diff options
Diffstat (limited to 'lib/rp2040/hardware/regs/usb.h')
| -rw-r--r-- | lib/rp2040/hardware/regs/usb.h | 3603 |
1 files changed, 3603 insertions, 0 deletions
diff --git a/lib/rp2040/hardware/regs/usb.h b/lib/rp2040/hardware/regs/usb.h new file mode 100644 index 00000000..5461c291 --- /dev/null +++ b/lib/rp2040/hardware/regs/usb.h @@ -0,0 +1,3603 @@ +/** + * Copyright (c) 2021 Raspberry Pi (Trading) Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +// ============================================================================= +// Register block : USB +// Version : 1 +// Bus type : ahbl +// Description : USB FS/LS controller device registers +// ============================================================================= +#ifndef HARDWARE_REGS_USB_DEFINED +#define HARDWARE_REGS_USB_DEFINED +// ============================================================================= +// Register : USB_ADDR_ENDP +// Description : Device address and endpoint control +#define USB_ADDR_ENDP_OFFSET _u(0x00000000) +#define USB_ADDR_ENDP_BITS _u(0x000f007f) +#define USB_ADDR_ENDP_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP_ENDPOINT +// Description : Device endpoint to send data to. Only valid for HOST mode. +#define USB_ADDR_ENDP_ENDPOINT_RESET _u(0x0) +#define USB_ADDR_ENDP_ENDPOINT_BITS _u(0x000f0000) +#define USB_ADDR_ENDP_ENDPOINT_MSB _u(19) +#define USB_ADDR_ENDP_ENDPOINT_LSB _u(16) +#define USB_ADDR_ENDP_ENDPOINT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP_ADDRESS +// Description : In device mode, the address that the device should respond to. +// Set in response to a SET_ADDR setup packet from the host. In +// host mode set to the address of the device to communicate with. +#define USB_ADDR_ENDP_ADDRESS_RESET _u(0x00) +#define USB_ADDR_ENDP_ADDRESS_BITS _u(0x0000007f) +#define USB_ADDR_ENDP_ADDRESS_MSB _u(6) +#define USB_ADDR_ENDP_ADDRESS_LSB _u(0) +#define USB_ADDR_ENDP_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_ADDR_ENDP1 +// Description : Interrupt endpoint 1. Only valid for HOST mode. +#define USB_ADDR_ENDP1_OFFSET _u(0x00000004) +#define USB_ADDR_ENDP1_BITS _u(0x060f007f) +#define USB_ADDR_ENDP1_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP1_INTEP_PREAMBLE +// Description : Interrupt EP requires preamble (is a low speed device on a full +// speed hub) +#define USB_ADDR_ENDP1_INTEP_PREAMBLE_RESET _u(0x0) +#define USB_ADDR_ENDP1_INTEP_PREAMBLE_BITS _u(0x04000000) +#define USB_ADDR_ENDP1_INTEP_PREAMBLE_MSB _u(26) +#define USB_ADDR_ENDP1_INTEP_PREAMBLE_LSB _u(26) +#define USB_ADDR_ENDP1_INTEP_PREAMBLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP1_INTEP_DIR +// Description : Direction of the interrupt endpoint. In=0, Out=1 +#define USB_ADDR_ENDP1_INTEP_DIR_RESET _u(0x0) +#define USB_ADDR_ENDP1_INTEP_DIR_BITS _u(0x02000000) +#define USB_ADDR_ENDP1_INTEP_DIR_MSB _u(25) +#define USB_ADDR_ENDP1_INTEP_DIR_LSB _u(25) +#define USB_ADDR_ENDP1_INTEP_DIR_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP1_ENDPOINT +// Description : Endpoint number of the interrupt endpoint +#define USB_ADDR_ENDP1_ENDPOINT_RESET _u(0x0) +#define USB_ADDR_ENDP1_ENDPOINT_BITS _u(0x000f0000) +#define USB_ADDR_ENDP1_ENDPOINT_MSB _u(19) +#define USB_ADDR_ENDP1_ENDPOINT_LSB _u(16) +#define USB_ADDR_ENDP1_ENDPOINT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP1_ADDRESS +// Description : Device address +#define USB_ADDR_ENDP1_ADDRESS_RESET _u(0x00) +#define USB_ADDR_ENDP1_ADDRESS_BITS _u(0x0000007f) +#define USB_ADDR_ENDP1_ADDRESS_MSB _u(6) +#define USB_ADDR_ENDP1_ADDRESS_LSB _u(0) +#define USB_ADDR_ENDP1_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_ADDR_ENDP2 +// Description : Interrupt endpoint 2. Only valid for HOST mode. +#define USB_ADDR_ENDP2_OFFSET _u(0x00000008) +#define USB_ADDR_ENDP2_BITS _u(0x060f007f) +#define USB_ADDR_ENDP2_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP2_INTEP_PREAMBLE +// Description : Interrupt EP requires preamble (is a low speed device on a full +// speed hub) +#define USB_ADDR_ENDP2_INTEP_PREAMBLE_RESET _u(0x0) +#define USB_ADDR_ENDP2_INTEP_PREAMBLE_BITS _u(0x04000000) +#define USB_ADDR_ENDP2_INTEP_PREAMBLE_MSB _u(26) +#define USB_ADDR_ENDP2_INTEP_PREAMBLE_LSB _u(26) +#define USB_ADDR_ENDP2_INTEP_PREAMBLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP2_INTEP_DIR +// Description : Direction of the interrupt endpoint. In=0, Out=1 +#define USB_ADDR_ENDP2_INTEP_DIR_RESET _u(0x0) +#define USB_ADDR_ENDP2_INTEP_DIR_BITS _u(0x02000000) +#define USB_ADDR_ENDP2_INTEP_DIR_MSB _u(25) +#define USB_ADDR_ENDP2_INTEP_DIR_LSB _u(25) +#define USB_ADDR_ENDP2_INTEP_DIR_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP2_ENDPOINT +// Description : Endpoint number of the interrupt endpoint +#define USB_ADDR_ENDP2_ENDPOINT_RESET _u(0x0) +#define USB_ADDR_ENDP2_ENDPOINT_BITS _u(0x000f0000) +#define USB_ADDR_ENDP2_ENDPOINT_MSB _u(19) +#define USB_ADDR_ENDP2_ENDPOINT_LSB _u(16) +#define USB_ADDR_ENDP2_ENDPOINT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP2_ADDRESS +// Description : Device address +#define USB_ADDR_ENDP2_ADDRESS_RESET _u(0x00) +#define USB_ADDR_ENDP2_ADDRESS_BITS _u(0x0000007f) +#define USB_ADDR_ENDP2_ADDRESS_MSB _u(6) +#define USB_ADDR_ENDP2_ADDRESS_LSB _u(0) +#define USB_ADDR_ENDP2_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_ADDR_ENDP3 +// Description : Interrupt endpoint 3. Only valid for HOST mode. +#define USB_ADDR_ENDP3_OFFSET _u(0x0000000c) +#define USB_ADDR_ENDP3_BITS _u(0x060f007f) +#define USB_ADDR_ENDP3_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP3_INTEP_PREAMBLE +// Description : Interrupt EP requires preamble (is a low speed device on a full +// speed hub) +#define USB_ADDR_ENDP3_INTEP_PREAMBLE_RESET _u(0x0) +#define USB_ADDR_ENDP3_INTEP_PREAMBLE_BITS _u(0x04000000) +#define USB_ADDR_ENDP3_INTEP_PREAMBLE_MSB _u(26) +#define USB_ADDR_ENDP3_INTEP_PREAMBLE_LSB _u(26) +#define USB_ADDR_ENDP3_INTEP_PREAMBLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP3_INTEP_DIR +// Description : Direction of the interrupt endpoint. In=0, Out=1 +#define USB_ADDR_ENDP3_INTEP_DIR_RESET _u(0x0) +#define USB_ADDR_ENDP3_INTEP_DIR_BITS _u(0x02000000) +#define USB_ADDR_ENDP3_INTEP_DIR_MSB _u(25) +#define USB_ADDR_ENDP3_INTEP_DIR_LSB _u(25) +#define USB_ADDR_ENDP3_INTEP_DIR_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP3_ENDPOINT +// Description : Endpoint number of the interrupt endpoint +#define USB_ADDR_ENDP3_ENDPOINT_RESET _u(0x0) +#define USB_ADDR_ENDP3_ENDPOINT_BITS _u(0x000f0000) +#define USB_ADDR_ENDP3_ENDPOINT_MSB _u(19) +#define USB_ADDR_ENDP3_ENDPOINT_LSB _u(16) +#define USB_ADDR_ENDP3_ENDPOINT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP3_ADDRESS +// Description : Device address +#define USB_ADDR_ENDP3_ADDRESS_RESET _u(0x00) +#define USB_ADDR_ENDP3_ADDRESS_BITS _u(0x0000007f) +#define USB_ADDR_ENDP3_ADDRESS_MSB _u(6) +#define USB_ADDR_ENDP3_ADDRESS_LSB _u(0) +#define USB_ADDR_ENDP3_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_ADDR_ENDP4 +// Description : Interrupt endpoint 4. Only valid for HOST mode. +#define USB_ADDR_ENDP4_OFFSET _u(0x00000010) +#define USB_ADDR_ENDP4_BITS _u(0x060f007f) +#define USB_ADDR_ENDP4_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP4_INTEP_PREAMBLE +// Description : Interrupt EP requires preamble (is a low speed device on a full +// speed hub) +#define USB_ADDR_ENDP4_INTEP_PREAMBLE_RESET _u(0x0) +#define USB_ADDR_ENDP4_INTEP_PREAMBLE_BITS _u(0x04000000) +#define USB_ADDR_ENDP4_INTEP_PREAMBLE_MSB _u(26) +#define USB_ADDR_ENDP4_INTEP_PREAMBLE_LSB _u(26) +#define USB_ADDR_ENDP4_INTEP_PREAMBLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP4_INTEP_DIR +// Description : Direction of the interrupt endpoint. In=0, Out=1 +#define USB_ADDR_ENDP4_INTEP_DIR_RESET _u(0x0) +#define USB_ADDR_ENDP4_INTEP_DIR_BITS _u(0x02000000) +#define USB_ADDR_ENDP4_INTEP_DIR_MSB _u(25) +#define USB_ADDR_ENDP4_INTEP_DIR_LSB _u(25) +#define USB_ADDR_ENDP4_INTEP_DIR_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP4_ENDPOINT +// Description : Endpoint number of the interrupt endpoint +#define USB_ADDR_ENDP4_ENDPOINT_RESET _u(0x0) +#define USB_ADDR_ENDP4_ENDPOINT_BITS _u(0x000f0000) +#define USB_ADDR_ENDP4_ENDPOINT_MSB _u(19) +#define USB_ADDR_ENDP4_ENDPOINT_LSB _u(16) +#define USB_ADDR_ENDP4_ENDPOINT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP4_ADDRESS +// Description : Device address +#define USB_ADDR_ENDP4_ADDRESS_RESET _u(0x00) +#define USB_ADDR_ENDP4_ADDRESS_BITS _u(0x0000007f) +#define USB_ADDR_ENDP4_ADDRESS_MSB _u(6) +#define USB_ADDR_ENDP4_ADDRESS_LSB _u(0) +#define USB_ADDR_ENDP4_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_ADDR_ENDP5 +// Description : Interrupt endpoint 5. Only valid for HOST mode. +#define USB_ADDR_ENDP5_OFFSET _u(0x00000014) +#define USB_ADDR_ENDP5_BITS _u(0x060f007f) +#define USB_ADDR_ENDP5_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP5_INTEP_PREAMBLE +// Description : Interrupt EP requires preamble (is a low speed device on a full +// speed hub) +#define USB_ADDR_ENDP5_INTEP_PREAMBLE_RESET _u(0x0) +#define USB_ADDR_ENDP5_INTEP_PREAMBLE_BITS _u(0x04000000) +#define USB_ADDR_ENDP5_INTEP_PREAMBLE_MSB _u(26) +#define USB_ADDR_ENDP5_INTEP_PREAMBLE_LSB _u(26) +#define USB_ADDR_ENDP5_INTEP_PREAMBLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP5_INTEP_DIR +// Description : Direction of the interrupt endpoint. In=0, Out=1 +#define USB_ADDR_ENDP5_INTEP_DIR_RESET _u(0x0) +#define USB_ADDR_ENDP5_INTEP_DIR_BITS _u(0x02000000) +#define USB_ADDR_ENDP5_INTEP_DIR_MSB _u(25) +#define USB_ADDR_ENDP5_INTEP_DIR_LSB _u(25) +#define USB_ADDR_ENDP5_INTEP_DIR_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP5_ENDPOINT +// Description : Endpoint number of the interrupt endpoint +#define USB_ADDR_ENDP5_ENDPOINT_RESET _u(0x0) +#define USB_ADDR_ENDP5_ENDPOINT_BITS _u(0x000f0000) +#define USB_ADDR_ENDP5_ENDPOINT_MSB _u(19) +#define USB_ADDR_ENDP5_ENDPOINT_LSB _u(16) +#define USB_ADDR_ENDP5_ENDPOINT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP5_ADDRESS +// Description : Device address +#define USB_ADDR_ENDP5_ADDRESS_RESET _u(0x00) +#define USB_ADDR_ENDP5_ADDRESS_BITS _u(0x0000007f) +#define USB_ADDR_ENDP5_ADDRESS_MSB _u(6) +#define USB_ADDR_ENDP5_ADDRESS_LSB _u(0) +#define USB_ADDR_ENDP5_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_ADDR_ENDP6 +// Description : Interrupt endpoint 6. Only valid for HOST mode. +#define USB_ADDR_ENDP6_OFFSET _u(0x00000018) +#define USB_ADDR_ENDP6_BITS _u(0x060f007f) +#define USB_ADDR_ENDP6_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP6_INTEP_PREAMBLE +// Description : Interrupt EP requires preamble (is a low speed device on a full +// speed hub) +#define USB_ADDR_ENDP6_INTEP_PREAMBLE_RESET _u(0x0) +#define USB_ADDR_ENDP6_INTEP_PREAMBLE_BITS _u(0x04000000) +#define USB_ADDR_ENDP6_INTEP_PREAMBLE_MSB _u(26) +#define USB_ADDR_ENDP6_INTEP_PREAMBLE_LSB _u(26) +#define USB_ADDR_ENDP6_INTEP_PREAMBLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP6_INTEP_DIR +// Description : Direction of the interrupt endpoint. In=0, Out=1 +#define USB_ADDR_ENDP6_INTEP_DIR_RESET _u(0x0) +#define USB_ADDR_ENDP6_INTEP_DIR_BITS _u(0x02000000) +#define USB_ADDR_ENDP6_INTEP_DIR_MSB _u(25) +#define USB_ADDR_ENDP6_INTEP_DIR_LSB _u(25) +#define USB_ADDR_ENDP6_INTEP_DIR_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP6_ENDPOINT +// Description : Endpoint number of the interrupt endpoint +#define USB_ADDR_ENDP6_ENDPOINT_RESET _u(0x0) +#define USB_ADDR_ENDP6_ENDPOINT_BITS _u(0x000f0000) +#define USB_ADDR_ENDP6_ENDPOINT_MSB _u(19) +#define USB_ADDR_ENDP6_ENDPOINT_LSB _u(16) +#define USB_ADDR_ENDP6_ENDPOINT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP6_ADDRESS +// Description : Device address +#define USB_ADDR_ENDP6_ADDRESS_RESET _u(0x00) +#define USB_ADDR_ENDP6_ADDRESS_BITS _u(0x0000007f) +#define USB_ADDR_ENDP6_ADDRESS_MSB _u(6) +#define USB_ADDR_ENDP6_ADDRESS_LSB _u(0) +#define USB_ADDR_ENDP6_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_ADDR_ENDP7 +// Description : Interrupt endpoint 7. Only valid for HOST mode. +#define USB_ADDR_ENDP7_OFFSET _u(0x0000001c) +#define USB_ADDR_ENDP7_BITS _u(0x060f007f) +#define USB_ADDR_ENDP7_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP7_INTEP_PREAMBLE +// Description : Interrupt EP requires preamble (is a low speed device on a full +// speed hub) +#define USB_ADDR_ENDP7_INTEP_PREAMBLE_RESET _u(0x0) +#define USB_ADDR_ENDP7_INTEP_PREAMBLE_BITS _u(0x04000000) +#define USB_ADDR_ENDP7_INTEP_PREAMBLE_MSB _u(26) +#define USB_ADDR_ENDP7_INTEP_PREAMBLE_LSB _u(26) +#define USB_ADDR_ENDP7_INTEP_PREAMBLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP7_INTEP_DIR +// Description : Direction of the interrupt endpoint. In=0, Out=1 +#define USB_ADDR_ENDP7_INTEP_DIR_RESET _u(0x0) +#define USB_ADDR_ENDP7_INTEP_DIR_BITS _u(0x02000000) +#define USB_ADDR_ENDP7_INTEP_DIR_MSB _u(25) +#define USB_ADDR_ENDP7_INTEP_DIR_LSB _u(25) +#define USB_ADDR_ENDP7_INTEP_DIR_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP7_ENDPOINT +// Description : Endpoint number of the interrupt endpoint +#define USB_ADDR_ENDP7_ENDPOINT_RESET _u(0x0) +#define USB_ADDR_ENDP7_ENDPOINT_BITS _u(0x000f0000) +#define USB_ADDR_ENDP7_ENDPOINT_MSB _u(19) +#define USB_ADDR_ENDP7_ENDPOINT_LSB _u(16) +#define USB_ADDR_ENDP7_ENDPOINT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP7_ADDRESS +// Description : Device address +#define USB_ADDR_ENDP7_ADDRESS_RESET _u(0x00) +#define USB_ADDR_ENDP7_ADDRESS_BITS _u(0x0000007f) +#define USB_ADDR_ENDP7_ADDRESS_MSB _u(6) +#define USB_ADDR_ENDP7_ADDRESS_LSB _u(0) +#define USB_ADDR_ENDP7_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_ADDR_ENDP8 +// Description : Interrupt endpoint 8. Only valid for HOST mode. +#define USB_ADDR_ENDP8_OFFSET _u(0x00000020) +#define USB_ADDR_ENDP8_BITS _u(0x060f007f) +#define USB_ADDR_ENDP8_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP8_INTEP_PREAMBLE +// Description : Interrupt EP requires preamble (is a low speed device on a full +// speed hub) +#define USB_ADDR_ENDP8_INTEP_PREAMBLE_RESET _u(0x0) +#define USB_ADDR_ENDP8_INTEP_PREAMBLE_BITS _u(0x04000000) +#define USB_ADDR_ENDP8_INTEP_PREAMBLE_MSB _u(26) +#define USB_ADDR_ENDP8_INTEP_PREAMBLE_LSB _u(26) +#define USB_ADDR_ENDP8_INTEP_PREAMBLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP8_INTEP_DIR +// Description : Direction of the interrupt endpoint. In=0, Out=1 +#define USB_ADDR_ENDP8_INTEP_DIR_RESET _u(0x0) +#define USB_ADDR_ENDP8_INTEP_DIR_BITS _u(0x02000000) +#define USB_ADDR_ENDP8_INTEP_DIR_MSB _u(25) +#define USB_ADDR_ENDP8_INTEP_DIR_LSB _u(25) +#define USB_ADDR_ENDP8_INTEP_DIR_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP8_ENDPOINT +// Description : Endpoint number of the interrupt endpoint +#define USB_ADDR_ENDP8_ENDPOINT_RESET _u(0x0) +#define USB_ADDR_ENDP8_ENDPOINT_BITS _u(0x000f0000) +#define USB_ADDR_ENDP8_ENDPOINT_MSB _u(19) +#define USB_ADDR_ENDP8_ENDPOINT_LSB _u(16) +#define USB_ADDR_ENDP8_ENDPOINT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP8_ADDRESS +// Description : Device address +#define USB_ADDR_ENDP8_ADDRESS_RESET _u(0x00) +#define USB_ADDR_ENDP8_ADDRESS_BITS _u(0x0000007f) +#define USB_ADDR_ENDP8_ADDRESS_MSB _u(6) +#define USB_ADDR_ENDP8_ADDRESS_LSB _u(0) +#define USB_ADDR_ENDP8_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_ADDR_ENDP9 +// Description : Interrupt endpoint 9. Only valid for HOST mode. +#define USB_ADDR_ENDP9_OFFSET _u(0x00000024) +#define USB_ADDR_ENDP9_BITS _u(0x060f007f) +#define USB_ADDR_ENDP9_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP9_INTEP_PREAMBLE +// Description : Interrupt EP requires preamble (is a low speed device on a full +// speed hub) +#define USB_ADDR_ENDP9_INTEP_PREAMBLE_RESET _u(0x0) +#define USB_ADDR_ENDP9_INTEP_PREAMBLE_BITS _u(0x04000000) +#define USB_ADDR_ENDP9_INTEP_PREAMBLE_MSB _u(26) +#define USB_ADDR_ENDP9_INTEP_PREAMBLE_LSB _u(26) +#define USB_ADDR_ENDP9_INTEP_PREAMBLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP9_INTEP_DIR +// Description : Direction of the interrupt endpoint. In=0, Out=1 +#define USB_ADDR_ENDP9_INTEP_DIR_RESET _u(0x0) +#define USB_ADDR_ENDP9_INTEP_DIR_BITS _u(0x02000000) +#define USB_ADDR_ENDP9_INTEP_DIR_MSB _u(25) +#define USB_ADDR_ENDP9_INTEP_DIR_LSB _u(25) +#define USB_ADDR_ENDP9_INTEP_DIR_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP9_ENDPOINT +// Description : Endpoint number of the interrupt endpoint +#define USB_ADDR_ENDP9_ENDPOINT_RESET _u(0x0) +#define USB_ADDR_ENDP9_ENDPOINT_BITS _u(0x000f0000) +#define USB_ADDR_ENDP9_ENDPOINT_MSB _u(19) +#define USB_ADDR_ENDP9_ENDPOINT_LSB _u(16) +#define USB_ADDR_ENDP9_ENDPOINT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP9_ADDRESS +// Description : Device address +#define USB_ADDR_ENDP9_ADDRESS_RESET _u(0x00) +#define USB_ADDR_ENDP9_ADDRESS_BITS _u(0x0000007f) +#define USB_ADDR_ENDP9_ADDRESS_MSB _u(6) +#define USB_ADDR_ENDP9_ADDRESS_LSB _u(0) +#define USB_ADDR_ENDP9_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_ADDR_ENDP10 +// Description : Interrupt endpoint 10. Only valid for HOST mode. +#define USB_ADDR_ENDP10_OFFSET _u(0x00000028) +#define USB_ADDR_ENDP10_BITS _u(0x060f007f) +#define USB_ADDR_ENDP10_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP10_INTEP_PREAMBLE +// Description : Interrupt EP requires preamble (is a low speed device on a full +// speed hub) +#define USB_ADDR_ENDP10_INTEP_PREAMBLE_RESET _u(0x0) +#define USB_ADDR_ENDP10_INTEP_PREAMBLE_BITS _u(0x04000000) +#define USB_ADDR_ENDP10_INTEP_PREAMBLE_MSB _u(26) +#define USB_ADDR_ENDP10_INTEP_PREAMBLE_LSB _u(26) +#define USB_ADDR_ENDP10_INTEP_PREAMBLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP10_INTEP_DIR +// Description : Direction of the interrupt endpoint. In=0, Out=1 +#define USB_ADDR_ENDP10_INTEP_DIR_RESET _u(0x0) +#define USB_ADDR_ENDP10_INTEP_DIR_BITS _u(0x02000000) +#define USB_ADDR_ENDP10_INTEP_DIR_MSB _u(25) +#define USB_ADDR_ENDP10_INTEP_DIR_LSB _u(25) +#define USB_ADDR_ENDP10_INTEP_DIR_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP10_ENDPOINT +// Description : Endpoint number of the interrupt endpoint +#define USB_ADDR_ENDP10_ENDPOINT_RESET _u(0x0) +#define USB_ADDR_ENDP10_ENDPOINT_BITS _u(0x000f0000) +#define USB_ADDR_ENDP10_ENDPOINT_MSB _u(19) +#define USB_ADDR_ENDP10_ENDPOINT_LSB _u(16) +#define USB_ADDR_ENDP10_ENDPOINT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP10_ADDRESS +// Description : Device address +#define USB_ADDR_ENDP10_ADDRESS_RESET _u(0x00) +#define USB_ADDR_ENDP10_ADDRESS_BITS _u(0x0000007f) +#define USB_ADDR_ENDP10_ADDRESS_MSB _u(6) +#define USB_ADDR_ENDP10_ADDRESS_LSB _u(0) +#define USB_ADDR_ENDP10_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_ADDR_ENDP11 +// Description : Interrupt endpoint 11. Only valid for HOST mode. +#define USB_ADDR_ENDP11_OFFSET _u(0x0000002c) +#define USB_ADDR_ENDP11_BITS _u(0x060f007f) +#define USB_ADDR_ENDP11_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP11_INTEP_PREAMBLE +// Description : Interrupt EP requires preamble (is a low speed device on a full +// speed hub) +#define USB_ADDR_ENDP11_INTEP_PREAMBLE_RESET _u(0x0) +#define USB_ADDR_ENDP11_INTEP_PREAMBLE_BITS _u(0x04000000) +#define USB_ADDR_ENDP11_INTEP_PREAMBLE_MSB _u(26) +#define USB_ADDR_ENDP11_INTEP_PREAMBLE_LSB _u(26) +#define USB_ADDR_ENDP11_INTEP_PREAMBLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP11_INTEP_DIR +// Description : Direction of the interrupt endpoint. In=0, Out=1 +#define USB_ADDR_ENDP11_INTEP_DIR_RESET _u(0x0) +#define USB_ADDR_ENDP11_INTEP_DIR_BITS _u(0x02000000) +#define USB_ADDR_ENDP11_INTEP_DIR_MSB _u(25) +#define USB_ADDR_ENDP11_INTEP_DIR_LSB _u(25) +#define USB_ADDR_ENDP11_INTEP_DIR_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP11_ENDPOINT +// Description : Endpoint number of the