1 files changed, 92 insertions, 1 deletions
diff --git a/src/lpc176x/gpio.c b/src/lpc176x/gpio.c
index 756b0e7b..8688ee75 100644
--- a/src/lpc176x/gpio.c
+++ b/src/lpc176x/gpio.c
@@ -5,8 +5,29 @@
 // This file may be distributed under the terms of the GNU GPLv3 license.
 
 #include "LPC17xx.h" // LPC_PINCON
-#include "internal.h" // gpio_peripheral
 #include "board/irq.h" // irq_save
+#include "command.h" // shutdown
+#include "gpio.h" // gpio_out_setup
+#include "internal.h" // gpio_peripheral
+#include "sched.h" // sched_shutdown
+
+
+/****************************************************************
+ * Pin mappings
+ ****************************************************************/
+
+#define GPIO(PORT, NUM) ((PORT) * 32 + (NUM))
+#define GPIO2PORT(PIN) ((PIN) / 32)
+#define GPIO2BIT(PIN) (1<<((PIN) % 32))
+
+static LPC_GPIO_TypeDef * const digital_regs[] = {
+    LPC_GPIO0, LPC_GPIO1, LPC_GPIO2, LPC_GPIO3, LPC_GPIO4
+};
+
+
+/****************************************************************
+ * General Purpose Input Output (GPIO) pins
+ ****************************************************************/
 
 // Set the mode and extended function of a pin
 void
@@ -26,3 +47,73 @@ gpio_peripheral(int bank, int pin, int func, int pullup)
     pinmode[bank_pos] = (pinmode[bank_pos] & mask) | mode_bits;
     irq_restore(flag);
 }
+
+
+struct gpio_out
+gpio_out_setup(uint8_t pin, uint8_t val)
+{
+    if (GPIO2PORT(pin) >= ARRAY_SIZE(digital_regs))
+        goto fail;
+    LPC_GPIO_TypeDef *regs = digital_regs[GPIO2PORT(pin)];
+    uint32_t bit = GPIO2BIT(pin);
+    irqstatus_t flag = irq_save();
+    if (val)
+        regs->FIOSET = bit;
+    else
+        regs->FIOCLR = bit;
+    regs->FIODIR |= bit;
+    irq_restore(flag);
+    return (struct gpio_out){ .regs=regs, .bit=bit };
+fail:
+    shutdown("Not an output pin");
+}
+
+void
+gpio_out_toggle_noirq(struct gpio_out g)
+{
+    LPC_GPIO_TypeDef *regs = g.regs;
+    regs->FIOPIN = regs->FIOSET ^ g.bit;
+}
+
+void
+gpio_out_toggle(struct gpio_out g)
+{
+    irqstatus_t flag = irq_save();
+    gpio_out_toggle_noirq(g);
+    irq_restore(flag);
+}
+
+void
+gpio_out_write(struct gpio_out g, uint8_t val)
+{
+    LPC_GPIO_TypeDef *regs = g.regs;
+    if (val)
+        regs->FIOSET = g.bit;
+    else
+        regs->FIOCLR = g.bit;
+}
+
+
+struct gpio_in
+gpio_in_setup(uint8_t pin, int8_t pull_up)
+{
+    if (GPIO2PORT(pin) >= ARRAY_SIZE(digital_regs))
+        goto fail;
+    uint32_t port = GPIO2PORT(pin);
+    LPC_GPIO_TypeDef *regs = digital_regs[port];
+    uint32_t bit = GPIO2BIT(pin);
+    irqstatus_t flag = irq_save();
+    gpio_peripheral(port, pin % 32, 0, pull_up);
+    regs->FIODIR &= ~bit;
+    irq_restore(flag);
+    return (struct gpio_in){ .regs=regs, .bit=bit };
+fail:
+    shutdown("Not an input pin");
+}
+
+uint8_t
+gpio_in_read(struct gpio_in g)
+{
+    LPC_GPIO_TypeDef *regs = g.regs;
+    return !!(regs->FIOPIN & g.bit);
+}