diff options
Diffstat (limited to 'lib/sam3x/include/instance/usart2.h')
| -rw-r--r-- | lib/sam3x/include/instance/usart2.h | 98 |
1 files changed, 98 insertions, 0 deletions
diff --git a/lib/sam3x/include/instance/usart2.h b/lib/sam3x/include/instance/usart2.h new file mode 100644 index 00000000..ffa59e74 --- /dev/null +++ b/lib/sam3x/include/instance/usart2.h @@ -0,0 +1,98 @@ +/* ---------------------------------------------------------------------------- */ +/* Atmel Microcontroller Software Support */ +/* SAM Software Package License */ +/* ---------------------------------------------------------------------------- */ +/* Copyright (c) %copyright_year%, Atmel Corporation */ +/* */ +/* All rights reserved. */ +/* */ +/* Redistribution and use in source and binary forms, with or without */ +/* modification, are permitted provided that the following condition is met: */ +/* */ +/* - Redistributions of source code must retain the above copyright notice, */ +/* this list of conditions and the disclaimer below. */ +/* */ +/* Atmel's name may not be used to endorse or promote products derived from */ +/* this software without specific prior written permission. */ +/* */ +/* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR */ +/* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF */ +/* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE */ +/* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, */ +/* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */ +/* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, */ +/* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF */ +/* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING */ +/* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */ +/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ +/* ---------------------------------------------------------------------------- */ + +#ifndef _SAM3XA_USART2_INSTANCE_ +#define _SAM3XA_USART2_INSTANCE_ + +/* ========== Register definition for USART2 peripheral ========== */ +#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) + #define REG_USART2_CR (0x400A0000U) /**< \brief (USART2) Control Register */ + #define REG_USART2_MR (0x400A0004U) /**< \brief (USART2) Mode Register */ + #define REG_USART2_IER (0x400A0008U) /**< \brief (USART2) Interrupt Enable Register */ + #define REG_USART2_IDR (0x400A000CU) /**< \brief (USART2) Interrupt Disable Register */ + #define REG_USART2_IMR (0x400A0010U) /**< \brief (USART2) Interrupt Mask Register */ + #define REG_USART2_CSR (0x400A0014U) /**< \brief (USART2) Channel Status Register */ + #define REG_USART2_RHR (0x400A0018U) /**< \brief (USART2) Receive Holding Register */ + #define REG_USART2_THR (0x400A001CU) /**< \brief (USART2) Transmit Holding Register */ + #define REG_USART2_BRGR (0x400A0020U) /**< \brief (USART2) Baud Rate Generator Register */ + #define REG_USART2_RTOR (0x400A0024U) /**< \brief (USART2) Receiver Time-out Register */ + #define REG_USART2_TTGR (0x400A0028U) /**< \brief (USART2) Transmitter Timeguard Register */ + #define REG_USART2_FIDI (0x400A0040U) /**< \brief (USART2) FI DI Ratio Register */ + #define REG_USART2_NER (0x400A0044U) /**< \brief (USART2) Number of Errors Register */ + #define REG_USART2_IF (0x400A004CU) /**< \brief (USART2) IrDA Filter Register */ + #define REG_USART2_MAN (0x400A0050U) /**< \brief (USART2) Manchester Configuration Register */ + #define REG_USART2_LINMR (0x400A0054U) /**< \brief (USART2) LIN Mode Register */ + #define REG_USART2_LINIR (0x400A0058U) /**< \brief (USART2) LIN Identifier Register */ + #define REG_USART2_LINBRR (0x400A005CU) /**< \brief (USART2) LIN Baud Rate Register */ + #define REG_USART2_WPMR (0x400A00E4U) /**< \brief (USART2) Write Protection Mode Register */ + #define REG_USART2_WPSR (0x400A00E8U) /**< \brief (USART2) Write Protection Status Register */ + #define REG_USART2_RPR (0x400A0100U) /**< \brief (USART2) Receive Pointer Register */ + #define REG_USART2_RCR (0x400A0104U) /**< \brief (USART2) Receive Counter Register */ + #define REG_USART2_TPR (0x400A0108U) /**< \brief (USART2) Transmit Pointer Register */ + #define REG_USART2_TCR (0x400A010CU) /**< \brief (USART2) Transmit Counter Register */ + #define REG_USART2_RNPR (0x400A0110U) /**< \brief (USART2) Receive Next Pointer Register */ + #define REG_USART2_RNCR (0x400A0114U) /**< \brief (USART2) Receive Next Counter Register */ + #define REG_USART2_TNPR (0x400A0118U) /**< \brief (USART2) Transmit Next Pointer Register */ + #define REG_USART2_TNCR (0x400A011CU) /**< \brief (USART2) Transmit Next Counter Register */ + #define REG_USART2_PTCR (0x400A0120U) /**< \brief (USART2) Transfer Control Register */ + #define REG_USART2_PTSR (0x400A0124U) /**< \brief (USART2) Transfer Status Register */ +#else + #define REG_USART2_CR (*(__O uint32_t*)0x400A0000U) /**< \brief (USART2) Control Register */ + #define REG_USART2_MR (*(__IO uint32_t*)0x400A0004U) /**< \brief (USART2) Mode Register */ + #define REG_USART2_IER (*(__O uint32_t*)0x400A0008U) /**< \brief (USART2) Interrupt Enable Register */ + #define REG_USART2_IDR (*(__O uint32_t*)0x400A000CU) /**< \brief (USART2) Interrupt Disable Register */ + #define REG_USART2_IMR (*(__I uint32_t*)0x400A0010U) /**< \brief (USART2) Interrupt Mask Register */ + #define REG_USART2_CSR (*(__I uint32_t*)0x400A0014U) /**< \brief (USART2) Channel Status Register */ + #define REG_USART2_RHR (*(__I uint32_t*)0x400A0018U) /**< \brief (USART2) Receive Holding Register */ + #define REG_USART2_THR (*(__O uint32_t*)0x400A001CU) /**< \brief (USART2) Transmit Holding Register */ + #define REG_USART2_BRGR (*(__IO uint32_t*)0x400A0020U) /**< \brief (USART2) Baud Rate Generator Register */ + #define REG_USART2_RTOR (*(__IO uint32_t*)0x400A0024U) /**< \brief (USART2) Receiver Time-out Register */ + #define REG_USART2_TTGR (*(__IO uint32_t*)0x400A0028U) /**< \brief (USART2) Transmitter Timeguard Register */ + #define REG_USART2_FIDI (*(__IO uint32_t*)0x400A0040U) /**< \brief (USART2) FI DI Ratio Register */ + #define REG_USART2_NER (*(__I uint32_t*)0x400A0044U) /**< \brief (USART2) Number of Errors Register */ + #define REG_USART2_IF (*(__IO uint32_t*)0x400A004CU) /**< \brief (USART2) IrDA Filter Register */ + #define REG_USART2_MAN (*(__IO uint32_t*)0x400A0050U) /**< \brief (USART2) Manchester Configuration Register */ + #define REG_USART2_LINMR (*(__IO uint32_t*)0x400A0054U) /**< \brief (USART2) LIN Mode Register */ + #define REG_USART2_LINIR (*(__IO uint32_t*)0x400A0058U) /**< \brief (USART2) LIN Identifier Register */ + #define REG_USART2_LINBRR (*(__I uint32_t*)0x400A005CU) /**< \brief (USART2) LIN Baud Rate Register */ + #define REG_USART2_WPMR (*(__IO uint32_t*)0x400A00E4U) /**< \brief (USART2) Write Protection Mode Register */ + #define REG_USART2_WPSR (*(__I uint32_t*)0x400A00E8U) /**< \brief (USART2) Write Protection Status Register */ + #define REG_USART2_RPR (*(__IO uint32_t*)0x400A0100U) /**< \brief (USART2) Receive Pointer Register */ + #define REG_USART2_RCR (*(__IO uint32_t*)0x400A0104U) /**< \brief (USART2) Receive Counter Register */ + #define REG_USART2_TPR (*(__IO uint32_t*)0x400A0108U) /**< \brief (USART2) Transmit Pointer Register */ + #define REG_USART2_TCR (*(__IO uint32_t*)0x400A010CU) /**< \brief (USART2) Transmit Counter Register */ + #define REG_USART2_RNPR (*(__IO uint32_t*)0x400A0110U) /**< \brief (USART2) Receive Next Pointer Register */ + #define REG_USART2_RNCR (*(__IO uint32_t*)0x400A0114U) /**< \brief (USART2) Receive Next Counter Register */ + #define REG_USART2_TNPR (*(__IO uint32_t*)0x400A0118U) /**< \brief (USART2) Transmit Next Pointer Register */ + #define REG_USART2_TNCR (*(__IO uint32_t*)0x400A011CU) /**< \brief (USART2) Transmit Next Counter Register */ + #define REG_USART2_PTCR (*(__O uint32_t*)0x400A0120U) /**< \brief (USART2) Transfer Control Register */ + #define REG_USART2_PTSR (*(__I uint32_t*)0x400A0124U) /**< \brief (USART2) Transfer Status Register */ +#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#endif /* _SAM3XA_USART2_INSTANCE_ */ |