interrupt endpoint +#define USB_ADDR_ENDP11_ENDPOINT_RESET _u(0x0) +#define USB_ADDR_ENDP11_ENDPOINT_BITS _u(0x000f0000) +#define USB_ADDR_ENDP11_ENDPOINT_MSB _u(19) +#define USB_ADDR_ENDP11_ENDPOINT_LSB _u(16) +#define USB_ADDR_ENDP11_ENDPOINT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP11_ADDRESS +// Description : Device address +#define USB_ADDR_ENDP11_ADDRESS_RESET _u(0x00) +#define USB_ADDR_ENDP11_ADDRESS_BITS _u(0x0000007f) +#define USB_ADDR_ENDP11_ADDRESS_MSB _u(6) +#define USB_ADDR_ENDP11_ADDRESS_LSB _u(0) +#define USB_ADDR_ENDP11_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_ADDR_ENDP12 +// Description : Interrupt endpoint 12. Only valid for HOST mode. +#define USB_ADDR_ENDP12_OFFSET _u(0x00000030) +#define USB_ADDR_ENDP12_BITS _u(0x060f007f) +#define USB_ADDR_ENDP12_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP12_INTEP_PREAMBLE +// Description : Interrupt EP requires preamble (is a low speed device on a full +// speed hub) +#define USB_ADDR_ENDP12_INTEP_PREAMBLE_RESET _u(0x0) +#define USB_ADDR_ENDP12_INTEP_PREAMBLE_BITS _u(0x04000000) +#define USB_ADDR_ENDP12_INTEP_PREAMBLE_MSB _u(26) +#define USB_ADDR_ENDP12_INTEP_PREAMBLE_LSB _u(26) +#define USB_ADDR_ENDP12_INTEP_PREAMBLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP12_INTEP_DIR +// Description : Direction of the interrupt endpoint. In=0, Out=1 +#define USB_ADDR_ENDP12_INTEP_DIR_RESET _u(0x0) +#define USB_ADDR_ENDP12_INTEP_DIR_BITS _u(0x02000000) +#define USB_ADDR_ENDP12_INTEP_DIR_MSB _u(25) +#define USB_ADDR_ENDP12_INTEP_DIR_LSB _u(25) +#define USB_ADDR_ENDP12_INTEP_DIR_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP12_ENDPOINT +// Description : Endpoint number of the interrupt endpoint +#define USB_ADDR_ENDP12_ENDPOINT_RESET _u(0x0) +#define USB_ADDR_ENDP12_ENDPOINT_BITS _u(0x000f0000) +#define USB_ADDR_ENDP12_ENDPOINT_MSB _u(19) +#define USB_ADDR_ENDP12_ENDPOINT_LSB _u(16) +#define USB_ADDR_ENDP12_ENDPOINT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP12_ADDRESS +// Description : Device address +#define USB_ADDR_ENDP12_ADDRESS_RESET _u(0x00) +#define USB_ADDR_ENDP12_ADDRESS_BITS _u(0x0000007f) +#define USB_ADDR_ENDP12_ADDRESS_MSB _u(6) +#define USB_ADDR_ENDP12_ADDRESS_LSB _u(0) +#define USB_ADDR_ENDP12_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_ADDR_ENDP13 +// Description : Interrupt endpoint 13. Only valid for HOST mode. +#define USB_ADDR_ENDP13_OFFSET _u(0x00000034) +#define USB_ADDR_ENDP13_BITS _u(0x060f007f) +#define USB_ADDR_ENDP13_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP13_INTEP_PREAMBLE +// Description : Interrupt EP requires preamble (is a low speed device on a full +// speed hub) +#define USB_ADDR_ENDP13_INTEP_PREAMBLE_RESET _u(0x0) +#define USB_ADDR_ENDP13_INTEP_PREAMBLE_BITS _u(0x04000000) +#define USB_ADDR_ENDP13_INTEP_PREAMBLE_MSB _u(26) +#define USB_ADDR_ENDP13_INTEP_PREAMBLE_LSB _u(26) +#define USB_ADDR_ENDP13_INTEP_PREAMBLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP13_INTEP_DIR +// Description : Direction of the interrupt endpoint. In=0, Out=1 +#define USB_ADDR_ENDP13_INTEP_DIR_RESET _u(0x0) +#define USB_ADDR_ENDP13_INTEP_DIR_BITS _u(0x02000000) +#define USB_ADDR_ENDP13_INTEP_DIR_MSB _u(25) +#define USB_ADDR_ENDP13_INTEP_DIR_LSB _u(25) +#define USB_ADDR_ENDP13_INTEP_DIR_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP13_ENDPOINT +// Description : Endpoint number of the interrupt endpoint +#define USB_ADDR_ENDP13_ENDPOINT_RESET _u(0x0) +#define USB_ADDR_ENDP13_ENDPOINT_BITS _u(0x000f0000) +#define USB_ADDR_ENDP13_ENDPOINT_MSB _u(19) +#define USB_ADDR_ENDP13_ENDPOINT_LSB _u(16) +#define USB_ADDR_ENDP13_ENDPOINT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP13_ADDRESS +// Description : Device address +#define USB_ADDR_ENDP13_ADDRESS_RESET _u(0x00) +#define USB_ADDR_ENDP13_ADDRESS_BITS _u(0x0000007f) +#define USB_ADDR_ENDP13_ADDRESS_MSB _u(6) +#define USB_ADDR_ENDP13_ADDRESS_LSB _u(0) +#define USB_ADDR_ENDP13_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_ADDR_ENDP14 +// Description : Interrupt endpoint 14. Only valid for HOST mode. +#define USB_ADDR_ENDP14_OFFSET _u(0x00000038) +#define USB_ADDR_ENDP14_BITS _u(0x060f007f) +#define USB_ADDR_ENDP14_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP14_INTEP_PREAMBLE +// Description : Interrupt EP requires preamble (is a low speed device on a full +// speed hub) +#define USB_ADDR_ENDP14_INTEP_PREAMBLE_RESET _u(0x0) +#define USB_ADDR_ENDP14_INTEP_PREAMBLE_BITS _u(0x04000000) +#define USB_ADDR_ENDP14_INTEP_PREAMBLE_MSB _u(26) +#define USB_ADDR_ENDP14_INTEP_PREAMBLE_LSB _u(26) +#define USB_ADDR_ENDP14_INTEP_PREAMBLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP14_INTEP_DIR +// Description : Direction of the interrupt endpoint. In=0, Out=1 +#define USB_ADDR_ENDP14_INTEP_DIR_RESET _u(0x0) +#define USB_ADDR_ENDP14_INTEP_DIR_BITS _u(0x02000000) +#define USB_ADDR_ENDP14_INTEP_DIR_MSB _u(25) +#define USB_ADDR_ENDP14_INTEP_DIR_LSB _u(25) +#define USB_ADDR_ENDP14_INTEP_DIR_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP14_ENDPOINT +// Description : Endpoint number of the interrupt endpoint +#define USB_ADDR_ENDP14_ENDPOINT_RESET _u(0x0) +#define USB_ADDR_ENDP14_ENDPOINT_BITS _u(0x000f0000) +#define USB_ADDR_ENDP14_ENDPOINT_MSB _u(19) +#define USB_ADDR_ENDP14_ENDPOINT_LSB _u(16) +#define USB_ADDR_ENDP14_ENDPOINT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP14_ADDRESS +// Description : Device address +#define USB_ADDR_ENDP14_ADDRESS_RESET _u(0x00) +#define USB_ADDR_ENDP14_ADDRESS_BITS _u(0x0000007f) +#define USB_ADDR_ENDP14_ADDRESS_MSB _u(6) +#define USB_ADDR_ENDP14_ADDRESS_LSB _u(0) +#define USB_ADDR_ENDP14_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_ADDR_ENDP15 +// Description : Interrupt endpoint 15. Only valid for HOST mode. +#define USB_ADDR_ENDP15_OFFSET _u(0x0000003c) +#define USB_ADDR_ENDP15_BITS _u(0x060f007f) +#define USB_ADDR_ENDP15_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP15_INTEP_PREAMBLE +// Description : Interrupt EP requires preamble (is a low speed device on a full +// speed hub) +#define USB_ADDR_ENDP15_INTEP_PREAMBLE_RESET _u(0x0) +#define USB_ADDR_ENDP15_INTEP_PREAMBLE_BITS _u(0x04000000) +#define USB_ADDR_ENDP15_INTEP_PREAMBLE_MSB _u(26) +#define USB_ADDR_ENDP15_INTEP_PREAMBLE_LSB _u(26) +#define USB_ADDR_ENDP15_INTEP_PREAMBLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP15_INTEP_DIR +// Description : Direction of the interrupt endpoint. In=0, Out=1 +#define USB_ADDR_ENDP15_INTEP_DIR_RESET _u(0x0) +#define USB_ADDR_ENDP15_INTEP_DIR_BITS _u(0x02000000) +#define USB_ADDR_ENDP15_INTEP_DIR_MSB _u(25) +#define USB_ADDR_ENDP15_INTEP_DIR_LSB _u(25) +#define USB_ADDR_ENDP15_INTEP_DIR_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP15_ENDPOINT +// Description : Endpoint number of the interrupt endpoint +#define USB_ADDR_ENDP15_ENDPOINT_RESET _u(0x0) +#define USB_ADDR_ENDP15_ENDPOINT_BITS _u(0x000f0000) +#define USB_ADDR_ENDP15_ENDPOINT_MSB _u(19) +#define USB_ADDR_ENDP15_ENDPOINT_LSB _u(16) +#define USB_ADDR_ENDP15_ENDPOINT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_ADDR_ENDP15_ADDRESS +// Description : Device address +#define USB_ADDR_ENDP15_ADDRESS_RESET _u(0x00) +#define USB_ADDR_ENDP15_ADDRESS_BITS _u(0x0000007f) +#define USB_ADDR_ENDP15_ADDRESS_MSB _u(6) +#define USB_ADDR_ENDP15_ADDRESS_LSB _u(0) +#define USB_ADDR_ENDP15_ADDRESS_ACCESS "RW" +// ============================================================================= +// Register : USB_MAIN_CTRL +// Description : Main control register +#define USB_MAIN_CTRL_OFFSET _u(0x00000040) +#define USB_MAIN_CTRL_BITS _u(0x80000003) +#define USB_MAIN_CTRL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_MAIN_CTRL_SIM_TIMING +// Description : Reduced timings for simulation +#define USB_MAIN_CTRL_SIM_TIMING_RESET _u(0x0) +#define USB_MAIN_CTRL_SIM_TIMING_BITS _u(0x80000000) +#define USB_MAIN_CTRL_SIM_TIMING_MSB _u(31) +#define USB_MAIN_CTRL_SIM_TIMING_LSB _u(31) +#define USB_MAIN_CTRL_SIM_TIMING_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_MAIN_CTRL_HOST_NDEVICE +// Description : Device mode = 0, Host mode = 1 +#define USB_MAIN_CTRL_HOST_NDEVICE_RESET _u(0x0) +#define USB_MAIN_CTRL_HOST_NDEVICE_BITS _u(0x00000002) +#define USB_MAIN_CTRL_HOST_NDEVICE_MSB _u(1) +#define USB_MAIN_CTRL_HOST_NDEVICE_LSB _u(1) +#define USB_MAIN_CTRL_HOST_NDEVICE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_MAIN_CTRL_CONTROLLER_EN +// Description : Enable controller +#define USB_MAIN_CTRL_CONTROLLER_EN_RESET _u(0x0) +#define USB_MAIN_CTRL_CONTROLLER_EN_BITS _u(0x00000001) +#define USB_MAIN_CTRL_CONTROLLER_EN_MSB _u(0) +#define USB_MAIN_CTRL_CONTROLLER_EN_LSB _u(0) +#define USB_MAIN_CTRL_CONTROLLER_EN_ACCESS "RW" +// ============================================================================= +// Register : USB_SOF_WR +// Description : Set the SOF (Start of Frame) frame number in the host +// controller. The SOF packet is sent every 1ms and the host will +// increment the frame number by 1 each time. +#define USB_SOF_WR_OFFSET _u(0x00000044) +#define USB_SOF_WR_BITS _u(0x000007ff) +#define USB_SOF_WR_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_SOF_WR_COUNT +// Description : None +#define USB_SOF_WR_COUNT_RESET _u(0x000) +#define USB_SOF_WR_COUNT_BITS _u(0x000007ff) +#define USB_SOF_WR_COUNT_MSB _u(10) +#define USB_SOF_WR_COUNT_LSB _u(0) +#define USB_SOF_WR_COUNT_ACCESS "WF" +// ============================================================================= +// Register : USB_SOF_RD +// Description : Read the last SOF (Start of Frame) frame number seen. In device +// mode the last SOF received from the host. In host mode the last +// SOF sent by the host. +#define USB_SOF_RD_OFFSET _u(0x00000048) +#define USB_SOF_RD_BITS _u(0x000007ff) +#define USB_SOF_RD_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_SOF_RD_COUNT +// Description : None +#define USB_SOF_RD_COUNT_RESET _u(0x000) +#define USB_SOF_RD_COUNT_BITS _u(0x000007ff) +#define USB_SOF_RD_COUNT_MSB _u(10) +#define USB_SOF_RD_COUNT_LSB _u(0) +#define USB_SOF_RD_COUNT_ACCESS "RO" +// ============================================================================= +// Register : USB_SIE_CTRL +// Description : SIE control register +#define USB_SIE_CTRL_OFFSET _u(0x0000004c) +#define USB_SIE_CTRL_BITS _u(0xff07bf5f) +#define USB_SIE_CTRL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_SIE_CTRL_EP0_INT_STALL +// Description : Device: Set bit in EP_STATUS_STALL_NAK when EP0 sends a STALL +#define USB_SIE_CTRL_EP0_INT_STALL_RESET _u(0x0) +#define USB_SIE_CTRL_EP0_INT_STALL_BITS _u(0x80000000) +#define USB_SIE_CTRL_EP0_INT_STALL_MSB _u(31) +#define USB_SIE_CTRL_EP0_INT_STALL_LSB _u(31) +#define USB_SIE_CTRL_EP0_INT_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_SIE_CTRL_EP0_DOUBLE_BUF +// Description : Device: EP0 single buffered = 0, double buffered = 1 +#define USB_SIE_CTRL_EP0_DOUBLE_BUF_RESET _u(0x0) +#define USB_SIE_CTRL_EP0_DOUBLE_BUF_BITS _u(0x40000000) +#define USB_SIE_CTRL_EP0_DOUBLE_BUF_MSB _u(30) +#define USB_SIE_CTRL_EP0_DOUBLE_BUF_LSB _u(30) +#define USB_SIE_CTRL_EP0_DOUBLE_BUF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_SIE_CTRL_EP0_INT_1BUF +// Description : Device: Set bit in BUFF_STATUS for every buffer completed on +// EP0 +#define USB_SIE_CTRL_EP0_INT_1BUF_RESET _u(0x0) +#define USB_SIE_CTRL_EP0_INT_1BUF_BITS _u(0x20000000) +#define USB_SIE_CTRL_EP0_INT_1BUF_MSB _u(29) +#define USB_SIE_CTRL_EP0_INT_1BUF_LSB _u(29) +#define USB_SIE_CTRL_EP0_INT_1BUF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_SIE_CTRL_EP0_INT_2BUF +// Description : Device: Set bit in BUFF_STATUS for every 2 buffers completed on +// EP0 +#define USB_SIE_CTRL_EP0_INT_2BUF_RESET _u(0x0) +#define USB_SIE_CTRL_EP0_INT_2BUF_BITS _u(0x10000000) +#define USB_SIE_CTRL_EP0_INT_2BUF_MSB _u(28) +#define USB_SIE_CTRL_EP0_INT_2BUF_LSB _u(28) +#define USB_SIE_CTRL_EP0_INT_2BUF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_SIE_CTRL_EP0_INT_NAK +// Description : Device: Set bit in EP_STATUS_STALL_NAK when EP0 sends a NAK +#define USB_SIE_CTRL_EP0_INT_NAK_RESET _u(0x0) +#define USB_SIE_CTRL_EP0_INT_NAK_BITS _u(0x08000000) +#define USB_SIE_CTRL_EP0_INT_NAK_MSB _u(27) +#define USB_SIE_CTRL_EP0_INT_NAK_LSB _u(27) +#define USB_SIE_CTRL_EP0_INT_NAK_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_SIE_CTRL_DIRECT_EN +// Description : Direct bus drive enable +#define USB_SIE_CTRL_DIRECT_EN_RESET _u(0x0) +#define USB_SIE_CTRL_DIRECT_EN_BITS _u(0x04000000) +#define USB_SIE_CTRL_DIRECT_EN_MSB _u(26) +#define USB_SIE_CTRL_DIRECT_EN_LSB _u(26) +#define USB_SIE_CTRL_DIRECT_EN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_SIE_CTRL_DIRECT_DP +// Description : Direct control of DP +#define USB_SIE_CTRL_DIRECT_DP_RESET _u(0x0) +#define USB_SIE_CTRL_DIRECT_DP_BITS _u(0x02000000) +#define USB_SIE_CTRL_DIRECT_DP_MSB _u(25) +#define USB_SIE_CTRL_DIRECT_DP_LSB _u(25) +#define USB_SIE_CTRL_DIRECT_DP_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_SIE_CTRL_DIRECT_DM +// Description : Direct control of DM +#define USB_SIE_CTRL_DIRECT_DM_RESET _u(0x0) +#define USB_SIE_CTRL_DIRECT_DM_BITS _u(0x01000000) +#define USB_SIE_CTRL_DIRECT_DM_MSB _u(24) +#define USB_SIE_CTRL_DIRECT_DM_LSB _u(24) +#define USB_SIE_CTRL_DIRECT_DM_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_SIE_CTRL_TRANSCEIVER_PD +// Description : Power down bus transceiver +#define USB_SIE_CTRL_TRANSCEIVER_PD_RESET _u(0x0) +#define USB_SIE_CTRL_TRANSCEIVER_PD_BITS _u(0x00040000) +#define USB_SIE_CTRL_TRANSCEIVER_PD_MSB _u(18) +#define USB_SIE_CTRL_TRANSCEIVER_PD_LSB _u(18) +#define USB_SIE_CTRL_TRANSCEIVER_PD_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_SIE_CTRL_RPU_OPT +// Description : Device: Pull-up strength (0=1K2, 1=2k3) +#define USB_SIE_CTRL_RPU_OPT_RESET _u(0x0) +#define USB_SIE_CTRL_RPU_OPT_BITS _u(0x00020000) +#define USB_SIE_CTRL_RPU_OPT_MSB _u(17) +#define USB_SIE_CTRL_RPU_OPT_LSB _u(17) +#define USB_SIE_CTRL_RPU_OPT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_SIE_CTRL_PULLUP_EN +// Description : Device: Enable pull up resistor +#define USB_SIE_CTRL_PULLUP_EN_RESET _u(0x0) +#define USB_SIE_CTRL_PULLUP_EN_BITS _u(0x00010000) +#define USB_SIE_CTRL_PULLUP_EN_MSB _u(16) +#define USB_SIE_CTRL_PULLUP_EN_LSB _u(16) +#define USB_SIE_CTRL_PULLUP_EN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_SIE_CTRL_PULLDOWN_EN +// Description : Host: Enable pull down resistors +#define USB_SIE_CTRL_PULLDOWN_EN_RESET _u(0x0) +#define USB_SIE_CTRL_PULLDOWN_EN_BITS _u(0x00008000) +#define USB_SIE_CTRL_PULLDOWN_EN_MSB _u(15) +#define USB_SIE_CTRL_PULLDOWN_EN_LSB _u(15) +#define USB_SIE_CTRL_PULLDOWN_EN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_SIE_CTRL_RESET_BUS +// Description : Host: Reset bus +#define USB_SIE_CTRL_RESET_BUS_RESET _u(0x0) +#define USB_SIE_CTRL_RESET_BUS_BITS _u(0x00002000) +#define USB_SIE_CTRL_RESET_BUS_MSB _u(13) +#define USB_SIE_CTRL_RESET_BUS_LSB _u(13) +#define USB_SIE_CTRL_RESET_BUS_ACCESS "SC" +// ----------------------------------------------------------------------------- +// Field : USB_SIE_CTRL_RESUME +// Description : Device: Remote wakeup. Device can initiate its own resume after +// suspend. +#define USB_SIE_CTRL_RESUME_RESET _u(0x0) +#define USB_SIE_CTRL_RESUME_BITS _u(0x00001000) +#define USB_SIE_CTRL_RESUME_MSB _u(12) +#define USB_SIE_CTRL_RESUME_LSB _u(12) +#define USB_SIE_CTRL_RESUME_ACCESS "SC" +// ----------------------------------------------------------------------------- +// Field : USB_SIE_CTRL_VBUS_EN +// Description : Host: Enable VBUS +#define USB_SIE_CTRL_VBUS_EN_RESET _u(0x0) +#define USB_SIE_CTRL_VBUS_EN_BITS _u(0x00000800) +#define USB_SIE_CTRL_VBUS_EN_MSB _u(11) +#define USB_SIE_CTRL_VBUS_EN_LSB _u(11) +#define USB_SIE_CTRL_VBUS_EN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_SIE_CTRL_KEEP_ALIVE_EN +// Description : Host: Enable keep alive packet (for low speed bus) +#define USB_SIE_CTRL_KEEP_ALIVE_EN_RESET _u(0x0) +#define USB_SIE_CTRL_KEEP_ALIVE_EN_BITS _u(0x00000400) +#define USB_SIE_CTRL_KEEP_ALIVE_EN_MSB _u(10) +#define USB_SIE_CTRL_KEEP_ALIVE_EN_LSB _u(10) +#define USB_SIE_CTRL_KEEP_ALIVE_EN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_SIE_CTRL_SOF_EN +// Description : Host: Enable SOF generation (for full speed bus) +#define USB_SIE_CTRL_SOF_EN_RESET _u(0x0) +#define USB_SIE_CTRL_SOF_EN_BITS _u(0x00000200) +#define USB_SIE_CTRL_SOF_EN_MSB _u(9) +#define USB_SIE_CTRL_SOF_EN_LSB _u(9) +#define USB_SIE_CTRL_SOF_EN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_SIE_CTRL_SOF_SYNC +// Description : Host: Delay packet(s) until after SOF +#define USB_SIE_CTRL_SOF_SYNC_RESET _u(0x0) +#define USB_SIE_CTRL_SOF_SYNC_BITS _u(0x00000100) +#define USB_SIE_CTRL_SOF_SYNC_MSB _u(8) +#define USB_SIE_CTRL_SOF_SYNC_LSB _u(8) +#define USB_SIE_CTRL_SOF_SYNC_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_SIE_CTRL_PREAMBLE_EN +// Description : Host: Preable enable for LS device on FS hub +#define USB_SIE_CTRL_PREAMBLE_EN_RESET _u(0x0) +#define USB_SIE_CTRL_PREAMBLE_EN_BITS _u(0x00000040) +#define USB_SIE_CTRL_PREAMBLE_EN_MSB _u(6) +#define USB_SIE_CTRL_PREAMBLE_EN_LSB _u(6) +#define USB_SIE_CTRL_PREAMBLE_EN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_SIE_CTRL_STOP_TRANS +// Description : Host: Stop transaction +#define USB_SIE_CTRL_STOP_TRANS_RESET _u(0x0) +#define USB_SIE_CTRL_STOP_TRANS_BITS _u(0x00000010) +#define USB_SIE_CTRL_STOP_TRANS_MSB _u(4) +#define USB_SIE_CTRL_STOP_TRANS_LSB _u(4) +#define USB_SIE_CTRL_STOP_TRANS_ACCESS "SC" +// ----------------------------------------------------------------------------- +// Field : USB_SIE_CTRL_RECEIVE_DATA +// Description : Host: Receive transaction (IN to host) +#define USB_SIE_CTRL_RECEIVE_DATA_RESET _u(0x0) +#define USB_SIE_CTRL_RECEIVE_DATA_BITS _u(0x00000008) +#define USB_SIE_CTRL_RECEIVE_DATA_MSB _u(3) +#define USB_SIE_CTRL_RECEIVE_DATA_LSB _u(3) +#define USB_SIE_CTRL_RECEIVE_DATA_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_SIE_CTRL_SEND_DATA +// Description : Host: Send transaction (OUT from host) +#define USB_SIE_CTRL_SEND_DATA_RESET _u(0x0) +#define USB_SIE_CTRL_SEND_DATA_BITS _u(0x00000004) +#define USB_SIE_CTRL_SEND_DATA_MSB _u(2) +#define USB_SIE_CTRL_SEND_DATA_LSB _u(2) +#define USB_SIE_CTRL_SEND_DATA_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_SIE_CTRL_SEND_SETUP +// Description : Host: Send Setup packet +#define USB_SIE_CTRL_SEND_SETUP_RESET _u(0x0) +#define USB_SIE_CTRL_SEND_SETUP_BITS _u(0x00000002) +#define USB_SIE_CTRL_SEND_SETUP_MSB _u(1) +#define USB_SIE_CTRL_SEND_SETUP_LSB _u(1) +#define USB_SIE_CTRL_SEND_SETUP_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_SIE_CTRL_START_TRANS +// Description : Host: Start transaction +#define USB_SIE_CTRL_START_TRANS_RESET _u(0x0) +#define USB_SIE_CTRL_START_TRANS_BITS _u(0x00000001) +#define USB_SIE_CTRL_START_TRANS_MSB _u(0) +#define USB_SIE_CTRL_START_TRANS_LSB _u(0) +#define USB_SIE_CTRL_START_TRANS_ACCESS "SC" +// ============================================================================= +// Register : USB_SIE_STATUS +// Description : SIE status register +#define USB_SIE_STATUS_OFFSET _u(0x00000050) +#define USB_SIE_STATUS_BITS _u(0xff0f0f1d) +#define USB_SIE_STATUS_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_SIE_STATUS_DATA_SEQ_ERROR +// Description : Data Sequence Error. +// +// The device can raise a sequence error in the following +// conditions: +// +// * A SETUP packet is received followed by a DATA1 packet (data +// phase should always be DATA0) * An OUT packet is received from +// the host but doesn't match the data pid in the buffer control +// register read from DPSRAM +// +// The host can raise a data sequence error in the following +// conditions: +// +// * An IN packet from the device has the wrong data PID +#define USB_SIE_STATUS_DATA_SEQ_ERROR_RESET _u(0x0) +#define USB_SIE_STATUS_DATA_SEQ_ERROR_BITS _u(0x80000000) +#define USB_SIE_STATUS_DATA_SEQ_ERROR_MSB _u(31) +#define USB_SIE_STATUS_DATA_SEQ_ERROR_LSB _u(31) +#define USB_SIE_STATUS_DATA_SEQ_ERROR_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_SIE_STATUS_ACK_REC +// Description : ACK received. Raised by both host and device. +#define USB_SIE_STATUS_ACK_REC_RESET _u(0x0) +#define USB_SIE_STATUS_ACK_REC_BITS _u(0x40000000) +#define USB_SIE_STATUS_ACK_REC_MSB _u(30) +#define USB_SIE_STATUS_ACK_REC_LSB _u(30) +#define USB_SIE_STATUS_ACK_REC_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_SIE_STATUS_STALL_REC +// Description : Host: STALL received +#define USB_SIE_STATUS_STALL_REC_RESET _u(0x0) +#define USB_SIE_STATUS_STALL_REC_BITS _u(0x20000000) +#define USB_SIE_STATUS_STALL_REC_MSB _u(29) +#define USB_SIE_STATUS_STALL_REC_LSB _u(29) +#define USB_SIE_STATUS_STALL_REC_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_SIE_STATUS_NAK_REC +// Description : Host: NAK received +#define USB_SIE_STATUS_NAK_REC_RESET _u(0x0) +#define USB_SIE_STATUS_NAK_REC_BITS _u(0x10000000) +#define USB_SIE_STATUS_NAK_REC_MSB _u(28) +#define USB_SIE_STATUS_NAK_REC_LSB _u(28) +#define USB_SIE_STATUS_NAK_REC_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_SIE_STATUS_RX_TIMEOUT +// Description : RX timeout is raised by both the host and device if an ACK is +// not received in the maximum time specified by the USB spec. +#define USB_SIE_STATUS_RX_TIMEOUT_RESET _u(0x0) +#define USB_SIE_STATUS_RX_TIMEOUT_BITS _u(0x08000000) +#define USB_SIE_STATUS_RX_TIMEOUT_MSB _u(27) +#define USB_SIE_STATUS_RX_TIMEOUT_LSB _u(27) +#define USB_SIE_STATUS_RX_TIMEOUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_SIE_STATUS_RX_OVERFLOW +// Description : RX overflow is raised by the Serial RX engine if the incoming +// data is too fast. +#define USB_SIE_STATUS_RX_OVERFLOW_RESET _u(0x0) +#define USB_SIE_STATUS_RX_OVERFLOW_BITS _u(0x04000000) +#define USB_SIE_STATUS_RX_OVERFLOW_MSB _u(26) +#define USB_SIE_STATUS_RX_OVERFLOW_LSB _u(26) +#define USB_SIE_STATUS_RX_OVERFLOW_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_SIE_STATUS_BIT_STUFF_ERROR +// Description : Bit Stuff Error. Raised by the Serial RX engine. +#define USB_SIE_STATUS_BIT_STUFF_ERROR_RESET _u(0x0) +#define USB_SIE_STATUS_BIT_STUFF_ERROR_BITS _u(0x02000000) +#define USB_SIE_STATUS_BIT_STUFF_ERROR_MSB _u(25) +#define USB_SIE_STATUS_BIT_STUFF_ERROR_LSB _u(25) +#define USB_SIE_STATUS_BIT_STUFF_ERROR_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_SIE_STATUS_CRC_ERROR +// Description : CRC Error. Raised by the Serial RX engine. +#define USB_SIE_STATUS_CRC_ERROR_RESET _u(0x0) +#define USB_SIE_STATUS_CRC_ERROR_BITS _u(0x01000000) +#define USB_SIE_STATUS_CRC_ERROR_MSB _u(24) +#define USB_SIE_STATUS_CRC_ERROR_LSB _u(24) +#define USB_SIE_STATUS_CRC_ERROR_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_SIE_STATUS_BUS_RESET +// Description : Device: bus reset received +#define USB_SIE_STATUS_BUS_RESET_RESET _u(0x0) +#define USB_SIE_STATUS_BUS_RESET_BITS _u(0x00080000) +#define USB_SIE_STATUS_BUS_RESET_MSB _u(19) +#define USB_SIE_STATUS_BUS_RESET_LSB _u(19) +#define USB_SIE_STATUS_BUS_RESET_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_SIE_STATUS_TRANS_COMPLETE +// Description : Transaction complete. +// +// Raised by device if: +// +// * An IN or OUT packet is sent with the `LAST_BUFF` bit set in +// the buffer control register +// +// Raised by host if: +// +// * A setup packet is sent when no data in or data out +// transaction follows * An IN packet is received and the +// `LAST_BUFF` bit is set in the buffer control register * An IN +// packet is received with zero length * An OUT packet is sent and +// the `LAST_BUFF` bit is set +#define USB_SIE_STATUS_TRANS_COMPLETE_RESET _u(0x0) +#define USB_SIE_STATUS_TRANS_COMPLETE_BITS _u(0x00040000) +#define USB_SIE_STATUS_TRANS_COMPLETE_MSB _u(18) +#define USB_SIE_STATUS_TRANS_COMPLETE_LSB _u(18) +#define USB_SIE_STATUS_TRANS_COMPLETE_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_SIE_STATUS_SETUP_REC +// Description : Device: Setup packet received +#define USB_SIE_STATUS_SETUP_REC_RESET _u(0x0) +#define USB_SIE_STATUS_SETUP_REC_BITS _u(0x00020000) +#define USB_SIE_STATUS_SETUP_REC_MSB _u(17) +#define USB_SIE_STATUS_SETUP_REC_LSB _u(17) +#define USB_SIE_STATUS_SETUP_REC_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_SIE_STATUS_CONNECTED +// Description : Device: connected +#define USB_SIE_STATUS_CONNECTED_RESET _u(0x0) +#define USB_SIE_STATUS_CONNECTED_BITS _u(0x00010000) +#define USB_SIE_STATUS_CONNECTED_MSB _u(16) +#define USB_SIE_STATUS_CONNECTED_LSB _u(16) +#define USB_SIE_STATUS_CONNECTED_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_SIE_STATUS_RESUME +// Description : Host: Device has initiated a remote resume. Device: host has +// initiated a resume. +#define USB_SIE_STATUS_RESUME_RESET _u(0x0) +#define USB_SIE_STATUS_RESUME_BITS _u(0x00000800) +#define USB_SIE_STATUS_RESUME_MSB _u(11) +#define USB_SIE_STATUS_RESUME_LSB _u(11) +#define USB_SIE_STATUS_RESUME_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_SIE_STATUS_VBUS_OVER_CURR +// Description : VBUS over current detected +#define USB_SIE_STATUS_VBUS_OVER_CURR_RESET _u(0x0) +#define USB_SIE_STATUS_VBUS_OVER_CURR_BITS _u(0x00000400) +#define USB_SIE_STATUS_VBUS_OVER_CURR_MSB _u(10) +#define USB_SIE_STATUS_VBUS_OVER_CURR_LSB _u(10) +#define USB_SIE_STATUS_VBUS_OVER_CURR_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_SIE_STATUS_SPEED +// Description : Host: device speed. Disconnected = 00, LS = 01, FS = 10 +#define USB_SIE_STATUS_SPEED_RESET _u(0x0) +#define USB_SIE_STATUS_SPEED_BITS _u(0x00000300) +#define USB_SIE_STATUS_SPEED_MSB _u(9) +#define USB_SIE_STATUS_SPEED_LSB _u(8) +#define USB_SIE_STATUS_SPEED_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_SIE_STATUS_SUSPENDED +// Description : Bus in suspended state. Valid for device and host. Host and +// device will go into suspend if neither Keep Alive / SOF frames +// are enabled. +#define USB_SIE_STATUS_SUSPENDED_RESET _u(0x0) +#define USB_SIE_STATUS_SUSPENDED_BITS _u(0x00000010) +#define USB_SIE_STATUS_SUSPENDED_MSB _u(4) +#define USB_SIE_STATUS_SUSPENDED_LSB _u(4) +#define USB_SIE_STATUS_SUSPENDED_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_SIE_STATUS_LINE_STATE +// Description : USB bus line state +#define USB_SIE_STATUS_LINE_STATE_RESET _u(0x0) +#define USB_SIE_STATUS_LINE_STATE_BITS _u(0x0000000c) +#define USB_SIE_STATUS_LINE_STATE_MSB _u(3) +#define USB_SIE_STATUS_LINE_STATE_LSB _u(2) +#define USB_SIE_STATUS_LINE_STATE_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_SIE_STATUS_VBUS_DETECTED +// Description : Device: VBUS Detected +#define USB_SIE_STATUS_VBUS_DETECTED_RESET _u(0x0) +#define USB_SIE_STATUS_VBUS_DETECTED_BITS _u(0x00000001) +#define USB_SIE_STATUS_VBUS_DETECTED_MSB _u(0) +#define USB_SIE_STATUS_VBUS_DETECTED_LSB _u(0) +#define USB_SIE_STATUS_VBUS_DETECTED_ACCESS "RO" +// ============================================================================= +// Register : USB_INT_EP_CTRL +// Description : interrupt endpoint control register +#define USB_INT_EP_CTRL_OFFSET _u(0x00000054) +#define USB_INT_EP_CTRL_BITS _u(0x0000fffe) +#define USB_INT_EP_CTRL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_INT_EP_CTRL_INT_EP_ACTIVE +// Description : Host: Enable interrupt endpoint 1 -> 15 +#define USB_INT_EP_CTRL_INT_EP_ACTIVE_RESET _u(0x0000) +#define USB_INT_EP_CTRL_INT_EP_ACTIVE_BITS _u(0x0000fffe) +#define USB_INT_EP_CTRL_INT_EP_ACTIVE_MSB _u(15) +#define USB_INT_EP_CTRL_INT_EP_ACTIVE_LSB _u(1) +#define USB_INT_EP_CTRL_INT_EP_ACTIVE_ACCESS "RW" +// ============================================================================= +// Register : USB_BUFF_STATUS +// Description : Buffer status register. A bit set here indicates that a buffer +// has completed on the endpoint (if the buffer interrupt is +// enabled). It is possible for 2 buffers to be completed, so +// clearing the buffer status bit may instantly re set it on the +// next clock cycle. +#define USB_BUFF_STATUS_OFFSET _u(0x00000058) +#define USB_BUFF_STATUS_BITS _u(0xffffffff) +#define USB_BUFF_STATUS_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_STATUS_EP15_OUT +// Description : None +#define USB_BUFF_STATUS_EP15_OUT_RESET _u(0x0) +#define USB_BUFF_STATUS_EP15_OUT_BITS _u(0x80000000) +#define USB_BUFF_STATUS_EP15_OUT_MSB _u(31) +#define USB_BUFF_STATUS_EP15_OUT_LSB _u(31) +#define USB_BUFF_STATUS_EP15_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_STATUS_EP15_IN +// Description : None +#define USB_BUFF_STATUS_EP15_IN_RESET _u(0x0) +#define USB_BUFF_STATUS_EP15_IN_BITS _u(0x40000000) +#define USB_BUFF_STATUS_EP15_IN_MSB _u(30) +#define USB_BUFF_STATUS_EP15_IN_LSB _u(30) +#define USB_BUFF_STATUS_EP15_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_STATUS_EP14_OUT +// Description : None +#define USB_BUFF_STATUS_EP14_OUT_RESET _u(0x0) +#define USB_BUFF_STATUS_EP14_OUT_BITS _u(0x20000000) +#define USB_BUFF_STATUS_EP14_OUT_MSB _u(29) +#define USB_BUFF_STATUS_EP14_OUT_LSB _u(29) +#define USB_BUFF_STATUS_EP14_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_STATUS_EP14_IN +// Description : None +#define USB_BUFF_STATUS_EP14_IN_RESET _u(0x0) +#define USB_BUFF_STATUS_EP14_IN_BITS _u(0x10000000) +#define USB_BUFF_STATUS_EP14_IN_MSB _u(28) +#define USB_BUFF_STATUS_EP14_IN_LSB _u(28) +#define USB_BUFF_STATUS_EP14_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_STATUS_EP13_OUT +// Description : None +#define USB_BUFF_STATUS_EP13_OUT_RESET _u(0x0) +#define USB_BUFF_STATUS_EP13_OUT_BITS _u(0x08000000) +#define USB_BUFF_STATUS_EP13_OUT_MSB _u(27) +#define USB_BUFF_STATUS_EP13_OUT_LSB _u(27) +#define USB_BUFF_STATUS_EP13_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_STATUS_EP13_IN +// Description : None +#define USB_BUFF_STATUS_EP13_IN_RESET _u(0x0) +#define USB_BUFF_STATUS_EP13_IN_BITS _u(0x04000000) +#define USB_BUFF_STATUS_EP13_IN_MSB _u(26) +#define USB_BUFF_STATUS_EP13_IN_LSB _u(26) +#define USB_BUFF_STATUS_EP13_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_STATUS_EP12_OUT +// Description : None +#define USB_BUFF_STATUS_EP12_OUT_RESET _u(0x0) +#define USB_BUFF_STATUS_EP12_OUT_BITS _u(0x02000000) +#define USB_BUFF_STATUS_EP12_OUT_MSB _u(25) +#define USB_BUFF_STATUS_EP12_OUT_LSB _u(25) +#define USB_BUFF_STATUS_EP12_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_STATUS_EP12_IN +// Description : None +#define USB_BUFF_STATUS_EP12_IN_RESET _u(0x0) +#define USB_BUFF_STATUS_EP12_IN_BITS _u(0x01000000) +#define USB_BUFF_STATUS_EP12_IN_MSB _u(24) +#define USB_BUFF_STATUS_EP12_IN_LSB _u(24) +#define USB_BUFF_STATUS_EP12_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_STATUS_EP11_OUT +// Description : None +#define USB_BUFF_STATUS_EP11_OUT_RESET _u(0x0) +#define USB_BUFF_STATUS_EP11_OUT_BITS _u(0x00800000) +#define USB_BUFF_STATUS_EP11_OUT_MSB _u(23) +#define USB_BUFF_STATUS_EP11_OUT_LSB _u(23) +#define USB_BUFF_STATUS_EP11_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_STATUS_EP11_IN +// Description : None +#define USB_BUFF_STATUS_EP11_IN_RESET _u(0x0) +#define USB_BUFF_STATUS_EP11_IN_BITS _u(0x00400000) +#define USB_BUFF_STATUS_EP11_IN_MSB _u(22) +#define USB_BUFF_STATUS_EP11_IN_LSB _u(22) +#define USB_BUFF_STATUS_EP11_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_STATUS_EP10_OUT +// Description : None +#define USB_BUFF_STATUS_EP10_OUT_RESET _u(0x0) +#define USB_BUFF_STATUS_EP10_OUT_BITS _u(0x00200000) +#define USB_BUFF_STATUS_EP10_OUT_MSB _u(21) +#define USB_BUFF_STATUS_EP10_OUT_LSB _u(21) +#define USB_BUFF_STATUS_EP10_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_STATUS_EP10_IN +// Description : None +#define USB_BUFF_STATUS_EP10_IN_RESET _u(0x0) +#define USB_BUFF_STATUS_EP10_IN_BITS _u(0x00100000) +#define USB_BUFF_STATUS_EP10_IN_MSB _u(20) +#define USB_BUFF_STATUS_EP10_IN_LSB _u(20) +#define USB_BUFF_STATUS_EP10_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_STATUS_EP9_OUT +// Description : None +#define USB_BUFF_STATUS_EP9_OUT_RESET _u(0x0) +#define USB_BUFF_STATUS_EP9_OUT_BITS _u(0x00080000) +#define USB_BUFF_STATUS_EP9_OUT_MSB _u(19) +#define USB_BUFF_STATUS_EP9_OUT_LSB _u(19) +#define USB_BUFF_STATUS_EP9_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_STATUS_EP9_IN +// Description : None +#define USB_BUFF_STATUS_EP9_IN_RESET _u(0x0) +#define USB_BUFF_STATUS_EP9_IN_BITS _u(0x00040000) +#define USB_BUFF_STATUS_EP9_IN_MSB _u(18) +#define USB_BUFF_STATUS_EP9_IN_LSB _u(18) +#define USB_BUFF_STATUS_EP9_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_STATUS_EP8_OUT +// Description : None +#define USB_BUFF_STATUS_EP8_OUT_RESET _u(0x0) +#define USB_BUFF_STATUS_EP8_OUT_BITS _u(0x00020000) +#define USB_BUFF_STATUS_EP8_OUT_MSB _u(17) +#define USB_BUFF_STATUS_EP8_OUT_LSB _u(17) +#define USB_BUFF_STATUS_EP8_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_STATUS_EP8_IN +// Description : None +#define USB_BUFF_STATUS_EP8_IN_RESET _u(0x0) +#define USB_BUFF_STATUS_EP8_IN_BITS _u(0x00010000) +#define USB_BUFF_STATUS_EP8_IN_MSB _u(16) +#define USB_BUFF_STATUS_EP8_IN_LSB _u(16) +#define USB_BUFF_STATUS_EP8_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_STATUS_EP7_OUT +// Description : None +#define USB_BUFF_STATUS_EP7_OUT_RESET _u(0x0) +#define USB_BUFF_STATUS_EP7_OUT_BITS _u(0x00008000) +#define USB_BUFF_STATUS_EP7_OUT_MSB _u(15) +#define USB_BUFF_STATUS_EP7_OUT_LSB _u(15) +#define USB_BUFF_STATUS_EP7_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_STATUS_EP7_IN +// Description : None +#define USB_BUFF_STATUS_EP7_IN_RESET _u(0x0) +#define USB_BUFF_STATUS_EP7_IN_BITS _u(0x00004000) +#define USB_BUFF_STATUS_EP7_IN_MSB _u(14) +#define USB_BUFF_STATUS_EP7_IN_LSB _u(14) +#define USB_BUFF_STATUS_EP7_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_STATUS_EP6_OUT +// Description : None +#define USB_BUFF_STATUS_EP6_OUT_RESET _u(0x0) +#define USB_BUFF_STATUS_EP6_OUT_BITS _u(0x00002000) +#define USB_BUFF_STATUS_EP6_OUT_MSB _u(13) +#define USB_BUFF_STATUS_EP6_OUT_LSB _u(13) +#define USB_BUFF_STATUS_EP6_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_STATUS_EP6_IN +// Description : None +#define USB_BUFF_STATUS_EP6_IN_RESET _u(0x0) +#define USB_BUFF_STATUS_EP6_IN_BITS _u(0x00001000) +#define USB_BUFF_STATUS_EP6_IN_MSB _u(12) +#define USB_BUFF_STATUS_EP6_IN_LSB _u(12) +#define USB_BUFF_STATUS_EP6_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_STATUS_EP5_OUT +// Description : None +#define USB_BUFF_STATUS_EP5_OUT_RESET _u(0x0) +#define USB_BUFF_STATUS_EP5_OUT_BITS _u(0x00000800) +#define USB_BUFF_STATUS_EP5_OUT_MSB _u(11) +#define USB_BUFF_STATUS_EP5_OUT_LSB _u(11) +#define USB_BUFF_STATUS_EP5_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_STATUS_EP5_IN +// Description : None +#define USB_BUFF_STATUS_EP5_IN_RESET _u(0x0) +#define USB_BUFF_STATUS_EP5_IN_BITS _u(0x00000400) +#define USB_BUFF_STATUS_EP5_IN_MSB _u(10) +#define USB_BUFF_STATUS_EP5_IN_LSB _u(10) +#define USB_BUFF_STATUS_EP5_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_STATUS_EP4_OUT +// Description : None +#define USB_BUFF_STATUS_EP4_OUT_RESET _u(0x0) +#define USB_BUFF_STATUS_EP4_OUT_BITS _u(0x00000200) +#define USB_BUFF_STATUS_EP4_OUT_MSB _u(9) +#define USB_BUFF_STATUS_EP4_OUT_LSB _u(9) +#define USB_BUFF_STATUS_EP4_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_STATUS_EP4_IN +// Description : None +#define USB_BUFF_STATUS_EP4_IN_RESET _u(0x0) +#define USB_BUFF_STATUS_EP4_IN_BITS _u(0x00000100) +#define USB_BUFF_STATUS_EP4_IN_MSB _u(8) +#define USB_BUFF_STATUS_EP4_IN_LSB _u(8) +#define USB_BUFF_STATUS_EP4_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_STATUS_EP3_OUT +// Description : None +#define USB_BUFF_STATUS_EP3_OUT_RESET _u(0x0) +#define USB_BUFF_STATUS_EP3_OUT_BITS _u(0x00000080) +#define USB_BUFF_STATUS_EP3_OUT_MSB _u(7) +#define USB_BUFF_STATUS_EP3_OUT_LSB _u(7) +#define USB_BUFF_STATUS_EP3_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_STATUS_EP3_IN +// Description : None +#define USB_BUFF_STATUS_EP3_IN_RESET _u(0x0) +#define USB_BUFF_STATUS_EP3_IN_BITS _u(0x00000040) +#define USB_BUFF_STATUS_EP3_IN_MSB _u(6) +#define USB_BUFF_STATUS_EP3_IN_LSB _u(6) +#define USB_BUFF_STATUS_EP3_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_STATUS_EP2_OUT +// Description : None +#define USB_BUFF_STATUS_EP2_OUT_RESET _u(0x0) +#define USB_BUFF_STATUS_EP2_OUT_BITS _u(0x00000020) +#define USB_BUFF_STATUS_EP2_OUT_MSB _u(5) +#define USB_BUFF_STATUS_EP2_OUT_LSB _u(5) +#define USB_BUFF_STATUS_EP2_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_STATUS_EP2_IN +// Description : None +#define USB_BUFF_STATUS_EP2_IN_RESET _u(0x0) +#define USB_BUFF_STATUS_EP2_IN_BITS _u(0x00000010) +#define USB_BUFF_STATUS_EP2_IN_MSB _u(4) +#define USB_BUFF_STATUS_EP2_IN_LSB _u(4) +#define USB_BUFF_STATUS_EP2_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_STATUS_EP1_OUT +// Description : None +#define USB_BUFF_STATUS_EP1_OUT_RESET _u(0x0) +#define USB_BUFF_STATUS_EP1_OUT_BITS _u(0x00000008) +#define USB_BUFF_STATUS_EP1_OUT_MSB _u(3) +#define USB_BUFF_STATUS_EP1_OUT_LSB _u(3) +#define USB_BUFF_STATUS_EP1_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_STATUS_EP1_IN +// Description : None +#define USB_BUFF_STATUS_EP1_IN_RESET _u(0x0) +#define USB_BUFF_STATUS_EP1_IN_BITS _u(0x00000004) +#define USB_BUFF_STATUS_EP1_IN_MSB _u(2) +#define USB_BUFF_STATUS_EP1_IN_LSB _u(2) +#define USB_BUFF_STATUS_EP1_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_STATUS_EP0_OUT +// Description : None +#define USB_BUFF_STATUS_EP0_OUT_RESET _u(0x0) +#define USB_BUFF_STATUS_EP0_OUT_BITS _u(0x00000002) +#define USB_BUFF_STATUS_EP0_OUT_MSB _u(1) +#define USB_BUFF_STATUS_EP0_OUT_LSB _u(1) +#define USB_BUFF_STATUS_EP0_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_STATUS_EP0_IN +// Description : None +#define USB_BUFF_STATUS_EP0_IN_RESET _u(0x0) +#define USB_BUFF_STATUS_EP0_IN_BITS _u(0x00000001) +#define USB_BUFF_STATUS_EP0_IN_MSB _u(0) +#define USB_BUFF_STATUS_EP0_IN_LSB _u(0) +#define USB_BUFF_STATUS_EP0_IN_ACCESS "WC" +// ============================================================================= +// Register : USB_BUFF_CPU_SHOULD_HANDLE +// Description : Which of the double buffers should be handled. Only valid if +// using an interrupt per buffer (i.e. not per 2 buffers). Not +// valid for host interrupt endpoint polling because they are only +// single buffered. +#define USB_BUFF_CPU_SHOULD_HANDLE_OFFSET _u(0x0000005c) +#define USB_BUFF_CPU_SHOULD_HANDLE_BITS _u(0xffffffff) +#define USB_BUFF_CPU_SHOULD_HANDLE_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_CPU_SHOULD_HANDLE_EP15_OUT +// Description : None +#define USB_BUFF_CPU_SHOULD_HANDLE_EP15_OUT_RESET _u(0x0) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP15_OUT_BITS _u(0x80000000) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP15_OUT_MSB _u(31) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP15_OUT_LSB _u(31) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP15_OUT_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_CPU_SHOULD_HANDLE_EP15_IN +// Description : None +#define USB_BUFF_CPU_SHOULD_HANDLE_EP15_IN_RESET _u(0x0) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP15_IN_BITS _u(0x40000000) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP15_IN_MSB _u(30) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP15_IN_LSB _u(30) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP15_IN_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_CPU_SHOULD_HANDLE_EP14_OUT +// Description : None +#define USB_BUFF_CPU_SHOULD_HANDLE_EP14_OUT_RESET _u(0x0) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP14_OUT_BITS _u(0x20000000) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP14_OUT_MSB _u(29) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP14_OUT_LSB _u(29) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP14_OUT_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_CPU_SHOULD_HANDLE_EP14_IN +// Description : None +#define USB_BUFF_CPU_SHOULD_HANDLE_EP14_IN_RESET _u(0x0) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP14_IN_BITS _u(0x10000000) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP14_IN_MSB _u(28) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP14_IN_LSB _u(28) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP14_IN_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_CPU_SHOULD_HANDLE_EP13_OUT +// Description : None +#define USB_BUFF_CPU_SHOULD_HANDLE_EP13_OUT_RESET _u(0x0) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP13_OUT_BITS _u(0x08000000) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP13_OUT_MSB _u(27) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP13_OUT_LSB _u(27) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP13_OUT_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_CPU_SHOULD_HANDLE_EP13_IN +// Description : None +#define USB_BUFF_CPU_SHOULD_HANDLE_EP13_IN_RESET _u(0x0) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP13_IN_BITS _u(0x04000000) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP13_IN_MSB _u(26) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP13_IN_LSB _u(26) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP13_IN_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_CPU_SHOULD_HANDLE_EP12_OUT +// Description : None +#define USB_BUFF_CPU_SHOULD_HANDLE_EP12_OUT_RESET _u(0x0) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP12_OUT_BITS _u(0x02000000) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP12_OUT_MSB _u(25) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP12_OUT_LSB _u(25) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP12_OUT_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_CPU_SHOULD_HANDLE_EP12_IN +// Description : None +#define USB_BUFF_CPU_SHOULD_HANDLE_EP12_IN_RESET _u(0x0) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP12_IN_BITS _u(0x01000000) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP12_IN_MSB _u(24) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP12_IN_LSB _u(24) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP12_IN_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_CPU_SHOULD_HANDLE_EP11_OUT +// Description : None +#define USB_BUFF_CPU_SHOULD_HANDLE_EP11_OUT_RESET _u(0x0) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP11_OUT_BITS _u(0x00800000) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP11_OUT_MSB _u(23) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP11_OUT_LSB _u(23) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP11_OUT_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_CPU_SHOULD_HANDLE_EP11_IN +// Description : None +#define USB_BUFF_CPU_SHOULD_HANDLE_EP11_IN_RESET _u(0x0) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP11_IN_BITS _u(0x00400000) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP11_IN_MSB _u(22) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP11_IN_LSB _u(22) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP11_IN_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_CPU_SHOULD_HANDLE_EP10_OUT +// Description : None +#define USB_BUFF_CPU_SHOULD_HANDLE_EP10_OUT_RESET _u(0x0) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP10_OUT_BITS _u(0x00200000) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP10_OUT_MSB _u(21) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP10_OUT_LSB _u(21) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP10_OUT_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_CPU_SHOULD_HANDLE_EP10_IN +// Description : None +#define USB_BUFF_CPU_SHOULD_HANDLE_EP10_IN_RESET _u(0x0) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP10_IN_BITS _u(0x00100000) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP10_IN_MSB _u(20) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP10_IN_LSB _u(20) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP10_IN_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_CPU_SHOULD_HANDLE_EP9_OUT +// Description : None +#define USB_BUFF_CPU_SHOULD_HANDLE_EP9_OUT_RESET _u(0x0) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP9_OUT_BITS _u(0x00080000) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP9_OUT_MSB _u(19) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP9_OUT_LSB _u(19) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP9_OUT_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_CPU_SHOULD_HANDLE_EP9_IN +// Description : None +#define USB_BUFF_CPU_SHOULD_HANDLE_EP9_IN_RESET _u(0x0) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP9_IN_BITS _u(0x00040000) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP9_IN_MSB _u(18) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP9_IN_LSB _u(18) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP9_IN_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_CPU_SHOULD_HANDLE_EP8_OUT +// Description : None +#define USB_BUFF_CPU_SHOULD_HANDLE_EP8_OUT_RESET _u(0x0) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP8_OUT_BITS _u(0x00020000) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP8_OUT_MSB _u(17) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP8_OUT_LSB _u(17) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP8_OUT_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_CPU_SHOULD_HANDLE_EP8_IN +// Description : None +#define USB_BUFF_CPU_SHOULD_HANDLE_EP8_IN_RESET _u(0x0) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP8_IN_BITS _u(0x00010000) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP8_IN_MSB _u(16) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP8_IN_LSB _u(16) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP8_IN_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_CPU_SHOULD_HANDLE_EP7_OUT +// Description : None +#define USB_BUFF_CPU_SHOULD_HANDLE_EP7_OUT_RESET _u(0x0) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP7_OUT_BITS _u(0x00008000) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP7_OUT_MSB _u(15) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP7_OUT_LSB _u(15) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP7_OUT_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_CPU_SHOULD_HANDLE_EP7_IN +// Description : None +#define USB_BUFF_CPU_SHOULD_HANDLE_EP7_IN_RESET _u(0x0) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP7_IN_BITS _u(0x00004000) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP7_IN_MSB _u(14) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP7_IN_LSB _u(14) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP7_IN_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_CPU_SHOULD_HANDLE_EP6_OUT +// Description : None +#define USB_BUFF_CPU_SHOULD_HANDLE_EP6_OUT_RESET _u(0x0) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP6_OUT_BITS _u(0x00002000) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP6_OUT_MSB _u(13) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP6_OUT_LSB _u(13) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP6_OUT_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_CPU_SHOULD_HANDLE_EP6_IN +// Description : None +#define USB_BUFF_CPU_SHOULD_HANDLE_EP6_IN_RESET _u(0x0) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP6_IN_BITS _u(0x00001000) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP6_IN_MSB _u(12) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP6_IN_LSB _u(12) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP6_IN_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_CPU_SHOULD_HANDLE_EP5_OUT +// Description : None +#define USB_BUFF_CPU_SHOULD_HANDLE_EP5_OUT_RESET _u(0x0) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP5_OUT_BITS _u(0x00000800) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP5_OUT_MSB _u(11) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP5_OUT_LSB _u(11) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP5_OUT_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_CPU_SHOULD_HANDLE_EP5_IN +// Description : None +#define USB_BUFF_CPU_SHOULD_HANDLE_EP5_IN_RESET _u(0x0) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP5_IN_BITS _u(0x00000400) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP5_IN_MSB _u(10) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP5_IN_LSB _u(10) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP5_IN_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_CPU_SHOULD_HANDLE_EP4_OUT +// Description : None +#define USB_BUFF_CPU_SHOULD_HANDLE_EP4_OUT_RESET _u(0x0) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP4_OUT_BITS _u(0x00000200) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP4_OUT_MSB _u(9) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP4_OUT_LSB _u(9) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP4_OUT_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_CPU_SHOULD_HANDLE_EP4_IN +// Description : None +#define USB_BUFF_CPU_SHOULD_HANDLE_EP4_IN_RESET _u(0x0) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP4_IN_BITS _u(0x00000100) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP4_IN_MSB _u(8) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP4_IN_LSB _u(8) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP4_IN_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_CPU_SHOULD_HANDLE_EP3_OUT +// Description : None +#define USB_BUFF_CPU_SHOULD_HANDLE_EP3_OUT_RESET _u(0x0) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP3_OUT_BITS _u(0x00000080) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP3_OUT_MSB _u(7) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP3_OUT_LSB _u(7) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP3_OUT_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_CPU_SHOULD_HANDLE_EP3_IN +// Description : None +#define USB_BUFF_CPU_SHOULD_HANDLE_EP3_IN_RESET _u(0x0) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP3_IN_BITS _u(0x00000040) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP3_IN_MSB _u(6) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP3_IN_LSB _u(6) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP3_IN_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_CPU_SHOULD_HANDLE_EP2_OUT +// Description : None +#define USB_BUFF_CPU_SHOULD_HANDLE_EP2_OUT_RESET _u(0x0) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP2_OUT_BITS _u(0x00000020) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP2_OUT_MSB _u(5) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP2_OUT_LSB _u(5) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP2_OUT_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_CPU_SHOULD_HANDLE_EP2_IN +// Description : None +#define USB_BUFF_CPU_SHOULD_HANDLE_EP2_IN_RESET _u(0x0) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP2_IN_BITS _u(0x00000010) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP2_IN_MSB _u(4) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP2_IN_LSB _u(4) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP2_IN_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_CPU_SHOULD_HANDLE_EP1_OUT +// Description : None +#define USB_BUFF_CPU_SHOULD_HANDLE_EP1_OUT_RESET _u(0x0) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP1_OUT_BITS _u(0x00000008) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP1_OUT_MSB _u(3) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP1_OUT_LSB _u(3) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP1_OUT_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_CPU_SHOULD_HANDLE_EP1_IN +// Description : None +#define USB_BUFF_CPU_SHOULD_HANDLE_EP1_IN_RESET _u(0x0) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP1_IN_BITS _u(0x00000004) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP1_IN_MSB _u(2) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP1_IN_LSB _u(2) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP1_IN_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_CPU_SHOULD_HANDLE_EP0_OUT +// Description : None +#define USB_BUFF_CPU_SHOULD_HANDLE_EP0_OUT_RESET _u(0x0) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP0_OUT_BITS _u(0x00000002) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP0_OUT_MSB _u(1) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP0_OUT_LSB _u(1) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP0_OUT_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_BUFF_CPU_SHOULD_HANDLE_EP0_IN +// Description : None +#define USB_BUFF_CPU_SHOULD_HANDLE_EP0_IN_RESET _u(0x0) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP0_IN_BITS _u(0x00000001) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP0_IN_MSB _u(0) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP0_IN_LSB _u(0) +#define USB_BUFF_CPU_SHOULD_HANDLE_EP0_IN_ACCESS "RO" +// ============================================================================= +// Register : USB_EP_ABORT +// Description : Device only: Can be set to ignore the buffer control register +// for this endpoint in case you would like to revoke a buffer. A +// NAK will be sent for every access to the endpoint until this +// bit is cleared. A corresponding bit in `EP_ABORT_DONE` is set +// when it is safe to modify the buffer control register. +#define USB_EP_ABORT_OFFSET _u(0x00000060) +#define USB_EP_ABORT_BITS _u(0xffffffff) +#define USB_EP_ABORT_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_EP15_OUT +// Description : None +#define USB_EP_ABORT_EP15_OUT_RESET _u(0x0) +#define USB_EP_ABORT_EP15_OUT_BITS _u(0x80000000) +#define USB_EP_ABORT_EP15_OUT_MSB _u(31) +#define USB_EP_ABORT_EP15_OUT_LSB _u(31) +#define USB_EP_ABORT_EP15_OUT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_EP15_IN +// Description : None +#define USB_EP_ABORT_EP15_IN_RESET _u(0x0) +#define USB_EP_ABORT_EP15_IN_BITS _u(0x40000000) +#define USB_EP_ABORT_EP15_IN_MSB _u(30) +#define USB_EP_ABORT_EP15_IN_LSB _u(30) +#define USB_EP_ABORT_EP15_IN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_EP14_OUT +// Description : None +#define USB_EP_ABORT_EP14_OUT_RESET _u(0x0) +#define USB_EP_ABORT_EP14_OUT_BITS _u(0x20000000) +#define USB_EP_ABORT_EP14_OUT_MSB _u(29) +#define USB_EP_ABORT_EP14_OUT_LSB _u(29) +#define USB_EP_ABORT_EP14_OUT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_EP14_IN +// Description : None +#define USB_EP_ABORT_EP14_IN_RESET _u(0x0) +#define USB_EP_ABORT_EP14_IN_BITS _u(0x10000000) +#define USB_EP_ABORT_EP14_IN_MSB _u(28) +#define USB_EP_ABORT_EP14_IN_LSB _u(28) +#define USB_EP_ABORT_EP14_IN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_EP13_OUT +// Description : None +#define USB_EP_ABORT_EP13_OUT_RESET _u(0x0) +#define USB_EP_ABORT_EP13_OUT_BITS _u(0x08000000) +#define USB_EP_ABORT_EP13_OUT_MSB _u(27) +#define USB_EP_ABORT_EP13_OUT_LSB _u(27) +#define USB_EP_ABORT_EP13_OUT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_EP13_IN +// Description : None +#define USB_EP_ABORT_EP13_IN_RESET _u(0x0) +#define USB_EP_ABORT_EP13_IN_BITS _u(0x04000000) +#define USB_EP_ABORT_EP13_IN_MSB _u(26) +#define USB_EP_ABORT_EP13_IN_LSB _u(26) +#define USB_EP_ABORT_EP13_IN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_EP12_OUT +// Description : None +#define USB_EP_ABORT_EP12_OUT_RESET _u(0x0) +#define USB_EP_ABORT_EP12_OUT_BITS _u(0x02000000) +#define USB_EP_ABORT_EP12_OUT_MSB _u(25) +#define USB_EP_ABORT_EP12_OUT_LSB _u(25) +#define USB_EP_ABORT_EP12_OUT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_EP12_IN +// Description : None +#define USB_EP_ABORT_EP12_IN_RESET _u(0x0) +#define USB_EP_ABORT_EP12_IN_BITS _u(0x01000000) +#define USB_EP_ABORT_EP12_IN_MSB _u(24) +#define USB_EP_ABORT_EP12_IN_LSB _u(24) +#define USB_EP_ABORT_EP12_IN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_EP11_OUT +// Description : None +#define USB_EP_ABORT_EP11_OUT_RESET _u(0x0) +#define USB_EP_ABORT_EP11_OUT_BITS _u(0x00800000) +#define USB_EP_ABORT_EP11_OUT_MSB _u(23) +#define USB_EP_ABORT_EP11_OUT_LSB _u(23) +#define USB_EP_ABORT_EP11_OUT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_EP11_IN +// Description : None +#define USB_EP_ABORT_EP11_IN_RESET _u(0x0) +#define USB_EP_ABORT_EP11_IN_BITS _u(0x00400000) +#define USB_EP_ABORT_EP11_IN_MSB _u(22) +#define USB_EP_ABORT_EP11_IN_LSB _u(22) +#define USB_EP_ABORT_EP11_IN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_EP10_OUT +// Description : None +#define USB_EP_ABORT_EP10_OUT_RESET _u(0x0) +#define USB_EP_ABORT_EP10_OUT_BITS _u(0x00200000) +#define USB_EP_ABORT_EP10_OUT_MSB _u(21) +#define USB_EP_ABORT_EP10_OUT_LSB _u(21) +#define USB_EP_ABORT_EP10_OUT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_EP10_IN +// Description : None +#define USB_EP_ABORT_EP10_IN_RESET _u(0x0) +#define USB_EP_ABORT_EP10_IN_BITS _u(0x00100000) +#define USB_EP_ABORT_EP10_IN_MSB _u(20) +#define USB_EP_ABORT_EP10_IN_LSB _u(20) +#define USB_EP_ABORT_EP10_IN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_EP9_OUT +// Description : None +#define USB_EP_ABORT_EP9_OUT_RESET _u(0x0) +#define USB_EP_ABORT_EP9_OUT_BITS _u(0x00080000) +#define USB_EP_ABORT_EP9_OUT_MSB _u(19) +#define USB_EP_ABORT_EP9_OUT_LSB _u(19) +#define USB_EP_ABORT_EP9_OUT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_EP9_IN +// Description : None +#define USB_EP_ABORT_EP9_IN_RESET _u(0x0) +#define USB_EP_ABORT_EP9_IN_BITS _u(0x00040000) +#define USB_EP_ABORT_EP9_IN_MSB _u(18) +#define USB_EP_ABORT_EP9_IN_LSB _u(18) +#define USB_EP_ABORT_EP9_IN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_EP8_OUT +// Description : None +#define USB_EP_ABORT_EP8_OUT_RESET _u(0x0) +#define USB_EP_ABORT_EP8_OUT_BITS _u(0x00020000) +#define USB_EP_ABORT_EP8_OUT_MSB _u(17) +#define USB_EP_ABORT_EP8_OUT_LSB _u(17) +#define USB_EP_ABORT_EP8_OUT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_EP8_IN +// Description : None +#define USB_EP_ABORT_EP8_IN_RESET _u(0x0) +#define USB_EP_ABORT_EP8_IN_BITS _u(0x00010000) +#define USB_EP_ABORT_EP8_IN_MSB _u(16) +#define USB_EP_ABORT_EP8_IN_LSB _u(16) +#define USB_EP_ABORT_EP8_IN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_EP7_OUT +// Description : None +#define USB_EP_ABORT_EP7_OUT_RESET _u(0x0) +#define USB_EP_ABORT_EP7_OUT_BITS _u(0x00008000) +#define USB_EP_ABORT_EP7_OUT_MSB _u(15) +#define USB_EP_ABORT_EP7_OUT_LSB _u(15) +#define USB_EP_ABORT_EP7_OUT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_EP7_IN +// Description : None +#define USB_EP_ABORT_EP7_IN_RESET _u(0x0) +#define USB_EP_ABORT_EP7_IN_BITS _u(0x00004000) +#define USB_EP_ABORT_EP7_IN_MSB _u(14) +#define USB_EP_ABORT_EP7_IN_LSB _u(14) +#define USB_EP_ABORT_EP7_IN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_EP6_OUT +// Description : None +#define USB_EP_ABORT_EP6_OUT_RESET _u(0x0) +#define USB_EP_ABORT_EP6_OUT_BITS _u(0x00002000) +#define USB_EP_ABORT_EP6_OUT_MSB _u(13) +#define USB_EP_ABORT_EP6_OUT_LSB _u(13) +#define USB_EP_ABORT_EP6_OUT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_EP6_IN +// Description : None +#define USB_EP_ABORT_EP6_IN_RESET _u(0x0) +#define USB_EP_ABORT_EP6_IN_BITS _u(0x00001000) +#define USB_EP_ABORT_EP6_IN_MSB _u(12) +#define USB_EP_ABORT_EP6_IN_LSB _u(12) +#define USB_EP_ABORT_EP6_IN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_EP5_OUT +// Description : None +#define USB_EP_ABORT_EP5_OUT_RESET _u(0x0) +#define USB_EP_ABORT_EP5_OUT_BITS _u(0x00000800) +#define USB_EP_ABORT_EP5_OUT_MSB _u(11) +#define USB_EP_ABORT_EP5_OUT_LSB _u(11) +#define USB_EP_ABORT_EP5_OUT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_EP5_IN +// Description : None +#define USB_EP_ABORT_EP5_IN_RESET _u(0x0) +#define USB_EP_ABORT_EP5_IN_BITS _u(0x00000400) +#define USB_EP_ABORT_EP5_IN_MSB _u(10) +#define USB_EP_ABORT_EP5_IN_LSB _u(10) +#define USB_EP_ABORT_EP5_IN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_EP4_OUT +// Description : None +#define USB_EP_ABORT_EP4_OUT_RESET _u(0x0) +#define USB_EP_ABORT_EP4_OUT_BITS _u(0x00000200) +#define USB_EP_ABORT_EP4_OUT_MSB _u(9) +#define USB_EP_ABORT_EP4_OUT_LSB _u(9) +#define USB_EP_ABORT_EP4_OUT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_EP4_IN +// Description : None +#define USB_EP_ABORT_EP4_IN_RESET _u(0x0) +#define USB_EP_ABORT_EP4_IN_BITS _u(0x00000100) +#define USB_EP_ABORT_EP4_IN_MSB _u(8) +#define USB_EP_ABORT_EP4_IN_LSB _u(8) +#define USB_EP_ABORT_EP4_IN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_EP3_OUT +// Description : None +#define USB_EP_ABORT_EP3_OUT_RESET _u(0x0) +#define USB_EP_ABORT_EP3_OUT_BITS _u(0x00000080) +#define USB_EP_ABORT_EP3_OUT_MSB _u(7) +#define USB_EP_ABORT_EP3_OUT_LSB _u(7) +#define USB_EP_ABORT_EP3_OUT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_EP3_IN +// Description : None +#define USB_EP_ABORT_EP3_IN_RESET _u(0x0) +#define USB_EP_ABORT_EP3_IN_BITS _u(0x00000040) +#define USB_EP_ABORT_EP3_IN_MSB _u(6) +#define USB_EP_ABORT_EP3_IN_LSB _u(6) +#define USB_EP_ABORT_EP3_IN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_EP2_OUT +// Description : None +#define USB_EP_ABORT_EP2_OUT_RESET _u(0x0) +#define USB_EP_ABORT_EP2_OUT_BITS _u(0x00000020) +#define USB_EP_ABORT_EP2_OUT_MSB _u(5) +#define USB_EP_ABORT_EP2_OUT_LSB _u(5) +#define USB_EP_ABORT_EP2_OUT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_EP2_IN +// Description : None +#define USB_EP_ABORT_EP2_IN_RESET _u(0x0) +#define USB_EP_ABORT_EP2_IN_BITS _u(0x00000010) +#define USB_EP_ABORT_EP2_IN_MSB _u(4) +#define USB_EP_ABORT_EP2_IN_LSB _u(4) +#define USB_EP_ABORT_EP2_IN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_EP1_OUT +// Description : None +#define USB_EP_ABORT_EP1_OUT_RESET _u(0x0) +#define USB_EP_ABORT_EP1_OUT_BITS _u(0x00000008) +#define USB_EP_ABORT_EP1_OUT_MSB _u(3) +#define USB_EP_ABORT_EP1_OUT_LSB _u(3) +#define USB_EP_ABORT_EP1_OUT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_EP1_IN +// Description : None +#define USB_EP_ABORT_EP1_IN_RESET _u(0x0) +#define USB_EP_ABORT_EP1_IN_BITS _u(0x00000004) +#define USB_EP_ABORT_EP1_IN_MSB _u(2) +#define USB_EP_ABORT_EP1_IN_LSB _u(2) +#define USB_EP_ABORT_EP1_IN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_EP0_OUT +// Description : None +#define USB_EP_ABORT_EP0_OUT_RESET _u(0x0) +#define USB_EP_ABORT_EP0_OUT_BITS _u(0x00000002) +#define USB_EP_ABORT_EP0_OUT_MSB _u(1) +#define USB_EP_ABORT_EP0_OUT_LSB _u(1) +#define USB_EP_ABORT_EP0_OUT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_EP0_IN +// Description : None +#define USB_EP_ABORT_EP0_IN_RESET _u(0x0) +#define USB_EP_ABORT_EP0_IN_BITS _u(0x00000001) +#define USB_EP_ABORT_EP0_IN_MSB _u(0) +#define USB_EP_ABORT_EP0_IN_LSB _u(0) +#define USB_EP_ABORT_EP0_IN_ACCESS "RW" +// ============================================================================= +// Register : USB_EP_ABORT_DONE +// Description : Device only: Used in conjunction with `EP_ABORT`. Set once an +// endpoint is idle so the programmer knows it is safe to modify +// the buffer control register. +#define USB_EP_ABORT_DONE_OFFSET _u(0x00000064) +#define USB_EP_ABORT_DONE_BITS _u(0xffffffff) +#define USB_EP_ABORT_DONE_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_DONE_EP15_OUT +// Description : None +#define USB_EP_ABORT_DONE_EP15_OUT_RESET _u(0x0) +#define USB_EP_ABORT_DONE_EP15_OUT_BITS _u(0x80000000) +#define USB_EP_ABORT_DONE_EP15_OUT_MSB _u(31) +#define USB_EP_ABORT_DONE_EP15_OUT_LSB _u(31) +#define USB_EP_ABORT_DONE_EP15_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_DONE_EP15_IN +// Description : None +#define USB_EP_ABORT_DONE_EP15_IN_RESET _u(0x0) +#define USB_EP_ABORT_DONE_EP15_IN_BITS _u(0x40000000) +#define USB_EP_ABORT_DONE_EP15_IN_MSB _u(30) +#define USB_EP_ABORT_DONE_EP15_IN_LSB _u(30) +#define USB_EP_ABORT_DONE_EP15_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_DONE_EP14_OUT +// Description : None +#define USB_EP_ABORT_DONE_EP14_OUT_RESET _u(0x0) +#define USB_EP_ABORT_DONE_EP14_OUT_BITS _u(0x20000000) +#define USB_EP_ABORT_DONE_EP14_OUT_MSB _u(29) +#define USB_EP_ABORT_DONE_EP14_OUT_LSB _u(29) +#define USB_EP_ABORT_DONE_EP14_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_DONE_EP14_IN +// Description : None +#define USB_EP_ABORT_DONE_EP14_IN_RESET _u(0x0) +#define USB_EP_ABORT_DONE_EP14_IN_BITS _u(0x10000000) +#define USB_EP_ABORT_DONE_EP14_IN_MSB _u(28) +#define USB_EP_ABORT_DONE_EP14_IN_LSB _u(28) +#define USB_EP_ABORT_DONE_EP14_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_DONE_EP13_OUT +// Description : None +#define USB_EP_ABORT_DONE_EP13_OUT_RESET _u(0x0) +#define USB_EP_ABORT_DONE_EP13_OUT_BITS _u(0x08000000) +#define USB_EP_ABORT_DONE_EP13_OUT_MSB _u(27) +#define USB_EP_ABORT_DONE_EP13_OUT_LSB _u(27) +#define USB_EP_ABORT_DONE_EP13_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_DONE_EP13_IN +// Description : None +#define USB_EP_ABORT_DONE_EP13_IN_RESET _u(0x0) +#define USB_EP_ABORT_DONE_EP13_IN_BITS _u(0x04000000) +#define USB_EP_ABORT_DONE_EP13_IN_MSB _u(26) +#define USB_EP_ABORT_DONE_EP13_IN_LSB _u(26) +#define USB_EP_ABORT_DONE_EP13_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_DONE_EP12_OUT +// Description : None +#define USB_EP_ABORT_DONE_EP12_OUT_RESET _u(0x0) +#define USB_EP_ABORT_DONE_EP12_OUT_BITS _u(0x02000000) +#define USB_EP_ABORT_DONE_EP12_OUT_MSB _u(25) +#define USB_EP_ABORT_DONE_EP12_OUT_LSB _u(25) +#define USB_EP_ABORT_DONE_EP12_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_DONE_EP12_IN +// Description : None +#define USB_EP_ABORT_DONE_EP12_IN_RESET _u(0x0) +#define USB_EP_ABORT_DONE_EP12_IN_BITS _u(0x01000000) +#define USB_EP_ABORT_DONE_EP12_IN_MSB _u(24) +#define USB_EP_ABORT_DONE_EP12_IN_LSB _u(24) +#define USB_EP_ABORT_DONE_EP12_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_DONE_EP11_OUT +// Description : None +#define USB_EP_ABORT_DONE_EP11_OUT_RESET _u(0x0) +#define USB_EP_ABORT_DONE_EP11_OUT_BITS _u(0x00800000) +#define USB_EP_ABORT_DONE_EP11_OUT_MSB _u(23) +#define USB_EP_ABORT_DONE_EP11_OUT_LSB _u(23) +#define USB_EP_ABORT_DONE_EP11_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_DONE_EP11_IN +// Description : None +#define USB_EP_ABORT_DONE_EP11_IN_RESET _u(0x0) +#define USB_EP_ABORT_DONE_EP11_IN_BITS _u(0x00400000) +#define USB_EP_ABORT_DONE_EP11_IN_MSB _u(22) +#define USB_EP_ABORT_DONE_EP11_IN_LSB _u(22) +#define USB_EP_ABORT_DONE_EP11_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_DONE_EP10_OUT +// Description : None +#define USB_EP_ABORT_DONE_EP10_OUT_RESET _u(0x0) +#define USB_EP_ABORT_DONE_EP10_OUT_BITS _u(0x00200000) +#define USB_EP_ABORT_DONE_EP10_OUT_MSB _u(21) +#define USB_EP_ABORT_DONE_EP10_OUT_LSB _u(21) +#define USB_EP_ABORT_DONE_EP10_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_DONE_EP10_IN +// Description : None +#define USB_EP_ABORT_DONE_EP10_IN_RESET _u(0x0) +#define USB_EP_ABORT_DONE_EP10_IN_BITS _u(0x00100000) +#define USB_EP_ABORT_DONE_EP10_IN_MSB _u(20) +#define USB_EP_ABORT_DONE_EP10_IN_LSB _u(20) +#define USB_EP_ABORT_DONE_EP10_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_DONE_EP9_OUT +// Description : None +#define USB_EP_ABORT_DONE_EP9_OUT_RESET _u(0x0) +#define USB_EP_ABORT_DONE_EP9_OUT_BITS _u(0x00080000) +#define USB_EP_ABORT_DONE_EP9_OUT_MSB _u(19) +#define USB_EP_ABORT_DONE_EP9_OUT_LSB _u(19) +#define USB_EP_ABORT_DONE_EP9_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_DONE_EP9_IN +// Description : None +#define USB_EP_ABORT_DONE_EP9_IN_RESET _u(0x0) +#define USB_EP_ABORT_DONE_EP9_IN_BITS _u(0x00040000) +#define USB_EP_ABORT_DONE_EP9_IN_MSB _u(18) +#define USB_EP_ABORT_DONE_EP9_IN_LSB _u(18) +#define USB_EP_ABORT_DONE_EP9_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_DONE_EP8_OUT +// Description : None +#define USB_EP_ABORT_DONE_EP8_OUT_RESET _u(0x0) +#define USB_EP_ABORT_DONE_EP8_OUT_BITS _u(0x00020000) +#define USB_EP_ABORT_DONE_EP8_OUT_MSB _u(17) +#define USB_EP_ABORT_DONE_EP8_OUT_LSB _u(17) +#define USB_EP_ABORT_DONE_EP8_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_DONE_EP8_IN +// Description : None +#define USB_EP_ABORT_DONE_EP8_IN_RESET _u(0x0) +#define USB_EP_ABORT_DONE_EP8_IN_BITS _u(0x00010000) +#define USB_EP_ABORT_DONE_EP8_IN_MSB _u(16) +#define USB_EP_ABORT_DONE_EP8_IN_LSB _u(16) +#define USB_EP_ABORT_DONE_EP8_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_DONE_EP7_OUT +// Description : None +#define USB_EP_ABORT_DONE_EP7_OUT_RESET _u(0x0) +#define USB_EP_ABORT_DONE_EP7_OUT_BITS _u(0x00008000) +#define USB_EP_ABORT_DONE_EP7_OUT_MSB _u(15) +#define USB_EP_ABORT_DONE_EP7_OUT_LSB _u(15) +#define USB_EP_ABORT_DONE_EP7_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_DONE_EP7_IN +// Description : None +#define USB_EP_ABORT_DONE_EP7_IN_RESET _u(0x0) +#define USB_EP_ABORT_DONE_EP7_IN_BITS _u(0x00004000) +#define USB_EP_ABORT_DONE_EP7_IN_MSB _u(14) +#define USB_EP_ABORT_DONE_EP7_IN_LSB _u(14) +#define USB_EP_ABORT_DONE_EP7_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_DONE_EP6_OUT +// Description : None +#define USB_EP_ABORT_DONE_EP6_OUT_RESET _u(0x0) +#define USB_EP_ABORT_DONE_EP6_OUT_BITS _u(0x00002000) +#define USB_EP_ABORT_DONE_EP6_OUT_MSB _u(13) +#define USB_EP_ABORT_DONE_EP6_OUT_LSB _u(13) +#define USB_EP_ABORT_DONE_EP6_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_DONE_EP6_IN +// Description : None +#define USB_EP_ABORT_DONE_EP6_IN_RESET _u(0x0) +#define USB_EP_ABORT_DONE_EP6_IN_BITS _u(0x00001000) +#define USB_EP_ABORT_DONE_EP6_IN_MSB _u(12) +#define USB_EP_ABORT_DONE_EP6_IN_LSB _u(12) +#define USB_EP_ABORT_DONE_EP6_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_DONE_EP5_OUT +// Description : None +#define USB_EP_ABORT_DONE_EP5_OUT_RESET _u(0x0) +#define USB_EP_ABORT_DONE_EP5_OUT_BITS _u(0x00000800) +#define USB_EP_ABORT_DONE_EP5_OUT_MSB _u(11) +#define USB_EP_ABORT_DONE_EP5_OUT_LSB _u(11) +#define USB_EP_ABORT_DONE_EP5_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_DONE_EP5_IN +// Description : None +#define USB_EP_ABORT_DONE_EP5_IN_RESET _u(0x0) +#define USB_EP_ABORT_DONE_EP5_IN_BITS _u(0x00000400) +#define USB_EP_ABORT_DONE_EP5_IN_MSB _u(10) +#define USB_EP_ABORT_DONE_EP5_IN_LSB _u(10) +#define USB_EP_ABORT_DONE_EP5_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_DONE_EP4_OUT +// Description : None +#define USB_EP_ABORT_DONE_EP4_OUT_RESET _u(0x0) +#define USB_EP_ABORT_DONE_EP4_OUT_BITS _u(0x00000200) +#define USB_EP_ABORT_DONE_EP4_OUT_MSB _u(9) +#define USB_EP_ABORT_DONE_EP4_OUT_LSB _u(9) +#define USB_EP_ABORT_DONE_EP4_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_DONE_EP4_IN +// Description : None +#define USB_EP_ABORT_DONE_EP4_IN_RESET _u(0x0) +#define USB_EP_ABORT_DONE_EP4_IN_BITS _u(0x00000100) +#define USB_EP_ABORT_DONE_EP4_IN_MSB _u(8) +#define USB_EP_ABORT_DONE_EP4_IN_LSB _u(8) +#define USB_EP_ABORT_DONE_EP4_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_DONE_EP3_OUT +// Description : None +#define USB_EP_ABORT_DONE_EP3_OUT_RESET _u(0x0) +#define USB_EP_ABORT_DONE_EP3_OUT_BITS _u(0x00000080) +#define USB_EP_ABORT_DONE_EP3_OUT_MSB _u(7) +#define USB_EP_ABORT_DONE_EP3_OUT_LSB _u(7) +#define USB_EP_ABORT_DONE_EP3_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_DONE_EP3_IN +// Description : None +#define USB_EP_ABORT_DONE_EP3_IN_RESET _u(0x0) +#define USB_EP_ABORT_DONE_EP3_IN_BITS _u(0x00000040) +#define USB_EP_ABORT_DONE_EP3_IN_MSB _u(6) +#define USB_EP_ABORT_DONE_EP3_IN_LSB _u(6) +#define USB_EP_ABORT_DONE_EP3_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_DONE_EP2_OUT +// Description : None +#define USB_EP_ABORT_DONE_EP2_OUT_RESET _u(0x0) +#define USB_EP_ABORT_DONE_EP2_OUT_BITS _u(0x00000020) +#define USB_EP_ABORT_DONE_EP2_OUT_MSB _u(5) +#define USB_EP_ABORT_DONE_EP2_OUT_LSB _u(5) +#define USB_EP_ABORT_DONE_EP2_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_DONE_EP2_IN +// Description : None +#define USB_EP_ABORT_DONE_EP2_IN_RESET _u(0x0) +#define USB_EP_ABORT_DONE_EP2_IN_BITS _u(0x00000010) +#define USB_EP_ABORT_DONE_EP2_IN_MSB _u(4) +#define USB_EP_ABORT_DONE_EP2_IN_LSB _u(4) +#define USB_EP_ABORT_DONE_EP2_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_DONE_EP1_OUT +// Description : None +#define USB_EP_ABORT_DONE_EP1_OUT_RESET _u(0x0) +#define USB_EP_ABORT_DONE_EP1_OUT_BITS _u(0x00000008) +#define USB_EP_ABORT_DONE_EP1_OUT_MSB _u(3) +#define USB_EP_ABORT_DONE_EP1_OUT_LSB _u(3) +#define USB_EP_ABORT_DONE_EP1_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_DONE_EP1_IN +// Description : None +#define USB_EP_ABORT_DONE_EP1_IN_RESET _u(0x0) +#define USB_EP_ABORT_DONE_EP1_IN_BITS _u(0x00000004) +#define USB_EP_ABORT_DONE_EP1_IN_MSB _u(2) +#define USB_EP_ABORT_DONE_EP1_IN_LSB _u(2) +#define USB_EP_ABORT_DONE_EP1_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_DONE_EP0_OUT +// Description : None +#define USB_EP_ABORT_DONE_EP0_OUT_RESET _u(0x0) +#define USB_EP_ABORT_DONE_EP0_OUT_BITS _u(0x00000002) +#define USB_EP_ABORT_DONE_EP0_OUT_MSB _u(1) +#define USB_EP_ABORT_DONE_EP0_OUT_LSB _u(1) +#define USB_EP_ABORT_DONE_EP0_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_ABORT_DONE_EP0_IN +// Description : None +#define USB_EP_ABORT_DONE_EP0_IN_RESET _u(0x0) +#define USB_EP_ABORT_DONE_EP0_IN_BITS _u(0x00000001) +#define USB_EP_ABORT_DONE_EP0_IN_MSB _u(0) +#define USB_EP_ABORT_DONE_EP0_IN_LSB _u(0) +#define USB_EP_ABORT_DONE_EP0_IN_ACCESS "WC" +// ============================================================================= +// Register : USB_EP_STALL_ARM +// Description : Device: this bit must be set in conjunction with the `STALL` +// bit in the buffer control register to send a STALL on EP0. The +// device controller clears these bits when a SETUP packet is +// received because the USB spec requires that a STALL condition +// is cleared when a SETUP packet is received. +#define USB_EP_STALL_ARM_OFFSET _u(0x00000068) +#define USB_EP_STALL_ARM_BITS _u(0x00000003) +#define USB_EP_STALL_ARM_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_EP_STALL_ARM_EP0_OUT +// Description : None +#define USB_EP_STALL_ARM_EP0_OUT_RESET _u(0x0) +#define USB_EP_STALL_ARM_EP0_OUT_BITS _u(0x00000002) +#define USB_EP_STALL_ARM_EP0_OUT_MSB _u(1) +#define USB_EP_STALL_ARM_EP0_OUT_LSB _u(1) +#define USB_EP_STALL_ARM_EP0_OUT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_EP_STALL_ARM_EP0_IN +// Description : None +#define USB_EP_STALL_ARM_EP0_IN_RESET _u(0x0) +#define USB_EP_STALL_ARM_EP0_IN_BITS _u(0x00000001) +#define USB_EP_STALL_ARM_EP0_IN_MSB _u(0) +#define USB_EP_STALL_ARM_EP0_IN_LSB _u(0) +#define USB_EP_STALL_ARM_EP0_IN_ACCESS "RW" +// ============================================================================= +// Register : USB_NAK_POLL +// Description : Used by the host controller. Sets the wait time in microseconds +// before trying again if the device replies with a NAK. +#define USB_NAK_POLL_OFFSET _u(0x0000006c) +#define USB_NAK_POLL_BITS _u(0x03ff03ff) +#define USB_NAK_POLL_RESET _u(0x00100010) +// ----------------------------------------------------------------------------- +// Field : USB_NAK_POLL_DELAY_FS +// Description : NAK polling interval for a full speed device +#define USB_NAK_POLL_DELAY_FS_RESET _u(0x010) +#define USB_NAK_POLL_DELAY_FS_BITS _u(0x03ff0000) +#define USB_NAK_POLL_DELAY_FS_MSB _u(25) +#define USB_NAK_POLL_DELAY_FS_LSB _u(16) +#define USB_NAK_POLL_DELAY_FS_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_NAK_POLL_DELAY_LS +// Description : NAK polling interval for a low speed device +#define USB_NAK_POLL_DELAY_LS_RESET _u(0x010) +#define USB_NAK_POLL_DELAY_LS_BITS _u(0x000003ff) +#define USB_NAK_POLL_DELAY_LS_MSB _u(9) +#define USB_NAK_POLL_DELAY_LS_LSB _u(0) +#define USB_NAK_POLL_DELAY_LS_ACCESS "RW" +// ============================================================================= +// Register : USB_EP_STATUS_STALL_NAK +// Description : Device: bits are set when the `IRQ_ON_NAK` or `IRQ_ON_STALL` +// bits are set. For EP0 this comes from `SIE_CTRL`. For all other +// endpoints it comes from the endpoint control register. +#define USB_EP_STATUS_STALL_NAK_OFFSET _u(0x00000070) +#define USB_EP_STATUS_STALL_NAK_BITS _u(0xffffffff) +#define USB_EP_STATUS_STALL_NAK_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_EP_STATUS_STALL_NAK_EP15_OUT +// Description : None +#define USB_EP_STATUS_STALL_NAK_EP15_OUT_RESET _u(0x0) +#define USB_EP_STATUS_STALL_NAK_EP15_OUT_BITS _u(0x80000000) +#define USB_EP_STATUS_STALL_NAK_EP15_OUT_MSB _u(31) +#define USB_EP_STATUS_STALL_NAK_EP15_OUT_LSB _u(31) +#define USB_EP_STATUS_STALL_NAK_EP15_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_STATUS_STALL_NAK_EP15_IN +// Description : None +#define USB_EP_STATUS_STALL_NAK_EP15_IN_RESET _u(0x0) +#define USB_EP_STATUS_STALL_NAK_EP15_IN_BITS _u(0x40000000) +#define USB_EP_STATUS_STALL_NAK_EP15_IN_MSB _u(30) +#define USB_EP_STATUS_STALL_NAK_EP15_IN_LSB _u(30) +#define USB_EP_STATUS_STALL_NAK_EP15_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_STATUS_STALL_NAK_EP14_OUT +// Description : None +#define USB_EP_STATUS_STALL_NAK_EP14_OUT_RESET _u(0x0) +#define USB_EP_STATUS_STALL_NAK_EP14_OUT_BITS _u(0x20000000) +#define USB_EP_STATUS_STALL_NAK_EP14_OUT_MSB _u(29) +#define USB_EP_STATUS_STALL_NAK_EP14_OUT_LSB _u(29) +#define USB_EP_STATUS_STALL_NAK_EP14_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_STATUS_STALL_NAK_EP14_IN +// Description : None +#define USB_EP_STATUS_STALL_NAK_EP14_IN_RESET _u(0x0) +#define USB_EP_STATUS_STALL_NAK_EP14_IN_BITS _u(0x10000000) +#define USB_EP_STATUS_STALL_NAK_EP14_IN_MSB _u(28) +#define USB_EP_STATUS_STALL_NAK_EP14_IN_LSB _u(28) +#define USB_EP_STATUS_STALL_NAK_EP14_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_STATUS_STALL_NAK_EP13_OUT +// Description : None +#define USB_EP_STATUS_STALL_NAK_EP13_OUT_RESET _u(0x0) +#define USB_EP_STATUS_STALL_NAK_EP13_OUT_BITS _u(0x08000000) +#define USB_EP_STATUS_STALL_NAK_EP13_OUT_MSB _u(27) +#define USB_EP_STATUS_STALL_NAK_EP13_OUT_LSB _u(27) +#define USB_EP_STATUS_STALL_NAK_EP13_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_STATUS_STALL_NAK_EP13_IN +// Description : None +#define USB_EP_STATUS_STALL_NAK_EP13_IN_RESET _u(0x0) +#define USB_EP_STATUS_STALL_NAK_EP13_IN_BITS _u(0x04000000) +#define USB_EP_STATUS_STALL_NAK_EP13_IN_MSB _u(26) +#define USB_EP_STATUS_STALL_NAK_EP13_IN_LSB _u(26) +#define USB_EP_STATUS_STALL_NAK_EP13_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_STATUS_STALL_NAK_EP12_OUT +// Description : None +#define USB_EP_STATUS_STALL_NAK_EP12_OUT_RESET _u(0x0) +#define USB_EP_STATUS_STALL_NAK_EP12_OUT_BITS _u(0x02000000) +#define USB_EP_STATUS_STALL_NAK_EP12_OUT_MSB _u(25) +#define USB_EP_STATUS_STALL_NAK_EP12_OUT_LSB _u(25) +#define USB_EP_STATUS_STALL_NAK_EP12_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_STATUS_STALL_NAK_EP12_IN +// Description : None +#define USB_EP_STATUS_STALL_NAK_EP12_IN_RESET _u(0x0) +#define USB_EP_STATUS_STALL_NAK_EP12_IN_BITS _u(0x01000000) +#define USB_EP_STATUS_STALL_NAK_EP12_IN_MSB _u(24) +#define USB_EP_STATUS_STALL_NAK_EP12_IN_LSB _u(24) +#define USB_EP_STATUS_STALL_NAK_EP12_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_STATUS_STALL_NAK_EP11_OUT +// Description : None +#define USB_EP_STATUS_STALL_NAK_EP11_OUT_RESET _u(0x0) +#define USB_EP_STATUS_STALL_NAK_EP11_OUT_BITS _u(0x00800000) +#define USB_EP_STATUS_STALL_NAK_EP11_OUT_MSB _u(23) +#define USB_EP_STATUS_STALL_NAK_EP11_OUT_LSB _u(23) +#define USB_EP_STATUS_STALL_NAK_EP11_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_STATUS_STALL_NAK_EP11_IN +// Description : None +#define USB_EP_STATUS_STALL_NAK_EP11_IN_RESET _u(0x0) +#define USB_EP_STATUS_STALL_NAK_EP11_IN_BITS _u(0x00400000) +#define USB_EP_STATUS_STALL_NAK_EP11_IN_MSB _u(22) +#define USB_EP_STATUS_STALL_NAK_EP11_IN_LSB _u(22) +#define