diff options
Diffstat (limited to 'lib/rp2040/hardware/regs/pads_qspi.h')
| -rw-r--r-- | lib/rp2040/hardware/regs/pads_qspi.h | 454 |
1 files changed, 454 insertions, 0 deletions
diff --git a/lib/rp2040/hardware/regs/pads_qspi.h b/lib/rp2040/hardware/regs/pads_qspi.h new file mode 100644 index 00000000..b3a09e90 --- /dev/null +++ b/lib/rp2040/hardware/regs/pads_qspi.h @@ -0,0 +1,454 @@ +/** + * Copyright (c) 2021 Raspberry Pi (Trading) Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +// ============================================================================= +// Register block : PADS_QSPI +// Version : 1 +// Bus type : apb +// Description : None +// ============================================================================= +#ifndef HARDWARE_REGS_PADS_QSPI_DEFINED +#define HARDWARE_REGS_PADS_QSPI_DEFINED +// ============================================================================= +// Register : PADS_QSPI_VOLTAGE_SELECT +// Description : Voltage select. Per bank control +// 0x0 -> Set voltage to 3.3V (DVDD >= 2V5) +// 0x1 -> Set voltage to 1.8V (DVDD <= 1V8) +#define PADS_QSPI_VOLTAGE_SELECT_OFFSET _u(0x00000000) +#define PADS_QSPI_VOLTAGE_SELECT_BITS _u(0x00000001) +#define PADS_QSPI_VOLTAGE_SELECT_RESET _u(0x00000000) +#define PADS_QSPI_VOLTAGE_SELECT_MSB _u(0) +#define PADS_QSPI_VOLTAGE_SELECT_LSB _u(0) +#define PADS_QSPI_VOLTAGE_SELECT_ACCESS "RW" +#define PADS_QSPI_VOLTAGE_SELECT_VALUE_3V3 _u(0x0) +#define PADS_QSPI_VOLTAGE_SELECT_VALUE_1V8 _u(0x1) +// ============================================================================= +// Register : PADS_QSPI_GPIO_QSPI_SCLK +// Description : Pad control register +#define PADS_QSPI_GPIO_QSPI_SCLK_OFFSET _u(0x00000004) +#define PADS_QSPI_GPIO_QSPI_SCLK_BITS _u(0x000000ff) +#define PADS_QSPI_GPIO_QSPI_SCLK_RESET _u(0x00000056) +// ----------------------------------------------------------------------------- +// Field : PADS_QSPI_GPIO_QSPI_SCLK_OD +// Description : Output disable. Has priority over output enable from +// peripherals +#define PADS_QSPI_GPIO_QSPI_SCLK_OD_RESET _u(0x0) +#define PADS_QSPI_GPIO_QSPI_SCLK_OD_BITS _u(0x00000080) +#define PADS_QSPI_GPIO_QSPI_SCLK_OD_MSB _u(7) +#define PADS_QSPI_GPIO_QSPI_SCLK_OD_LSB _u(7) +#define PADS_QSPI_GPIO_QSPI_SCLK_OD_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_QSPI_GPIO_QSPI_SCLK_IE +// Description : Input enable +#define PADS_QSPI_GPIO_QSPI_SCLK_IE_RESET _u(0x1) +#define PADS_QSPI_GPIO_QSPI_SCLK_IE_BITS _u(0x00000040) +#define PADS_QSPI_GPIO_QSPI_SCLK_IE_MSB _u(6) +#define PADS_QSPI_GPIO_QSPI_SCLK_IE_LSB _u(6) +#define PADS_QSPI_GPIO_QSPI_SCLK_IE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_QSPI_GPIO_QSPI_SCLK_DRIVE +// Description : Drive strength. +// 0x0 -> 2mA +// 0x1 -> 4mA +// 0x2 -> 8mA +// 0x3 -> 12mA +#define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_RESET _u(0x1) +#define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_BITS _u(0x00000030) +#define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_MSB _u(5) +#define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_LSB _u(4) +#define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_ACCESS "RW" +#define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_VALUE_2MA _u(0x0) +#define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_VALUE_4MA _u(0x1) +#define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_VALUE_8MA _u(0x2) +#define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_VALUE_12MA _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PADS_QSPI_GPIO_QSPI_SCLK_PUE +// Description : Pull up enable +#define PADS_QSPI_GPIO_QSPI_SCLK_PUE_RESET _u(0x0) +#define PADS_QSPI_GPIO_QSPI_SCLK_PUE_BITS _u(0x00000008) +#define PADS_QSPI_GPIO_QSPI_SCLK_PUE_MSB _u(3) +#define PADS_QSPI_GPIO_QSPI_SCLK_PUE_LSB _u(3) +#define PADS_QSPI_GPIO_QSPI_SCLK_PUE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_QSPI_GPIO_QSPI_SCLK_PDE +// Description : Pull down enable +#define PADS_QSPI_GPIO_QSPI_SCLK_PDE_RESET _u(0x1) +#define PADS_QSPI_GPIO_QSPI_SCLK_PDE_BITS _u(0x00000004) +#define PADS_QSPI_GPIO_QSPI_SCLK_PDE_MSB _u(2) +#define PADS_QSPI_GPIO_QSPI_SCLK_PDE_LSB _u(2) +#define PADS_QSPI_GPIO_QSPI_SCLK_PDE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_QSPI_GPIO_QSPI_SCLK_SCHMITT +// Description : Enable schmitt trigger +#define PADS_QSPI_GPIO_QSPI_SCLK_SCHMITT_RESET _u(0x1) +#define PADS_QSPI_GPIO_QSPI_SCLK_SCHMITT_BITS _u(0x00000002) +#define PADS_QSPI_GPIO_QSPI_SCLK_SCHMITT_MSB _u(1) +#define PADS_QSPI_GPIO_QSPI_SCLK_SCHMITT_LSB _u(1) +#define PADS_QSPI_GPIO_QSPI_SCLK_SCHMITT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_QSPI_GPIO_QSPI_SCLK_SLEWFAST +// Description : Slew rate control. 1 = Fast, 0 = Slow +#define PADS_QSPI_GPIO_QSPI_SCLK_SLEWFAST_RESET _u(0x0) +#define PADS_QSPI_GPIO_QSPI_SCLK_SLEWFAST_BITS _u(0x00000001) +#define PADS_QSPI_GPIO_QSPI_SCLK_SLEWFAST_MSB _u(0) +#define PADS_QSPI_GPIO_QSPI_SCLK_SLEWFAST_LSB _u(0) +#define PADS_QSPI_GPIO_QSPI_SCLK_SLEWFAST_ACCESS "RW" +// ============================================================================= +// Register : PADS_QSPI_GPIO_QSPI_SD0 +// Description : Pad control register +#define PADS_QSPI_GPIO_QSPI_SD0_OFFSET _u(0x00000008) +#define PADS_QSPI_GPIO_QSPI_SD0_BITS _u(0x000000ff) +#define PADS_QSPI_GPIO_QSPI_SD0_RESET _u(0x00000052) +// ----------------------------------------------------------------------------- +// Field : PADS_QSPI_GPIO_QSPI_SD0_OD +// Description : Output disable. Has priority over output enable from +// peripherals +#define PADS_QSPI_GPIO_QSPI_SD0_OD_RESET _u(0x0) +#define PADS_QSPI_GPIO_QSPI_SD0_OD_BITS _u(0x00000080) +#define PADS_QSPI_GPIO_QSPI_SD0_OD_MSB _u(7) +#define PADS_QSPI_GPIO_QSPI_SD0_OD_LSB _u(7) +#define PADS_QSPI_GPIO_QSPI_SD0_OD_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_QSPI_GPIO_QSPI_SD0_IE +// Description : Input enable +#define PADS_QSPI_GPIO_QSPI_SD0_IE_RESET _u(0x1) +#define PADS_QSPI_GPIO_QSPI_SD0_IE_BITS _u(0x00000040) +#define PADS_QSPI_GPIO_QSPI_SD0_IE_MSB _u(6) +#define PADS_QSPI_GPIO_QSPI_SD0_IE_LSB _u(6) +#define PADS_QSPI_GPIO_QSPI_SD0_IE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_QSPI_GPIO_QSPI_SD0_DRIVE +// Description : Drive strength. +// 0x0 -> 2mA +// 0x1 -> 4mA +// 0x2 -> 8mA +// 0x3 -> 12mA +#define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_RESET _u(0x1) +#define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_BITS _u(0x00000030) +#define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_MSB _u(5) +#define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_LSB _u(4) +#define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_ACCESS "RW" +#define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_VALUE_2MA _u(0x0) +#define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_VALUE_4MA _u(0x1) +#define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_VALUE_8MA _u(0x2) +#define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_VALUE_12MA _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PADS_QSPI_GPIO_QSPI_SD0_PUE +// Description : Pull up enable +#define PADS_QSPI_GPIO_QSPI_SD0_PUE_RESET _u(0x0) +#define PADS_QSPI_GPIO_QSPI_SD0_PUE_BITS _u(0x00000008) +#define PADS_QSPI_GPIO_QSPI_SD0_PUE_MSB _u(3) +#define PADS_QSPI_GPIO_QSPI_SD0_PUE_LSB _u(3) +#define PADS_QSPI_GPIO_QSPI_SD0_PUE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_QSPI_GPIO_QSPI_SD0_PDE +// Description : Pull down enable +#define PADS_QSPI_GPIO_QSPI_SD0_PDE_RESET _u(0x0) +#define PADS_QSPI_GPIO_QSPI_SD0_PDE_BITS _u(0x00000004) +#define PADS_QSPI_GPIO_QSPI_SD0_PDE_MSB _u(2) +#define PADS_QSPI_GPIO_QSPI_SD0_PDE_LSB _u(2) +#define PADS_QSPI_GPIO_QSPI_SD0_PDE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_QSPI_GPIO_QSPI_SD0_SCHMITT +// Description : Enable schmitt trigger +#define PADS_QSPI_GPIO_QSPI_SD0_SCHMITT_RESET _u(0x1) +#define PADS_QSPI_GPIO_QSPI_SD0_SCHMITT_BITS _u(0x00000002) +#define PADS_QSPI_GPIO_QSPI_SD0_SCHMITT_MSB _u(1) +#define PADS_QSPI_GPIO_QSPI_SD0_SCHMITT_LSB _u(1) +#define PADS_QSPI_GPIO_QSPI_SD0_SCHMITT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_QSPI_GPIO_QSPI_SD0_SLEWFAST +// Description : Slew rate control. 1 = Fast, 0 = Slow +#define PADS_QSPI_GPIO_QSPI_SD0_SLEWFAST_RESET _u(0x0) +#define PADS_QSPI_GPIO_QSPI_SD0_SLEWFAST_BITS _u(0x00000001) +#define PADS_QSPI_GPIO_QSPI_SD0_SLEWFAST_MSB _u(0) +#define PADS_QSPI_GPIO_QSPI_SD0_SLEWFAST_LSB _u(0) +#define PADS_QSPI_GPIO_QSPI_SD0_SLEWFAST_ACCESS "RW" +// ============================================================================= +// Register : PADS_QSPI_GPIO_QSPI_SD1 +// Description : Pad control register +#define PADS_QSPI_GPIO_QSPI_SD1_OFFSET _u(0x0000000c) +#define PADS_QSPI_GPIO_QSPI_SD1_BITS _u(0x000000ff) +#define PADS_QSPI_GPIO_QSPI_SD1_RESET _u(0x00000052) +// ----------------------------------------------------------------------------- +// Field : PADS_QSPI_GPIO_QSPI_SD1_OD +// Description : Output disable. Has