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f0xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f0xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f0xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f0xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + #include "stm32f0xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f0xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f0xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_TSC_MODULE_ENABLED + #include "stm32f0xx_hal_tsc.h" +#endif /* HAL_TSC_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f0xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f0xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f0xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +/* Exported macro -----------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) \ + ((expr) ? (void)0U : assert_failed((char *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------ */ + void assert_failed(char* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_HAL_CONF_H */ + +/********************** (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |