diff options
Diffstat (limited to 'lib/rp2040/hardware/regs/usb_device_dpram.h')
| -rw-r--r-- | lib/rp2040/hardware/regs/usb_device_dpram.h | 6807 |
1 files changed, 6807 insertions, 0 deletions
diff --git a/lib/rp2040/hardware/regs/usb_device_dpram.h b/lib/rp2040/hardware/regs/usb_device_dpram.h new file mode 100644 index 00000000..6422774c --- /dev/null +++ b/lib/rp2040/hardware/regs/usb_device_dpram.h @@ -0,0 +1,6807 @@ +/** + * Copyright (c) 2021 Raspberry Pi (Trading) Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +// ============================================================================= +// Register block : USB_DEVICE_DPRAM +// Version : 1 +// Bus type : ahbl +// Description : DPRAM layout for USB device. +// ============================================================================= +#ifndef HARDWARE_REGS_USB_DEVICE_DPRAM_DEFINED +#define HARDWARE_REGS_USB_DEVICE_DPRAM_DEFINED +// ============================================================================= +// Register : USB_DEVICE_DPRAM_SETUP_PACKET_LOW +// Description : Bytes 0-3 of the SETUP packet from the host. +#define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_OFFSET _u(0x00000000) +#define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_BITS _u(0xffffffff) +#define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_SETUP_PACKET_LOW_WVALUE +// Description : None +#define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_WVALUE_RESET _u(0x0000) +#define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_WVALUE_BITS _u(0xffff0000) +#define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_WVALUE_MSB _u(31) +#define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_WVALUE_LSB _u(16) +#define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_WVALUE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_SETUP_PACKET_LOW_BREQUEST +// Description : None +#define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_BREQUEST_RESET _u(0x00) +#define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_BREQUEST_BITS _u(0x0000ff00) +#define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_BREQUEST_MSB _u(15) +#define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_BREQUEST_LSB _u(8) +#define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_BREQUEST_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_SETUP_PACKET_LOW_BMREQUESTTYPE +// Description : None +#define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_BMREQUESTTYPE_RESET _u(0x00) +#define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_BMREQUESTTYPE_BITS _u(0x000000ff) +#define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_BMREQUESTTYPE_MSB _u(7) +#define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_BMREQUESTTYPE_LSB _u(0) +#define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_BMREQUESTTYPE_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_SETUP_PACKET_HIGH +// Description : Bytes 4-7 of the setup packet from the host. +#define USB_DEVICE_DPRAM_SETUP_PACKET_HIGH_OFFSET _u(0x00000004) +#define USB_DEVICE_DPRAM_SETUP_PACKET_HIGH_BITS _u(0xffffffff) +#define USB_DEVICE_DPRAM_SETUP_PACKET_HIGH_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_SETUP_PACKET_HIGH_WLENGTH +// Description : None +#define USB_DEVICE_DPRAM_SETUP_PACKET_HIGH_WLENGTH_RESET _u(0x0000) +#define USB_DEVICE_DPRAM_SETUP_PACKET_HIGH_WLENGTH_BITS _u(0xffff0000) +#define USB_DEVICE_DPRAM_SETUP_PACKET_HIGH_WLENGTH_MSB _u(31) +#define USB_DEVICE_DPRAM_SETUP_PACKET_HIGH_WLENGTH_LSB _u(16) +#define USB_DEVICE_DPRAM_SETUP_PACKET_HIGH_WLENGTH_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_SETUP_PACKET_HIGH_WINDEX +// Description : None +#define USB_DEVICE_DPRAM_SETUP_PACKET_HIGH_WINDEX_RESET _u(0x0000) +#define USB_DEVICE_DPRAM_SETUP_PACKET_HIGH_WINDEX_BITS _u(0x0000ffff) +#define USB_DEVICE_DPRAM_SETUP_PACKET_HIGH_WINDEX_MSB _u(15) +#define USB_DEVICE_DPRAM_SETUP_PACKET_HIGH_WINDEX_LSB _u(0) +#define USB_DEVICE_DPRAM_SETUP_PACKET_HIGH_WINDEX_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP1_IN_CONTROL +// Description : None +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_OFFSET _u(0x00000008) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_BITS _u(0xfc03ffff) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENABLE +// Description : Enable this endpoint. The device will not reply to any packets +// for this endpoint if this bit is not set. +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENABLE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENABLE_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENABLE_MSB _u(31) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENABLE_LSB _u(31) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENABLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP1_IN_CONTROL_DOUBLE_BUFFERED +// Description : This endpoint is double buffered. +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_DOUBLE_BUFFERED_MSB _u(30) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_DOUBLE_BUFFERED_LSB _u(30) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_PER_BUFF +// Description : Trigger an interrupt each time a buffer is done. +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF +// Description : Trigger an interrupt each time both buffers are done. Only +// valid in double buffered mode. +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENDPOINT_TYPE +// Description : 0x0 -> Control +// 0x1 -> Isochronous +// 0x2 -> Bulk +// 0x3 -> Interrupt +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_ON_STALL +// Description : Trigger an interrupt if a STALL is sent. Intended for debug +// only. +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_ON_NAK +// Description : Trigger an interrupt if a NAK is sent. Intended for debug only. +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP1_IN_CONTROL_BUFFER_ADDRESS +// Description : 64 byte aligned buffer address for this EP (bits 0-5 are +// ignored). Relative to the start of the DPRAM. +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_BUFFER_ADDRESS_MSB _u(15) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_BUFFER_ADDRESS_LSB _u(0) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP1_OUT_CONTROL +// Description : None +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_OFFSET _u(0x0000000c) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_BITS _u(0xfc03ffff) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENABLE +// Description : Enable this endpoint. The device will not reply to any packets +// for this endpoint if this bit is not set. +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENABLE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENABLE_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENABLE_MSB _u(31) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENABLE_LSB _u(31) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENABLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP1_OUT_CONTROL_DOUBLE_BUFFERED +// Description : This endpoint is double buffered. +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_DOUBLE_BUFFERED_MSB _u(30) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_DOUBLE_BUFFERED_LSB _u(30) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_PER_BUFF +// Description : Trigger an interrupt each time a buffer is done. +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF +// Description : Trigger an interrupt each time both buffers are done. Only +// valid in double buffered mode. +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENDPOINT_TYPE +// Description : 0x0 -> Control +// 0x1 -> Isochronous +// 0x2 -> Bulk +// 0x3 -> Interrupt +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_ON_STALL +// Description : Trigger an interrupt if a STALL is sent. Intended for debug +// only. +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_ON_NAK +// Description : Trigger an interrupt if a NAK is sent. Intended for debug only. +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP1_OUT_CONTROL_BUFFER_ADDRESS +// Description : 64 byte aligned buffer address for this EP (bits 0-5 are +// ignored). Relative to the start of the DPRAM. +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_BUFFER_ADDRESS_MSB _u(15) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_BUFFER_ADDRESS_LSB _u(0) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP2_IN_CONTROL +// Description : None +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_OFFSET _u(0x00000010) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_BITS _u(0xfc03ffff) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENABLE +// Description : Enable this endpoint. The device will not reply to any packets +// for this endpoint if this bit is not set. +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENABLE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENABLE_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENABLE_MSB _u(31) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENABLE_LSB _u(31) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENABLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP2_IN_CONTROL_DOUBLE_BUFFERED +// Description : This endpoint is double buffered. +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_DOUBLE_BUFFERED_MSB _u(30) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_DOUBLE_BUFFERED_LSB _u(30) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_PER_BUFF +// Description : Trigger an interrupt each time a buffer is done. +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF +// Description : Trigger an interrupt each time both buffers are done. Only +// valid in double buffered mode. +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENDPOINT_TYPE +// Description : 0x0 -> Control +// 0x1 -> Isochronous +// 0x2 -> Bulk +// 0x3 -> Interrupt +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_ON_STALL +// Description : Trigger an interrupt if a STALL is sent. Intended for debug +// only. +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_ON_NAK +// Description : Trigger an interrupt if a NAK is sent. Intended for debug only. +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP2_IN_CONTROL_BUFFER_ADDRESS +// Description : 64 byte aligned buffer address for this EP (bits 0-5 are +// ignored). Relative to the start of the DPRAM. +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_BUFFER_ADDRESS_MSB _u(15) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_BUFFER_ADDRESS_LSB _u(0) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP2_OUT_CONTROL +// Description : None +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_OFFSET _u(0x00000014) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_BITS _u(0xfc03ffff) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENABLE +// Description : Enable this endpoint. The device will not reply to any packets +// for this endpoint if this bit is not set. +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENABLE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENABLE_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENABLE_MSB _u(31) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENABLE_LSB _u(31) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENABLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP2_OUT_CONTROL_DOUBLE_BUFFERED +// Description : This endpoint is double buffered. +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_DOUBLE_BUFFERED_MSB _u(30) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_DOUBLE_BUFFERED_LSB _u(30) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_PER_BUFF +// Description : Trigger an interrupt each time a buffer is done. +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF +// Description : Trigger an interrupt each time both buffers are done. Only +// valid in double buffered mode. +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENDPOINT_TYPE +// Description : 0x0 -> Control +// 0x1 -> Isochronous +// 0x2 -> Bulk +// 0x3 -> Interrupt +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_ON_STALL +// Description : Trigger an interrupt if a STALL is sent. Intended for debug +// only. +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_ON_NAK +// Description : Trigger an interrupt if a NAK is sent. Intended for debug only. +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP2_OUT_CONTROL_BUFFER_ADDRESS +// Description : 64 byte aligned buffer address for this EP (bits 0-5 are +// ignored). Relative to the start of the DPRAM. +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_BUFFER_ADDRESS_MSB _u(15) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_BUFFER_ADDRESS_LSB _u(0) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP3_IN_CONTROL +// Description : None +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_OFFSET _u(0x00000018) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_BITS _u(0xfc03ffff) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENABLE +// Description : Enable this endpoint. The device will not reply to any packets +// for this endpoint if this bit is not set. +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENABLE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENABLE_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENABLE_MSB _u(31) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENABLE_LSB _u(31) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENABLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP3_IN_CONTROL_DOUBLE_BUFFERED +// Description : This endpoint is double buffered. +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_DOUBLE_BUFFERED_MSB _u(30) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_DOUBLE_BUFFERED_LSB _u(30) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_PER_BUFF +// Description : Trigger an interrupt each time a buffer is done. +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF +// Description : Trigger an interrupt each time both buffers are done. Only +// valid in double buffered mode. +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENDPOINT_TYPE +// Description : 0x0 -> Control +// 0x1 -> Isochronous +// 0x2 -> Bulk +// 0x3 -> Interrupt +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_ON_STALL +// Description : Trigger an interrupt if a STALL is sent. Intended for debug +// only. +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_ON_NAK +// Description : Trigger an interrupt if a NAK is sent. Intended for debug only. +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP3_IN_CONTROL_BUFFER_ADDRESS +// Description : 64 byte aligned buffer address for this EP (bits 0-5 are +// ignored). Relative to the start of the DPRAM. +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_BUFFER_ADDRESS_MSB _u(15) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_BUFFER_ADDRESS_LSB _u(0) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP3_OUT_CONTROL +// Description : None +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_OFFSET _u(0x0000001c) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_BITS _u(0xfc03ffff) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENABLE +// Description : Enable this endpoint. The device will not reply to any packets +// for this endpoint if this bit is not set. +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENABLE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENABLE_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENABLE_MSB _u(31) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENABLE_LSB _u(31) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENABLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP3_OUT_CONTROL_DOUBLE_BUFFERED +// Description : This endpoint is double buffered. +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_DOUBLE_BUFFERED_MSB _u(30) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_DOUBLE_BUFFERED_LSB _u(30) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_PER_BUFF +// Description : Trigger an interrupt each time a buffer is done. +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF +// Description : Trigger an interrupt each time both buffers are done. Only +// valid in double buffered mode. +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENDPOINT_TYPE +// Description : 0x0 -> Control +// 0x1 -> Isochronous +// 0x2 -> Bulk +// 0x3 -> Interrupt +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_ON_STALL +// Description : Trigger an interrupt if a STALL is sent. Intended for debug +// only. +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_ON_NAK +// Description : Trigger an interrupt if a NAK is sent. Intended for debug only. +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP3_OUT_CONTROL_BUFFER_ADDRESS +// Description : 64 byte aligned buffer address for this EP (bits 0-5 are +// ignored). Relative to the start of the DPRAM. +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_BUFFER_ADDRESS_MSB _u(15) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_BUFFER_ADDRESS_LSB _u(0) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP4_IN_CONTROL +// Description : None +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_OFFSET _u(0x00000020) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_BITS _u(0xfc03ffff) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENABLE +// Description : Enable this endpoint. The device will not reply to any packets +// for this endpoint if this bit is not set. +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENABLE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENABLE_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENABLE_MSB _u(31) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENABLE_LSB _u(31) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENABLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP4_IN_CONTROL_DOUBLE_BUFFERED +// Description : This endpoint is double buffered. +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_DOUBLE_BUFFERED_MSB _u(30) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_DOUBLE_BUFFERED_LSB _u(30) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_PER_BUFF +// Description : Trigger an interrupt each time a buffer is done. +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF +// Description : Trigger an interrupt each time both buffers are done. Only +// valid in double buffered mode. +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENDPOINT_TYPE +// Description : 0x0 -> Control +// 0x1 -> Isochronous +// 0x2 -> Bulk +// 0x3 -> Interrupt +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_ON_STALL +// Description : Trigger an interrupt if a STALL is sent. Intended for debug +// only. +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_ON_NAK +// Description : Trigger an interrupt if a NAK is sent. Intended for debug only. +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP4_IN_CONTROL_BUFFER_ADDRESS +// Description : 64 byte aligned buffer address for this EP (bits 0-5 are +// ignored). Relative to the start of the DPRAM. +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_BUFFER_ADDRESS_MSB _u(15) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_BUFFER_ADDRESS_LSB _u(0) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP4_OUT_CONTROL +// Description : None +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_OFFSET _u(0x00000024) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_BITS _u(0xfc03ffff) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENABLE +// Description : Enable this endpoint. The device will not reply to any packets +// for this endpoint if this bit is not set. +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENABLE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENABLE_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENABLE_MSB _u(31) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENABLE_LSB _u(31) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENABLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP4_OUT_CONTROL_DOUBLE_BUFFERED +// Description : This endpoint is double buffered. +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_DOUBLE_BUFFERED_MSB _u(30) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_DOUBLE_BUFFERED_LSB _u(30) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_PER_BUFF +// Description : Trigger an interrupt each time a buffer is done. +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF +// Description : Trigger an interrupt each time both buffers are done. Only +// valid in double buffered mode. +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENDPOINT_TYPE +// Description : 0x0 -> Control +// 0x1 -> Isochronous +// 0x2 -> Bulk +// 0x3 -> Interrupt +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_ON_STALL +// Description : Trigger an interrupt if a STALL is sent. Intended for debug +// only. +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_ON_NAK +// Description : Trigger an interrupt if a NAK is sent. Intended for debug only. +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP4_OUT_CONTROL_BUFFER_ADDRESS +// Description : 64 byte aligned buffer address for this EP (bits 0-5 are +// ignored). Relative to the start of the DPRAM. +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_BUFFER_ADDRESS_MSB _u(15) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_BUFFER_ADDRESS_LSB _u(0) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP5_IN_CONTROL +// Description : None +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_OFFSET _u(0x00000028) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_BITS _u(0xfc03ffff) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENABLE +// Description : Enable this endpoint. The device will not reply to any packets +// for this endpoint if this bit is not set. +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENABLE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENABLE_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENABLE_MSB _u(31) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENABLE_LSB _u(31) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENABLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP5_IN_CONTROL_DOUBLE_BUFFERED +// Description : This endpoint is double buffered. +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_DOUBLE_BUFFERED_MSB _u(30) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_DOUBLE_BUFFERED_LSB _u(30) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_PER_BUFF +// Description : Trigger an interrupt each time a buffer is done. +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF +// Description : Trigger an interrupt each time both buffers are done. Only +// valid in double buffered mode. +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENDPOINT_TYPE +// Description : 0x0 -> Control +// 0x1 -> Isochronous +// 0x2 -> Bulk +// 0x3 -> Interrupt +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_ON_STALL +// Description : Trigger an interrupt if a STALL is sent. Intended for debug +// only. +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_ON_NAK +// Description : Trigger an interrupt if a NAK is sent. Intended for debug only. +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP5_IN_CONTROL_BUFFER_ADDRESS +// Description : 64 byte aligned buffer address for this EP (bits 0-5 are +// ignored). Relative to the start of the DPRAM. +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_BUFFER_ADDRESS_MSB _u(15) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_BUFFER_ADDRESS_LSB _u(0) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP5_OUT_CONTROL +// Description : None +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_OFFSET _u(0x0000002c) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_BITS _u(0xfc03ffff) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENABLE +// Description : Enable this endpoint. The device will not reply to any packets +// for this endpoint if this bit is not set. +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENABLE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENABLE_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENABLE_MSB _u(31) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENABLE_LSB _u(31) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENABLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP5_OUT_CONTROL_DOUBLE_BUFFERED +// Description : This endpoint is double buffered. +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_DOUBLE_BUFFERED_MSB _u(30) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_DOUBLE_BUFFERED_LSB _u(30) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_PER_BUFF +// Description : Trigger an interrupt each time a buffer is done. +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF +// Description : Trigger an interrupt each time both buffers are done. Only +// valid in double buffered mode. +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENDPOINT_TYPE +// Description : 0x0 -> Control +// 0x1 -> Isochronous +// 0x2 -> Bulk +// 0x3 -> Interrupt +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_ON_STALL +// Description : Trigger an interrupt if a STALL is sent. Intended for debug +// only. +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_ON_NAK +// Description : Trigger an interrupt if a NAK is sent. Intended for debug only. +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP5_OUT_CONTROL_BUFFER_ADDRESS +// Description : 64 byte aligned buffer address for this EP (bits 0-5 are +// ignored). Relative to the start of the DPRAM. +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_BUFFER_ADDRESS_MSB _u(15) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_BUFFER_ADDRESS_LSB _u(0) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP6_IN_CONTROL +// Description : None +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_OFFSET _u(0x00000030) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_BITS _u(0xfc03ffff) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENABLE +// Description : Enable this endpoint. The device will not reply to any packets +// for this endpoint if this bit is not set. +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENABLE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENABLE_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENABLE_MSB _u(31) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENABLE_LSB _u(31) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENABLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP6_IN_CONTROL_DOUBLE_BUFFERED +// Description : This endpoint is double buffered. +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_DOUBLE_BUFFERED_MSB _u(30) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_DOUBLE_BUFFERED_LSB _u(30) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_PER_BUFF +// Description : Trigger an interrupt each time a buffer is done. +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF +// Description : Trigger an interrupt each time both buffers are done. Only +// valid in double buffered mode. +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENDPOINT_TYPE +// Description : 0x0 -> Control +// 0x1 -> Isochronous +// 0x2 -> Bulk +// 0x3 -> Interrupt +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_ON_STALL +// Description : Trigger an interrupt if a STALL is sent. Intended for debug +// only. +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_ON_NAK +// Description : Trigger an interrupt if a NAK is sent. Intended for debug only. +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP6_IN_CONTROL_BUFFER_ADDRESS +// Description : 64 byte aligned buffer address for this EP (bits 0-5 are +// ignored). Relative to the start of the DPRAM. +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_BUFFER_ADDRESS_MSB _u(15) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_BUFFER_ADDRESS_LSB _u(0) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP6_OUT_CONTROL +// Description : None +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_OFFSET _u(0x00000034) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_BITS _u(0xfc03ffff) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENABLE +// Description : Enable this endpoint. The device will not reply to any packets +// for this endpoint if this bit is not set. +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENABLE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENABLE_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENABLE_MSB _u(31) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENABLE_LSB _u(31) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENABLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP6_OUT_CONTROL_DOUBLE_BUFFERED +// Description : This endpoint is double buffered. +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_DOUBLE_BUFFERED_MSB _u(30) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_DOUBLE_BUFFERED_LSB _u(30) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_PER_BUFF +// Description : Trigger an interrupt each time a buffer is done. +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF +// Description : Trigger an interrupt each time both buffers are done. Only +// valid in double buffered mode. +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENDPOINT_TYPE +// Description : 0x0 -> Control +// 0x1 -> Isochronous +// 0x2 -> Bulk +// 0x3 -> Interrupt +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_ON_STALL +// Description : Trigger an interrupt if a STALL is sent. Intended for debug +// only. +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_ON_NAK +// Description : Trigger an interrupt if a NAK is sent. Intended for debug only. +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP6_OUT_CONTROL_BUFFER_ADDRESS +// Description : 64 byte aligned buffer address for this EP (bits 0-5 are +// ignored). Relative to the start of the DPRAM. +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_BUFFER_ADDRESS_MSB _u(15) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_BUFFER_ADDRESS_LSB _u(0) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP7_IN_CONTROL +// Description : None +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_OFFSET _u(0x00000038) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_BITS _u(0xfc03ffff) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENABLE +// Description : Enable this endpoint. The device will not reply to any packets +// for this endpoint if this bit is not set. +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENABLE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENABLE_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENABLE_MSB _u(31) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENABLE_LSB _u(31) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENABLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP7_IN_CONTROL_DOUBLE_BUFFERED +// Description : This endpoint is double buffered. +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_DOUBLE_BUFFERED_MSB _u(30) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_DOUBLE_BUFFERED_LSB _u(30) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_PER_BUFF +// Description : Trigger an interrupt each time a buffer is done. +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF +// Description : Trigger an interrupt each time both buffers are done. Only +// valid in double buffered mode. +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENDPOINT_TYPE +// Description : 0x0 -> Control +// 0x1 -> Isochronous +// 0x2 -> Bulk +// 0x3 -> Interrupt +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_ON_STALL +// Description : Trigger an interrupt if a STALL is sent. Intended for debug +// only. +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_ON_NAK +// Description : Trigger an interrupt if a NAK is sent. Intended for debug only. +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP7_IN_CONTROL_BUFFER_ADDRESS +// Description : 64 byte aligned buffer address for this EP (bits 0-5 are +// ignored). Relative to the start of the DPRAM. +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_BUFFER_ADDRESS_MSB _u(15) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_BUFFER_ADDRESS_LSB _u(0) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP7_OUT_CONTROL +// Description : None +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_OFFSET _u(0x0000003c) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_BITS _u(0xfc03ffff) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENABLE +// Description : Enable this endpoint. The device will not reply to any packets +// for this endpoint if this bit is not set. +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENABLE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENABLE_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENABLE_MSB _u(31) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENABLE_LSB _u(31) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENABLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP7_OUT_CONTROL_DOUBLE_BUFFERED +// Description : This endpoint is double buffered. +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_DOUBLE_BUFFERED_MSB _u(30) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_DOUBLE_BUFFERED_LSB _u(30) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_PER_BUFF +// Description : Trigger an interrupt each time a buffer is done. +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF +// Description : Trigger an interrupt each time both buffers are done. Only +// valid in double buffered mode. +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENDPOINT_TYPE +// Description : 0x0 -> Control +// 0x1 -> Isochronous +// 0x2 -> Bulk +// 0x3 -> Interrupt +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_ON_STALL +// Description : Trigger an interrupt if a STALL is sent. Intended for debug +// only. +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_ON_NAK +// Description : Trigger an interrupt if a NAK is sent. Intended for debug only. +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP7_OUT_CONTROL_BUFFER_ADDRESS +// Description : 64 byte aligned buffer address for this EP (bits 0-5 are +// ignored). Relative to the start of the DPRAM. +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_BUFFER_ADDRESS_MSB _u(15) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_BUFFER_ADDRESS_LSB _u(0) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP8_IN_CONTROL +// Description : None +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_OFFSET _u(0x00000040) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_BITS _u(0xfc03ffff) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENABLE +// Description : Enable this endpoint. The device will not reply to any packets +// for this endpoint if this bit is not set. +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENABLE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENABLE_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENABLE_MSB _u(31) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENABLE_LSB _u(31) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENABLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP8_IN_CONTROL_DOUBLE_BUFFERED +// Description : This endpoint is double buffered. +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_DOUBLE_BUFFERED_MSB _u(30) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_DOUBLE_BUFFERED_LSB _u(30) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_PER_BUFF +// Description : Trigger an interrupt each time a buffer is done. +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF +// Description : Trigger an interrupt each time both buffers are done. Only +// valid in double buffered mode. +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENDPOINT_TYPE +// Description : 0x0 -> Control +// 0x1 -> Isochronous +// 0x2 -> Bulk +// 0x3 -> Interrupt +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_ON_STALL +// Description : Trigger an interrupt if a STALL is sent. Intended for debug +// only. +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_ON_NAK +// Description : Trigger an interrupt if a NAK is sent. Intended for debug only. +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP8_IN_CONTROL_BUFFER_ADDRESS +// Description : 64 byte aligned buffer address for this EP (bits 0-5 are +// ignored). Relative to the start of the DPRAM. +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_BUFFER_ADDRESS_MSB _u(15) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_BUFFER_ADDRESS_LSB _u(0) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP8_OUT_CONTROL +// Description : None +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_OFFSET _u(0x00000044) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_BITS _u(0xfc03ffff) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENABLE +// Description : Enable this endpoint. The device will not reply to any packets +// for this endpoint if this bit is not set. +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENABLE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENABLE_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENABLE_MSB _u(31) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENABLE_LSB _u(31) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENABLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP8_OUT_CONTROL_DOUBLE_BUFFERED +// Description : This endpoint is double buffered. +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_DOUBLE_BUFFERED_MSB _u(30) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_DOUBLE_BUFFERED_LSB _u(30) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_PER_BUFF +// Description : Trigger an interrupt each time a buffer is done. +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF +// Description : Trigger an interrupt each time both buffers are done. Only +// valid in double buffered mode. +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENDPOINT_TYPE +// Description : 0x0 -> Control +// 0x1 -> Isochronous +// 0x2 -> Bulk +// 0x3 -> Interrupt +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_ON_STALL +// Description : Trigger an interrupt if a STALL is sent. Intended for debug +// only. +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_ON_NAK +// Description : Trigger an interrupt if a NAK is sent. Intended for debug only. +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP8_OUT_CONTROL_BUFFER_ADDRESS +// Description : 64 byte aligned buffer address for this EP (bits 0-5 are +// ignored). Relative to the start of the DPRAM. +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_BUFFER_ADDRESS_MSB _u(15) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_BUFFER_ADDRESS_LSB _u(0) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP9_IN_CONTROL +// Description : None +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_OFFSET _u(0x00000048) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_BITS _u(0xfc03ffff) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENABLE +// Description : Enable this endpoint. The device will not reply to any packets +// for this endpoint if this bit is not set. +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENABLE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENABLE_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENABLE_MSB _u(31) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENABLE_LSB _u(31) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENABLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP9_IN_CONTROL_DOUBLE_BUFFERED +// Description : This endpoint is double buffered. +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_DOUBLE_BUFFERED_MSB _u(30) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_DOUBLE_BUFFERED_LSB _u(30) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_PER_BUFF +// Description : Trigger an interrupt each time a buffer is done. +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF +// Description : Trigger an interrupt each time both buffers are done. Only +// valid in double buffered mode. +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENDPOINT_TYPE +// Description : 0x0 -> Control +// 0x1 -> Isochronous +// 0x2 -> Bulk +// 0x3 -> Interrupt +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_ON_STALL +// Description : Trigger an interrupt if a STALL is sent. Intended for debug +// only. +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_ON_NAK +// Description : Trigger an interrupt if a NAK is sent. Intended for debug only. +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP9_IN_CONTROL_BUFFER_ADDRESS +// Description : 64 byte aligned buffer address for this EP (bits 0-5 are +// ignored). Relative to the start of the DPRAM. +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_BUFFER_ADDRESS_MSB _u(15) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_BUFFER_ADDRESS_LSB _u(0) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP9_OUT_CONTROL +// Description : None +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_OFFSET _u(0x0000004c) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_BITS _u(0xfc03ffff) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENABLE +// Description : Enable this endpoint. The device will not reply to any packets +// for this endpoint if this bit is not set. +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENABLE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENABLE_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENABLE_MSB _u(31) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENABLE_LSB _u(31) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENABLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP9_OUT_CONTROL_DOUBLE_BUFFERED +// Description : This endpoint is double buffered. +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_DOUBLE_BUFFERED_MSB _u(30) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_DOUBLE_BUFFERED_LSB _u(30) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_PER_BUFF +// Description : Trigger an interrupt each time a buffer is done. +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF +// Description : Trigger an interrupt each time both buffers are done. Only +// valid in double buffered mode. +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENDPOINT_TYPE +// Description : 0x0 -> Control +// 0x1 -> Isochronous +// 0x2 -> Bulk +// 0x3 -> Interrupt +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_ON_STALL +// Description : Trigger an interrupt if a STALL is sent. Intended for debug +// only. +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_ON_NAK +// Description : Trigger an interrupt if a NAK is sent. Intended for debug only. +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP9_OUT_CONTROL_BUFFER_ADDRESS +// Description : 64 byte aligned buffer address for this EP (bits 0-5 are +// ignored). Relative to the start of the DPRAM. +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_BUFFER_ADDRESS_MSB _u(15) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_BUFFER_ADDRESS_LSB _u(0) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP10_IN_CONTROL +// Description : None +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_OFFSET _u(0x00000050) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_BITS _u(0xfc03ffff) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENABLE +// Description : Enable this endpoint. The device will not reply to any packets +// for this endpoint if this bit is not set. +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENABLE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENABLE_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENABLE_MSB _u(31) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENABLE_LSB _u(31) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENABLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP10_IN_CONTROL_DOUBLE_BUFFERED +// Description : This endpoint is double buffered. +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_DOUBLE_BUFFERED_MSB _u(30) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_DOUBLE_BUFFERED_LSB _u(30) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_PER_BUFF +// Description : Trigger an interrupt each time a buffer is done. +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF +// Description : Trigger an interrupt each time both buffers are done. Only +// valid in double buffered mode. +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENDPOINT_TYPE +// Description : 0x0 -> Control +// 0x1 -> Isochronous +// 0x2 -> Bulk +// 0x3 -> Interrupt +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_ON_STALL +// Description : Trigger an interrupt if a STALL is sent. Intended for debug +// only. +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_ON_NAK +// Description : Trigger an interrupt if a NAK is sent. Intended for debug only. +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP10_IN_CONTROL_BUFFER_ADDRESS +// Description : 64 byte aligned buffer address for this EP (bits 0-5 are +// ignored). Relative to the start of the DPRAM. +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_BUFFER_ADDRESS_MSB _u(15) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_BUFFER_ADDRESS_LSB _u(0) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP10_OUT_CONTROL +// Description : None +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_OFFSET _u(0x00000054) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_BITS _u(0xfc03ffff) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENABLE +// Description : Enable this endpoint. The device will not reply to any packets +// for this endpoint if this bit is not set. +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENABLE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENABLE_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENABLE_MSB _u(31) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENABLE_LSB _u(31) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENABLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP10_OUT_CONTROL_DOUBLE_BUFFERED +// Description : This endpoint is double buffered. +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_DOUBLE_BUFFERED_MSB _u(30) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_DOUBLE_BUFFERED_LSB _u(30) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_PER_BUFF +// Description : Trigger an interrupt each time a buffer is done. +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF +// Description : Trigger an interrupt each time both buffers are done. Only +// valid in double buffered mode. +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENDPOINT_TYPE +// Description : 0x0 -> Control +// 0x1 -> Isochronous +// 0x2 -> Bulk +// 0x3 -> Interrupt +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_ON_STALL +// Description : Trigger an interrupt if a STALL is sent. Intended for debug +// only. +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_ON_NAK +// Description : Trigger an interrupt if a NAK is sent. Intended for debug only. +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP10_OUT_CONTROL_BUFFER_ADDRESS +// Description : 64 byte aligned buffer address for this EP (bits 0-5 are +// ignored). Relative to the start of the DPRAM. +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_BUFFER_ADDRESS_MSB _u(15) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_BUFFER_ADDRESS_LSB _u(0) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP11_IN_CONTROL +// Description : None +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_OFFSET _u(0x00000058) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_BITS _u(0xfc03ffff) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENABLE +// Description : Enable this endpoint. The device will not reply to any packets +// for this endpoint if this bit is not set. +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENABLE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENABLE_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENABLE_MSB _u(31) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENABLE_LSB _u(31) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENABLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP11_IN_CONTROL_DOUBLE_BUFFERED +// Description : This endpoint is double buffered. +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_DOUBLE_BUFFERED_MSB _u(30) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_DOUBLE_BUFFERED_LSB _u(30) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_PER_BUFF +// Description : Trigger an interrupt each time a buffer is done. +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF +// Description : Trigger an interrupt each time both buffers are done. Only +// valid in double buffered mode. +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENDPOINT_TYPE +// Description : 0x0 -> Control +// 0x1 -> Isochronous +// 0x2 -> Bulk +// 0x3 -> Interrupt +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_ON_STALL +// Description : Trigger an interrupt if a STALL is sent. Intended for debug +// only. +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_ON_NAK +// Description : Trigger an interrupt if a NAK is sent. Intended for debug only. +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP11_IN_CONTROL_BUFFER_ADDRESS +// Description : 64 byte aligned buffer address for this EP (bits 0-5 are +// ignored). Relative to the start of the DPRAM. +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_BUFFER_ADDRESS_MSB _u(15) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_BUFFER_ADDRESS_LSB _u(0) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP11_OUT_CONTROL +// Description : None +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_OFFSET _u(0x0000005c) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_BITS _u(0xfc03ffff) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENABLE +// Description : Enable this endpoint. The device will not reply to any packets +// for this endpoint if this bit is not set. +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENABLE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENABLE_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENABLE_MSB _u(31) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENABLE_LSB _u(31) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENABLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP11_OUT_CONTROL_DOUBLE_BUFFERED +// Description : This endpoint is double buffered. +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_DOUBLE_BUFFERED_MSB _u(30) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_DOUBLE_BUFFERED_LSB _u(30) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_PER_BUFF +// Description : Trigger an interrupt each time a buffer is done. +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF +// Description : Trigger an interrupt each time both buffers are done. Only +// valid in double buffered mode. +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENDPOINT_TYPE +// Description : 0x0 -> Control +// 0x1 -> Isochronous +// 0x2 -> Bulk +// 0x3 -> Interrupt +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_ON_STALL +// Description : Trigger an interrupt if a STALL is sent. Intended for debug +// only. +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_ON_NAK +// Description : Trigger an interrupt if a NAK is sent. Intended for debug only. +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP11_OUT_CONTROL_BUFFER_ADDRESS +// Description : 64 byte aligned buffer address for this EP (bits 0-5 are +// ignored). Relative to the start of the DPRAM. +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_BUFFER_ADDRESS_MSB _u(15) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_BUFFER_ADDRESS_LSB _u(0) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP12_IN_CONTROL +// Description : None +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_OFFSET _u(0x00000060) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_BITS _u(0xfc03ffff) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENABLE +// Description : Enable this endpoint. The device will not reply to any packets +// for this endpoint if this bit is not set. +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENABLE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENABLE_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENABLE_MSB _u(31) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENABLE_LSB _u(31) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENABLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP12_IN_CONTROL_DOUBLE_BUFFERED +// Description : This endpoint is double buffered. +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_DOUBLE_BUFFERED_MSB _u(30) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_DOUBLE_BUFFERED_LSB _u(30) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_PER_BUFF +// Description : Trigger an interrupt each time a buffer is done. +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF +// Description : Trigger an interrupt each time both buffers are done. Only +// valid in double buffered mode. +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENDPOINT_TYPE +// Description : 0x0 -> Control +// 0x1 -> Isochronous +// 0x2 -> Bulk +// 0x3 -> Interrupt +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_ON_STALL +// Description : Trigger an interrupt if a STALL is sent. Intended for debug +// only. +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_ON_NAK +// Description : Trigger an interrupt if a NAK is sent. Intended for debug only. +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP12_IN_CONTROL_BUFFER_ADDRESS +// Description : 64 byte aligned buffer address for this EP (bits 0-5 are +// ignored). Relative to the start of the DPRAM. +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_BUFFER_ADDRESS_MSB _u(15) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_BUFFER_ADDRESS_LSB _u(0) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP12_OUT_CONTROL +// Description : None +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_OFFSET _u(0x00000064) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_BITS _u(0xfc03ffff) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENABLE +// Description : Enable this endpoint. The device will not reply to any packets +// for this endpoint if this bit is not set. +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENABLE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENABLE_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENABLE_MSB _u(31) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENABLE_LSB _u(31) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENABLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP12_OUT_CONTROL_DOUBLE_BUFFERED +// Description : This endpoint is double buffered. +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_DOUBLE_BUFFERED_MSB _u(30) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_DOUBLE_BUFFERED_LSB _u(30) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_PER_BUFF +// Description : Trigger an interrupt each time a buffer is done. +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF +// Description : Trigger an interrupt each time both buffers are done. Only +// valid in double buffered mode. +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENDPOINT_TYPE +// Description : 0x0 -> Control +// 0x1 -> Isochronous +// 0x2 -> Bulk +// 0x3 -> Interrupt +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_ON_STALL +// Description : Trigger an interrupt if a STALL is sent. Intended for debug +// only. +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_ON_NAK +// Description : Trigger an interrupt if a NAK is sent. Intended for debug only. +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP12_OUT_CONTROL_BUFFER_ADDRESS +// Description : 64 byte aligned buffer address for this EP (bits 0-5 are +// ignored). Relative to the start of the DPRAM. +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_BUFFER_ADDRESS_MSB _u(15) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_BUFFER_ADDRESS_LSB _u(0) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP13_IN_CONTROL +// Description : None +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_OFFSET _u(0x00000068) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_BITS _u(0xfc03ffff) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENABLE +// Description : Enable this endpoint. The device will not reply to any packets +// for this endpoint if this bit is not set. +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENABLE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENABLE_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENABLE_MSB _u(31) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENABLE_LSB _u(31) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENABLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP13_IN_CONTROL_DOUBLE_BUFFERED +// Description : This endpoint is double buffered. +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_DOUBLE_BUFFERED_MSB _u(30) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_DOUBLE_BUFFERED_LSB _u(30) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_PER_BUFF +// Description : Trigger an interrupt each time a buffer is done. +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF +// Description : Trigger an interrupt each time both buffers are done. Only +// valid in double buffered mode. +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENDPOINT_TYPE +// Description : 0x0 -> Control +// 0x1 -> Isochronous +// 0x2 -> Bulk +// 0x3 -> Interrupt +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_ON_STALL +// Description : Trigger an interrupt if a STALL is sent. Intended for debug +// only. +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_ON_NAK +// Description : Trigger an interrupt if a NAK is sent. Intended for debug only. +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP13_IN_CONTROL_BUFFER_ADDRESS +// Description : 64 byte aligned buffer address for this EP (bits 0-5 are +// ignored). Relative to the start of the DPRAM. +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_BUFFER_ADDRESS_MSB _u(15) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_BUFFER_ADDRESS_LSB _u(0) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP13_OUT_CONTROL +// Description : None +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_OFFSET _u(0x0000006c) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_BITS _u(0xfc03ffff) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENABLE +// Description : Enable this endpoint. The device will not reply to any packets +// for this endpoint if this bit is not set. +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENABLE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENABLE_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENABLE_MSB _u(31) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENABLE_LSB _u(31) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENABLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP13_OUT_CONTROL_DOUBLE_BUFFERED +// Description : This endpoint is double buffered. +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_DOUBLE_BUFFERED_MSB _u(30) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_DOUBLE_BUFFERED_LSB _u(30) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_PER_BUFF +// Description : Trigger an interrupt each time a buffer is done. +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF +// Description : Trigger an interrupt each time both buffers are done. Only +// valid in double buffered mode. +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENDPOINT_TYPE +// Description : 0x0 -> Control +// 0x1 -> Isochronous +// 0x2 -> Bulk +// 0x3 -> Interrupt +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_ON_STALL +// Description : Trigger an interrupt if a STALL is sent. Intended for debug +// only. +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_ON_NAK +// Description : Trigger an interrupt if a NAK is sent. Intended for debug only. +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP13_OUT_CONTROL_BUFFER_ADDRESS +// Description : 64 byte aligned buffer address for this EP (bits 0-5 are +// ignored). Relative to the start of the DPRAM. +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_BUFFER_ADDRESS_MSB _u(15) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_BUFFER_ADDRESS_LSB _u(0) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP14_IN_CONTROL +// Description : None +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_OFFSET _u(0x00000070) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_BITS _u(0xfc03ffff) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENABLE +// Description : Enable this endpoint. The device will not reply to any packets +// for this endpoint if this bit is not set. +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENABLE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENABLE_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENABLE_MSB _u(31) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENABLE_LSB _u(31) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENABLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP14_IN_CONTROL_DOUBLE_BUFFERED +// Description : This endpoint is double buffered. +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_DOUBLE_BUFFERED_MSB _u(30) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_DOUBLE_BUFFERED_LSB _u(30) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_PER_BUFF +// Description : Trigger an interrupt each time a buffer is done. +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF +// Description : Trigger an interrupt each time both buffers are done. Only +// valid in double buffered mode. +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENDPOINT_TYPE +// Description : 0x0 -> Control +// 0x1 -> Isochronous +// 0x2 -> Bulk +// 0x3 -> Interrupt +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_ON_STALL +// Description : Trigger an interrupt if a STALL is sent. Intended for debug +// only. +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_ON_NAK +// Description : Trigger an interrupt if a NAK is sent. Intended for debug only. +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP14_IN_CONTROL_BUFFER_ADDRESS +// Description : 64 byte aligned buffer address for this EP (bits 0-5 are +// ignored). Relative to the start of the DPRAM. +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_BUFFER_ADDRESS_MSB _u(15) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_BUFFER_ADDRESS_LSB _u(0) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP14_OUT_CONTROL +// Description : None +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_OFFSET _u(0x00000074) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_BITS _u(0xfc03ffff) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENABLE +// Description : Enable this endpoint. The device will not reply to any packets +// for this endpoint if this bit is not set. +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENABLE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENABLE_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENABLE_MSB _u(31) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENABLE_LSB _u(31) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENABLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP14_OUT_CONTROL_DOUBLE_BUFFERED +// Description : This endpoint is double buffered. +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_DOUBLE_BUFFERED_MSB _u(30) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_DOUBLE_BUFFERED_LSB _u(30) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_PER_BUFF +// Description : Trigger an interrupt each time a buffer is done. +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF +// Description : Trigger an interrupt each time both buffers are done. Only +// valid in double buffered mode. +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENDPOINT_TYPE +// Description : 0x0 -> Control +// 0x1 -> Isochronous +// 0x2 -> Bulk +// 0x3 -> Interrupt +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_ON_STALL +// Description : Trigger an interrupt if a STALL is sent. Intended for debug +// only. +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_ON_NAK +// Description : Trigger an interrupt if a NAK is sent. Intended for debug only. +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP14_OUT_CONTROL_BUFFER_ADDRESS +// Description : 64 byte aligned buffer address for this EP (bits 0-5 are +// ignored). Relative to the start of the DPRAM. +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_BUFFER_ADDRESS_MSB _u(15) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_BUFFER_ADDRESS_LSB _u(0) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP15_IN_CONTROL +// Description : None +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_OFFSET _u(0x00000078) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_BITS _u(0xfc03ffff) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENABLE +// Description : Enable this endpoint. The device will not reply to any packets +// for this endpoint if this bit is not set. +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENABLE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENABLE_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENABLE_MSB _u(31) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENABLE_LSB _u(31) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENABLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP15_IN_CONTROL_DOUBLE_BUFFERED +// Description : This endpoint is double buffered. +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_DOUBLE_BUFFERED_MSB _u(30) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_DOUBLE_BUFFERED_LSB _u(30) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_PER_BUFF +// Description : Trigger an interrupt each time a buffer is done. +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF +// Description : Trigger an interrupt each time both buffers are done. Only +// valid in double buffered mode. +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENDPOINT_TYPE +// Description : 0x0 -> Control +// 0x1 -> Isochronous +// 0x2 -> Bulk +// 0x3 -> Interrupt +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_ON_STALL +// Description : Trigger an interrupt if a STALL is sent. Intended for debug +// only. +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_ON_NAK +// Description : Trigger an interrupt if a NAK is sent. Intended for debug only. +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP15_IN_CONTROL_BUFFER_ADDRESS +// Description : 64 byte aligned buffer address for this EP (bits 0-5 are +// ignored). Relative to the start of the DPRAM. +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_BUFFER_ADDRESS_MSB _u(15) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_BUFFER_ADDRESS_LSB _u(0) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP15_OUT_CONTROL +// Description : None +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_OFFSET _u(0x0000007c) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_BITS _u(0xfc03ffff) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENABLE +// Description : Enable this endpoint. The device will not reply to any packets +// for this endpoint if this bit is not set. +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENABLE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENABLE_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENABLE_MSB _u(31) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENABLE_LSB _u(31) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENABLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP15_OUT_CONTROL_DOUBLE_BUFFERED +// Description : This endpoint is double buffered. +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_DOUBLE_BUFFERED_MSB _u(30) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_DOUBLE_BUFFERED_LSB _u(30) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_PER_BUFF +// Description : Trigger an interrupt each time a buffer is done. +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF +// Description : Trigger an interrupt each time both buffers are done. Only +// valid in double buffered mode. +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENDPOINT_TYPE +// Description : 0x0 -> Control +// 0x1 -> Isochronous +// 0x2 -> Bulk +// 0x3 -> Interrupt +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_ON_STALL +// Description : Trigger an interrupt if a STALL is sent. Intended for debug +// only. +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_ON_NAK +// Description : Trigger an interrupt if a NAK is sent. Intended for debug only. +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP15_OUT_CONTROL_BUFFER_ADDRESS +// Description : 64 byte aligned buffer address for this EP (bits 0-5 are +// ignored). Relative to the start of the DPRAM. +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_BUFFER_ADDRESS_MSB _u(15) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_BUFFER_ADDRESS_LSB _u(0) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL +// Description : Buffer control for both buffers of an endpoint. Fields ending +// in a _1 are for buffer 1. +// Fields ending in a _0 are for buffer 0. Buffer 1 controls are +// only valid if the endpoint is in double buffered mode. +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_OFFSET _u(0x00000080) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_BITS _u(0xffffffff) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_FULL_1 +// Description : Buffer 1 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_FULL_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_FULL_1_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_FULL_1_MSB _u(31) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_FULL_1_LSB _u(31) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_FULL_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LAST_1 +// Description : Buffer 1 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LAST_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LAST_1_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LAST_1_MSB _u(30) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LAST_1_LSB _u(30) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LAST_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_PID_1 +// Description : The data pid of buffer 1. +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_PID_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_PID_1_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_PID_1_MSB _u(29) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_PID_1_LSB _u(29) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_PID_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET +// Description : The number of bytes buffer 1 is offset from buffer 0 in +// Isochronous mode. Only valid in double buffered mode for an +// Isochronous endpoint. +// For a non Isochronous endpoint the offset is always 64 bytes. +// 0x0 -> 128 +// 0x1 -> 256 +// 0x2 -> 512 +// 0x3 -> 1024 +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_AVAILABLE_1 +// Description : Buffer 1 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_AVAILABLE_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_AVAILABLE_1_BITS _u(0x04000000) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_AVAILABLE_1_MSB _u(26) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_AVAILABLE_1_LSB _u(26) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_AVAILABLE_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LENGTH_1 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LENGTH_1_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LENGTH_1_BITS _u(0x03ff0000) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LENGTH_1_MSB _u(25) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LENGTH_1_LSB _u(16) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LENGTH_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_FULL_0 +// Description : Buffer 0 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_FULL_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_FULL_0_BITS _u(0x00008000) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_FULL_0_MSB _u(15) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_FULL_0_LSB _u(15) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_FULL_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LAST_0 +// Description : Buffer 0 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LAST_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LAST_0_BITS _u(0x00004000) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LAST_0_MSB _u(14) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LAST_0_LSB _u(14) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LAST_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_PID_0 +// Description : The data pid of buffer 0. +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_PID_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_PID_0_BITS _u(0x00002000) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_PID_0_MSB _u(13) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_PID_0_LSB _u(13) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_PID_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_RESET +// Description : Reset the buffer selector to buffer 0. +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_RESET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_RESET_BITS _u(0x00001000) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_RESET_MSB _u(12) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_RESET_LSB _u(12) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_RESET_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_STALL +// Description : Reply with a stall (valid for both buffers). +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_STALL_BITS _u(0x00000800) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_STALL_MSB _u(11) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_STALL_LSB _u(11) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_AVAILABLE_0 +// Description : Buffer 0 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_AVAILABLE_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_AVAILABLE_0_BITS _u(0x00000400) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_AVAILABLE_0_MSB _u(10) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_AVAILABLE_0_LSB _u(10) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LENGTH_0 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LENGTH_0_MSB _u(9) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LENGTH_0_LSB _u(0) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LENGTH_0_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL +// Description : Buffer control for both buffers of an endpoint. Fields ending +// in a _1 are for buffer 1. +// Fields ending in a _0 are for buffer 0. Buffer 1 controls are +// only valid if the endpoint is in double buffered mode. +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_OFFSET _u(0x00000084) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_BITS _u(0xffffffff) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_FULL_1 +// Description : Buffer 1 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_FULL_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_FULL_1_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_FULL_1_MSB _u(31) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_FULL_1_LSB _u(31) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_FULL_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LAST_1 +// Description : Buffer 1 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LAST_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LAST_1_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LAST_1_MSB _u(30) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LAST_1_LSB _u(30) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LAST_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_PID_1 +// Description : The data pid of buffer 1. +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_PID_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_PID_1_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_PID_1_MSB _u(29) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_PID_1_LSB _u(29) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_PID_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSE +// T +// Description : The number of bytes buffer 1 is offset from buffer 0 in +// Isochronous mode. Only valid in double buffered mode for an +// Isochronous endpoint. +// For a non Isochronous endpoint the offset is always 64 bytes. +// 0x0 -> 128 +// 0x1 -> 256 +// 0x2 -> 512 +// 0x3 -> 1024 +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_AVAILABLE_1 +// Description : Buffer 1 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_AVAILABLE_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_AVAILABLE_1_BITS _u(0x04000000) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_AVAILABLE_1_MSB _u(26) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_AVAILABLE_1_LSB _u(26) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_AVAILABLE_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LENGTH_1 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LENGTH_1_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LENGTH_1_BITS _u(0x03ff0000) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LENGTH_1_MSB _u(25) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LENGTH_1_LSB _u(16) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LENGTH_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_FULL_0 +// Description : Buffer 0 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_FULL_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_FULL_0_BITS _u(0x00008000) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_FULL_0_MSB _u(15) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_FULL_0_LSB _u(15) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_FULL_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LAST_0 +// Description : Buffer 0 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LAST_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LAST_0_BITS _u(0x00004000) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LAST_0_MSB _u(14) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LAST_0_LSB _u(14) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LAST_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_PID_0 +// Description : The data pid of buffer 0. +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_PID_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_PID_0_BITS _u(0x00002000) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_PID_0_MSB _u(13) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_PID_0_LSB _u(13) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_PID_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_RESET +// Description : Reset the buffer selector to buffer 0. +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_RESET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_RESET_BITS _u(0x00001000) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_RESET_MSB _u(12) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_RESET_LSB _u(12) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_RESET_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_STALL +// Description : Reply with a stall (valid for both buffers). +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_STALL_BITS _u(0x00000800) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_STALL_MSB _u(11) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_STALL_LSB _u(11) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_AVAILABLE_0 +// Description : Buffer 0 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_AVAILABLE_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_AVAILABLE_0_BITS _u(0x00000400) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_AVAILABLE_0_MSB _u(10) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_AVAILABLE_0_LSB _u(10) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LENGTH_0 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LENGTH_0_MSB _u(9) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LENGTH_0_LSB _u(0) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LENGTH_0_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL +// Description : Buffer control for both buffers of an endpoint. Fields ending +// in a _1 are for buffer 1. +// Fields ending in a _0 are for buffer 0. Buffer 1 controls are +// only valid if the endpoint is in double buffered mode. +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_OFFSET _u(0x00000088) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_BITS _u(0xffffffff) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_FULL_1 +// Description : Buffer 1 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_FULL_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_FULL_1_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_FULL_1_MSB _u(31) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_FULL_1_LSB _u(31) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_FULL_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LAST_1 +// Description : Buffer 1 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LAST_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LAST_1_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LAST_1_MSB _u(30) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LAST_1_LSB _u(30) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LAST_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_PID_1 +// Description : The data pid of buffer 1. +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_PID_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_PID_1_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_PID_1_MSB _u(29) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_PID_1_LSB _u(29) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_PID_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET +// Description : The number of bytes buffer 1 is offset from buffer 0 in +// Isochronous mode. Only valid in double buffered mode for an +// Isochronous endpoint. +// For a non Isochronous endpoint the offset is always 64 bytes. +// 0x0 -> 128 +// 0x1 -> 256 +// 0x2 -> 512 +// 0x3 -> 1024 +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_AVAILABLE_1 +// Description : Buffer 1 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_AVAILABLE_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_AVAILABLE_1_BITS _u(0x04000000) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_AVAILABLE_1_MSB _u(26) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_AVAILABLE_1_LSB _u(26) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_AVAILABLE_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LENGTH_1 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LENGTH_1_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LENGTH_1_BITS _u(0x03ff0000) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LENGTH_1_MSB _u(25) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LENGTH_1_LSB _u(16) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LENGTH_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_FULL_0 +// Description : Buffer 0 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_FULL_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_FULL_0_BITS _u(0x00008000) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_FULL_0_MSB _u(15) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_FULL_0_LSB _u(15) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_FULL_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LAST_0 +// Description : Buffer 0 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LAST_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LAST_0_BITS _u(0x00004000) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LAST_0_MSB _u(14) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LAST_0_LSB _u(14) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LAST_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_PID_0 +// Description : The data pid of buffer 0. +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_PID_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_PID_0_BITS _u(0x00002000) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_PID_0_MSB _u(13) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_PID_0_LSB _u(13) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_PID_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_RESET +// Description : Reset the buffer selector to buffer 0. +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_RESET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_RESET_BITS _u(0x00001000) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_RESET_MSB _u(12) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_RESET_LSB _u(12) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_RESET_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_STALL +// Description : Reply with a stall (valid for both buffers). +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_STALL_BITS _u(0x00000800) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_STALL_MSB _u(11) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_STALL_LSB _u(11) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_AVAILABLE_0 +// Description : Buffer 0 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_AVAILABLE_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_AVAILABLE_0_BITS _u(0x00000400) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_AVAILABLE_0_MSB _u(10) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_AVAILABLE_0_LSB _u(10) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LENGTH_0 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LENGTH_0_MSB _u(9) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LENGTH_0_LSB _u(0) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LENGTH_0_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL +// Description : Buffer control for both buffers of an endpoint. Fields ending +// in a _1 are for buffer 1. +// Fields ending in a _0 are for buffer 0. Buffer 1 controls are +// only valid if the endpoint is in double buffered mode. +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_OFFSET _u(0x0000008c) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_BITS _u(0xffffffff) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_FULL_1 +// Description : Buffer 1 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_FULL_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_FULL_1_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_FULL_1_MSB _u(31) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_FULL_1_LSB _u(31) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_FULL_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LAST_1 +// Description : Buffer 1 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LAST_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LAST_1_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LAST_1_MSB _u(30) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LAST_1_LSB _u(30) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LAST_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_PID_1 +// Description : The data pid of buffer 1. +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_PID_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_PID_1_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_PID_1_MSB _u(29) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_PID_1_LSB _u(29) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_PID_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSE +// T +// Description : The number of bytes buffer 1 is offset from buffer 0 in +// Isochronous mode. Only valid in double buffered mode for an +// Isochronous endpoint. +// For a non Isochronous endpoint the offset is always 64 bytes. +// 0x0 -> 128 +// 0x1 -> 256 +// 0x2 -> 512 +// 0x3 -> 1024 +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_AVAILABLE_1 +// Description : Buffer 1 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_AVAILABLE_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_AVAILABLE_1_BITS _u(0x04000000) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_AVAILABLE_1_MSB _u(26) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_AVAILABLE_1_LSB _u(26) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_AVAILABLE_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LENGTH_1 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LENGTH_1_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LENGTH_1_BITS _u(0x03ff0000) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LENGTH_1_MSB _u(25) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LENGTH_1_LSB _u(16) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LENGTH_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_FULL_0 +// Description : Buffer 0 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_FULL_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_FULL_0_BITS _u(0x00008000) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_FULL_0_MSB _u(15) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_FULL_0_LSB _u(15) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_FULL_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LAST_0 +// Description : Buffer 0 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LAST_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LAST_0_BITS _u(0x00004000) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LAST_0_MSB _u(14) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LAST_0_LSB _u(14) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LAST_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_PID_0 +// Description : The data pid of buffer 0. +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_PID_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_PID_0_BITS _u(0x00002000) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_PID_0_MSB _u(13) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_PID_0_LSB _u(13) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_PID_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_RESET +// Description : Reset the buffer selector to buffer 0. +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_RESET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_RESET_BITS _u(0x00001000) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_RESET_MSB _u(12) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_RESET_LSB _u(12) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_RESET_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_STALL +// Description : Reply with a stall (valid for both buffers). +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_STALL_BITS _u(0x00000800) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_STALL_MSB _u(11) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_STALL_LSB _u(11) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_AVAILABLE_0 +// Description : Buffer 0 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_AVAILABLE_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_AVAILABLE_0_BITS _u(0x00000400) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_AVAILABLE_0_MSB _u(10) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_AVAILABLE_0_LSB _u(10) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LENGTH_0 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LENGTH_0_MSB _u(9) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LENGTH_0_LSB _u(0) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LENGTH_0_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL +// Description : Buffer control for both buffers of an endpoint. Fields ending +// in a _1 are for buffer 1. +// Fields ending in a _0 are for buffer 0. Buffer 1 controls are +// only valid if the endpoint is in double buffered mode. +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_OFFSET _u(0x00000090) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_BITS _u(0xffffffff) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_FULL_1 +// Description : Buffer 1 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_FULL_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_FULL_1_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_FULL_1_MSB _u(31) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_FULL_1_LSB _u(31) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_FULL_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LAST_1 +// Description : Buffer 1 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LAST_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LAST_1_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LAST_1_MSB _u(30) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LAST_1_LSB _u(30) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LAST_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_PID_1 +// Description : The data pid of buffer 1. +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_PID_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_PID_1_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_PID_1_MSB _u(29) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_PID_1_LSB _u(29) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_PID_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET +// Description : The number of bytes buffer 1 is offset from buffer 0 in +// Isochronous mode. Only valid in double buffered mode for an +// Isochronous endpoint. +// For a non Isochronous endpoint the offset is always 64 bytes. +// 0x0 -> 128 +// 0x1 -> 256 +// 0x2 -> 512 +// 0x3 -> 1024 +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_AVAILABLE_1 +// Description : Buffer 1 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_AVAILABLE_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_AVAILABLE_1_BITS _u(0x04000000) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_AVAILABLE_1_MSB _u(26) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_AVAILABLE_1_LSB _u(26) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_AVAILABLE_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LENGTH_1 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LENGTH_1_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LENGTH_1_BITS _u(0x03ff0000) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LENGTH_1_MSB _u(25) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LENGTH_1_LSB _u(16) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LENGTH_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_FULL_0 +// Description : Buffer 0 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_FULL_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_FULL_0_BITS _u(0x00008000) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_FULL_0_MSB _u(15) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_FULL_0_LSB _u(15) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_FULL_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LAST_0 +// Description : Buffer 0 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LAST_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LAST_0_BITS _u(0x00004000) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LAST_0_MSB _u(14) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LAST_0_LSB _u(14) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LAST_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_PID_0 +// Description : The data pid of buffer 0. +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_PID_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_PID_0_BITS _u(0x00002000) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_PID_0_MSB _u(13) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_PID_0_LSB _u(13) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_PID_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_RESET +// Description : Reset the buffer selector to buffer 0. +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_RESET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_RESET_BITS _u(0x00001000) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_RESET_MSB _u(12) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_RESET_LSB _u(12) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_RESET_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_STALL +// Description : Reply with a stall (valid for both buffers). +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_STALL_BITS _u(0x00000800) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_STALL_MSB _u(11) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_STALL_LSB _u(11) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_AVAILABLE_0 +// Description : Buffer 0 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_AVAILABLE_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_AVAILABLE_0_BITS _u(0x00000400) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_AVAILABLE_0_MSB _u(10) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_AVAILABLE_0_LSB _u(10) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LENGTH_0 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LENGTH_0_MSB _u(9) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LENGTH_0_LSB _u(0) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LENGTH_0_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL +// Description : Buffer control for both buffers of an endpoint. Fields ending +// in a _1 are for buffer 1. +// Fields ending in a _0 are for buffer 0. Buffer 1 controls are +// only valid if the endpoint is in double buffered mode. +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_OFFSET _u(0x00000094) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_BITS _u(0xffffffff) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_FULL_1 +// Description : Buffer 1 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_FULL_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_FULL_1_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_FULL_1_MSB _u(31) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_FULL_1_LSB _u(31) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_FULL_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_LAST_1 +// Description : Buffer 1 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_LAST_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_LAST_1_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_LAST_1_MSB _u(30) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_LAST_1_LSB _u(30) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_LAST_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_PID_1 +// Description : The data pid of buffer 1. +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_PID_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_PID_1_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_PID_1_MSB _u(29) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_PID_1_LSB _u(29) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_PID_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSE +// T +// Description : The number of bytes buffer 1 is offset from buffer 0 in +// Isochronous mode. Only valid in double buffered mode for an +// Isochronous endpoint. +// For a non Isochronous endpoint the offset is always 64 bytes. +// 0x0 -> 128 +// 0x1 -> 256 +// 0x2 -> 512 +// 0x3 -> 1024 +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_AVAILABLE_1 +// Description : Buffer 1 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_AVAILABLE_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_AVAILABLE_1_BITS _u(0x04000000) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_AVAILABLE_1_MSB _u(26) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_AVAILABLE_1_LSB _u(26) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_AVAILABLE_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_LENGTH_1 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_LENGTH_1_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_LENGTH_1_BITS _u(0x03ff0000) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_LENGTH_1_MSB _u(25) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_LENGTH_1_LSB _u(16) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_LENGTH_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_FULL_0 +// Description : Buffer 0 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_FULL_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_FULL_0_BITS _u(0x00008000) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_FULL_0_MSB _u(15) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_FULL_0_LSB _u(15) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_FULL_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_LAST_0 +// Description : Buffer 0 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_LAST_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_LAST_0_BITS _u(0x00004000) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_LAST_0_MSB _u(14) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_LAST_0_LSB _u(14) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_LAST_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_PID_0 +// Description : The data pid of buffer 0. +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_PID_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_PID_0_BITS _u(0x00002000) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_PID_0_MSB _u(13) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_PID_0_LSB _u(13) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_PID_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_RESET +// Description : Reset the buffer selector to buffer 0. +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_RESET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_RESET_BITS _u(0x00001000) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_RESET_MSB _u(12) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_RESET_LSB _u(12) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_RESET_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_STALL +// Description : Reply with a stall (valid for both buffers). +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_STALL_BITS _u(0x00000800) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_STALL_MSB _u(11) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_STALL_LSB _u(11) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_AVAILABLE_0 +// Description : Buffer 0 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_AVAILABLE_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_AVAILABLE_0_BITS _u(0x00000400) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_AVAILABLE_0_MSB _u(10) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_AVAILABLE_0_LSB _u(10) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_LENGTH_0 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_LENGTH_0_MSB _u(9) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_LENGTH_0_LSB _u(0) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_LENGTH_0_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL +// Description : Buffer control for both buffers of an endpoint. Fields ending +// in a _1 are for buffer 1. +// Fields ending in a _0 are for buffer 0. Buffer 1 controls are +// only valid if the endpoint is in double buffered mode. +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_OFFSET _u(0x00000098) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_BITS _u(0xffffffff) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_FULL_1 +// Description : Buffer 1 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_FULL_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_FULL_1_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_FULL_1_MSB _u(31) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_FULL_1_LSB _u(31) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_FULL_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_LAST_1 +// Description : Buffer 1 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_LAST_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_LAST_1_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_LAST_1_MSB _u(30) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_LAST_1_LSB _u(30) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_LAST_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_PID_1 +// Description : The data pid of buffer 1. +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_PID_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_PID_1_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_PID_1_MSB _u(29) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_PID_1_LSB _u(29) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_PID_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET +// Description : The number of bytes buffer 1 is offset from buffer 0 in +// Isochronous mode. Only valid in double buffered mode for an +// Isochronous endpoint. +// For a non Isochronous endpoint the offset is always 64 bytes. +// 0x0 -> 128 +// 0x1 -> 256 +// 0x2 -> 512 +// 0x3 -> 1024 +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_AVAILABLE_1 +// Description : Buffer 1 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_AVAILABLE_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_AVAILABLE_1_BITS _u(0x04000000) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_AVAILABLE_1_MSB _u(26) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_AVAILABLE_1_LSB _u(26) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_AVAILABLE_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_LENGTH_1 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_LENGTH_1_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_LENGTH_1_BITS _u(0x03ff0000) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_LENGTH_1_MSB _u(25) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_LENGTH_1_LSB _u(16) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_LENGTH_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_FULL_0 +// Description : Buffer 0 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_FULL_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_FULL_0_BITS _u(0x00008000) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_FULL_0_MSB _u(15) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_FULL_0_LSB _u(15) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_FULL_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_LAST_0 +// Description : Buffer 0 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_LAST_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_LAST_0_BITS _u(0x00004000) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_LAST_0_MSB _u(14) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_LAST_0_LSB _u(14) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_LAST_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_PID_0 +// Description : The data pid of buffer 0. +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_PID_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_PID_0_BITS _u(0x00002000) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_PID_0_MSB _u(13) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_PID_0_LSB _u(13) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_PID_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_RESET +// Description : Reset the buffer selector to buffer 0. +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_RESET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_RESET_BITS _u(0x00001000) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_RESET_MSB _u(12) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_RESET_LSB _u(12) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_RESET_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_STALL +// Description : Reply with a stall (valid for both buffers). +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_STALL_BITS _u(0x00000800) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_STALL_MSB _u(11) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_STALL_LSB _u(11) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_AVAILABLE_0 +// Description : Buffer 0 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_AVAILABLE_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_AVAILABLE_0_BITS _u(0x00000400) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_AVAILABLE_0_MSB _u(10) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_AVAILABLE_0_LSB _u(10) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_LENGTH_0 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_LENGTH_0_MSB _u(9) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_LENGTH_0_LSB _u(0) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_LENGTH_0_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL +// Description : Buffer control for both buffers of an endpoint. Fields ending +// in a _1 are for buffer 1. +// Fields ending in a _0 are for buffer 0. Buffer 1 controls are +// only valid if the endpoint is in double buffered mode. +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_OFFSET _u(0x0000009c) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_BITS _u(0xffffffff) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_FULL_1 +// Description : Buffer 1 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_FULL_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_FULL_1_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_FULL_1_MSB _u(31) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_FULL_1_LSB _u(31) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_FULL_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_LAST_1 +// Description : Buffer 1 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_LAST_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_LAST_1_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_LAST_1_MSB _u(30) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_LAST_1_LSB _u(30) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_LAST_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_PID_1 +// Description : The data pid of buffer 1. +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_PID_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_PID_1_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_PID_1_MSB _u(29) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_PID_1_LSB _u(29) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_PID_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSE +// T +// Description : The number of bytes buffer 1 is offset from buffer 0 in +// Isochronous mode. Only valid in double buffered mode for an +// Isochronous endpoint. +// For a non Isochronous endpoint the offset is always 64 bytes. +// 0x0 -> 128 +// 0x1 -> 256 +// 0x2 -> 512 +// 0x3 -> 1024 +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_AVAILABLE_1 +// Description : Buffer 1 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_AVAILABLE_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_AVAILABLE_1_BITS _u(0x04000000) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_AVAILABLE_1_MSB _u(26) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_AVAILABLE_1_LSB _u(26) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_AVAILABLE_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_LENGTH_1 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_LENGTH_1_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_LENGTH_1_BITS _u(0x03ff0000) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_LENGTH_1_MSB _u(25) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_LENGTH_1_LSB _u(16) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_LENGTH_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_FULL_0 +// Description : Buffer 0 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_FULL_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_FULL_0_BITS _u(0x00008000) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_FULL_0_MSB _u(15) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_FULL_0_LSB _u(15) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_FULL_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_LAST_0 +// Description : Buffer 0 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_LAST_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_LAST_0_BITS _u(0x00004000) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_LAST_0_MSB _u(14) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_LAST_0_LSB _u(14) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_LAST_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_PID_0 +// Description : The data pid of buffer 0. +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_PID_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_PID_0_BITS _u(0x00002000) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_PID_0_MSB _u(13) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_PID_0_LSB _u(13) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_PID_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_RESET +// Description : Reset the buffer selector to buffer 0. +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_RESET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_RESET_BITS _u(0x00001000) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_RESET_MSB _u(12) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_RESET_LSB _u(12) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_RESET_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_STALL +// Description : Reply with a stall (valid for both buffers). +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_STALL_BITS _u(0x00000800) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_STALL_MSB _u(11) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_STALL_LSB _u(11) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_AVAILABLE_0 +// Description : Buffer 0 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_AVAILABLE_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_AVAILABLE_0_BITS _u(0x00000400) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_AVAILABLE_0_MSB _u(10) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_AVAILABLE_0_LSB _u(10) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_LENGTH_0 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_LENGTH_0_MSB _u(9) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_LENGTH_0_LSB _u(0) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_LENGTH_0_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL +// Description : Buffer control for both buffers of an endpoint. Fields ending +// in a _1 are for buffer 1. +// Fields ending in a _0 are for buffer 0. Buffer 1 controls are +// only valid if the endpoint is in double buffered mode. +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_OFFSET _u(0x000000a0) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_BITS _u(0xffffffff) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_FULL_1 +// Description : Buffer 1 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_FULL_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_FULL_1_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_FULL_1_MSB _u(31) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_FULL_1_LSB _u(31) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_FULL_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_LAST_1 +// Description : Buffer 1 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_LAST_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_LAST_1_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_LAST_1_MSB _u(30) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_LAST_1_LSB _u(30) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_LAST_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_PID_1 +// Description : The data pid of buffer 1. +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_PID_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_PID_1_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_PID_1_MSB _u(29) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_PID_1_LSB _u(29) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_PID_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET +// Description : The number of bytes buffer 1 is offset from buffer 0 in +// Isochronous mode. Only valid in double buffered mode for an +// Isochronous endpoint. +// For a non Isochronous endpoint the offset is always 64 bytes. +// 0x0 -> 128 +// 0x1 -> 256 +// 0x2 -> 512 +// 0x3 -> 1024 +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_AVAILABLE_1 +// Description : Buffer 1 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_AVAILABLE_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_AVAILABLE_1_BITS _u(0x04000000) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_AVAILABLE_1_MSB _u(26) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_AVAILABLE_1_LSB _u(26) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_AVAILABLE_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_LENGTH_1 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_LENGTH_1_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_LENGTH_1_BITS _u(0x03ff0000) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_LENGTH_1_MSB _u(25) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_LENGTH_1_LSB _u(16) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_LENGTH_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_FULL_0 +// Description : Buffer 0 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_FULL_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_FULL_0_BITS _u(0x00008000) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_FULL_0_MSB _u(15) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_FULL_0_LSB _u(15) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_FULL_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_LAST_0 +// Description : Buffer 0 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_LAST_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_LAST_0_BITS _u(0x00004000) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_LAST_0_MSB _u(14) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_LAST_0_LSB _u(14) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_LAST_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_PID_0 +// Description : The data pid of buffer 0. +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_PID_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_PID_0_BITS _u(0x00002000) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_PID_0_MSB _u(13) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_PID_0_LSB _u(13) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_PID_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_RESET +// Description : Reset the buffer selector to buffer 0. +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_RESET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_RESET_BITS _u(0x00001000) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_RESET_MSB _u(12) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_RESET_LSB _u(12) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_RESET_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_STALL +// Description : Reply with a stall (valid for both buffers). +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_STALL_BITS _u(0x00000800) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_STALL_MSB _u(11) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_STALL_LSB _u(11) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_AVAILABLE_0 +// Description : Buffer 0 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_AVAILABLE_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_AVAILABLE_0_BITS _u(0x00000400) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_AVAILABLE_0_MSB _u(10) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_AVAILABLE_0_LSB _u(10) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_LENGTH_0 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_LENGTH_0_MSB _u(9) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_LENGTH_0_LSB _u(0) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_LENGTH_0_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL +// Description : Buffer control for both buffers of an endpoint. Fields ending +// in a _1 are for buffer 1. +// Fields ending in a _0 are for buffer 0. Buffer 1 controls are +// only valid if the endpoint is in double buffered mode. +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_OFFSET _u(0x000000a4) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_BITS _u(0xffffffff) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_FULL_1 +// Description : Buffer 1 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_FULL_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_FULL_1_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_FULL_1_MSB _u(31) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_FULL_1_LSB _u(31) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_FULL_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_LAST_1 +// Description : Buffer 1 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_LAST_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_LAST_1_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_LAST_1_MSB _u(30) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_LAST_1_LSB _u(30) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_LAST_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_PID_1 +// Description : The data pid of buffer 1. +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_PID_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_PID_1_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_PID_1_MSB _u(29) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_PID_1_LSB _u(29) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_PID_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSE +// T +// Description : The number of bytes buffer 1 is offset from buffer 0 in +// Isochronous mode. Only valid in double buffered mode for an +// Isochronous endpoint. +// For a non Isochronous endpoint the offset is always 64 bytes. +// 0x0 -> 128 +// 0x1 -> 256 +// 0x2 -> 512 +// 0x3 -> 1024 +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_AVAILABLE_1 +// Description : Buffer 1 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_AVAILABLE_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_AVAILABLE_1_BITS _u(0x04000000) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_AVAILABLE_1_MSB _u(26) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_AVAILABLE_1_LSB _u(26) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_AVAILABLE_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_LENGTH_1 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_LENGTH_1_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_LENGTH_1_BITS _u(0x03ff0000) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_LENGTH_1_MSB _u(25) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_LENGTH_1_LSB _u(16) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_LENGTH_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_FULL_0 +// Description : Buffer 0 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_FULL_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_FULL_0_BITS _u(0x00008000) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_FULL_0_MSB _u(15) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_FULL_0_LSB _u(15) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_FULL_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_LAST_0 +// Description : Buffer 0 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_LAST_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_LAST_0_BITS _u(0x00004000) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_LAST_0_MSB _u(14) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_LAST_0_LSB _u(14) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_LAST_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_PID_0 +// Description : The data pid of buffer 0. +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_PID_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_PID_0_BITS _u(0x00002000) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_PID_0_MSB _u(13) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_PID_0_LSB _u(13) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_PID_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_RESET +// Description : Reset the buffer selector to buffer 0. +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_RESET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_RESET_BITS _u(0x00001000) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_RESET_MSB _u(12) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_RESET_LSB _u(12) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_RESET_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_STALL +// Description : Reply with a stall (valid for both buffers). +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_STALL_BITS _u(0x00000800) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_STALL_MSB _u(11) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_STALL_LSB _u(11) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_AVAILABLE_0 +// Description : Buffer 0 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_AVAILABLE_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_AVAILABLE_0_BITS _u(0x00000400) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_AVAILABLE_0_MSB _u(10) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_AVAILABLE_0_LSB _u(10) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_LENGTH_0 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_LENGTH_0_MSB _u(9) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_LENGTH_0_LSB _u(0) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_LENGTH_0_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL +// Description : Buffer control for both buffers of an endpoint. Fields ending +// in a _1 are for buffer 1. +// Fields ending in a _0 are for buffer 0. Buffer 1 controls are +// only valid if the endpoint is in double buffered mode. +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_OFFSET _u(0x000000a8) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_BITS _u(0xffffffff) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_FULL_1 +// Description : Buffer 1 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_FULL_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_FULL_1_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_FULL_1_MSB _u(31) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_FULL_1_LSB _u(31) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_FULL_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_LAST_1 +// Description : Buffer 1 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_LAST_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_LAST_1_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_LAST_1_MSB _u(30) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_LAST_1_LSB _u(30) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_LAST_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_PID_1 +// Description : The data pid of buffer 1. +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_PID_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_PID_1_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_PID_1_MSB _u(29) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_PID_1_LSB _u(29) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_PID_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET +// Description : The number of bytes buffer 1 is offset from buffer 0 in +// Isochronous mode. Only valid in double buffered mode for an +// Isochronous endpoint. +// For a non Isochronous endpoint the offset is always 64 bytes. +// 0x0 -> 128 +// 0x1 -> 256 +// 0x2 -> 512 +// 0x3 -> 1024 +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_AVAILABLE_1 +// Description : Buffer 1 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_AVAILABLE_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_AVAILABLE_1_BITS _u(0x04000000) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_AVAILABLE_1_MSB _u(26) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_AVAILABLE_1_LSB _u(26) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_AVAILABLE_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_LENGTH_1 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_LENGTH_1_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_LENGTH_1_BITS _u(0x03ff0000) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_LENGTH_1_MSB _u(25) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_LENGTH_1_LSB _u(16) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_LENGTH_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_FULL_0 +// Description : Buffer 0 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_FULL_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_FULL_0_BITS _u(0x00008000) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_FULL_0_MSB _u(15) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_FULL_0_LSB _u(15) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_FULL_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_LAST_0 +// Description : Buffer 0 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_LAST_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_LAST_0_BITS _u(0x00004000) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_LAST_0_MSB _u(14) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_LAST_0_LSB _u(14) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_LAST_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_PID_0 +// Description : The data pid of buffer 0. +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_PID_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_PID_0_BITS _u(0x00002000) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_PID_0_MSB _u(13) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_PID_0_LSB _u(13) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_PID_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_RESET +// Description : Reset the buffer selector to buffer 0. +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_RESET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_RESET_BITS _u(0x00001000) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_RESET_MSB _u(12) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_RESET_LSB _u(12) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_RESET_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_STALL +// Description : Reply with a stall (valid for both buffers). +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_STALL_BITS _u(0x00000800) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_STALL_MSB _u(11) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_STALL_LSB _u(11) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_AVAILABLE_0 +// Description : Buffer 0 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_AVAILABLE_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_AVAILABLE_0_BITS _u(0x00000400) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_AVAILABLE_0_MSB _u(10) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_AVAILABLE_0_LSB _u(10) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_LENGTH_0 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_LENGTH_0_MSB _u(9) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_LENGTH_0_LSB _u(0) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_LENGTH_0_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL +// Description : Buffer control for both buffers of an endpoint. Fields ending +// in a _1 are for buffer 1. +// Fields ending in a _0 are for buffer 0. Buffer 1 controls are +// only valid if the endpoint is in double buffered mode. +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_OFFSET _u(0x000000ac) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_BITS _u(0xffffffff) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_FULL_1 +// Description : Buffer 1 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_FULL_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_FULL_1_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_FULL_1_MSB _u(31) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_FULL_1_LSB _u(31) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_FULL_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_LAST_1 +// Description : Buffer 1 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_LAST_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_LAST_1_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_LAST_1_MSB _u(30) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_LAST_1_LSB _u(30) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_LAST_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_PID_1 +// Description : The data pid of buffer 1. +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_PID_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_PID_1_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_PID_1_MSB _u(29) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_PID_1_LSB _u(29) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_PID_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSE +// T +// Description : The number of bytes buffer 1 is offset from buffer 0 in +// Isochronous mode. Only valid in double buffered mode for an +// Isochronous endpoint. +// For a non Isochronous endpoint the offset is always 64 bytes. +// 0x0 -> 128 +// 0x1 -> 256 +// 0x2 -> 512 +// 0x3 -> 1024 +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_AVAILABLE_1 +// Description : Buffer 1 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_AVAILABLE_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_AVAILABLE_1_BITS _u(0x04000000) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_AVAILABLE_1_MSB _u(26) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_AVAILABLE_1_LSB _u(26) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_AVAILABLE_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_LENGTH_1 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_LENGTH_1_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_LENGTH_1_BITS _u(0x03ff0000) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_LENGTH_1_MSB _u(25) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_LENGTH_1_LSB _u(16) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_LENGTH_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_FULL_0 +// Description : Buffer 0 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_FULL_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_FULL_0_BITS _u(0x00008000) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_FULL_0_MSB _u(15) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_FULL_0_LSB _u(15) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_FULL_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_LAST_0 +// Description : Buffer 0 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_LAST_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_LAST_0_BITS _u(0x00004000) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_LAST_0_MSB _u(14) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_LAST_0_LSB _u(14) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_LAST_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_PID_0 +// Description : The data pid of buffer 0. +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_PID_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_PID_0_BITS _u(0x00002000) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_PID_0_MSB _u(13) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_PID_0_LSB _u(13) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_PID_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_RESET +// Description : Reset the buffer selector to buffer 0. +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_RESET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_RESET_BITS _u(0x00001000) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_RESET_MSB _u(12) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_RESET_LSB _u(12) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_RESET_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_STALL +// Description : Reply with a stall (valid for both buffers). +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_STALL_BITS _u(0x00000800) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_STALL_MSB _u(11) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_STALL_LSB _u(11) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_AVAILABLE_0 +// Description : Buffer 0 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_AVAILABLE_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_AVAILABLE_0_BITS _u(0x00000400) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_AVAILABLE_0_MSB _u(10) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_AVAILABLE_0_LSB _u(10) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_LENGTH_0 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_LENGTH_0_MSB _u(9) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_LENGTH_0_LSB _u(0) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_LENGTH_0_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL +// Description : Buffer control for both buffers of an endpoint. Fields ending +// in a _1 are for buffer 1. +// Fields ending in a _0 are for buffer 0. Buffer 1 controls are +// only valid if the endpoint is in double buffered mode. +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_OFFSET _u(0x000000b0) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_BITS _u(0xffffffff) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_FULL_1 +// Description : Buffer 1 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_FULL_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_FULL_1_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_FULL_1_MSB _u(31) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_FULL_1_LSB _u(31) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_FULL_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_LAST_1 +// Description : Buffer 1 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_LAST_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_LAST_1_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_LAST_1_MSB _u(30) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_LAST_1_LSB _u(30) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_LAST_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_PID_1 +// Description : The data pid of buffer 1. +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_PID_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_PID_1_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_PID_1_MSB _u(29) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_PID_1_LSB _u(29) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_PID_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET +// Description : The number of bytes buffer 1 is offset from buffer 0 in +// Isochronous mode. Only valid in double buffered mode for an +// Isochronous endpoint. +// For a non Isochronous endpoint the offset is always 64 bytes. +// 0x0 -> 128 +// 0x1 -> 256 +// 0x2 -> 512 +// 0x3 -> 1024 +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_AVAILABLE_1 +// Description : Buffer 1 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_AVAILABLE_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_AVAILABLE_1_BITS _u(0x04000000) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_AVAILABLE_1_MSB _u(26) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_AVAILABLE_1_LSB _u(26) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_AVAILABLE_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_LENGTH_1 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_LENGTH_1_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_LENGTH_1_BITS _u(0x03ff0000) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_LENGTH_1_MSB _u(25) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_LENGTH_1_LSB _u(16) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_LENGTH_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_FULL_0 +// Description : Buffer 0 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_FULL_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_FULL_0_BITS _u(0x00008000) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_FULL_0_MSB _u(15) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_FULL_0_LSB _u(15) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_FULL_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_LAST_0 +// Description : Buffer 0 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_LAST_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_LAST_0_BITS _u(0x00004000) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_LAST_0_MSB _u(14) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_LAST_0_LSB _u(14) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_LAST_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_PID_0 +// Description : The data pid of buffer 0. +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_PID_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_PID_0_BITS _u(0x00002000) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_PID_0_MSB _u(13) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_PID_0_LSB _u(13) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_PID_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_RESET +// Description : Reset the buffer selector to buffer 0. +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_RESET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_RESET_BITS _u(0x00001000) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_RESET_MSB _u(12) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_RESET_LSB _u(12) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_RESET_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_STALL +// Description : Reply with a stall (valid for both buffers). +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_STALL_BITS _u(0x00000800) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_STALL_MSB _u(11) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_STALL_LSB _u(11) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_AVAILABLE_0 +// Description : Buffer 0 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_AVAILABLE_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_AVAILABLE_0_BITS _u(0x00000400) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_AVAILABLE_0_MSB _u(10) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_AVAILABLE_0_LSB _u(10) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_LENGTH_0 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_LENGTH_0_MSB _u(9) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_LENGTH_0_LSB _u(0) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_LENGTH_0_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL +// Description : Buffer control for both buffers of an endpoint. Fields ending +// in a _1 are for buffer 1. +// Fields ending in a _0 are for buffer 0. Buffer 1 controls are +// only valid if the endpoint is in double buffered mode. +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_OFFSET _u(0x000000b4) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_BITS _u(0xffffffff) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_FULL_1 +// Description : Buffer 1 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_FULL_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_FULL_1_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_FULL_1_MSB _u(31) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_FULL_1_LSB _u(31) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_FULL_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_LAST_1 +// Description : Buffer 1 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_LAST_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_LAST_1_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_LAST_1_MSB _u(30) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_LAST_1_LSB _u(30) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_LAST_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_PID_1 +// Description : The data pid of buffer 1. +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_PID_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_PID_1_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_PID_1_MSB _u(29) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_PID_1_LSB _u(29) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_PID_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSE +// T +// Description : The number of bytes buffer 1 is offset from buffer 0 in +// Isochronous mode. Only valid in double buffered mode for an +// Isochronous endpoint. +// For a non Isochronous endpoint the offset is always 64 bytes. +// 0x0 -> 128 +// 0x1 -> 256 +// 0x2 -> 512 +// 0x3 -> 1024 +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_AVAILABLE_1 +// Description : Buffer 1 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_AVAILABLE_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_AVAILABLE_1_BITS _u(0x04000000) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_AVAILABLE_1_MSB _u(26) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_AVAILABLE_1_LSB _u(26) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_AVAILABLE_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_LENGTH_1 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_LENGTH_1_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_LENGTH_1_BITS _u(0x03ff0000) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_LENGTH_1_MSB _u(25) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_LENGTH_1_LSB _u(16) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_LENGTH_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_FULL_0 +// Description : Buffer 0 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_FULL_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_FULL_0_BITS _u(0x00008000) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_FULL_0_MSB _u(15) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_FULL_0_LSB _u(15) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_FULL_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_LAST_0 +// Description : Buffer 0 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_LAST_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_LAST_0_BITS _u(0x00004000) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_LAST_0_MSB _u(14) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_LAST_0_LSB _u(14) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_LAST_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_PID_0 +// Description : The data pid of buffer 0. +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_PID_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_PID_0_BITS _u(0x00002000) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_PID_0_MSB _u(13) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_PID_0_LSB _u(13) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_PID_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_RESET +// Description : Reset the buffer selector to buffer 0. +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_RESET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_RESET_BITS _u(0x00001000) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_RESET_MSB _u(12) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_RESET_LSB _u(12) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_RESET_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_STALL +// Description : Reply with a stall (valid for both buffers). +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_STALL_BITS _u(0x00000800) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_STALL_MSB _u(11) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_STALL_LSB _u(11) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_AVAILABLE_0 +// Description : Buffer 0 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_AVAILABLE_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_AVAILABLE_0_BITS _u(0x00000400) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_AVAILABLE_0_MSB _u(10) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_AVAILABLE_0_LSB _u(10) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_LENGTH_0 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_LENGTH_0_MSB _u(9) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_LENGTH_0_LSB _u(0) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_LENGTH_0_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL +// Description : Buffer control for both buffers of an endpoint. Fields ending +// in a _1 are for buffer 1. +// Fields ending in a _0 are for buffer 0. Buffer 1 controls are +// only valid if the endpoint is in double buffered mode. +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_OFFSET _u(0x000000b8) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_BITS _u(0xffffffff) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_FULL_1 +// Description : Buffer 1 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_FULL_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_FULL_1_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_FULL_1_MSB _u(31) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_FULL_1_LSB _u(31) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_FULL_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_LAST_1 +// Description : Buffer 1 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_LAST_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_LAST_1_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_LAST_1_MSB _u(30) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_LAST_1_LSB _u(30) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_LAST_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_PID_1 +// Description : The data pid of buffer 1. +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_PID_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_PID_1_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_PID_1_MSB _u(29) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_PID_1_LSB _u(29) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_PID_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET +// Description : The number of bytes buffer 1 is offset from buffer 0 in +// Isochronous mode. Only valid in double buffered mode for an +// Isochronous endpoint. +// For a non Isochronous endpoint the offset is always 64 bytes. +// 0x0 -> 128 +// 0x1 -> 256 +// 0x2 -> 512 +// 0x3 -> 1024 +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_AVAILABLE_1 +// Description : Buffer 1 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_AVAILABLE_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_AVAILABLE_1_BITS _u(0x04000000) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_AVAILABLE_1_MSB _u(26) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_AVAILABLE_1_LSB _u(26) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_AVAILABLE_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_LENGTH_1 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_LENGTH_1_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_LENGTH_1_BITS _u(0x03ff0000) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_LENGTH_1_MSB _u(25) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_LENGTH_1_LSB _u(16) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_LENGTH_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_FULL_0 +// Description : Buffer 0 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_FULL_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_FULL_0_BITS _u(0x00008000) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_FULL_0_MSB _u(15) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_FULL_0_LSB _u(15) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_FULL_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_LAST_0 +// Description : Buffer 0 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_LAST_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_LAST_0_BITS _u(0x00004000) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_LAST_0_MSB _u(14) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_LAST_0_LSB _u(14) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_LAST_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_PID_0 +// Description : The data pid of buffer 0. +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_PID_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_PID_0_BITS _u(0x00002000) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_PID_0_MSB _u(13) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_PID_0_LSB _u(13) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_PID_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_RESET +// Description : Reset the buffer selector to buffer 0. +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_RESET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_RESET_BITS _u(0x00001000) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_RESET_MSB _u(12) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_RESET_LSB _u(12) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_RESET_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_STALL +// Description : Reply with a stall (valid for both buffers). +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_STALL_BITS _u(0x00000800) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_STALL_MSB _u(11) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_STALL_LSB _u(11) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_AVAILABLE_0 +// Description : Buffer 0 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_AVAILABLE_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_AVAILABLE_0_BITS _u(0x00000400) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_AVAILABLE_0_MSB _u(10) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_AVAILABLE_0_LSB _u(10) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_LENGTH_0 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_LENGTH_0_MSB _u(9) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_LENGTH_0_LSB _u(0) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_LENGTH_0_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL +// Description : Buffer control for both buffers of an endpoint. Fields ending +// in a _1 are for buffer 1. +// Fields ending in a _0 are for buffer 0. Buffer 1 controls are +// only valid if the endpoint is in double buffered mode. +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_OFFSET _u(0x000000bc) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_BITS _u(0xffffffff) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_FULL_1 +// Description : Buffer 1 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_FULL_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_FULL_1_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_FULL_1_MSB _u(31) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_FULL_1_LSB _u(31) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_FULL_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_LAST_1 +// Description : Buffer 1 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_LAST_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_LAST_1_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_LAST_1_MSB _u(30) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_LAST_1_LSB _u(30) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_LAST_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_PID_1 +// Description : The data pid of buffer 1. +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_PID_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_PID_1_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_PID_1_MSB _u(29) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_PID_1_LSB _u(29) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_PID_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSE +// T +// Description : The number of bytes buffer 1 is offset from buffer 0 in +// Isochronous mode. Only valid in double buffered mode for an +// Isochronous endpoint. +// For a non Isochronous endpoint the offset is always 64 bytes. +// 0x0 -> 128 +// 0x1 -> 256 +// 0x2 -> 512 +// 0x3 -> 1024 +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_AVAILABLE_1 +// Description : Buffer 1 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_AVAILABLE_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_AVAILABLE_1_BITS _u(0x04000000) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_AVAILABLE_1_MSB _u(26) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_AVAILABLE_1_LSB _u(26) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_AVAILABLE_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_LENGTH_1 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_LENGTH_1_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_LENGTH_1_BITS _u(0x03ff0000) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_LENGTH_1_MSB _u(25) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_LENGTH_1_LSB _u(16) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_LENGTH_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_FULL_0 +// Description : Buffer 0 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_FULL_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_FULL_0_BITS _u(0x00008000) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_FULL_0_MSB _u(15) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_FULL_0_LSB _u(15) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_FULL_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_LAST_0 +// Description : Buffer 0 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_LAST_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_LAST_0_BITS _u(0x00004000) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_LAST_0_MSB _u(14) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_LAST_0_LSB _u(14) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_LAST_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_PID_0 +// Description : The data pid of buffer 0. +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_PID_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_PID_0_BITS _u(0x00002000) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_PID_0_MSB _u(13) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_PID_0_LSB _u(13) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_PID_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_RESET +// Description : Reset the buffer selector to buffer 0. +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_RESET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_RESET_BITS _u(0x00001000) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_RESET_MSB _u(12) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_RESET_LSB _u(12) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_RESET_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_STALL +// Description : Reply with a stall (valid for both buffers). +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_STALL_BITS _u(0x00000800) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_STALL_MSB _u(11) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_STALL_LSB _u(11) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_AVAILABLE_0 +// Description : Buffer 0 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_AVAILABLE_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_AVAILABLE_0_BITS _u(0x00000400) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_AVAILABLE_0_MSB _u(10) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_AVAILABLE_0_LSB _u(10) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_LENGTH_0 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_LENGTH_0_MSB _u(9) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_LENGTH_0_LSB _u(0) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_LENGTH_0_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL +// Description : Buffer control for both buffers of an endpoint. Fields ending +// in a _1 are for buffer 1. +// Fields ending in a _0 are for buffer 0. Buffer 1 controls are +// only valid if the endpoint is in double buffered mode. +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_OFFSET _u(0x000000c0) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_BITS _u(0xffffffff) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_FULL_1 +// Description : Buffer 1 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_FULL_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_FULL_1_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_FULL_1_MSB _u(31) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_FULL_1_LSB _u(31) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_FULL_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_LAST_1 +// Description : Buffer 1 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_LAST_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_LAST_1_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_LAST_1_MSB _u(30) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_LAST_1_LSB _u(30) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_LAST_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_PID_1 +// Description : The data pid of buffer 1. +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_PID_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_PID_1_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_PID_1_MSB _u(29) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_PID_1_LSB _u(29) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_PID_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET +// Description : The number of bytes buffer 1 is offset from buffer 0 in +// Isochronous mode. Only valid in double buffered mode for an +// Isochronous endpoint. +// For a non Isochronous endpoint the offset is always 64 bytes. +// 0x0 -> 128 +// 0x1 -> 256 +// 0x2 -> 512 +// 0x3 -> 1024 +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_AVAILABLE_1 +// Description : Buffer 1 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_AVAILABLE_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_AVAILABLE_1_BITS _u(0x04000000) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_AVAILABLE_1_MSB _u(26) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_AVAILABLE_1_LSB _u(26) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_AVAILABLE_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_LENGTH_1 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_LENGTH_1_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_LENGTH_1_BITS _u(0x03ff0000) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_LENGTH_1_MSB _u(25) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_LENGTH_1_LSB _u(16) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_LENGTH_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_FULL_0 +// Description : Buffer 0 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_FULL_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_FULL_0_BITS _u(0x00008000) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_FULL_0_MSB _u(15) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_FULL_0_LSB _u(15) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_FULL_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_LAST_0 +// Description : Buffer 0 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_LAST_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_LAST_0_BITS _u(0x00004000) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_LAST_0_MSB _u(14) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_LAST_0_LSB _u(14) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_LAST_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_PID_0 +// Description : The data pid of buffer 0. +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_PID_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_PID_0_BITS _u(0x00002000) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_PID_0_MSB _u(13) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_PID_0_LSB _u(13) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_PID_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_RESET +// Description : Reset the buffer selector to buffer 0. +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_RESET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_RESET_BITS _u(0x00001000) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_RESET_MSB _u(12) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_RESET_LSB _u(12) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_RESET_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_STALL +// Description : Reply with a stall (valid for both buffers). +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_STALL_BITS _u(0x00000800) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_STALL_MSB _u(11) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_STALL_LSB _u(11) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_AVAILABLE_0 +// Description : Buffer 0 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_AVAILABLE_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_AVAILABLE_0_BITS _u(0x00000400) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_AVAILABLE_0_MSB _u(10) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_AVAILABLE_0_LSB _u(10) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_LENGTH_0 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_LENGTH_0_MSB _u(9) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_LENGTH_0_LSB _u(0) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_LENGTH_0_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL +// Description : Buffer control for both buffers of an endpoint. Fields ending +// in a _1 are for buffer 1. +// Fields ending in a _0 are for buffer 0. Buffer 1 controls are +// only valid if the endpoint is in double buffered mode. +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_OFFSET _u(0x000000c4) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_BITS _u(0xffffffff) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_FULL_1 +// Description : Buffer 1 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_FULL_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_FULL_1_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_FULL_1_MSB _u(31) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_FULL_1_LSB _u(31) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_FULL_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_LAST_1 +// Description : Buffer 1 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_LAST_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_LAST_1_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_LAST_1_MSB _u(30) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_LAST_1_LSB _u(30) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_LAST_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_PID_1 +// Description : The data pid of buffer 1. +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_PID_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_PID_1_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_PID_1_MSB _u(29) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_PID_1_LSB _u(29) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_PID_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSE +// T +// Description : The number of bytes buffer 1 is offset from buffer 0 in +// Isochronous mode. Only valid in double buffered mode for an +// Isochronous endpoint. +// For a non Isochronous endpoint the offset is always 64 bytes. +// 0x0 -> 128 +// 0x1 -> 256 +// 0x2 -> 512 +// 0x3 -> 1024 +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_AVAILABLE_1 +// Description : Buffer 1 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_AVAILABLE_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_AVAILABLE_1_BITS _u(0x04000000) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_AVAILABLE_1_MSB _u(26) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_AVAILABLE_1_LSB _u(26) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_AVAILABLE_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_LENGTH_1 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_LENGTH_1_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_LENGTH_1_BITS _u(0x03ff0000) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_LENGTH_1_MSB _u(25) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_LENGTH_1_LSB _u(16) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_LENGTH_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_FULL_0 +// Description : Buffer 0 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_FULL_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_FULL_0_BITS _u(0x00008000) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_FULL_0_MSB _u(15) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_FULL_0_LSB _u(15) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_FULL_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_LAST_0 +// Description : Buffer 0 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_LAST_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_LAST_0_BITS _u(0x00004000) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_LAST_0_MSB _u(14) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_LAST_0_LSB _u(14) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_LAST_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_PID_0 +// Description : The data pid of buffer 0. +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_PID_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_PID_0_BITS _u(0x00002000) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_PID_0_MSB _u(13) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_PID_0_LSB _u(13) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_PID_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_RESET +// Description : Reset the buffer selector to buffer 0. +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_RESET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_RESET_BITS _u(0x00001000) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_RESET_MSB _u(12) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_RESET_LSB _u(12) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_RESET_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_STALL +// Description : Reply with a stall (valid for both buffers). +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_STALL_BITS _u(0x00000800) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_STALL_MSB _u(11) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_STALL_LSB _u(11) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_AVAILABLE_0 +// Description : Buffer 0 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_AVAILABLE_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_AVAILABLE_0_BITS _u(0x00000400) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_AVAILABLE_0_MSB _u(10) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_AVAILABLE_0_LSB _u(10) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_LENGTH_0 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_LENGTH_0_MSB _u(9) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_LENGTH_0_LSB _u(0) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_LENGTH_0_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL +// Description : Buffer control for both buffers of an endpoint. Fields ending +// in a _1 are for buffer 1. +// Fields ending in a _0 are for buffer 0. Buffer 1 controls are +// only valid if the endpoint is in double buffered mode. +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_OFFSET _u(0x000000c8) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_BITS _u(0xffffffff) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_FULL_1 +// Description : Buffer 1 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_FULL_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_FULL_1_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_FULL_1_MSB _u(31) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_FULL_1_LSB _u(31) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_FULL_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_LAST_1 +// Description : Buffer 1 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_LAST_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_LAST_1_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_LAST_1_MSB _u(30) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_LAST_1_LSB _u(30) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_LAST_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_PID_1 +// Description : The data pid of buffer 1. +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_PID_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_PID_1_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_PID_1_MSB _u(29) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_PID_1_LSB _u(29) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_PID_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET +// Description : The number of bytes buffer 1 is offset from buffer 0 in +// Isochronous mode. Only valid in double buffered mode for an +// Isochronous endpoint. +// For a non Isochronous endpoint the offset is always 64 bytes. +// 0x0 -> 128 +// 0x1 -> 256 +// 0x2 -> 512 +// 0x3 -> 1024 +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_AVAILABLE_1 +// Description : Buffer 1 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_AVAILABLE_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_AVAILABLE_1_BITS _u(0x04000000) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_AVAILABLE_1_MSB _u(26) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_AVAILABLE_1_LSB _u(26) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_AVAILABLE_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_LENGTH_1 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_LENGTH_1_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_LENGTH_1_BITS _u(0x03ff0000) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_LENGTH_1_MSB _u(25) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_LENGTH_1_LSB _u(16) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_LENGTH_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_FULL_0 +// Description : Buffer 0 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_FULL_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_FULL_0_BITS _u(0x00008000) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_FULL_0_MSB _u(15) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_FULL_0_LSB _u(15) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_FULL_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_LAST_0 +// Description : Buffer 0 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_LAST_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_LAST_0_BITS _u(0x00004000) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_LAST_0_MSB _u(14) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_LAST_0_LSB _u(14) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_LAST_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_PID_0 +// Description : The data pid of buffer 0. +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_PID_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_PID_0_BITS _u(0x00002000) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_PID_0_MSB _u(13) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_PID_0_LSB _u(13) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_PID_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_RESET +// Description : Reset the buffer selector to buffer 0. +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_RESET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_RESET_BITS _u(0x00001000) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_RESET_MSB _u(12) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_RESET_LSB _u(12) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_RESET_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_STALL +// Description : Reply with a stall (valid for both buffers). +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_STALL_BITS _u(0x00000800) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_STALL_MSB _u(11) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_STALL_LSB _u(11) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_AVAILABLE_0 +// Description : Buffer 0 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_AVAILABLE_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_AVAILABLE_0_BITS _u(0x00000400) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_AVAILABLE_0_MSB _u(10) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_AVAILABLE_0_LSB _u(10) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_LENGTH_0 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_LENGTH_0_MSB _u(9) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_LENGTH_0_LSB _u(0) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_LENGTH_0_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL +// Description : Buffer control for both buffers of an endpoint. Fields ending +// in a _1 are for buffer 1. +// Fields ending in a _0 are for buffer 0. Buffer 1 controls are +// only valid if the endpoint is in double buffered mode. +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_OFFSET _u(0x000000cc) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_BITS _u(0xffffffff) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_FULL_1 +// Description : Buffer 1 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_FULL_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_FULL_1_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_FULL_1_MSB _u(31) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_FULL_1_LSB _u(31) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_FULL_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_LAST_1 +// Description : Buffer 1 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_LAST_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_LAST_1_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_LAST_1_MSB _u(30) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_LAST_1_LSB _u(30) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_LAST_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_PID_1 +// Description : The data pid of buffer 1. +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_PID_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_PID_1_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_PID_1_MSB _u(29) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_PID_1_LSB _u(29) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_PID_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSE +// T +// Description : The number of bytes buffer 1 is offset from buffer 0 in +// Isochronous mode. Only valid in double buffered mode for an +// Isochronous endpoint. +// For a non Isochronous endpoint the offset is always 64 bytes. +// 0x0 -> 128 +// 0x1 -> 256 +// 0x2 -> 512 +// 0x3 -> 1024 +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_AVAILABLE_1 +// Description : Buffer 1 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_AVAILABLE_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_AVAILABLE_1_BITS _u(0x04000000) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_AVAILABLE_1_MSB _u(26) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_AVAILABLE_1_LSB _u(26) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_AVAILABLE_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_LENGTH_1 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_LENGTH_1_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_LENGTH_1_BITS _u(0x03ff0000) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_LENGTH_1_MSB _u(25) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_LENGTH_1_LSB _u(16) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_LENGTH_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_FULL_0 +// Description : Buffer 0 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_FULL_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_FULL_0_BITS _u(0x00008000) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_FULL_0_MSB _u(15) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_FULL_0_LSB _u(15) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_FULL_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_LAST_0 +// Description : Buffer 0 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_LAST_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_LAST_0_BITS _u(0x00004000) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_LAST_0_MSB _u(14) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_LAST_0_LSB _u(14) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_LAST_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_PID_0 +// Description : The data pid of buffer 0. +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_PID_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_PID_0_BITS _u(0x00002000) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_PID_0_MSB _u(13) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_PID_0_LSB _u(13) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_PID_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_RESET +// Description : Reset the buffer selector to buffer 0. +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_RESET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_RESET_BITS _u(0x00001000) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_RESET_MSB _u(12) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_RESET_LSB _u(12) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_RESET_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_STALL +// Description : Reply with a stall (valid for both buffers). +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_STALL_BITS _u(0x00000800) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_STALL_MSB _u(11) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_STALL_LSB _u(11) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_AVAILABLE_0 +// Description : Buffer 0 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_AVAILABLE_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_AVAILABLE_0_BITS _u(0x00000400) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_AVAILABLE_0_MSB _u(10) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_AVAILABLE_0_LSB _u(10) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_LENGTH_0 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_LENGTH_0_MSB _u(9) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_LENGTH_0_LSB _u(0) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_LENGTH_0_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL +// Description : Buffer control for both buffers of an endpoint. Fields ending +// in a _1 are for buffer 1. +// Fields ending in a _0 are for buffer 0. Buffer 1 controls are +// only valid if the endpoint is in double buffered mode. +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_OFFSET _u(0x000000d0) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_BITS _u(0xffffffff) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_FULL_1 +// Description : Buffer 1 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_FULL_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_FULL_1_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_FULL_1_MSB _u(31) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_FULL_1_LSB _u(31) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_FULL_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_LAST_1 +// Description : Buffer 1 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_LAST_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_LAST_1_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_LAST_1_MSB _u(30) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_LAST_1_LSB _u(30) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_LAST_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_PID_1 +// Description : The data pid of buffer 1. +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_PID_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_PID_1_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_PID_1_MSB _u(29) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_PID_1_LSB _u(29) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_PID_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSE +// T +// Description : The number of bytes buffer 1 is offset from buffer 0 in +// Isochronous mode. Only valid in double buffered mode for an +// Isochronous endpoint. +// For a non Isochronous endpoint the offset is always 64 bytes. +// 0x0 -> 128 +// 0x1 -> 256 +// 0x2 -> 512 +// 0x3 -> 1024 +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_AVAILABLE_1 +// Description : Buffer 1 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_AVAILABLE_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_AVAILABLE_1_BITS _u(0x04000000) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_AVAILABLE_1_MSB _u(26) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_AVAILABLE_1_LSB _u(26) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_AVAILABLE_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_LENGTH_1 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_LENGTH_1_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_LENGTH_1_BITS _u(0x03ff0000) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_LENGTH_1_MSB _u(25) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_LENGTH_1_LSB _u(16) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_LENGTH_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_FULL_0 +// Description : Buffer 0 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_FULL_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_FULL_0_BITS _u(0x00008000) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_FULL_0_MSB _u(15) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_FULL_0_LSB _u(15) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_FULL_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_LAST_0 +// Description : Buffer 0 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_LAST_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_LAST_0_BITS _u(0x00004000) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_LAST_0_MSB _u(14) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_LAST_0_LSB _u(14) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_LAST_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_PID_0 +// Description : The data pid of buffer 0. +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_PID_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_PID_0_BITS _u(0x00002000) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_PID_0_MSB _u(13) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_PID_0_LSB _u(13) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_PID_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_RESET +// Description : Reset the buffer selector to buffer 0. +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_RESET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_RESET_BITS _u(0x00001000) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_RESET_MSB _u(12) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_RESET_LSB _u(12) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_RESET_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_STALL +// Description : Reply with a stall (valid for both buffers). +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_STALL_BITS _u(0x00000800) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_STALL_MSB _u(11) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_STALL_LSB _u(11) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_AVAILABLE_0 +// Description : Buffer 0 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_AVAILABLE_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_AVAILABLE_0_BITS _u(0x00000400) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_AVAILABLE_0_MSB _u(10) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_AVAILABLE_0_LSB _u(10) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_LENGTH_0 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_LENGTH_0_MSB _u(9) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_LENGTH_0_LSB _u(0) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_LENGTH_0_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL +// Description : Buffer control for both buffers of an endpoint. Fields ending +// in a _1 are for buffer 1. +// Fields ending in a _0 are for buffer 0. Buffer 1 controls are +// only valid if the endpoint is in double buffered mode. +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_OFFSET _u(0x000000d4) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_BITS _u(0xffffffff) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_FULL_1 +// Description : Buffer 1 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_FULL_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_FULL_1_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_FULL_1_MSB _u(31) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_FULL_1_LSB _u(31) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_FULL_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_LAST_1 +// Description : Buffer 1 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_LAST_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_LAST_1_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_LAST_1_MSB _u(30) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_LAST_1_LSB _u(30) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_LAST_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_PID_1 +// Description : The data pid of buffer 1. +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_PID_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_PID_1_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_PID_1_MSB _u(29) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_PID_1_LSB _u(29) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_PID_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFS +// ET +// Description : The number of bytes buffer 1 is offset from buffer 0 in +// Isochronous mode. Only valid in double buffered mode for an +// Isochronous endpoint. +// For a non Isochronous endpoint the offset is always 64 bytes. +// 0x0 -> 128 +// 0x1 -> 256 +// 0x2 -> 512 +// 0x3 -> 1024 +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_AVAILABLE_1 +// Description : Buffer 1 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_AVAILABLE_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_AVAILABLE_1_BITS _u(0x04000000) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_AVAILABLE_1_MSB _u(26) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_AVAILABLE_1_LSB _u(26) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_AVAILABLE_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_LENGTH_1 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_LENGTH_1_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_LENGTH_1_BITS _u(0x03ff0000) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_LENGTH_1_MSB _u(25) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_LENGTH_1_LSB _u(16) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_LENGTH_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_FULL_0 +// Description : Buffer 0 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_FULL_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_FULL_0_BITS _u(0x00008000) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_FULL_0_MSB _u(15) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_FULL_0_LSB _u(15) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_FULL_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_LAST_0 +// Description : Buffer 0 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_LAST_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_LAST_0_BITS _u(0x00004000) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_LAST_0_MSB _u(14) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_LAST_0_LSB _u(14) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_LAST_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_PID_0 +// Description : The data pid of buffer 0. +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_PID_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_PID_0_BITS _u(0x00002000) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_PID_0_MSB _u(13) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_PID_0_LSB _u(13) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_PID_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_RESET +// Description : Reset the buffer selector to buffer 0. +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_RESET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_RESET_BITS _u(0x00001000) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_RESET_MSB _u(12) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_RESET_LSB _u(12) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_RESET_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_STALL +// Description : Reply with a stall (valid for both buffers). +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_STALL_BITS _u(0x00000800) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_STALL_MSB _u(11) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_STALL_LSB _u(11) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_AVAILABLE_0 +// Description : Buffer 0 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_AVAILABLE_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_AVAILABLE_0_BITS _u(0x00000400) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_AVAILABLE_0_MSB _u(10) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_AVAILABLE_0_LSB _u(10) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_LENGTH_0 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_LENGTH_0_MSB _u(9) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_LENGTH_0_LSB _u(0) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_LENGTH_0_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL +// Description : Buffer control for both buffers of an endpoint. Fields ending +// in a _1 are for buffer 1. +// Fields ending in a _0 are for buffer 0. Buffer 1 controls are +// only valid if the endpoint is in double buffered mode. +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_OFFSET _u(0x000000d8) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_BITS _u(0xffffffff) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_FULL_1 +// Description : Buffer 1 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_FULL_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_FULL_1_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_FULL_1_MSB _u(31) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_FULL_1_LSB _u(31) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_FULL_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_LAST_1 +// Description : Buffer 1 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_LAST_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_LAST_1_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_LAST_1_MSB _u(30) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_LAST_1_LSB _u(30) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_LAST_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_PID_1 +// Description : The data pid of buffer 1. +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_PID_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_PID_1_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_PID_1_MSB _u(29) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_PID_1_LSB _u(29) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_PID_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSE +// T +// Description : The number of bytes buffer 1 is offset from buffer 0 in +// Isochronous mode. Only valid in double buffered mode for an +// Isochronous endpoint. +// For a non Isochronous endpoint the offset is always 64 bytes. +// 0x0 -> 128 +// 0x1 -> 256 +// 0x2 -> 512 +// 0x3 -> 1024 +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_AVAILABLE_1 +// Description : Buffer 1 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_AVAILABLE_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_AVAILABLE_1_BITS _u(0x04000000) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_AVAILABLE_1_MSB _u(26) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_AVAILABLE_1_LSB _u(26) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_AVAILABLE_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_LENGTH_1 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_LENGTH_1_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_LENGTH_1_BITS _u(0x03ff0000) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_LENGTH_1_MSB _u(25) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_LENGTH_1_LSB _u(16) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_LENGTH_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_FULL_0 +// Description : Buffer 0 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_FULL_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_FULL_0_BITS _u(0x00008000) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_FULL_0_MSB _u(15) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_FULL_0_LSB _u(15) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_FULL_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_LAST_0 +// Description : Buffer 0 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_LAST_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_LAST_0_BITS _u(0x00004000) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_LAST_0_MSB _u(14) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_LAST_0_LSB _u(14) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_LAST_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_PID_0 +// Description : The data pid of buffer 0. +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_PID_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_PID_0_BITS _u(0x00002000) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_PID_0_MSB _u(13) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_PID_0_LSB _u(13) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_PID_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_RESET +// Description : Reset the buffer selector to buffer 0. +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_RESET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_RESET_BITS _u(0x00001000) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_RESET_MSB _u(12) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_RESET_LSB _u(12) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_RESET_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_STALL +// Description : Reply with a stall (valid for both buffers). +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_STALL_BITS _u(0x00000800) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_STALL_MSB _u(11) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_STALL_LSB _u(11) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_AVAILABLE_0 +// Description : Buffer 0 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_AVAILABLE_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_AVAILABLE_0_BITS _u(0x00000400) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_AVAILABLE_0_MSB _u(10) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_AVAILABLE_0_LSB _u(10) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_LENGTH_0 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_LENGTH_0_MSB _u(9) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_LENGTH_0_LSB _u(0) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_LENGTH_0_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL +// Description : Buffer control for both buffers of an endpoint. Fields ending +// in a _1 are for buffer 1. +// Fields ending in a _0 are for buffer 0. Buffer 1 controls are +// only valid if the endpoint is in double buffered mode. +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_OFFSET _u(0x000000dc) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_BITS _u(0xffffffff) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_FULL_1 +// Description : Buffer 1 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_FULL_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_FULL_1_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_FULL_1_MSB _u(31) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_FULL_1_LSB _u(31) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_FULL_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_LAST_1 +// Description : Buffer 1 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_LAST_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_LAST_1_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_LAST_1_MSB _u(30) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_LAST_1_LSB _u(30) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_LAST_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_PID_1 +// Description : The data pid of buffer 1. +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_PID_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_PID_1_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_PID_1_MSB _u(29) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_PID_1_LSB _u(29) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_PID_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFS +// ET +// Description : The number of bytes buffer 1 is offset from buffer 0 in +// Isochronous mode. Only valid in double buffered mode for an +// Isochronous endpoint. +// For a non Isochronous endpoint the offset is always 64 bytes. +// 0x0 -> 128 +// 0x1 -> 256 +// 0x2 -> 512 +// 0x3 -> 1024 +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_AVAILABLE_1 +// Description : Buffer 1 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_AVAILABLE_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_AVAILABLE_1_BITS _u(0x04000000) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_AVAILABLE_1_MSB _u(26) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_AVAILABLE_1_LSB _u(26) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_AVAILABLE_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_LENGTH_1 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_LENGTH_1_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_LENGTH_1_BITS _u(0x03ff0000) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_LENGTH_1_MSB _u(25) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_LENGTH_1_LSB _u(16) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_LENGTH_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_FULL_0 +// Description : Buffer 0 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_FULL_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_FULL_0_BITS _u(0x00008000) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_FULL_0_MSB _u(15) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_FULL_0_LSB _u(15) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_FULL_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_LAST_0 +// Description : Buffer 0 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_LAST_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_LAST_0_BITS _u(0x00004000) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_LAST_0_MSB _u(14) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_LAST_0_LSB _u(14) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_LAST_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_PID_0 +// Description : The data pid of buffer 0. +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_PID_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_PID_0_BITS _u(0x00002000) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_PID_0_MSB _u(13) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_PID_0_LSB _u(13) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_PID_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_RESET +// Description : Reset the buffer selector to buffer 0. +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_RESET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_RESET_BITS _u(0x00001000) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_RESET_MSB _u(12) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_RESET_LSB _u(12) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_RESET_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_STALL +// Description : Reply with a stall (valid for both buffers). +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_STALL_BITS _u(0x00000800) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_STALL_MSB _u(11) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_STALL_LSB _u(11) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_AVAILABLE_0 +// Description : Buffer 0 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_AVAILABLE_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_AVAILABLE_0_BITS _u(0x00000400) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_AVAILABLE_0_MSB _u(10) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_AVAILABLE_0_LSB _u(10) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_LENGTH_0 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_LENGTH_0_MSB _u(9) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_LENGTH_0_LSB _u(0) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_LENGTH_0_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL +// Description : Buffer control for both buffers of an endpoint. Fields ending +// in a _1 are for buffer 1. +// Fields ending in a _0 are for buffer 0. Buffer 1 controls are +// only valid if the endpoint is in double buffered mode. +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_OFFSET _u(0x000000e0) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_BITS _u(0xffffffff) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_FULL_1 +// Description : Buffer 1 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_FULL_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_FULL_1_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_FULL_1_MSB _u(31) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_FULL_1_LSB _u(31) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_FULL_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_LAST_1 +// Description : Buffer 1 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_LAST_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_LAST_1_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_LAST_1_MSB _u(30) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_LAST_1_LSB _u(30) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_LAST_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_PID_1 +// Description : The data pid of buffer 1. +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_PID_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_PID_1_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_PID_1_MSB _u(29) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_PID_1_LSB _u(29) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_PID_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSE +// T +// Description : The number of bytes buffer 1 is offset from buffer 0 in +// Isochronous mode. Only valid in double buffered mode for an +// Isochronous endpoint. +// For a non Isochronous endpoint the offset is always 64 bytes. +// 0x0 -> 128 +// 0x1 -> 256 +// 0x2 -> 512 +// 0x3 -> 1024 +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_AVAILABLE_1 +// Description : Buffer 1 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_AVAILABLE_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_AVAILABLE_1_BITS _u(0x04000000) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_AVAILABLE_1_MSB _u(26) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_AVAILABLE_1_LSB _u(26) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_AVAILABLE_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_LENGTH_1 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_LENGTH_1_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_LENGTH_1_BITS _u(0x03ff0000) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_LENGTH_1_MSB _u(25) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_LENGTH_1_LSB _u(16) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_LENGTH_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_FULL_0 +// Description : Buffer 0 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_FULL_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_FULL_0_BITS _u(0x00008000) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_FULL_0_MSB _u(15) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_FULL_0_LSB _u(15) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_FULL_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_LAST_0 +// Description : Buffer 0 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_LAST_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_LAST_0_BITS _u(0x00004000) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_LAST_0_MSB _u(14) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_LAST_0_LSB _u(14) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_LAST_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_PID_0 +// Description : The data pid of buffer 0. +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_PID_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_PID_0_BITS _u(0x00002000) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_PID_0_MSB _u(13) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_PID_0_LSB _u(13) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_PID_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_RESET +// Description : Reset the buffer selector to buffer 0. +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_RESET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_RESET_BITS _u(0x00001000) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_RESET_MSB _u(12) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_RESET_LSB _u(12) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_RESET_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_STALL +// Description : Reply with a stall (valid for both buffers). +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_STALL_BITS _u(0x00000800) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_STALL_MSB _u(11) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_STALL_LSB _u(11) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_AVAILABLE_0 +// Description : Buffer 0 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_AVAILABLE_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_AVAILABLE_0_BITS _u(0x00000400) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_AVAILABLE_0_MSB _u(10) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_AVAILABLE_0_LSB _u(10) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_LENGTH_0 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_LENGTH_0_MSB _u(9) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_LENGTH_0_LSB _u(0) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_LENGTH_0_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL +// Description : Buffer control for both buffers of an endpoint. Fields ending +// in a _1 are for buffer 1. +// Fields ending in a _0 are for buffer 0. Buffer 1 controls are +// only valid if the endpoint is in double buffered mode. +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_OFFSET _u(0x000000e4) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_BITS _u(0xffffffff) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_FULL_1 +// Description : Buffer 1 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_FULL_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_FULL_1_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_FULL_1_MSB _u(31) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_FULL_1_LSB _u(31) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_FULL_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_LAST_1 +// Description : Buffer 1 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_LAST_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_LAST_1_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_LAST_1_MSB _u(30) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_LAST_1_LSB _u(30) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_LAST_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_PID_1 +// Description : The data pid of buffer 1. +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_PID_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_PID_1_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_PID_1_MSB _u(29) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_PID_1_LSB _u(29) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_PID_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFS +// ET +// Description : The number of bytes buffer 1 is offset from buffer 0 in +// Isochronous mode. Only valid in double buffered mode for an +// Isochronous endpoint. +// For a non Isochronous endpoint the offset is always 64 bytes. +// 0x0 -> 128 +// 0x1 -> 256 +// 0x2 -> 512 +// 0x3 -> 1024 +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_AVAILABLE_1 +// Description : Buffer 1 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_AVAILABLE_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_AVAILABLE_1_BITS _u(0x04000000) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_AVAILABLE_1_MSB _u(26) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_AVAILABLE_1_LSB _u(26) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_AVAILABLE_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_LENGTH_1 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_LENGTH_1_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_LENGTH_1_BITS _u(0x03ff0000) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_LENGTH_1_MSB _u(25) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_LENGTH_1_LSB _u(16) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_LENGTH_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_FULL_0 +// Description : Buffer 0 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_FULL_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_FULL_0_BITS _u(0x00008000) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_FULL_0_MSB _u(15) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_FULL_0_LSB _u(15) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_FULL_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_LAST_0 +// Description : Buffer 0 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_LAST_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_LAST_0_BITS _u(0x00004000) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_LAST_0_MSB _u(14) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_LAST_0_LSB _u(14) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_LAST_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_PID_0 +// Description : The data pid of buffer 0. +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_PID_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_PID_0_BITS _u(0x00002000) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_PID_0_MSB _u(13) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_PID_0_LSB _u(13) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_PID_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_RESET +// Description : Reset the buffer selector to buffer 0. +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_RESET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_RESET_BITS _u(0x00001000) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_RESET_MSB _u(12) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_RESET_LSB _u(12) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_RESET_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_STALL +// Description : Reply with a stall (valid for both buffers). +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_STALL_BITS _u(0x00000800) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_STALL_MSB _u(11) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_STALL_LSB _u(11) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_AVAILABLE_0 +// Description : Buffer 0 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_AVAILABLE_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_AVAILABLE_0_BITS _u(0x00000400) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_AVAILABLE_0_MSB _u(10) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_AVAILABLE_0_LSB _u(10) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_LENGTH_0 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_LENGTH_0_MSB _u(9) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_LENGTH_0_LSB _u(0) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_LENGTH_0_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL +// Description : Buffer control for both buffers of an endpoint. Fields ending +// in a _1 are for buffer 1. +// Fields ending in a _0 are for buffer 0. Buffer 1 controls are +// only valid if the endpoint is in double buffered mode. +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_OFFSET _u(0x000000e8) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_BITS _u(0xffffffff) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_FULL_1 +// Description : Buffer 1 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_FULL_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_FULL_1_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_FULL_1_MSB _u(31) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_FULL_1_LSB _u(31) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_FULL_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_LAST_1 +// Description : Buffer 1 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_LAST_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_LAST_1_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_LAST_1_MSB _u(30) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_LAST_1_LSB _u(30) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_LAST_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_PID_1 +// Description : The data pid of buffer 1. +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_PID_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_PID_1_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_PID_1_MSB _u(29) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_PID_1_LSB _u(29) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_PID_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSE +// T +// Description : The number of bytes buffer 1 is offset from buffer 0 in +// Isochronous mode. Only valid in double buffered mode for an +// Isochronous endpoint. +// For a non Isochronous endpoint the offset is always 64 bytes. +// 0x0 -> 128 +// 0x1 -> 256 +// 0x2 -> 512 +// 0x3 -> 1024 +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_AVAILABLE_1 +// Description : Buffer 1 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_AVAILABLE_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_AVAILABLE_1_BITS _u(0x04000000) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_AVAILABLE_1_MSB _u(26) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_AVAILABLE_1_LSB _u(26) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_AVAILABLE_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_LENGTH_1 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_LENGTH_1_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_LENGTH_1_BITS _u(0x03ff0000) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_LENGTH_1_MSB _u(25) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_LENGTH_1_LSB _u(16) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_LENGTH_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_FULL_0 +// Description : Buffer 0 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_FULL_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_FULL_0_BITS _u(0x00008000) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_FULL_0_MSB _u(15) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_FULL_0_LSB _u(15) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_FULL_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_LAST_0 +// Description : Buffer 0 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_LAST_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_LAST_0_BITS _u(0x00004000) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_LAST_0_MSB _u(14) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_LAST_0_LSB _u(14) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_LAST_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_PID_0 +// Description : The data pid of buffer 0. +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_PID_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_PID_0_BITS _u(0x00002000) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_PID_0_MSB _u(13) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_PID_0_LSB _u(13) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_PID_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_RESET +// Description : Reset the buffer selector to buffer 0. +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_RESET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_RESET_BITS _u(0x00001000) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_RESET_MSB _u(12) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_RESET_LSB _u(12) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_RESET_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_STALL +// Description : Reply with a stall (valid for both buffers). +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_STALL_BITS _u(0x00000800) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_STALL_MSB _u(11) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_STALL_LSB _u(11) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_AVAILABLE_0 +// Description : Buffer 0 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_AVAILABLE_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_AVAILABLE_0_BITS _u(0x00000400) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_AVAILABLE_0_MSB _u(10) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_AVAILABLE_0_LSB _u(10) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_LENGTH_0 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_LENGTH_0_MSB _u(9) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_LENGTH_0_LSB _u(0) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_LENGTH_0_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL +// Description : Buffer control for both buffers of an endpoint. Fields ending +// in a _1 are for buffer 1. +// Fields ending in a _0 are for buffer 0. Buffer 1 controls are +// only valid if the endpoint is in double buffered mode. +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_OFFSET _u(0x000000ec) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_BITS _u(0xffffffff) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_FULL_1 +// Description : Buffer 1 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_FULL_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_FULL_1_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_FULL_1_MSB _u(31) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_FULL_1_LSB _u(31) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_FULL_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_LAST_1 +// Description : Buffer 1 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_LAST_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_LAST_1_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_LAST_1_MSB _u(30) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_LAST_1_LSB _u(30) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_LAST_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_PID_1 +// Description : The data pid of buffer 1. +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_PID_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_PID_1_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_PID_1_MSB _u(29) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_PID_1_LSB _u(29) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_PID_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFS +// ET +// Description : The number of bytes buffer 1 is offset from buffer 0 in +// Isochronous mode. Only valid in double buffered mode for an +// Isochronous endpoint. +// For a non Isochronous endpoint the offset is always 64 bytes. +// 0x0 -> 128 +// 0x1 -> 256 +// 0x2 -> 512 +// 0x3 -> 1024 +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_AVAILABLE_1 +// Description : Buffer 1 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_AVAILABLE_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_AVAILABLE_1_BITS _u(0x04000000) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_AVAILABLE_1_MSB _u(26) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_AVAILABLE_1_LSB _u(26) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_AVAILABLE_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_LENGTH_1 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_LENGTH_1_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_LENGTH_1_BITS _u(0x03ff0000) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_LENGTH_1_MSB _u(25) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_LENGTH_1_LSB _u(16) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_LENGTH_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_FULL_0 +// Description : Buffer 0 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_FULL_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_FULL_0_BITS _u(0x00008000) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_FULL_0_MSB _u(15) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_FULL_0_LSB _u(15) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_FULL_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_LAST_0 +// Description : Buffer 0 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_LAST_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_LAST_0_BITS _u(0x00004000) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_LAST_0_MSB _u(14) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_LAST_0_LSB _u(14) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_LAST_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_PID_0 +// Description : The data pid of buffer 0. +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_PID_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_PID_0_BITS _u(0x00002000) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_PID_0_MSB _u(13) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_PID_0_LSB _u(13) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_PID_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_RESET +// Description : Reset the buffer selector to buffer 0. +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_RESET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_RESET_BITS _u(0x00001000) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_RESET_MSB _u(12) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_RESET_LSB _u(12) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_RESET_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_STALL +// Description : Reply with a stall (valid for both buffers). +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_STALL_BITS _u(0x00000800) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_STALL_MSB _u(11) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_STALL_LSB _u(11) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_AVAILABLE_0 +// Description : Buffer 0 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_AVAILABLE_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_AVAILABLE_0_BITS _u(0x00000400) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_AVAILABLE_0_MSB _u(10) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_AVAILABLE_0_LSB _u(10) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_LENGTH_0 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_LENGTH_0_MSB _u(9) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_LENGTH_0_LSB _u(0) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_LENGTH_0_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL +// Description : Buffer control for both buffers of an endpoint. Fields ending +// in a _1 are for buffer 1. +// Fields ending in a _0 are for buffer 0. Buffer 1 controls are +// only valid if the endpoint is in double buffered mode. +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_OFFSET _u(0x000000f0) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_BITS _u(0xffffffff) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_FULL_1 +// Description : Buffer 1 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_FULL_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_FULL_1_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_FULL_1_MSB _u(31) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_FULL_1_LSB _u(31) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_FULL_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_LAST_1 +// Description : Buffer 1 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_LAST_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_LAST_1_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_LAST_1_MSB _u(30) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_LAST_1_LSB _u(30) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_LAST_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_PID_1 +// Description : The data pid of buffer 1. +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_PID_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_PID_1_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_PID_1_MSB _u(29) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_PID_1_LSB _u(29) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_PID_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSE +// T +// Description : The number of bytes buffer 1 is offset from buffer 0 in +// Isochronous mode. Only valid in double buffered mode for an +// Isochronous endpoint. +// For a non Isochronous endpoint the offset is always 64 bytes. +// 0x0 -> 128 +// 0x1 -> 256 +// 0x2 -> 512 +// 0x3 -> 1024 +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_AVAILABLE_1 +// Description : Buffer 1 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_AVAILABLE_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_AVAILABLE_1_BITS _u(0x04000000) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_AVAILABLE_1_MSB _u(26) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_AVAILABLE_1_LSB _u(26) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_AVAILABLE_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_LENGTH_1 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_LENGTH_1_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_LENGTH_1_BITS _u(0x03ff0000) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_LENGTH_1_MSB _u(25) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_LENGTH_1_LSB _u(16) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_LENGTH_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_FULL_0 +// Description : Buffer 0 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_FULL_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_FULL_0_BITS _u(0x00008000) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_FULL_0_MSB _u(15) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_FULL_0_LSB _u(15) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_FULL_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_LAST_0 +// Description : Buffer 0 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_LAST_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_LAST_0_BITS _u(0x00004000) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_LAST_0_MSB _u(14) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_LAST_0_LSB _u(14) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_LAST_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_PID_0 +// Description : The data pid of buffer 0. +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_PID_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_PID_0_BITS _u(0x00002000) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_PID_0_MSB _u(13) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_PID_0_LSB _u(13) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_PID_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_RESET +// Description : Reset the buffer selector to buffer 0. +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_RESET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_RESET_BITS _u(0x00001000) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_RESET_MSB _u(12) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_RESET_LSB _u(12) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_RESET_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_STALL +// Description : Reply with a stall (valid for both buffers). +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_STALL_BITS _u(0x00000800) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_STALL_MSB _u(11) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_STALL_LSB _u(11) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_AVAILABLE_0 +// Description : Buffer 0 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_AVAILABLE_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_AVAILABLE_0_BITS _u(0x00000400) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_AVAILABLE_0_MSB _u(10) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_AVAILABLE_0_LSB _u(10) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_LENGTH_0 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_LENGTH_0_MSB _u(9) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_LENGTH_0_LSB _u(0) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_LENGTH_0_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL +// Description : Buffer control for both buffers of an endpoint. Fields ending +// in a _1 are for buffer 1. +// Fields ending in a _0 are for buffer 0. Buffer 1 controls are +// only valid if the endpoint is in double buffered mode. +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_OFFSET _u(0x000000f4) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_BITS _u(0xffffffff) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_FULL_1 +// Description : Buffer 1 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_FULL_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_FULL_1_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_FULL_1_MSB _u(31) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_FULL_1_LSB _u(31) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_FULL_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_LAST_1 +// Description : Buffer 1 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_LAST_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_LAST_1_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_LAST_1_MSB _u(30) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_LAST_1_LSB _u(30) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_LAST_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_PID_1 +// Description : The data pid of buffer 1. +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_PID_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_PID_1_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_PID_1_MSB _u(29) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_PID_1_LSB _u(29) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_PID_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFS +// ET +// Description : The number of bytes buffer 1 is offset from buffer 0 in +// Isochronous mode. Only valid in double buffered mode for an +// Isochronous endpoint. +// For a non Isochronous endpoint the offset is always 64 bytes. +// 0x0 -> 128 +// 0x1 -> 256 +// 0x2 -> 512 +// 0x3 -> 1024 +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_AVAILABLE_1 +// Description : Buffer 1 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_AVAILABLE_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_AVAILABLE_1_BITS _u(0x04000000) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_AVAILABLE_1_MSB _u(26) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_AVAILABLE_1_LSB _u(26) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_AVAILABLE_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_LENGTH_1 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_LENGTH_1_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_LENGTH_1_BITS _u(0x03ff0000) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_LENGTH_1_MSB _u(25) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_LENGTH_1_LSB _u(16) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_LENGTH_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_FULL_0 +// Description : Buffer 0 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_FULL_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_FULL_0_BITS _u(0x00008000) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_FULL_0_MSB _u(15) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_FULL_0_LSB _u(15) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_FULL_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_LAST_0 +// Description : Buffer 0 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_LAST_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_LAST_0_BITS _u(0x00004000) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_LAST_0_MSB _u(14) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_LAST_0_LSB _u(14) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_LAST_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_PID_0 +// Description : The data pid of buffer 0. +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_PID_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_PID_0_BITS _u(0x00002000) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_PID_0_MSB _u(13) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_PID_0_LSB _u(13) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_PID_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_RESET +// Description : Reset the buffer selector to buffer 0. +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_RESET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_RESET_BITS _u(0x00001000) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_RESET_MSB _u(12) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_RESET_LSB _u(12) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_RESET_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_STALL +// Description : Reply with a stall (valid for both buffers). +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_STALL_BITS _u(0x00000800) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_STALL_MSB _u(11) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_STALL_LSB _u(11) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_AVAILABLE_0 +// Description : Buffer 0 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_AVAILABLE_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_AVAILABLE_0_BITS _u(0x00000400) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_AVAILABLE_0_MSB _u(10) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_AVAILABLE_0_LSB _u(10) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_LENGTH_0 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_LENGTH_0_MSB _u(9) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_LENGTH_0_LSB _u(0) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_LENGTH_0_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL +// Description : Buffer control for both buffers of an endpoint. Fields ending +// in a _1 are for buffer 1. +// Fields ending in a _0 are for buffer 0. Buffer 1 controls are +// only valid if the endpoint is in double buffered mode. +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_OFFSET _u(0x000000f8) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_BITS _u(0xffffffff) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_FULL_1 +// Description : Buffer 1 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_FULL_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_FULL_1_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_FULL_1_MSB _u(31) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_FULL_1_LSB _u(31) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_FULL_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_LAST_1 +// Description : Buffer 1 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_LAST_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_LAST_1_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_LAST_1_MSB _u(30) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_LAST_1_LSB _u(30) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_LAST_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_PID_1 +// Description : The data pid of buffer 1. +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_PID_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_PID_1_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_PID_1_MSB _u(29) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_PID_1_LSB _u(29) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_PID_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSE +// T +// Description : The number of bytes buffer 1 is offset from buffer 0 in +// Isochronous mode. Only valid in double buffered mode for an +// Isochronous endpoint. +// For a non Isochronous endpoint the offset is always 64 bytes. +// 0x0 -> 128 +// 0x1 -> 256 +// 0x2 -> 512 +// 0x3 -> 1024 +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_AVAILABLE_1 +// Description : Buffer 1 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_AVAILABLE_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_AVAILABLE_1_BITS _u(0x04000000) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_AVAILABLE_1_MSB _u(26) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_AVAILABLE_1_LSB _u(26) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_AVAILABLE_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_LENGTH_1 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_LENGTH_1_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_LENGTH_1_BITS _u(0x03ff0000) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_LENGTH_1_MSB _u(25) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_LENGTH_1_LSB _u(16) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_LENGTH_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_FULL_0 +// Description : Buffer 0 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_FULL_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_FULL_0_BITS _u(0x00008000) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_FULL_0_MSB _u(15) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_FULL_0_LSB _u(15) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_FULL_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_LAST_0 +// Description : Buffer 0 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_LAST_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_LAST_0_BITS _u(0x00004000) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_LAST_0_MSB _u(14) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_LAST_0_LSB _u(14) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_LAST_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_PID_0 +// Description : The data pid of buffer 0. +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_PID_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_PID_0_BITS _u(0x00002000) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_PID_0_MSB _u(13) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_PID_0_LSB _u(13) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_PID_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_RESET +// Description : Reset the buffer selector to buffer 0. +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_RESET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_RESET_BITS _u(0x00001000) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_RESET_MSB _u(12) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_RESET_LSB _u(12) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_RESET_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_STALL +// Description : Reply with a stall (valid for both buffers). +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_STALL_BITS _u(0x00000800) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_STALL_MSB _u(11) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_STALL_LSB _u(11) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_AVAILABLE_0 +// Description : Buffer 0 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_AVAILABLE_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_AVAILABLE_0_BITS _u(0x00000400) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_AVAILABLE_0_MSB _u(10) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_AVAILABLE_0_LSB _u(10) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_LENGTH_0 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_LENGTH_0_MSB _u(9) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_LENGTH_0_LSB _u(0) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_LENGTH_0_ACCESS "RW" +// ============================================================================= +// Register : USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL +// Description : Buffer control for both buffers of an endpoint. Fields ending +// in a _1 are for buffer 1. +// Fields ending in a _0 are for buffer 0. Buffer 1 controls are +// only valid if the endpoint is in double buffered mode. +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_OFFSET _u(0x000000fc) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_BITS _u(0xffffffff) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_FULL_1 +// Description : Buffer 1 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_FULL_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_FULL_1_BITS _u(0x80000000) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_FULL_1_MSB _u(31) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_FULL_1_LSB _u(31) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_FULL_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_LAST_1 +// Description : Buffer 1 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_LAST_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_LAST_1_BITS _u(0x40000000) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_LAST_1_MSB _u(30) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_LAST_1_LSB _u(30) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_LAST_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_PID_1 +// Description : The data pid of buffer 1. +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_PID_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_PID_1_BITS _u(0x20000000) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_PID_1_MSB _u(29) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_PID_1_LSB _u(29) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_PID_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFS +// ET +// Description : The number of bytes buffer 1 is offset from buffer 0 in +// Isochronous mode. Only valid in double buffered mode for an +// Isochronous endpoint. +// For a non Isochronous endpoint the offset is always 64 bytes. +// 0x0 -> 128 +// 0x1 -> 256 +// 0x2 -> 512 +// 0x3 -> 1024 +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_AVAILABLE_1 +// Description : Buffer 1 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_AVAILABLE_1_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_AVAILABLE_1_BITS _u(0x04000000) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_AVAILABLE_1_MSB _u(26) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_AVAILABLE_1_LSB _u(26) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_AVAILABLE_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_LENGTH_1 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_LENGTH_1_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_LENGTH_1_BITS _u(0x03ff0000) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_LENGTH_1_MSB _u(25) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_LENGTH_1_LSB _u(16) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_LENGTH_1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_FULL_0 +// Description : Buffer 0 is full. For an IN transfer (TX to the host) the bit +// is set to indicate the data is valid. For an OUT transfer (RX +// from the host) this bit should be left as a 0. The host will +// set it when it has filled the buffer with data. +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_FULL_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_FULL_0_BITS _u(0x00008000) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_FULL_0_MSB _u(15) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_FULL_0_LSB _u(15) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_FULL_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_LAST_0 +// Description : Buffer 0 is the last buffer of the transfer. +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_LAST_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_LAST_0_BITS _u(0x00004000) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_LAST_0_MSB _u(14) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_LAST_0_LSB _u(14) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_LAST_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_PID_0 +// Description : The data pid of buffer 0. +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_PID_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_PID_0_BITS _u(0x00002000) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_PID_0_MSB _u(13) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_PID_0_LSB _u(13) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_PID_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_RESET +// Description : Reset the buffer selector to buffer 0. +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_RESET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_RESET_BITS _u(0x00001000) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_RESET_MSB _u(12) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_RESET_LSB _u(12) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_RESET_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_STALL +// Description : Reply with a stall (valid for both buffers). +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_STALL_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_STALL_BITS _u(0x00000800) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_STALL_MSB _u(11) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_STALL_LSB _u(11) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_AVAILABLE_0 +// Description : Buffer 0 is available. This bit is set to indicate the buffer +// can be used by the controller. The controller clears the +// available bit when writing the status back. +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_AVAILABLE_0_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_AVAILABLE_0_BITS _u(0x00000400) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_AVAILABLE_0_MSB _u(10) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_AVAILABLE_0_LSB _u(10) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_LENGTH_0 +// Description : The length of the data in buffer 1. +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_LENGTH_0_MSB _u(9) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_LENGTH_0_LSB _u(0) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_LENGTH_0_ACCESS "RW" +// ============================================================================= +#endif // HARDWARE_REGS_USB_DEVICE_DPRAM_DEFINED |