priority over output enable from +// peripherals +#define PADS_QSPI_GPIO_QSPI_SD1_OD_RESET _u(0x0) +#define PADS_QSPI_GPIO_QSPI_SD1_OD_BITS _u(0x00000080) +#define PADS_QSPI_GPIO_QSPI_SD1_OD_MSB _u(7) +#define PADS_QSPI_GPIO_QSPI_SD1_OD_LSB _u(7) +#define PADS_QSPI_GPIO_QSPI_SD1_OD_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_QSPI_GPIO_QSPI_SD1_IE +// Description : Input enable +#define PADS_QSPI_GPIO_QSPI_SD1_IE_RESET _u(0x1) +#define PADS_QSPI_GPIO_QSPI_SD1_IE_BITS _u(0x00000040) +#define PADS_QSPI_GPIO_QSPI_SD1_IE_MSB _u(6) +#define PADS_QSPI_GPIO_QSPI_SD1_IE_LSB _u(6) +#define PADS_QSPI_GPIO_QSPI_SD1_IE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_QSPI_GPIO_QSPI_SD1_DRIVE +// Description : Drive strength. +// 0x0 -> 2mA +// 0x1 -> 4mA +// 0x2 -> 8mA +// 0x3 -> 12mA +#define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_RESET _u(0x1) +#define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_BITS _u(0x00000030) +#define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_MSB _u(5) +#define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_LSB _u(4) +#define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_ACCESS "RW" +#define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_VALUE_2MA _u(0x0) +#define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_VALUE_4MA _u(0x1) +#define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_VALUE_8MA _u(0x2) +#define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_VALUE_12MA _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PADS_QSPI_GPIO_QSPI_SD1_PUE +// Description : Pull up enable +#define PADS_QSPI_GPIO_QSPI_SD1_PUE_RESET _u(0x0) +#define PADS_QSPI_GPIO_QSPI_SD1_PUE_BITS _u(0x00000008) +#define PADS_QSPI_GPIO_QSPI_SD1_PUE_MSB _u(3) +#define PADS_QSPI_GPIO_QSPI_SD1_PUE_LSB _u(3) +#define PADS_QSPI_GPIO_QSPI_SD1_PUE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_QSPI_GPIO_QSPI_SD1_PDE +// Description : Pull down enable +#define PADS_QSPI_GPIO_QSPI_SD1_PDE_RESET _u(0x0) +#define PADS_QSPI_GPIO_QSPI_SD1_PDE_BITS _u(0x00000004) +#define PADS_QSPI_GPIO_QSPI_SD1_PDE_MSB _u(2) +#define PADS_QSPI_GPIO_QSPI_SD1_PDE_LSB _u(2) +#define PADS_QSPI_GPIO_QSPI_SD1_PDE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_QSPI_GPIO_QSPI_SD1_SCHMITT +// Description : Enable schmitt trigger +#define PADS_QSPI_GPIO_QSPI_SD1_SCHMITT_RESET _u(0x1) +#define PADS_QSPI_GPIO_QSPI_SD1_SCHMITT_BITS _u(0x00000002) +#define PADS_QSPI_GPIO_QSPI_SD1_SCHMITT_MSB _u(1) +#define PADS_QSPI_GPIO_QSPI_SD1_SCHMITT_LSB _u(1) +#define PADS_QSPI_GPIO_QSPI_SD1_SCHMITT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_QSPI_GPIO_QSPI_SD1_SLEWFAST +// Description : Slew rate control. 