USB_EP_STATUS_STALL_NAK_EP11_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_STATUS_STALL_NAK_EP10_OUT +// Description : None +#define USB_EP_STATUS_STALL_NAK_EP10_OUT_RESET _u(0x0) +#define USB_EP_STATUS_STALL_NAK_EP10_OUT_BITS _u(0x00200000) +#define USB_EP_STATUS_STALL_NAK_EP10_OUT_MSB _u(21) +#define USB_EP_STATUS_STALL_NAK_EP10_OUT_LSB _u(21) +#define USB_EP_STATUS_STALL_NAK_EP10_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_STATUS_STALL_NAK_EP10_IN +// Description : None +#define USB_EP_STATUS_STALL_NAK_EP10_IN_RESET _u(0x0) +#define USB_EP_STATUS_STALL_NAK_EP10_IN_BITS _u(0x00100000) +#define USB_EP_STATUS_STALL_NAK_EP10_IN_MSB _u(20) +#define USB_EP_STATUS_STALL_NAK_EP10_IN_LSB _u(20) +#define USB_EP_STATUS_STALL_NAK_EP10_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_STATUS_STALL_NAK_EP9_OUT +// Description : None +#define USB_EP_STATUS_STALL_NAK_EP9_OUT_RESET _u(0x0) +#define USB_EP_STATUS_STALL_NAK_EP9_OUT_BITS _u(0x00080000) +#define USB_EP_STATUS_STALL_NAK_EP9_OUT_MSB _u(19) +#define USB_EP_STATUS_STALL_NAK_EP9_OUT_LSB _u(19) +#define USB_EP_STATUS_STALL_NAK_EP9_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_STATUS_STALL_NAK_EP9_IN +// Description : None +#define USB_EP_STATUS_STALL_NAK_EP9_IN_RESET _u(0x0) +#define USB_EP_STATUS_STALL_NAK_EP9_IN_BITS _u(0x00040000) +#define USB_EP_STATUS_STALL_NAK_EP9_IN_MSB _u(18) +#define USB_EP_STATUS_STALL_NAK_EP9_IN_LSB _u(18) +#define USB_EP_STATUS_STALL_NAK_EP9_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_STATUS_STALL_NAK_EP8_OUT +// Description : None +#define USB_EP_STATUS_STALL_NAK_EP8_OUT_RESET _u(0x0) +#define USB_EP_STATUS_STALL_NAK_EP8_OUT_BITS _u(0x00020000) +#define USB_EP_STATUS_STALL_NAK_EP8_OUT_MSB _u(17) +#define USB_EP_STATUS_STALL_NAK_EP8_OUT_LSB _u(17) +#define USB_EP_STATUS_STALL_NAK_EP8_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_STATUS_STALL_NAK_EP8_IN +// Description : None +#define USB_EP_STATUS_STALL_NAK_EP8_IN_RESET _u(0x0) +#define USB_EP_STATUS_STALL_NAK_EP8_IN_BITS _u(0x00010000) +#define USB_EP_STATUS_STALL_NAK_EP8_IN_MSB _u(16) +#define USB_EP_STATUS_STALL_NAK_EP8_IN_LSB _u(16) +#define USB_EP_STATUS_STALL_NAK_EP8_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_STATUS_STALL_NAK_EP7_OUT +// Description : None +#define USB_EP_STATUS_STALL_NAK_EP7_OUT_RESET _u(0x0) +#define USB_EP_STATUS_STALL_NAK_EP7_OUT_BITS _u(0x00008000) +#define USB_EP_STATUS_STALL_NAK_EP7_OUT_MSB _u(15) +#define USB_EP_STATUS_STALL_NAK_EP7_OUT_LSB _u(15) +#define USB_EP_STATUS_STALL_NAK_EP7_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_STATUS_STALL_NAK_EP7_IN +// Description : None +#define USB_EP_STATUS_STALL_NAK_EP7_IN_RESET _u(0x0) +#define USB_EP_STATUS_STALL_NAK_EP7_IN_BITS _u(0x00004000) +#define USB_EP_STATUS_STALL_NAK_EP7_IN_MSB _u(14) +#define USB_EP_STATUS_STALL_NAK_EP7_IN_LSB _u(14) +#define USB_EP_STATUS_STALL_NAK_EP7_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_STATUS_STALL_NAK_EP6_OUT +// Description : None +#define USB_EP_STATUS_STALL_NAK_EP6_OUT_RESET _u(0x0) +#define USB_EP_STATUS_STALL_NAK_EP6_OUT_BITS _u(0x00002000) +#define USB_EP_STATUS_STALL_NAK_EP6_OUT_MSB _u(13) +#define USB_EP_STATUS_STALL_NAK_EP6_OUT_LSB _u(13) +#define USB_EP_STATUS_STALL_NAK_EP6_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_STATUS_STALL_NAK_EP6_IN +// Description : None +#define USB_EP_STATUS_STALL_NAK_EP6_IN_RESET _u(0x0) +#define USB_EP_STATUS_STALL_NAK_EP6_IN_BITS _u(0x00001000) +#define USB_EP_STATUS_STALL_NAK_EP6_IN_MSB _u(12) +#define USB_EP_STATUS_STALL_NAK_EP6_IN_LSB _u(12) +#define USB_EP_STATUS_STALL_NAK_EP6_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_STATUS_STALL_NAK_EP5_OUT +// Description : None +#define USB_EP_STATUS_STALL_NAK_EP5_OUT_RESET _u(0x0) +#define USB_EP_STATUS_STALL_NAK_EP5_OUT_BITS _u(0x00000800) +#define USB_EP_STATUS_STALL_NAK_EP5_OUT_MSB _u(11) +#define USB_EP_STATUS_STALL_NAK_EP5_OUT_LSB _u(11) +#define USB_EP_STATUS_STALL_NAK_EP5_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_STATUS_STALL_NAK_EP5_IN +// Description : None +#define USB_EP_STATUS_STALL_NAK_EP5_IN_RESET _u(0x0) +#define USB_EP_STATUS_STALL_NAK_EP5_IN_BITS _u(0x00000400) +#define USB_EP_STATUS_STALL_NAK_EP5_IN_MSB _u(10) +#define USB_EP_STATUS_STALL_NAK_EP5_IN_LSB _u(10) +#define USB_EP_STATUS_STALL_NAK_EP5_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_STATUS_STALL_NAK_EP4_OUT +// Description : None +#define USB_EP_STATUS_STALL_NAK_EP4_OUT_RESET _u(0x0) +#define USB_EP_STATUS_STALL_NAK_EP4_OUT_BITS _u(0x00000200) +#define USB_EP_STATUS_STALL_NAK_EP4_OUT_MSB _u(9) +#define USB_EP_STATUS_STALL_NAK_EP4_OUT_LSB _u(9) +#define USB_EP_STATUS_STALL_NAK_EP4_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_STATUS_STALL_NAK_EP4_IN +// Description : None +#define USB_EP_STATUS_STALL_NAK_EP4_IN_RESET _u(0x0) +#define USB_EP_STATUS_STALL_NAK_EP4_IN_BITS _u(0x00000100) +#define USB_EP_STATUS_STALL_NAK_EP4_IN_MSB _u(8) +#define USB_EP_STATUS_STALL_NAK_EP4_IN_LSB _u(8) +#define USB_EP_STATUS_STALL_NAK_EP4_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_STATUS_STALL_NAK_EP3_OUT +// Description : None +#define USB_EP_STATUS_STALL_NAK_EP3_OUT_RESET _u(0x0) +#define USB_EP_STATUS_STALL_NAK_EP3_OUT_BITS _u(0x00000080) +#define USB_EP_STATUS_STALL_NAK_EP3_OUT_MSB _u(7) +#define USB_EP_STATUS_STALL_NAK_EP3_OUT_LSB _u(7) +#define USB_EP_STATUS_STALL_NAK_EP3_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_STATUS_STALL_NAK_EP3_IN +// Description : None +#define USB_EP_STATUS_STALL_NAK_EP3_IN_RESET _u(0x0) +#define USB_EP_STATUS_STALL_NAK_EP3_IN_BITS _u(0x00000040) +#define USB_EP_STATUS_STALL_NAK_EP3_IN_MSB _u(6) +#define USB_EP_STATUS_STALL_NAK_EP3_IN_LSB _u(6) +#define USB_EP_STATUS_STALL_NAK_EP3_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_STATUS_STALL_NAK_EP2_OUT +// Description : None +#define USB_EP_STATUS_STALL_NAK_EP2_OUT_RESET _u(0x0) +#define USB_EP_STATUS_STALL_NAK_EP2_OUT_BITS _u(0x00000020) +#define USB_EP_STATUS_STALL_NAK_EP2_OUT_MSB _u(5) +#define USB_EP_STATUS_STALL_NAK_EP2_OUT_LSB _u(5) +#define USB_EP_STATUS_STALL_NAK_EP2_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_STATUS_STALL_NAK_EP2_IN +// Description : None +#define USB_EP_STATUS_STALL_NAK_EP2_IN_RESET _u(0x0) +#define USB_EP_STATUS_STALL_NAK_EP2_IN_BITS _u(0x00000010) +#define USB_EP_STATUS_STALL_NAK_EP2_IN_MSB _u(4) +#define USB_EP_STATUS_STALL_NAK_EP2_IN_LSB _u(4) +#define USB_EP_STATUS_STALL_NAK_EP2_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_STATUS_STALL_NAK_EP1_OUT +// Description : None +#define USB_EP_STATUS_STALL_NAK_EP1_OUT_RESET _u(0x0) +#define USB_EP_STATUS_STALL_NAK_EP1_OUT_BITS _u(0x00000008) +#define USB_EP_STATUS_STALL_NAK_EP1_OUT_MSB _u(3) +#define USB_EP_STATUS_STALL_NAK_EP1_OUT_LSB _u(3) +#define USB_EP_STATUS_STALL_NAK_EP1_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_STATUS_STALL_NAK_EP1_IN +// Description : None +#define USB_EP_STATUS_STALL_NAK_EP1_IN_RESET _u(0x0) +#define USB_EP_STATUS_STALL_NAK_EP1_IN_BITS _u(0x00000004) +#define USB_EP_STATUS_STALL_NAK_EP1_IN_MSB _u(2) +#define USB_EP_STATUS_STALL_NAK_EP1_IN_LSB _u(2) +#define USB_EP_STATUS_STALL_NAK_EP1_IN_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_STATUS_STALL_NAK_EP0_OUT +// Description : None +#define USB_EP_STATUS_STALL_NAK_EP0_OUT_RESET _u(0x0) +#define USB_EP_STATUS_STALL_NAK_EP0_OUT_BITS _u(0x00000002) +#define USB_EP_STATUS_STALL_NAK_EP0_OUT_MSB _u(1) +#define USB_EP_STATUS_STALL_NAK_EP0_OUT_LSB _u(1) +#define USB_EP_STATUS_STALL_NAK_EP0_OUT_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : USB_EP_STATUS_STALL_NAK_EP0_IN +// Description : None +#define USB_EP_STATUS_STALL_NAK_EP0_IN_RESET _u(0x0) +#define USB_EP_STATUS_STALL_NAK_EP0_IN_BITS _u(0x00000001) +#define USB_EP_STATUS_STALL_NAK_EP0_IN_MSB _u(0) +#define USB_EP_STATUS_STALL_NAK_EP0_IN_LSB _u(0) +#define USB_EP_STATUS_STALL_NAK_EP0_IN_ACCESS "WC" +// ============================================================================= +// Register : USB_USB_MUXING +// Description : Where to connect the USB controller. Should be to_phy by +// default. +#define USB_USB_MUXING_OFFSET _u(0x00000074) +#define USB_USB_MUXING_BITS _u(0x0000000f) +#define USB_USB_MUXING_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_USB_MUXING_SOFTCON +// Description : None +#define USB_USB_MUXING_SOFTCON_RESET _u(0x0) +#define USB_USB_MUXING_SOFTCON_BITS _u(0x00000008) +#define USB_USB_MUXING_SOFTCON_MSB _u(3) +#define USB_USB_MUXING_SOFTCON_LSB _u(3) +#define USB_USB_MUXING_SOFTCON_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_USB_MUXING_TO_DIGITAL_PAD +// Description : None +#define USB_USB_MUXING_TO_DIGITAL_PAD_RESET _u(0x0) +#define USB_USB_MUXING_TO_DIGITAL_PAD_BITS _u(0x00000004) +#define USB_USB_MUXING_TO_DIGITAL_PAD_MSB _u(2) +#define USB_USB_MUXING_TO_DIGITAL_PAD_LSB _u(2) +#define USB_USB_MUXING_TO_DIGITAL_PAD_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_USB_MUXING_TO_EXTPHY +// Description : None +#define USB_USB_MUXING_TO_EXTPHY_RESET _u(0x0) +#define USB_USB_MUXING_TO_EXTPHY_BITS _u(0x00000002) +#define USB_USB_MUXING_TO_EXTPHY_MSB _u(1) +#define USB_USB_MUXING_TO_EXTPHY_LSB _u(1) +#define USB_USB_MUXING_TO_EXTPHY_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_USB_MUXING_TO_PHY +// Description : None +#define USB_USB_MUXING_TO_PHY_RESET _u(0x0) +#define USB_USB_MUXING_TO_PHY_BITS _u(0x00000001) +#define USB_USB_MUXING_TO_PHY_MSB _u(0) +#define USB_USB_MUXING_TO_PHY_LSB _u(0) +#define USB_USB_MUXING_TO_PHY_ACCESS "RW" +// ============================================================================= +// Register : USB_USB_PWR +// Description : Overrides for the power signals in the event that the VBUS +// signals are not hooked up to GPIO. Set the value of the +// override and then the override enable to switch over to the +// override value. +#define USB_USB_PWR_OFFSET _u(0x00000078) +#define USB_USB_PWR_BITS _u(0x0000003f) +#define USB_USB_PWR_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_USB_PWR_OVERCURR_DETECT_EN +// Description : None +#define USB_USB_PWR_OVERCURR_DETECT_EN_RESET _u(0x0) +#define USB_USB_PWR_OVERCURR_DETECT_EN_BITS _u(0x00000020) +#define USB_USB_PWR_OVERCURR_DETECT_EN_MSB _u(5) +#define USB_USB_PWR_OVERCURR_DETECT_EN_LSB _u(5) +#define USB_USB_PWR_OVERCURR_DETECT_EN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_USB_PWR_OVERCURR_DETECT +// Description : None +#define USB_USB_PWR_OVERCURR_DETECT_RESET _u(0x0) +#define USB_USB_PWR_OVERCURR_DETECT_BITS _u(0x00000010) +#define USB_USB_PWR_OVERCURR_DETECT_MSB _u(4) +#define USB_USB_PWR_OVERCURR_DETECT_LSB _u(4) +#define USB_USB_PWR_OVERCURR_DETECT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_USB_PWR_VBUS_DETECT_OVERRIDE_EN +// Description : None +#define USB_USB_PWR_VBUS_DETECT_OVERRIDE_EN_RESET _u(0x0) +#define USB_USB_PWR_VBUS_DETECT_OVERRIDE_EN_BITS _u(0x00000008) +#define USB_USB_PWR_VBUS_DETECT_OVERRIDE_EN_MSB _u(3) +#define USB_USB_PWR_VBUS_DETECT_OVERRIDE_EN_LSB _u(3) +#define USB_USB_PWR_VBUS_DETECT_OVERRIDE_EN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_USB_PWR_VBUS_DETECT +// Description : None +#define USB_USB_PWR_VBUS_DETECT_RESET _u(0x0) +#define USB_USB_PWR_VBUS_DETECT_BITS _u(0x00000004) +#define USB_USB_PWR_VBUS_DETECT_MSB _u(2) +#define USB_USB_PWR_VBUS_DETECT_LSB _u(2) +#define USB_USB_PWR_VBUS_DETECT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_USB_PWR_VBUS_EN_OVERRIDE_EN +// Description : None +#define USB_USB_PWR_VBUS_EN_OVERRIDE_EN_RESET _u(0x0) +#define USB_USB_PWR_VBUS_EN_OVERRIDE_EN_BITS _u(0x00000002) +#define USB_USB_PWR_VBUS_EN_OVERRIDE_EN_MSB _u(1) +#define USB_USB_PWR_VBUS_EN_OVERRIDE_EN_LSB _u(1) +#define USB_USB_PWR_VBUS_EN_OVERRIDE_EN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_USB_PWR_VBUS_EN +// Description : None +#define USB_USB_PWR_VBUS_EN_RESET _u(0x0) +#define USB_USB_PWR_VBUS_EN_BITS _u(0x00000001) +#define USB_USB_PWR_VBUS_EN_MSB _u(0) +#define USB_USB_PWR_VBUS_EN_LSB _u(0) +#define USB_USB_PWR_VBUS_EN_ACCESS "RW" +// ============================================================================= +// Register : USB_USBPHY_DIRECT +// Description : This register allows for direct control of the USB phy. Use in +// conjunction with usbphy_direct_override register to enable each +// override bit. +#define USB_USBPHY_DIRECT_OFFSET _u(0x0000007c) +#define USB_USBPHY_DIRECT_BITS _u(0x007fff77) +#define USB_USBPHY_DIRECT_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_USBPHY_DIRECT_DM_OVV +// Description : DM over voltage +#define USB_USBPHY_DIRECT_DM_OVV_RESET _u(0x0) +#define USB_USBPHY_DIRECT_DM_OVV_BITS _u(0x00400000) +#define USB_USBPHY_DIRECT_DM_OVV_MSB _u(22) +#define USB_USBPHY_DIRECT_DM_OVV_LSB _u(22) +#define USB_USBPHY_DIRECT_DM_OVV_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_USBPHY_DIRECT_DP_OVV +// Description : DP over voltage +#define USB_USBPHY_DIRECT_DP_OVV_RESET _u(0x0) +#define USB_USBPHY_DIRECT_DP_OVV_BITS _u(0x00200000) +#define USB_USBPHY_DIRECT_DP_OVV_MSB _u(21) +#define USB_USBPHY_DIRECT_DP_OVV_LSB _u(21) +#define USB_USBPHY_DIRECT_DP_OVV_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_USBPHY_DIRECT_DM_OVCN +// Description : DM overcurrent +#define USB_USBPHY_DIRECT_DM_OVCN_RESET _u(0x0) +#define USB_USBPHY_DIRECT_DM_OVCN_BITS _u(0x00100000) +#define USB_USBPHY_DIRECT_DM_OVCN_MSB _u(20) +#define USB_USBPHY_DIRECT_DM_OVCN_LSB _u(20) +#define USB_USBPHY_DIRECT_DM_OVCN_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_USBPHY_DIRECT_DP_OVCN +// Description : DP overcurrent +#define USB_USBPHY_DIRECT_DP_OVCN_RESET _u(0x0) +#define USB_USBPHY_DIRECT_DP_OVCN_BITS _u(0x00080000) +#define USB_USBPHY_DIRECT_DP_OVCN_MSB _u(19) +#define USB_USBPHY_DIRECT_DP_OVCN_LSB _u(19) +#define USB_USBPHY_DIRECT_DP_OVCN_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_USBPHY_DIRECT_RX_DM +// Description : DPM pin state +#define USB_USBPHY_DIRECT_RX_DM_RESET _u(0x0) +#define USB_USBPHY_DIRECT_RX_DM_BITS _u(0x00040000) +#define USB_USBPHY_DIRECT_RX_DM_MSB _u(18) +#define USB_USBPHY_DIRECT_RX_DM_LSB _u(18) +#define USB_USBPHY_DIRECT_RX_DM_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_USBPHY_DIRECT_RX_DP +// Description : DPP pin state +#define USB_USBPHY_DIRECT_RX_DP_RESET _u(0x0) +#define USB_USBPHY_DIRECT_RX_DP_BITS _u(0x00020000) +#define USB_USBPHY_DIRECT_RX_DP_MSB _u(17) +#define USB_USBPHY_DIRECT_RX_DP_LSB _u(17) +#define USB_USBPHY_DIRECT_RX_DP_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_USBPHY_DIRECT_RX_DD +// Description : Differential RX +#define USB_USBPHY_DIRECT_RX_DD_RESET _u(0x0) +#define USB_USBPHY_DIRECT_RX_DD_BITS _u(0x00010000) +#define USB_USBPHY_DIRECT_RX_DD_MSB _u(16) +#define USB_USBPHY_DIRECT_RX_DD_LSB _u(16) +#define USB_USBPHY_DIRECT_RX_DD_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_USBPHY_DIRECT_TX_DIFFMODE +// Description : TX_DIFFMODE=0: Single ended mode +// TX_DIFFMODE=1: Differential drive mode (TX_DM, TX_DM_OE +// ignored) +#define USB_USBPHY_DIRECT_TX_DIFFMODE_RESET _u(0x0) +#define USB_USBPHY_DIRECT_TX_DIFFMODE_BITS _u(0x00008000) +#define USB_USBPHY_DIRECT_TX_DIFFMODE_MSB _u(15) +#define USB_USBPHY_DIRECT_TX_DIFFMODE_LSB _u(15) +#define USB_USBPHY_DIRECT_TX_DIFFMODE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_USBPHY_DIRECT_TX_FSSLEW +// Description : TX_FSSLEW=0: Low speed slew rate +// TX_FSSLEW=1: Full speed slew rate +#define USB_USBPHY_DIRECT_TX_FSSLEW_RESET _u(0x0) +#define USB_USBPHY_DIRECT_TX_FSSLEW_BITS _u(0x00004000) +#define USB_USBPHY_DIRECT_TX_FSSLEW_MSB _u(14) +#define USB_USBPHY_DIRECT_TX_FSSLEW_LSB _u(14) +#define USB_USBPHY_DIRECT_TX_FSSLEW_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_USBPHY_DIRECT_TX_PD +// Description : TX power down override (if override enable is set). 1 = powered +// down. +#define USB_USBPHY_DIRECT_TX_PD_RESET _u(0x0) +#define USB_USBPHY_DIRECT_TX_PD_BITS _u(0x00002000) +#define USB_USBPHY_DIRECT_TX_PD_MSB _u(13) +#define USB_USBPHY_DIRECT_TX_PD_LSB _u(13) +#define USB_USBPHY_DIRECT_TX_PD_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_USBPHY_DIRECT_RX_PD +// Description : RX power down override (if override enable is set). 1 = powered +// down. +#define USB_USBPHY_DIRECT_RX_PD_RESET _u(0x0) +#define USB_USBPHY_DIRECT_RX_PD_BITS _u(0x00001000) +#define USB_USBPHY_DIRECT_RX_PD_MSB _u(12) +#define USB_USBPHY_DIRECT_RX_PD_LSB _u(12) +#define USB_USBPHY_DIRECT_RX_PD_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_USBPHY_DIRECT_TX_DM +// Description : Output data. TX_DIFFMODE=1, Ignored +// TX_DIFFMODE=0, Drives DPM only. TX_DM_OE=1 to enable drive. +// DPM=TX_DM +#define USB_USBPHY_DIRECT_TX_DM_RESET _u(0x0) +#define USB_USBPHY_DIRECT_TX_DM_BITS _u(0x00000800) +#define USB_USBPHY_DIRECT_TX_DM_MSB _u(11) +#define USB_USBPHY_DIRECT_TX_DM_LSB _u(11) +#define USB_USBPHY_DIRECT_TX_DM_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_USBPHY_DIRECT_TX_DP +// Description : Output data. If TX_DIFFMODE=1, Drives DPP/DPM diff pair. +// TX_DP_OE=1 to enable drive. DPP=TX_DP, DPM=~TX_DP +// If TX_DIFFMODE=0, Drives DPP only. TX_DP_OE=1 to enable drive. +// DPP=TX_DP +#define USB_USBPHY_DIRECT_TX_DP_RESET _u(0x0) +#define USB_USBPHY_DIRECT_TX_DP_BITS _u(0x00000400) +#define USB_USBPHY_DIRECT_TX_DP_MSB _u(10) +#define USB_USBPHY_DIRECT_TX_DP_LSB _u(10) +#define USB_USBPHY_DIRECT_TX_DP_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_USBPHY_DIRECT_TX_DM_OE +// Description : Output enable. If TX_DIFFMODE=1, Ignored. +// If TX_DIFFMODE=0, OE for DPM only. 0 - DPM in Hi-Z state; 1 - +// DPM driving +#define USB_USBPHY_DIRECT_TX_DM_OE_RESET _u(0x0) +#define USB_USBPHY_DIRECT_TX_DM_OE_BITS _u(0x00000200) +#define USB_USBPHY_DIRECT_TX_DM_OE_MSB _u(9) +#define USB_USBPHY_DIRECT_TX_DM_OE_LSB _u(9) +#define USB_USBPHY_DIRECT_TX_DM_OE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_USBPHY_DIRECT_TX_DP_OE +// Description : Output enable. If TX_DIFFMODE=1, OE for DPP/DPM diff pair. 0 - +// DPP/DPM in Hi-Z state; 1 - DPP/DPM driving +// If TX_DIFFMODE=0, OE for DPP only. 0 - DPP in Hi-Z state; 1 - +// DPP driving +#define USB_USBPHY_DIRECT_TX_DP_OE_RESET _u(0x0) +#define USB_USBPHY_DIRECT_TX_DP_OE_BITS _u(0x00000100) +#define USB_USBPHY_DIRECT_TX_DP_OE_MSB _u(8) +#define USB_USBPHY_DIRECT_TX_DP_OE_LSB _u(8) +#define USB_USBPHY_DIRECT_TX_DP_OE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_USBPHY_DIRECT_DM_PULLDN_EN +// Description : DM pull down enable +#define USB_USBPHY_DIRECT_DM_PULLDN_EN_RESET _u(0x0) +#define USB_USBPHY_DIRECT_DM_PULLDN_EN_BITS _u(0x00000040) +#define USB_USBPHY_DIRECT_DM_PULLDN_EN_MSB _u(6) +#define USB_USBPHY_DIRECT_DM_PULLDN_EN_LSB _u(6) +#define USB_USBPHY_DIRECT_DM_PULLDN_EN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_USBPHY_DIRECT_DM_PULLUP_EN +// Description : DM pull up enable +#define USB_USBPHY_DIRECT_DM_PULLUP_EN_RESET _u(0x0) +#define USB_USBPHY_DIRECT_DM_PULLUP_EN_BITS _u(0x00000020) +#define USB_USBPHY_DIRECT_DM_PULLUP_EN_MSB _u(5) +#define USB_USBPHY_DIRECT_DM_PULLUP_EN_LSB _u(5) +#define USB_USBPHY_DIRECT_DM_PULLUP_EN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_USBPHY_DIRECT_DM_PULLUP_HISEL +// Description : Enable the second DM pull up resistor. 0 - Pull = Rpu2; 1 - +// Pull = Rpu1 + Rpu2 +#define USB_USBPHY_DIRECT_DM_PULLUP_HISEL_RESET _u(0x0) +#define USB_USBPHY_DIRECT_DM_PULLUP_HISEL_BITS _u(0x00000010) +#define USB_USBPHY_DIRECT_DM_PULLUP_HISEL_MSB _u(4) +#define USB_USBPHY_DIRECT_DM_PULLUP_HISEL_LSB _u(4) +#define USB_USBPHY_DIRECT_DM_PULLUP_HISEL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_USBPHY_DIRECT_DP_PULLDN_EN +// Description : DP pull down enable +#define USB_USBPHY_DIRECT_DP_PULLDN_EN_RESET _u(0x0) +#define USB_USBPHY_DIRECT_DP_PULLDN_EN_BITS _u(0x00000004) +#define USB_USBPHY_DIRECT_DP_PULLDN_EN_MSB _u(2) +#define USB_USBPHY_DIRECT_DP_PULLDN_EN_LSB _u(2) +#define USB_USBPHY_DIRECT_DP_PULLDN_EN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_USBPHY_DIRECT_DP_PULLUP_EN +// Description : DP pull up enable +#define USB_USBPHY_DIRECT_DP_PULLUP_EN_RESET _u(0x0) +#define USB_USBPHY_DIRECT_DP_PULLUP_EN_BITS _u(0x00000002) +#define USB_USBPHY_DIRECT_DP_PULLUP_EN_MSB _u(1) +#define USB_USBPHY_DIRECT_DP_PULLUP_EN_LSB _u(1) +#define USB_USBPHY_DIRECT_DP_PULLUP_EN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_USBPHY_DIRECT_DP_PULLUP_HISEL +// Description : Enable the second DP pull up resistor. 