diff options
Diffstat (limited to 'src/rp2040/Kconfig')
| -rw-r--r-- | src/rp2040/Kconfig | 50 |
1 files changed, 30 insertions, 20 deletions
diff --git a/src/rp2040/Kconfig b/src/rp2040/Kconfig index ec8a1af3..bec96336 100644 --- a/src/rp2040/Kconfig +++ b/src/rp2040/Kconfig @@ -1,8 +1,8 @@ -# Kconfig settings for RP2040 processors +# Kconfig settings for RPxxxx processors -if MACH_RP2040 +if MACH_RPXXXX -config RP2040_SELECT +config RPXXXX_SELECT bool default y select HAVE_GPIO @@ -19,6 +19,16 @@ config BOARD_DIRECTORY string default "rp2040" +###################################################################### +# Chip selection +###################################################################### + +choice + prompt "Processor model" + config MACH_RP2040 + bool "rp2040" +endchoice + config MCU string default "rp2040" @@ -54,21 +64,21 @@ config STACK_SIZE config RP2040_HAVE_STAGE2 bool -config RP2040_HAVE_BOOTLOADER +config RPXXXX_HAVE_BOOTLOADER bool default y if !RP2040_HAVE_STAGE2 choice prompt "Bootloader offset" - config RP2040_FLASH_START_0100 + config RPXXXX_FLASH_START_0100 bool "No bootloader" select RP2040_HAVE_STAGE2 - config RP2040_FLASH_START_4000 + config RPXXXX_FLASH_START_4000 bool "16KiB bootloader" endchoice config FLASH_APPLICATION_ADDRESS hex - default 0x10004000 if RP2040_FLASH_START_4000 + default 0x10004000 if RPXXXX_FLASH_START_4000 default 0x10000100 choice @@ -96,47 +106,47 @@ config RP2040_STAGE2_CLKDIV choice prompt "Communication Interface" - config RP2040_USB + config RPXXXX_USB bool "USBSERIAL" select USBSERIAL - config RP2040_SERIAL_UART0_PINS_0_1 + config RPXXXX_SERIAL_UART0_PINS_0_1 bool "UART0 on GPIO0/GPIO1" select SERIAL - config RP2040_SERIAL_UART0_PINS_12_13 + config RPXXXX_SERIAL_UART0_PINS_12_13 bool "UART0 on GPIO12/GPIO13" if LOW_LEVEL_OPTIONS select SERIAL - config RP2040_SERIAL_UART0_PINS_16_17 + config RPXXXX_SERIAL_UART0_PINS_16_17 bool "UART0 on GPIO16/GPIO17" if LOW_LEVEL_OPTIONS select SERIAL - config RP2040_SERIAL_UART0_PINS_28_29 + config RPXXXX_SERIAL_UART0_PINS_28_29 bool "UART0 on GPIO28/GPIO29" if LOW_LEVEL_OPTIONS select SERIAL - config RP2040_SERIAL_UART1_PINS_4_5 + config RPXXXX_SERIAL_UART1_PINS_4_5 bool "UART1 on GPIO4/GPIO5" if LOW_LEVEL_OPTIONS select SERIAL - config RP2040_SERIAL_UART1_PINS_8_9 + config RPXXXX_SERIAL_UART1_PINS_8_9 bool "UART1 on GPIO8/GPIO9" if LOW_LEVEL_OPTIONS select SERIAL - config RP2040_SERIAL_UART1_PINS_20_21 + config RPXXXX_SERIAL_UART1_PINS_20_21 bool "UART1 on GPIO20/GPIO21" if LOW_LEVEL_OPTIONS select SERIAL - config RP2040_SERIAL_UART1_PINS_24_25 + config RPXXXX_SERIAL_UART1_PINS_24_25 bool "UART1 on GPIO24/GPIO25" if LOW_LEVEL_OPTIONS select SERIAL - config RP2040_CANBUS + config RPXXXX_CANBUS bool "CAN bus" select CANSERIAL - config RP2040_USBCANBUS + config RPXXXX_USBCANBUS bool "USB to CAN bus bridge" select USBCANBUS endchoice -config RP2040_CANBUS_GPIO_RX +config RPXXXX_CANBUS_GPIO_RX int "CAN RX gpio number" if CANBUS default 4 range 0 29 -config RP2040_CANBUS_GPIO_TX +config RPXXXX_CANBUS_GPIO_TX int "CAN TX gpio number" if CANBUS default 5 range 0 29 |