1 = Fast, 0 = Slow +#define PADS_QSPI_GPIO_QSPI_SD1_SLEWFAST_RESET _u(0x0) +#define PADS_QSPI_GPIO_QSPI_SD1_SLEWFAST_BITS _u(0x00000001) +#define PADS_QSPI_GPIO_QSPI_SD1_SLEWFAST_MSB _u(0) +#define PADS_QSPI_GPIO_QSPI_SD1_SLEWFAST_LSB _u(0) +#define PADS_QSPI_GPIO_QSPI_SD1_SLEWFAST_ACCESS "RW" +// ============================================================================= +// Register : PADS_QSPI_GPIO_QSPI_SD2 +// Description : Pad control register +#define PADS_QSPI_GPIO_QSPI_SD2_OFFSET _u(0x00000010) +#define PADS_QSPI_GPIO_QSPI_SD2_BITS _u(0x000000ff) +#define PADS_QSPI_GPIO_QSPI_SD2_RESET _u(0x00000052) +// ----------------------------------------------------------------------------- +// Field : PADS_QSPI_GPIO_QSPI_SD2_OD +// Description : Output disable. Has priority over output enable from +// peripherals +#define PADS_QSPI_GPIO_QSPI_SD2_OD_RESET _u(0x0) +#define PADS_QSPI_GPIO_QSPI_SD2_OD_BITS _u(0x00000080) +#define PADS_QSPI_GPIO_QSPI_SD2_OD_MSB _u(7) +#define PADS_QSPI_GPIO_QSPI_SD2_OD_LSB _u(7) +#define PADS_QSPI_GPIO_QSPI_SD2_OD_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_QSPI_GPIO_QSPI_SD2_IE +// Description : Input enable +#define PADS_QSPI_GPIO_QSPI_SD2_IE_RESET _u(0x1) +#define PADS_QSPI_GPIO_QSPI_SD2_IE_BITS _u(0x00000040) +#define PADS_QSPI_GPIO_QSPI_SD2_IE_MSB _u(6) +#define PADS_QSPI_GPIO_QSPI_SD2_IE_LSB _u(6) +#define PADS_QSPI_GPIO_QSPI_SD2_IE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_QSPI_GPIO_QSPI_SD2_DRIVE +// Description : Drive strength. +// 0x0 -> 2mA +// 0x1 -> 4mA +// 0x2 -> 8mA +// 0x3 -> 12mA +#define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_RESET _u(0x1) +#define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_BITS _u(0x00000030) +#define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_MSB _u(5) +#define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_LSB _u(4) +#define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_ACCESS "RW" +#define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_VALUE_2MA _u(0x0) +#define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_VALUE_4MA _u(0x1) +#define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_VALUE_8MA _u(0x2) +#define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_VALUE_12MA _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PADS_QSPI_GPIO_QSPI_SD2_PUE +// Description : Pull up enable +#define PADS_QSPI_GPIO_QSPI_SD2_PUE_RESET _u(0x0) +#define PADS_QSPI_GPIO_QSPI_SD2_PUE_BITS _u(0x00000008) +#define PADS_QSPI_GPIO_QSPI_SD2_PUE_MSB _u(3) +#define PADS_QSPI_GPIO_QSPI_SD2_PUE_LSB _u(3) +#define PADS_QSPI_GPIO_QSPI_SD2_PUE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_QSPI_GPIO_QSPI_SD2_PDE +// Description : Pull down enable +#define PADS_QSPI_GPIO_QSPI_SD2_PDE_RESET _u(0x0) +#define PADS_QSPI_GPIO_QSPI_SD2_PDE_BITS _u(0x00000004) +#define PADS_QSPI_GPIO_QSPI_SD2_PDE_MSB _u(2) +#define PADS_QSPI_GPIO_QSPI_SD2_PDE_LSB _u(2) +#define PADS_QSPI_GPIO_QSPI_SD2_PDE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_QSPI_GPIO_QSPI_SD2_SCHMITT +// Description : Enable schmitt trigger +#define PADS_QSPI_GPIO_QSPI_SD2_SCHMITT_RESET _u(0x1) +#define PADS_QSPI_GPIO_QSPI_SD2_SCHMITT_BITS _u(0x00000002) +#define PADS_QSPI_GPIO_QSPI_SD2_SCHMITT_MSB _u(1) +#define PADS_QSPI_GPIO_QSPI_SD2_SCHMITT_LSB _u(1) +#define PADS_QSPI_GPIO_QSPI_SD2_SCHMITT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_QSPI_GPIO_QSPI_SD2_SLEWFAST +// Description : Slew rate control. 