0 - Pull = Rpu2; 1 - +// Pull = Rpu1 + Rpu2 +#define USB_USBPHY_DIRECT_DP_PULLUP_HISEL_RESET _u(0x0) +#define USB_USBPHY_DIRECT_DP_PULLUP_HISEL_BITS _u(0x00000001) +#define USB_USBPHY_DIRECT_DP_PULLUP_HISEL_MSB _u(0) +#define USB_USBPHY_DIRECT_DP_PULLUP_HISEL_LSB _u(0) +#define USB_USBPHY_DIRECT_DP_PULLUP_HISEL_ACCESS "RW" +// ============================================================================= +// Register : USB_USBPHY_DIRECT_OVERRIDE +// Description : Override enable for each control in usbphy_direct +#define USB_USBPHY_DIRECT_OVERRIDE_OFFSET _u(0x00000080) +#define USB_USBPHY_DIRECT_OVERRIDE_BITS _u(0x00009fff) +#define USB_USBPHY_DIRECT_OVERRIDE_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_USBPHY_DIRECT_OVERRIDE_TX_DIFFMODE_OVERRIDE_EN +// Description : None +#define USB_USBPHY_DIRECT_OVERRIDE_TX_DIFFMODE_OVERRIDE_EN_RESET _u(0x0) +#define USB_USBPHY_DIRECT_OVERRIDE_TX_DIFFMODE_OVERRIDE_EN_BITS _u(0x00008000) +#define USB_USBPHY_DIRECT_OVERRIDE_TX_DIFFMODE_OVERRIDE_EN_MSB _u(15) +#define USB_USBPHY_DIRECT_OVERRIDE_TX_DIFFMODE_OVERRIDE_EN_LSB _u(15) +#define USB_USBPHY_DIRECT_OVERRIDE_TX_DIFFMODE_OVERRIDE_EN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_USBPHY_DIRECT_OVERRIDE_DM_PULLUP_OVERRIDE_EN +// Description : None +#define USB_USBPHY_DIRECT_OVERRIDE_DM_PULLUP_OVERRIDE_EN_RESET _u(0x0) +#define USB_USBPHY_DIRECT_OVERRIDE_DM_PULLUP_OVERRIDE_EN_BITS _u(0x00001000) +#define USB_USBPHY_DIRECT_OVERRIDE_DM_PULLUP_OVERRIDE_EN_MSB _u(12) +#define USB_USBPHY_DIRECT_OVERRIDE_DM_PULLUP_OVERRIDE_EN_LSB _u(12) +#define USB_USBPHY_DIRECT_OVERRIDE_DM_PULLUP_OVERRIDE_EN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_USBPHY_DIRECT_OVERRIDE_TX_FSSLEW_OVERRIDE_EN +// Description : None +#define USB_USBPHY_DIRECT_OVERRIDE_TX_FSSLEW_OVERRIDE_EN_RESET _u(0x0) +#define USB_USBPHY_DIRECT_OVERRIDE_TX_FSSLEW_OVERRIDE_EN_BITS _u(0x00000800) +#define USB_USBPHY_DIRECT_OVERRIDE_TX_FSSLEW_OVERRIDE_EN_MSB _u(11) +#define USB_USBPHY_DIRECT_OVERRIDE_TX_FSSLEW_OVERRIDE_EN_LSB _u(11) +#define USB_USBPHY_DIRECT_OVERRIDE_TX_FSSLEW_OVERRIDE_EN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_USBPHY_DIRECT_OVERRIDE_TX_PD_OVERRIDE_EN +// Description : None +#define USB_USBPHY_DIRECT_OVERRIDE_TX_PD_OVERRIDE_EN_RESET _u(0x0) +#define USB_USBPHY_DIRECT_OVERRIDE_TX_PD_OVERRIDE_EN_BITS _u(0x00000400) +#define USB_USBPHY_DIRECT_OVERRIDE_TX_PD_OVERRIDE_EN_MSB _u(10) +#define USB_USBPHY_DIRECT_OVERRIDE_TX_PD_OVERRIDE_EN_LSB _u(10) +#define USB_USBPHY_DIRECT_OVERRIDE_TX_PD_OVERRIDE_EN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_USBPHY_DIRECT_OVERRIDE_RX_PD_OVERRIDE_EN +// Description : None +#define USB_USBPHY_DIRECT_OVERRIDE_RX_PD_OVERRIDE_EN_RESET _u(0x0) +#define USB_USBPHY_DIRECT_OVERRIDE_RX_PD_OVERRIDE_EN_BITS _u(0x00000200) +#define USB_USBPHY_DIRECT_OVERRIDE_RX_PD_OVERRIDE_EN_MSB _u(9) +#define USB_USBPHY_DIRECT_OVERRIDE_RX_PD_OVERRIDE_EN_LSB _u(9) +#define USB_USBPHY_DIRECT_OVERRIDE_RX_PD_OVERRIDE_EN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_USBPHY_DIRECT_OVERRIDE_TX_DM_OVERRIDE_EN +// Description : None +#define USB_USBPHY_DIRECT_OVERRIDE_TX_DM_OVERRIDE_EN_RESET _u(0x0) +#define USB_USBPHY_DIRECT_OVERRIDE_TX_DM_OVERRIDE_EN_BITS _u(0x00000100) +#define USB_USBPHY_DIRECT_OVERRIDE_TX_DM_OVERRIDE_EN_MSB _u(8) +#define USB_USBPHY_DIRECT_OVERRIDE_TX_DM_OVERRIDE_EN_LSB _u(8) +#define USB_USBPHY_DIRECT_OVERRIDE_TX_DM_OVERRIDE_EN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_USBPHY_DIRECT_OVERRIDE_TX_DP_OVERRIDE_EN +// Description : None +#define USB_USBPHY_DIRECT_OVERRIDE_TX_DP_OVERRIDE_EN_RESET _u(0x0) +#define USB_USBPHY_DIRECT_OVERRIDE_TX_DP_OVERRIDE_EN_BITS _u(0x00000080) +#define USB_USBPHY_DIRECT_OVERRIDE_TX_DP_OVERRIDE_EN_MSB _u(7) +#define USB_USBPHY_DIRECT_OVERRIDE_TX_DP_OVERRIDE_EN_LSB _u(7) +#define USB_USBPHY_DIRECT_OVERRIDE_TX_DP_OVERRIDE_EN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_USBPHY_DIRECT_OVERRIDE_TX_DM_OE_OVERRIDE_EN +// Description : None +#define USB_USBPHY_DIRECT_OVERRIDE_TX_DM_OE_OVERRIDE_EN_RESET _u(0x0) +#define USB_USBPHY_DIRECT_OVERRIDE_TX_DM_OE_OVERRIDE_EN_BITS _u(0x00000040) +#define USB_USBPHY_DIRECT_OVERRIDE_TX_DM_OE_OVERRIDE_EN_MSB _u(6) +#define USB_USBPHY_DIRECT_OVERRIDE_TX_DM_OE_OVERRIDE_EN_LSB _u(6) +#define USB_USBPHY_DIRECT_OVERRIDE_TX_DM_OE_OVERRIDE_EN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_USBPHY_DIRECT_OVERRIDE_TX_DP_OE_OVERRIDE_EN +// Description : None +#define USB_USBPHY_DIRECT_OVERRIDE_TX_DP_OE_OVERRIDE_EN_RESET _u(0x0) +#define USB_USBPHY_DIRECT_OVERRIDE_TX_DP_OE_OVERRIDE_EN_BITS _u(0x00000020) +#define USB_USBPHY_DIRECT_OVERRIDE_TX_DP_OE_OVERRIDE_EN_MSB _u(5) +#define USB_USBPHY_DIRECT_OVERRIDE_TX_DP_OE_OVERRIDE_EN_LSB _u(5) +#define USB_USBPHY_DIRECT_OVERRIDE_TX_DP_OE_OVERRIDE_EN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_USBPHY_DIRECT_OVERRIDE_DM_PULLDN_EN_OVERRIDE_EN +// Description : None +#define USB_USBPHY_DIRECT_OVERRIDE_DM_PULLDN_EN_OVERRIDE_EN_RESET _u(0x0) +#define USB_USBPHY_DIRECT_OVERRIDE_DM_PULLDN_EN_OVERRIDE_EN_BITS _u(0x00000010) +#define USB_USBPHY_DIRECT_OVERRIDE_DM_PULLDN_EN_OVERRIDE_EN_MSB _u(4) +#define USB_USBPHY_DIRECT_OVERRIDE_DM_PULLDN_EN_OVERRIDE_EN_LSB _u(4) +#define USB_USBPHY_DIRECT_OVERRIDE_DM_PULLDN_EN_OVERRIDE_EN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_USBPHY_DIRECT_OVERRIDE_DP_PULLDN_EN_OVERRIDE_EN +// Description : None +#define USB_USBPHY_DIRECT_OVERRIDE_DP_PULLDN_EN_OVERRIDE_EN_RESET _u(0x0) +#define USB_USBPHY_DIRECT_OVERRIDE_DP_PULLDN_EN_OVERRIDE_EN_BITS _u(0x00000008) +#define USB_USBPHY_DIRECT_OVERRIDE_DP_PULLDN_EN_OVERRIDE_EN_MSB _u(3) +#define USB_USBPHY_DIRECT_OVERRIDE_DP_PULLDN_EN_OVERRIDE_EN_LSB _u(3) +#define USB_USBPHY_DIRECT_OVERRIDE_DP_PULLDN_EN_OVERRIDE_EN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_USBPHY_DIRECT_OVERRIDE_DP_PULLUP_EN_OVERRIDE_EN +// Description : None +#define USB_USBPHY_DIRECT_OVERRIDE_DP_PULLUP_EN_OVERRIDE_EN_RESET _u(0x0) +#define USB_USBPHY_DIRECT_OVERRIDE_DP_PULLUP_EN_OVERRIDE_EN_BITS _u(0x00000004) +#define USB_USBPHY_DIRECT_OVERRIDE_DP_PULLUP_EN_OVERRIDE_EN_MSB _u(2) +#define USB_USBPHY_DIRECT_OVERRIDE_DP_PULLUP_EN_OVERRIDE_EN_LSB _u(2) +#define USB_USBPHY_DIRECT_OVERRIDE_DP_PULLUP_EN_OVERRIDE_EN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_USBPHY_DIRECT_OVERRIDE_DM_PULLUP_HISEL_OVERRIDE_EN +// Description : None +#define USB_USBPHY_DIRECT_OVERRIDE_DM_PULLUP_HISEL_OVERRIDE_EN_RESET _u(0x0) +#define USB_USBPHY_DIRECT_OVERRIDE_DM_PULLUP_HISEL_OVERRIDE_EN_BITS _u(0x00000002) +#define USB_USBPHY_DIRECT_OVERRIDE_DM_PULLUP_HISEL_OVERRIDE_EN_MSB _u(1) +#define USB_USBPHY_DIRECT_OVERRIDE_DM_PULLUP_HISEL_OVERRIDE_EN_LSB _u(1) +#define USB_USBPHY_DIRECT_OVERRIDE_DM_PULLUP_HISEL_OVERRIDE_EN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_USBPHY_DIRECT_OVERRIDE_DP_PULLUP_HISEL_OVERRIDE_EN +// Description : None +#define USB_USBPHY_DIRECT_OVERRIDE_DP_PULLUP_HISEL_OVERRIDE_EN_RESET _u(0x0) +#define USB_USBPHY_DIRECT_OVERRIDE_DP_PULLUP_HISEL_OVERRIDE_EN_BITS _u(0x00000001) +#define USB_USBPHY_DIRECT_OVERRIDE_DP_PULLUP_HISEL_OVERRIDE_EN_MSB _u(0) +#define USB_USBPHY_DIRECT_OVERRIDE_DP_PULLUP_HISEL_OVERRIDE_EN_LSB _u(0) +#define USB_USBPHY_DIRECT_OVERRIDE_DP_PULLUP_HISEL_OVERRIDE_EN_ACCESS "RW" +// ============================================================================= +// Register : USB_USBPHY_TRIM +// Description : Used to adjust trim values of USB phy pull down resistors. +#define USB_USBPHY_TRIM_OFFSET _u(0x00000084) +#define USB_USBPHY_TRIM_BITS _u(0x00001f1f) +#define USB_USBPHY_TRIM_RESET _u(0x00001f1f) +// ----------------------------------------------------------------------------- +// Field : USB_USBPHY_TRIM_DM_PULLDN_TRIM +// Description : Value to drive to USB PHY +// DM pulldown resistor trim control +// Experimental data suggests that the reset value will work, but +// this register allows adjustment if required +#define USB_USBPHY_TRIM_DM_PULLDN_TRIM_RESET _u(0x1f) +#define USB_USBPHY_TRIM_DM_PULLDN_TRIM_BITS _u(0x00001f00) +#define USB_USBPHY_TRIM_DM_PULLDN_TRIM_MSB _u(12) +#define USB_USBPHY_TRIM_DM_PULLDN_TRIM_LSB _u(8) +#define USB_USBPHY_TRIM_DM_PULLDN_TRIM_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_USBPHY_TRIM_DP_PULLDN_TRIM +// Description : Value to drive to USB PHY +// DP pulldown resistor trim control +// Experimental data suggests that the reset value will work, but +// this register allows adjustment if required +#define USB_USBPHY_TRIM_DP_PULLDN_TRIM_RESET _u(0x1f) +#define USB_USBPHY_TRIM_DP_PULLDN_TRIM_BITS _u(0x0000001f) +#define USB_USBPHY_TRIM_DP_PULLDN_TRIM_MSB _u(4) +#define USB_USBPHY_TRIM_DP_PULLDN_TRIM_LSB _u(0) +#define USB_USBPHY_TRIM_DP_PULLDN_TRIM_ACCESS "RW" +// ============================================================================= +// Register : USB_INTR +// Description : Raw Interrupts +#define USB_INTR_OFFSET _u(0x0000008c) +#define USB_INTR_BITS _u(0x000fffff) +#define USB_INTR_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_INTR_EP_STALL_NAK +// Description : Raised when any bit in EP_STATUS_STALL_NAK is set. Clear by +// clearing all bits in EP_STATUS_STALL_NAK. +#define USB_INTR_EP_STALL_NAK_RESET _u(0x0) +#define USB_INTR_EP_STALL_NAK_BITS _u(0x00080000) +#define USB_INTR_EP_STALL_NAK_MSB _u(19) +#define USB_INTR_EP_STALL_NAK_LSB _u(19) +#define USB_INTR_EP_STALL_NAK_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_INTR_ABORT_DONE +// Description : Raised when any bit in ABORT_DONE is set. Clear by clearing all +// bits in ABORT_DONE. +#define USB_INTR_ABORT_DONE_RESET _u(0x0) +#define USB_INTR_ABORT_DONE_BITS _u(0x00040000) +#define USB_INTR_ABORT_DONE_MSB _u(18) +#define USB_INTR_ABORT_DONE_LSB _u(18) +#define USB_INTR_ABORT_DONE_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_INTR_DEV_SOF +// Description : Set every time the device receives a SOF (Start of Frame) +// packet. Cleared by reading SOF_RD +#define USB_INTR_DEV_SOF_RESET _u(0x0) +#define USB_INTR_DEV_SOF_BITS _u(0x00020000) +#define USB_INTR_DEV_SOF_MSB _u(17) +#define USB_INTR_DEV_SOF_LSB _u(17) +#define USB_INTR_DEV_SOF_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_INTR_SETUP_REQ +// Description : Device. Source: SIE_STATUS.SETUP_REC +#define USB_INTR_SETUP_REQ_RESET _u(0x0) +#define USB_INTR_SETUP_REQ_BITS _u(0x00010000) +#define USB_INTR_SETUP_REQ_MSB _u(16) +#define USB_INTR_SETUP_REQ_LSB _u(16) +#define USB_INTR_SETUP_REQ_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_INTR_DEV_RESUME_FROM_HOST +// Description : Set when the device receives a resume from the host. Cleared by +// writing to SIE_STATUS.RESUME +#define USB_INTR_DEV_RESUME_FROM_HOST_RESET _u(0x0) +#define USB_INTR_DEV_RESUME_FROM_HOST_BITS _u(0x00008000) +#define USB_INTR_DEV_RESUME_FROM_HOST_MSB _u(15) +#define USB_INTR_DEV_RESUME_FROM_HOST_LSB _u(15) +#define USB_INTR_DEV_RESUME_FROM_HOST_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_INTR_DEV_SUSPEND +// Description : Set when the device suspend state changes. Cleared by writing +// to SIE_STATUS.SUSPENDED +#define USB_INTR_DEV_SUSPEND_RESET _u(0x0) +#define USB_INTR_DEV_SUSPEND_BITS _u(0x00004000) +#define USB_INTR_DEV_SUSPEND_MSB _u(14) +#define USB_INTR_DEV_SUSPEND_LSB _u(14) +#define USB_INTR_DEV_SUSPEND_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_INTR_DEV_CONN_DIS +// Description : Set when the device connection state changes. Cleared by +// writing to SIE_STATUS.CONNECTED +#define USB_INTR_DEV_CONN_DIS_RESET _u(0x0) +#define USB_INTR_DEV_CONN_DIS_BITS _u(0x00002000) +#define USB_INTR_DEV_CONN_DIS_MSB _u(13) +#define USB_INTR_DEV_CONN_DIS_LSB _u(13) +#define USB_INTR_DEV_CONN_DIS_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_INTR_BUS_RESET +// Description : Source: SIE_STATUS.BUS_RESET +#define USB_INTR_BUS_RESET_RESET _u(0x0) +#define USB_INTR_BUS_RESET_BITS _u(0x00001000) +#define USB_INTR_BUS_RESET_MSB _u(12) +#define USB_INTR_BUS_RESET_LSB _u(12) +#define USB_INTR_BUS_RESET_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_INTR_VBUS_DETECT +// Description : Source: SIE_STATUS.VBUS_DETECT +#define USB_INTR_VBUS_DETECT_RESET _u(0x0) +#define USB_INTR_VBUS_DETECT_BITS _u(0x00000800) +#define USB_INTR_VBUS_DETECT_MSB _u(11) +#define USB_INTR_VBUS_DETECT_LSB _u(11) +#define USB_INTR_VBUS_DETECT_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_INTR_STALL +// Description : Source: SIE_STATUS.STALL_REC +#define USB_INTR_STALL_RESET _u(0x0) +#define USB_INTR_STALL_BITS _u(0x00000400) +#define USB_INTR_STALL_MSB _u(10) +#define USB_INTR_STALL_LSB _u(10) +#define USB_INTR_STALL_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_INTR_ERROR_CRC +// Description : Source: SIE_STATUS.CRC_ERROR +#define USB_INTR_ERROR_CRC_RESET _u(0x0) +#define USB_INTR_ERROR_CRC_BITS _u(0x00000200) +#define USB_INTR_ERROR_CRC_MSB _u(9) +#define USB_INTR_ERROR_CRC_LSB _u(9) +#define USB_INTR_ERROR_CRC_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_INTR_ERROR_BIT_STUFF +// Description : Source: SIE_STATUS.BIT_STUFF_ERROR +#define USB_INTR_ERROR_BIT_STUFF_RESET _u(0x0) +#define USB_INTR_ERROR_BIT_STUFF_BITS _u(0x00000100) +#define USB_INTR_ERROR_BIT_STUFF_MSB _u(8) +#define USB_INTR_ERROR_BIT_STUFF_LSB _u(8) +#define USB_INTR_ERROR_BIT_STUFF_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_INTR_ERROR_RX_OVERFLOW +// Description : Source: SIE_STATUS.RX_OVERFLOW +#define USB_INTR_ERROR_RX_OVERFLOW_RESET _u(0x0) +#define USB_INTR_ERROR_RX_OVERFLOW_BITS _u(0x00000080) +#define USB_INTR_ERROR_RX_OVERFLOW_MSB _u(7) +#define USB_INTR_ERROR_RX_OVERFLOW_LSB _u(7) +#define USB_INTR_ERROR_RX_OVERFLOW_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_INTR_ERROR_RX_TIMEOUT +// Description : Source: SIE_STATUS.RX_TIMEOUT +#define USB_INTR_ERROR_RX_TIMEOUT_RESET _u(0x0) +#define USB_INTR_ERROR_RX_TIMEOUT_BITS _u(0x00000040) +#define USB_INTR_ERROR_RX_TIMEOUT_MSB _u(6) +#define USB_INTR_ERROR_RX_TIMEOUT_LSB _u(6) +#define USB_INTR_ERROR_RX_TIMEOUT_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_INTR_ERROR_DATA_SEQ +// Description : Source: SIE_STATUS.DATA_SEQ_ERROR +#define USB_INTR_ERROR_DATA_SEQ_RESET _u(0x0) +#define USB_INTR_ERROR_DATA_SEQ_BITS _u(0x00000020) +#define USB_INTR_ERROR_DATA_SEQ_MSB _u(5) +#define USB_INTR_ERROR_DATA_SEQ_LSB _u(5) +#define USB_INTR_ERROR_DATA_SEQ_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_INTR_BUFF_STATUS +// Description : Raised when any bit in BUFF_STATUS is set. Clear by clearing +// all bits in BUFF_STATUS. +#define USB_INTR_BUFF_STATUS_RESET _u(0x0) +#define USB_INTR_BUFF_STATUS_BITS _u(0x00000010) +#define USB_INTR_BUFF_STATUS_MSB _u(4) +#define USB_INTR_BUFF_STATUS_LSB _u(4) +#define USB_INTR_BUFF_STATUS_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_INTR_TRANS_COMPLETE +// Description : Raised every time SIE_STATUS.TRANS_COMPLETE is set. Clear by +// writing to this bit. +#define USB_INTR_TRANS_COMPLETE_RESET _u(0x0) +#define USB_INTR_TRANS_COMPLETE_BITS _u(0x00000008) +#define USB_INTR_TRANS_COMPLETE_MSB _u(3) +#define USB_INTR_TRANS_COMPLETE_LSB _u(3) +#define USB_INTR_TRANS_COMPLETE_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_INTR_HOST_SOF +// Description : Host: raised every time the host sends a SOF (Start of Frame). +// Cleared by reading SOF_RD +#define USB_INTR_HOST_SOF_RESET _u(0x0) +#define USB_INTR_HOST_SOF_BITS _u(0x00000004) +#define USB_INTR_HOST_SOF_MSB _u(2) +#define USB_INTR_HOST_SOF_LSB _u(2) +#define USB_INTR_HOST_SOF_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_INTR_HOST_RESUME +// Description : Host: raised when a device wakes up the host. Cleared by +// writing to SIE_STATUS.RESUME +#define USB_INTR_HOST_RESUME_RESET _u(0x0) +#define USB_INTR_HOST_RESUME_BITS _u(0x00000002) +#define USB_INTR_HOST_RESUME_MSB _u(1) +#define USB_INTR_HOST_RESUME_LSB _u(1) +#define USB_INTR_HOST_RESUME_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_INTR_HOST_CONN_DIS +// Description : Host: raised when a device is connected or disconnected (i.e. +// when SIE_STATUS.SPEED changes). Cleared by writing to +// SIE_STATUS.SPEED +#define USB_INTR_HOST_CONN_DIS_RESET _u(0x0) +#define USB_INTR_HOST_CONN_DIS_BITS _u(0x00000001) +#define USB_INTR_HOST_CONN_DIS_MSB _u(0) +#define USB_INTR_HOST_CONN_DIS_LSB _u(0) +#define USB_INTR_HOST_CONN_DIS_ACCESS "RO" +// ============================================================================= +// Register : USB_INTE +// Description : Interrupt Enable +#define USB_INTE_OFFSET _u(0x00000090) +#define USB_INTE_BITS _u(0x000fffff) +#define USB_INTE_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_INTE_EP_STALL_NAK +// Description : Raised when any bit in EP_STATUS_STALL_NAK is set. Clear by +// clearing all bits in EP_STATUS_STALL_NAK. +#define USB_INTE_EP_STALL_NAK_RESET _u(0x0) +#define USB_INTE_EP_STALL_NAK_BITS _u(0x00080000) +#define USB_INTE_EP_STALL_NAK_MSB _u(19) +#define USB_INTE_EP_STALL_NAK_LSB _u(19) +#define USB_INTE_EP_STALL_NAK_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_INTE_ABORT_DONE +// Description : Raised when any bit in ABORT_DONE is set. Clear by clearing all +// bits in ABORT_DONE. +#define USB_INTE_ABORT_DONE_RESET _u(0x0) +#define USB_INTE_ABORT_DONE_BITS _u(0x00040000) +#define USB_INTE_ABORT_DONE_MSB _u(18) +#define USB_INTE_ABORT_DONE_LSB _u(18) +#define USB_INTE_ABORT_DONE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_INTE_DEV_SOF +// Description : Set every time the device receives a SOF (Start of Frame) +// packet. Cleared by reading SOF_RD +#define USB_INTE_DEV_SOF_RESET _u(0x0) +#define USB_INTE_DEV_SOF_BITS _u(0x00020000) +#define USB_INTE_DEV_SOF_MSB _u(17) +#define USB_INTE_DEV_SOF_LSB _u(17) +#define USB_INTE_DEV_SOF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_INTE_SETUP_REQ +// Description : Device. Source: SIE_STATUS.SETUP_REC +#define USB_INTE_SETUP_REQ_RESET _u(0x0) +#define USB_INTE_SETUP_REQ_BITS _u(0x00010000) +#define USB_INTE_SETUP_REQ_MSB _u(16) +#define USB_INTE_SETUP_REQ_LSB _u(16) +#define USB_INTE_SETUP_REQ_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_INTE_DEV_RESUME_FROM_HOST +// Description : Set when the device receives a resume from the host. Cleared by +// writing to SIE_STATUS.RESUME +#define USB_INTE_DEV_RESUME_FROM_HOST_RESET _u(0x0) +#define USB_INTE_DEV_RESUME_FROM_HOST_BITS _u(0x00008000) +#define USB_INTE_DEV_RESUME_FROM_HOST_MSB _u(15) +#define USB_INTE_DEV_RESUME_FROM_HOST_LSB _u(15) +#define USB_INTE_DEV_RESUME_FROM_HOST_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_INTE_DEV_SUSPEND +// Description : Set when the device suspend state changes. Cleared by writing +// to SIE_STATUS.SUSPENDED +#define USB_INTE_DEV_SUSPEND_RESET _u(0x0) +#define USB_INTE_DEV_SUSPEND_BITS _u(0x00004000) +#define USB_INTE_DEV_SUSPEND_MSB _u(14) +#define USB_INTE_DEV_SUSPEND_LSB _u(14) +#define USB_INTE_DEV_SUSPEND_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_INTE_DEV_CONN_DIS +// Description : Set when the device connection state changes. Cleared by +// writing to SIE_STATUS.CONNECTED +#define USB_INTE_DEV_CONN_DIS_RESET _u(0x0) +#define USB_INTE_DEV_CONN_DIS_BITS _u(0x00002000) +#define USB_INTE_DEV_CONN_DIS_MSB _u(13) +#define USB_INTE_DEV_CONN_DIS_LSB _u(13) +#define USB_INTE_DEV_CONN_DIS_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_INTE_BUS_RESET +// Description : Source: SIE_STATUS.BUS_RESET +#define USB_INTE_BUS_RESET_RESET _u(0x0) +#define USB_INTE_BUS_RESET_BITS _u(0x00001000) +#define USB_INTE_BUS_RESET_MSB _u(12) +#define USB_INTE_BUS_RESET_LSB _u(12) +#define USB_INTE_BUS_RESET_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_INTE_VBUS_DETECT +// Description : Source: SIE_STATUS.VBUS_DETECT +#define USB_INTE_VBUS_DETECT_RESET _u(0x0) +#define USB_INTE_VBUS_DETECT_BITS _u(0x00000800) +#define USB_INTE_VBUS_DETECT_MSB _u(11) +#define USB_INTE_VBUS_DETECT_LSB _u(11) +#define USB_INTE_VBUS_DETECT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_INTE_STALL +// Description : Source: SIE_STATUS.STALL_REC +#define USB_INTE_STALL_RESET _u(0x0) +#define USB_INTE_STALL_BITS _u(0x00000400) +#define USB_INTE_STALL_MSB _u(10) +#define USB_INTE_STALL_LSB _u(10) +#define USB_INTE_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_INTE_ERROR_CRC +// Description : Source: SIE_STATUS.CRC_ERROR +#define USB_INTE_ERROR_CRC_RESET _u(0x0) +#define USB_INTE_ERROR_CRC_BITS _u(0x00000200) +#define USB_INTE_ERROR_CRC_MSB _u(9) +#define USB_INTE_ERROR_CRC_LSB _u(9) +#define USB_INTE_ERROR_CRC_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_INTE_ERROR_BIT_STUFF +// Description : Source: SIE_STATUS.BIT_STUFF_ERROR +#define USB_INTE_ERROR_BIT_STUFF_RESET _u(0x0) +#define USB_INTE_ERROR_BIT_STUFF_BITS _u(0x00000100) +#define USB_INTE_ERROR_BIT_STUFF_MSB _u(8) +#define USB_INTE_ERROR_BIT_STUFF_LSB _u(8) +#define USB_INTE_ERROR_BIT_STUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_INTE_ERROR_RX_OVERFLOW +// Description : Source: SIE_STATUS.RX_OVERFLOW +#define USB_INTE_ERROR_RX_OVERFLOW_RESET _u(0x0) +#define USB_INTE_ERROR_RX_OVERFLOW_BITS _u(0x00000080) +#define USB_INTE_ERROR_RX_OVERFLOW_MSB _u(7) +#define USB_INTE_ERROR_RX_OVERFLOW_LSB _u(7) +#define USB_INTE_ERROR_RX_OVERFLOW_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_INTE_ERROR_RX_TIMEOUT +// Description : Source: SIE_STATUS.RX_TIMEOUT +#define USB_INTE_ERROR_RX_TIMEOUT_RESET _u(0x0) +#define USB_INTE_ERROR_RX_TIMEOUT_BITS _u(0x00000040) +#define USB_INTE_ERROR_RX_TIMEOUT_MSB _u(6) +#define USB_INTE_ERROR_RX_TIMEOUT_LSB _u(6) +#define USB_INTE_ERROR_RX_TIMEOUT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_INTE_ERROR_DATA_SEQ +// Description : Source: SIE_STATUS.DATA_SEQ_ERROR +#define USB_INTE_ERROR_DATA_SEQ_RESET _u(0x0) +#define USB_INTE_ERROR_DATA_SEQ_BITS _u(0x00000020) +#define USB_INTE_ERROR_DATA_SEQ_MSB _u(5) +#define USB_INTE_ERROR_DATA_SEQ_LSB _u(5) +#define USB_INTE_ERROR_DATA_SEQ_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_INTE_BUFF_STATUS +// Description : Raised when any bit in BUFF_STATUS is set. Clear by clearing +// all bits in BUFF_STATUS. +#define USB_INTE_BUFF_STATUS_RESET _u(0x0) +#define USB_INTE_BUFF_STATUS_BITS _u(0x00000010) +#define USB_INTE_BUFF_STATUS_MSB _u(4) +#define USB_INTE_BUFF_STATUS_LSB _u(4) +#define USB_INTE_BUFF_STATUS_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_INTE_TRANS_COMPLETE +// Description : Raised every time SIE_STATUS.TRANS_COMPLETE is set. Clear by +// writing to this bit. +#define USB_INTE_TRANS_COMPLETE_RESET _u(0x0) +#define USB_INTE_TRANS_COMPLETE_BITS _u(0x00000008) +#define USB_INTE_TRANS_COMPLETE_MSB _u(3) +#define USB_INTE_TRANS_COMPLETE_LSB _u(3) +#define USB_INTE_TRANS_COMPLETE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_INTE_HOST_SOF +// Description : Host: raised every time the host sends a SOF (Start of Frame). +// Cleared by reading SOF_RD +#define USB_INTE_HOST_SOF_RESET _u(0x0) +#define USB_INTE_HOST_SOF_BITS _u(0x00000004) +#define USB_INTE_HOST_SOF_MSB _u(2) +#define USB_INTE_HOST_SOF_LSB _u(2) +#define USB_INTE_HOST_SOF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_INTE_HOST_RESUME +// Description : Host: raised when a device wakes up the host. Cleared by +// writing to SIE_STATUS.RESUME +#define USB_INTE_HOST_RESUME_RESET _u(0x0) +#define USB_INTE_HOST_RESUME_BITS _u(0x00000002) +#define USB_INTE_HOST_RESUME_MSB _u(1) +#define USB_INTE_HOST_RESUME_LSB _u(1) +#define USB_INTE_HOST_RESUME_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_INTE_HOST_CONN_DIS +// Description : Host: raised when a device is connected or disconnected (i.e. +// when SIE_STATUS.SPEED changes). Cleared by writing to +// SIE_STATUS.SPEED +#define USB_INTE_HOST_CONN_DIS_RESET _u(0x0) +#define USB_INTE_HOST_CONN_DIS_BITS _u(0x00000001) +#define USB_INTE_HOST_CONN_DIS_MSB _u(0) +#define USB_INTE_HOST_CONN_DIS_LSB _u(0) +#define USB_INTE_HOST_CONN_DIS_ACCESS "RW" +// ============================================================================= +// Register : USB_INTF +// Description : Interrupt Force +#define USB_INTF_OFFSET _u(0x00000094) +#define USB_INTF_BITS _u(0x000fffff) +#define USB_INTF_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_INTF_EP_STALL_NAK +// Description : Raised when any bit in EP_STATUS_STALL_NAK is set. Clear by +// clearing all bits in EP_STATUS_STALL_NAK. +#define USB_INTF_EP_STALL_NAK_RESET _u(0x0) +#define USB_INTF_EP_STALL_NAK_BITS _u(0x00080000) +#define USB_INTF_EP_STALL_NAK_MSB _u(19) +#define USB_INTF_EP_STALL_NAK_LSB _u(19) +#define USB_INTF_EP_STALL_NAK_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_INTF_ABORT_DONE +// Description : Raised when any bit in ABORT_DONE is set. Clear by clearing all +// bits in ABORT_DONE. +#define USB_INTF_ABORT_DONE_RESET _u(0x0) +#define USB_INTF_ABORT_DONE_BITS _u(0x00040000) +#define USB_INTF_ABORT_DONE_MSB _u(18) +#define USB_INTF_ABORT_DONE_LSB _u(18) +#define USB_INTF_ABORT_DONE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_INTF_DEV_SOF +// Description : Set every time the device receives a SOF (Start of Frame) +// packet. Cleared by reading SOF_RD +#define USB_INTF_DEV_SOF_RESET _u(0x0) +#define USB_INTF_DEV_SOF_BITS _u(0x00020000) +#define USB_INTF_DEV_SOF_MSB _u(17) +#define USB_INTF_DEV_SOF_LSB _u(17) +#define USB_INTF_DEV_SOF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_INTF_SETUP_REQ +// Description : Device. Source: SIE_STATUS.SETUP_REC +#define USB_INTF_SETUP_REQ_RESET _u(0x0) +#define USB_INTF_SETUP_REQ_BITS _u(0x00010000) +#define USB_INTF_SETUP_REQ_MSB _u(16) +#define USB_INTF_SETUP_REQ_LSB _u(16) +#define USB_INTF_SETUP_REQ_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_INTF_DEV_RESUME_FROM_HOST +// Description : Set when the device receives a resume from the host. Cleared by +// writing to SIE_STATUS.RESUME +#define USB_INTF_DEV_RESUME_FROM_HOST_RESET _u(0x0) +#define USB_INTF_DEV_RESUME_FROM_HOST_BITS _u(0x00008000) +#define USB_INTF_DEV_RESUME_FROM_HOST_MSB _u(15) +#define USB_INTF_DEV_RESUME_FROM_HOST_LSB _u(15) +#define USB_INTF_DEV_RESUME_FROM_HOST_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_INTF_DEV_SUSPEND +// Description : Set when the device suspend state changes. Cleared by writing +// to SIE_STATUS.SUSPENDED +#define USB_INTF_DEV_SUSPEND_RESET _u(0x0) +#define USB_INTF_DEV_SUSPEND_BITS _u(0x00004000) +#define USB_INTF_DEV_SUSPEND_MSB _u(14) +#define USB_INTF_DEV_SUSPEND_LSB _u(14) +#define USB_INTF_DEV_SUSPEND_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_INTF_DEV_CONN_DIS +// Description : Set when the device connection state changes. Cleared by +// writing to SIE_STATUS.CONNECTED +#define USB_INTF_DEV_CONN_DIS_RESET _u(0x0) +#define USB_INTF_DEV_CONN_DIS_BITS _u(0x00002000) +#define USB_INTF_DEV_CONN_DIS_MSB _u(13) +#define USB_INTF_DEV_CONN_DIS_LSB _u(13) +#define USB_INTF_DEV_CONN_DIS_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_INTF_BUS_RESET +// Description : Source: SIE_STATUS.BUS_RESET +#define USB_INTF_BUS_RESET_RESET _u(0x0) +#define USB_INTF_BUS_RESET_BITS _u(0x00001000) +#define USB_INTF_BUS_RESET_MSB _u(12) +#define USB_INTF_BUS_RESET_LSB _u(12) +#define USB_INTF_BUS_RESET_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_INTF_VBUS_DETECT +// Description : Source: SIE_STATUS.VBUS_DETECT +#define USB_INTF_VBUS_DETECT_RESET _u(0x0) +#define USB_INTF_VBUS_DETECT_BITS _u(0x00000800) +#define USB_INTF_VBUS_DETECT_MSB _u(11) +#define USB_INTF_VBUS_DETECT_LSB _u(11) +#define USB_INTF_VBUS_DETECT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_INTF_STALL +// Description : Source: SIE_STATUS.STALL_REC +#define USB_INTF_STALL_RESET _u(0x0) +#define USB_INTF_STALL_BITS _u(0x00000400) +#define USB_INTF_STALL_MSB _u(10) +#define USB_INTF_STALL_LSB _u(10) +#define USB_INTF_STALL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_INTF_ERROR_CRC +// Description : Source: SIE_STATUS.CRC_ERROR +#define USB_INTF_ERROR_CRC_RESET _u(0x0) +#define USB_INTF_ERROR_CRC_BITS _u(0x00000200) +#define USB_INTF_ERROR_CRC_MSB _u(9) +#define USB_INTF_ERROR_CRC_LSB _u(9) +#define USB_INTF_ERROR_CRC_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_INTF_ERROR_BIT_STUFF +// Description : Source: SIE_STATUS.BIT_STUFF_ERROR +#define USB_INTF_ERROR_BIT_STUFF_RESET _u(0x0) +#define USB_INTF_ERROR_BIT_STUFF_BITS _u(0x00000100) +#define USB_INTF_ERROR_BIT_STUFF_MSB _u(8) +#define USB_INTF_ERROR_BIT_STUFF_LSB _u(8) +#define USB_INTF_ERROR_BIT_STUFF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_INTF_ERROR_RX_OVERFLOW +// Description : Source: SIE_STATUS.RX_OVERFLOW +#define USB_INTF_ERROR_RX_OVERFLOW_RESET _u(0x0) +#define USB_INTF_ERROR_RX_OVERFLOW_BITS _u(0x00000080) +#define USB_INTF_ERROR_RX_OVERFLOW_MSB _u(7) +#define USB_INTF_ERROR_RX_OVERFLOW_LSB _u(7) +#define USB_INTF_ERROR_RX_OVERFLOW_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_INTF_ERROR_RX_TIMEOUT +// Description : Source: SIE_STATUS.RX_TIMEOUT +#define USB_INTF_ERROR_RX_TIMEOUT_RESET _u(0x0) +#define USB_INTF_ERROR_RX_TIMEOUT_BITS _u(0x00000040) +#define USB_INTF_ERROR_RX_TIMEOUT_MSB _u(6) +#define USB_INTF_ERROR_RX_TIMEOUT_LSB _u(6) +#define USB_INTF_ERROR_RX_TIMEOUT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_INTF_ERROR_DATA_SEQ +// Description : Source: SIE_STATUS.DATA_SEQ_ERROR +#define USB_INTF_ERROR_DATA_SEQ_RESET _u(0x0) +#define USB_INTF_ERROR_DATA_SEQ_BITS _u(0x00000020) +#define USB_INTF_ERROR_DATA_SEQ_MSB _u(5) +#define USB_INTF_ERROR_DATA_SEQ_LSB _u(5) +#define USB_INTF_ERROR_DATA_SEQ_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_INTF_BUFF_STATUS +// Description : Raised when any bit in BUFF_STATUS is set. Clear by clearing +// all bits in BUFF_STATUS. +#define USB_INTF_BUFF_STATUS_RESET _u(0x0) +#define USB_INTF_BUFF_STATUS_BITS _u(0x00000010) +#define USB_INTF_BUFF_STATUS_MSB _u(4) +#define USB_INTF_BUFF_STATUS_LSB _u(4) +#define USB_INTF_BUFF_STATUS_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_INTF_TRANS_COMPLETE +// Description : Raised every time SIE_STATUS.TRANS_COMPLETE is set. Clear by +// writing to this bit. +#define USB_INTF_TRANS_COMPLETE_RESET _u(0x0) +#define USB_INTF_TRANS_COMPLETE_BITS _u(0x00000008) +#define USB_INTF_TRANS_COMPLETE_MSB _u(3) +#define USB_INTF_TRANS_COMPLETE_LSB _u(3) +#define USB_INTF_TRANS_COMPLETE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_INTF_HOST_SOF +// Description : Host: raised every time the host sends a SOF (Start of Frame). +// Cleared by reading SOF_RD +#define USB_INTF_HOST_SOF_RESET _u(0x0) +#define USB_INTF_HOST_SOF_BITS _u(0x00000004) +#define USB_INTF_HOST_SOF_MSB _u(2) +#define USB_INTF_HOST_SOF_LSB _u(2) +#define USB_INTF_HOST_SOF_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_INTF_HOST_RESUME +// Description : Host: raised when a device wakes up the host. Cleared by +// writing to SIE_STATUS.RESUME +#define USB_INTF_HOST_RESUME_RESET _u(0x0) +#define USB_INTF_HOST_RESUME_BITS _u(0x00000002) +#define USB_INTF_HOST_RESUME_MSB _u(1) +#define USB_INTF_HOST_RESUME_LSB _u(1) +#define USB_INTF_HOST_RESUME_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : USB_INTF_HOST_CONN_DIS +// Description : Host: raised when a device is connected or disconnected (i.e. +// when SIE_STATUS.SPEED changes). Cleared by writing to +// SIE_STATUS.SPEED +#define USB_INTF_HOST_CONN_DIS_RESET _u(0x0) +#define USB_INTF_HOST_CONN_DIS_BITS _u(0x00000001) +#define USB_INTF_HOST_CONN_DIS_MSB _u(0) +#define USB_INTF_HOST_CONN_DIS_LSB _u(0) +#define USB_INTF_HOST_CONN_DIS_ACCESS "RW" +// ============================================================================= +// Register : USB_INTS +// Description : Interrupt status after masking & forcing +#define USB_INTS_OFFSET _u(0x00000098) +#define USB_INTS_BITS _u(0x000fffff) +#define USB_INTS_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : USB_INTS_EP_STALL_NAK +// Description : Raised when any bit in EP_STATUS_STALL_NAK is set. Clear by +// clearing all bits in EP_STATUS_STALL_NAK. +#define USB_INTS_EP_STALL_NAK_RESET _u(0x0) +#define USB_INTS_EP_STALL_NAK_BITS _u(0x00080000) +#define USB_INTS_EP_STALL_NAK_MSB _u(19) +#define USB_INTS_EP_STALL_NAK_LSB _u(19) +#define USB_INTS_EP_STALL_NAK_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_INTS_ABORT_DONE +// Description : Raised when any bit in ABORT_DONE is set. Clear by clearing all +// bits in ABORT_DONE. +#define USB_INTS_ABORT_DONE_RESET _u(0x0) +#define USB_INTS_ABORT_DONE_BITS _u(0x00040000) +#define USB_INTS_ABORT_DONE_MSB _u(18) +#define USB_INTS_ABORT_DONE_LSB _u(18) +#define USB_INTS_ABORT_DONE_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_INTS_DEV_SOF +// Description : Set every time the device receives a SOF (Start of Frame) +// packet. Cleared by reading SOF_RD +#define USB_INTS_DEV_SOF_RESET _u(0x0) +#define USB_INTS_DEV_SOF_BITS _u(0x00020000) +#define USB_INTS_DEV_SOF_MSB _u(17) +#define USB_INTS_DEV_SOF_LSB _u(17) +#define USB_INTS_DEV_SOF_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_INTS_SETUP_REQ +// Description : Device. Source: SIE_STATUS.SETUP_REC +#define USB_INTS_SETUP_REQ_RESET _u(0x0) +#define USB_INTS_SETUP_REQ_BITS _u(0x00010000) +#define USB_INTS_SETUP_REQ_MSB _u(16) +#define USB_INTS_SETUP_REQ_LSB _u(16) +#define USB_INTS_SETUP_REQ_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_INTS_DEV_RESUME_FROM_HOST +// Description : Set when the device receives a resume from the host. Cleared by +// writing to SIE_STATUS.RESUME +#define USB_INTS_DEV_RESUME_FROM_HOST_RESET _u(0x0) +#define USB_INTS_DEV_RESUME_FROM_HOST_BITS _u(0x00008000) +#define USB_INTS_DEV_RESUME_FROM_HOST_MSB _u(15) +#define USB_INTS_DEV_RESUME_FROM_HOST_LSB _u(15) +#define USB_INTS_DEV_RESUME_FROM_HOST_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_INTS_DEV_SUSPEND +// Description : Set when the device suspend state changes. Cleared by writing +// to SIE_STATUS.SUSPENDED +#define USB_INTS_DEV_SUSPEND_RESET _u(0x0) +#define USB_INTS_DEV_SUSPEND_BITS _u(0x00004000) +#define USB_INTS_DEV_SUSPEND_MSB _u(14) +#define USB_INTS_DEV_SUSPEND_LSB _u(14) +#define USB_INTS_DEV_SUSPEND_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_INTS_DEV_CONN_DIS +// Description : Set when the device connection state changes. Cleared by +// writing to SIE_STATUS.CONNECTED +#define USB_INTS_DEV_CONN_DIS_RESET _u(0x0) +#define USB_INTS_DEV_CONN_DIS_BITS _u(0x00002000) +#define USB_INTS_DEV_CONN_DIS_MSB _u(13) +#define USB_INTS_DEV_CONN_DIS_LSB _u(13) +#define USB_INTS_DEV_CONN_DIS_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_INTS_BUS_RESET +// Description : Source: SIE_STATUS.BUS_RESET +#define USB_INTS_BUS_RESET_RESET _u(0x0) +#define USB_INTS_BUS_RESET_BITS _u(0x00001000) +#define USB_INTS_BUS_RESET_MSB _u(12) +#define USB_INTS_BUS_RESET_LSB _u(12) +#define USB_INTS_BUS_RESET_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_INTS_VBUS_DETECT +// Description : Source: SIE_STATUS.VBUS_DETECT +#define USB_INTS_VBUS_DETECT_RESET _u(0x0) +#define USB_INTS_VBUS_DETECT_BITS _u(0x00000800) +#define USB_INTS_VBUS_DETECT_MSB _u(11) +#define USB_INTS_VBUS_DETECT_LSB _u(11) +#define USB_INTS_VBUS_DETECT_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_INTS_STALL +// Description : Source: SIE_STATUS.STALL_REC +#define USB_INTS_STALL_RESET _u(0x0) +#define USB_INTS_STALL_BITS _u(0x00000400) +#define USB_INTS_STALL_MSB _u(10) +#define USB_INTS_STALL_LSB _u(10) +#define USB_INTS_STALL_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_INTS_ERROR_CRC +// Description : Source: SIE_STATUS.CRC_ERROR +#define USB_INTS_ERROR_CRC_RESET _u(0x0) +#define USB_INTS_ERROR_CRC_BITS _u(0x00000200) +#define USB_INTS_ERROR_CRC_MSB _u(9) +#define USB_INTS_ERROR_CRC_LSB _u(9) +#define USB_INTS_ERROR_CRC_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_INTS_ERROR_BIT_STUFF +// Description : Source: SIE_STATUS.BIT_STUFF_ERROR +#define USB_INTS_ERROR_BIT_STUFF_RESET _u(0x0) +#define USB_INTS_ERROR_BIT_STUFF_BITS _u(0x00000100) +#define USB_INTS_ERROR_BIT_STUFF_MSB _u(8) +#define USB_INTS_ERROR_BIT_STUFF_LSB _u(8) +#define USB_INTS_ERROR_BIT_STUFF_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_INTS_ERROR_RX_OVERFLOW +// Description : Source: SIE_STATUS.RX_OVERFLOW +#define USB_INTS_ERROR_RX_OVERFLOW_RESET _u(0x0) +#define USB_INTS_ERROR_RX_OVERFLOW_BITS _u(0x00000080) +#define USB_INTS_ERROR_RX_OVERFLOW_MSB _u(7) +#define USB_INTS_ERROR_RX_OVERFLOW_LSB _u(7) +#define USB_INTS_ERROR_RX_OVERFLOW_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_INTS_ERROR_RX_TIMEOUT +// Description : Source: SIE_STATUS.RX_TIMEOUT +#define USB_INTS_ERROR_RX_TIMEOUT_RESET _u(0x0) +#define USB_INTS_ERROR_RX_TIMEOUT_BITS _u(0x00000040) +#define USB_INTS_ERROR_RX_TIMEOUT_MSB _u(6) +#define USB_INTS_ERROR_RX_TIMEOUT_LSB _u(6) +#define USB_INTS_ERROR_RX_TIMEOUT_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_INTS_ERROR_DATA_SEQ +// Description : Source: SIE_STATUS.DATA_SEQ_ERROR +#define USB_INTS_ERROR_DATA_SEQ_RESET _u(0x0) +#define USB_INTS_ERROR_DATA_SEQ_BITS _u(0x00000020) +#define USB_INTS_ERROR_DATA_SEQ_MSB _u(5) +#define USB_INTS_ERROR_DATA_SEQ_LSB _u(5) +#define USB_INTS_ERROR_DATA_SEQ_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_INTS_BUFF_STATUS +// Description : Raised when any bit in BUFF_STATUS is set. Clear by clearing +// all bits in BUFF_STATUS. +#define USB_INTS_BUFF_STATUS_RESET _u(0x0) +#define USB_INTS_BUFF_STATUS_BITS _u(0x00000010) +#define USB_INTS_BUFF_STATUS_MSB _u(4) +#define USB_INTS_BUFF_STATUS_LSB _u(4) +#define USB_INTS_BUFF_STATUS_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_INTS_TRANS_COMPLETE +// Description : Raised every time SIE_STATUS.TRANS_COMPLETE is set. Clear by +// writing to this bit. +#define USB_INTS_TRANS_COMPLETE_RESET _u(0x0) +#define USB_INTS_TRANS_COMPLETE_BITS _u(0x00000008) +#define USB_INTS_TRANS_COMPLETE_MSB _u(3) +#define USB_INTS_TRANS_COMPLETE_LSB _u(3) +#define USB_INTS_TRANS_COMPLETE_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_INTS_HOST_SOF +// Description : Host: raised every time the host sends a SOF (Start of Frame). +// Cleared by reading SOF_RD +#define USB_INTS_HOST_SOF_RESET _u(0x0) +#define USB_INTS_HOST_SOF_BITS _u(0x00000004) +#define USB_INTS_HOST_SOF_MSB _u(2) +#define USB_INTS_HOST_SOF_LSB _u(2) +#define USB_INTS_HOST_SOF_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_INTS_HOST_RESUME +// Description : Host: raised when a device wakes up the host. Cleared by +// writing to SIE_STATUS.RESUME +#define USB_INTS_HOST_RESUME_RESET _u(0x0) +#define USB_INTS_HOST_RESUME_BITS _u(0x00000002) +#define USB_INTS_HOST_RESUME_MSB _u(1) +#define USB_INTS_HOST_RESUME_LSB _u(1) +#define USB_INTS_HOST_RESUME_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : USB_INTS_HOST_CONN_DIS +// Description : Host: raised when a device is connected or disconnected (i.e. +// when SIE_STATUS.SPEED changes). Cleared by writing to +// SIE_STATUS.SPEED +#define USB_INTS_HOST_CONN_DIS_RESET _u(0x0) +#define USB_INTS_HOST_CONN_DIS_BITS _u(0x00000001) +#define USB_INTS_HOST_CONN_DIS_MSB _u(0) +#define USB_INTS_HOST_CONN_DIS_LSB _u(0) +#define USB_INTS_HOST_CONN_DIS_ACCESS "RO" +// ============================================================================= +#endif // HARDWARE_REGS_USB_DEFINED |