1 = Fast, 0 = Slow +#define PADS_QSPI_GPIO_QSPI_SD2_SLEWFAST_RESET _u(0x0) +#define PADS_QSPI_GPIO_QSPI_SD2_SLEWFAST_BITS _u(0x00000001) +#define PADS_QSPI_GPIO_QSPI_SD2_SLEWFAST_MSB _u(0) +#define PADS_QSPI_GPIO_QSPI_SD2_SLEWFAST_LSB _u(0) +#define PADS_QSPI_GPIO_QSPI_SD2_SLEWFAST_ACCESS "RW" +// ============================================================================= +// Register : PADS_QSPI_GPIO_QSPI_SD3 +// Description : Pad control register +#define PADS_QSPI_GPIO_QSPI_SD3_OFFSET _u(0x00000014) +#define PADS_QSPI_GPIO_QSPI_SD3_BITS _u(0x000000ff) +#define PADS_QSPI_GPIO_QSPI_SD3_RESET _u(0x00000052) +// ----------------------------------------------------------------------------- +// Field : PADS_QSPI_GPIO_QSPI_SD3_OD +// Description : Output disable. Has priority over output enable from +// peripherals +#define PADS_QSPI_GPIO_QSPI_SD3_OD_RESET _u(0x0) +#define PADS_QSPI_GPIO_QSPI_SD3_OD_BITS _u(0x00000080) +#define PADS_QSPI_GPIO_QSPI_SD3_OD_MSB _u(7) +#define PADS_QSPI_GPIO_QSPI_SD3_OD_LSB _u(7) +#define PADS_QSPI_GPIO_QSPI_SD3_OD_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_QSPI_GPIO_QSPI_SD3_IE +// Description : Input enable +#define PADS_QSPI_GPIO_QSPI_SD3_IE_RESET _u(0x1) +#define PADS_QSPI_GPIO_QSPI_SD3_IE_BITS _u(0x00000040) +#define PADS_QSPI_GPIO_QSPI_SD3_IE_MSB _u(6) +#define PADS_QSPI_GPIO_QSPI_SD3_IE_LSB _u(6) +#define PADS_QSPI_GPIO_QSPI_SD3_IE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_QSPI_GPIO_QSPI_SD3_DRIVE +// Description : Drive strength. +// 0x0 -> 2mA +// 0x1 -> 4mA +// 0x2 -> 8mA +// 0x3 -> 12mA +#define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_RESET _u(0x1) +#define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_BITS _u(0x00000030) +#define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_MSB _u(5) +#define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_LSB _u(4) +#define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_ACCESS "RW" +#define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_VALUE_2MA _u(0x0) +#define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_VALUE_4MA _u(0x1) +#define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_VALUE_8MA _u(0x2) +#define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_VALUE_12MA _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PADS_QSPI_GPIO_QSPI_SD3_PUE +// Description : Pull up enable +#define PADS_QSPI_GPIO_QSPI_SD3_PUE_RESET _u(0x0) +#define PADS_QSPI_GPIO_QSPI_SD3_PUE_BITS _u(0x00000008) +#define PADS_QSPI_GPIO_QSPI_SD3_PUE_MSB _u(3) +#define PADS_QSPI_GPIO_QSPI_SD3_PUE_LSB _u(3) +#define PADS_QSPI_GPIO_QSPI_SD3_PUE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_QSPI_GPIO_QSPI_SD3_PDE +// Description : Pull down enable +#define PADS_QSPI_GPIO_QSPI_SD3_PDE_RESET _u(0x0) +#define PADS_QSPI_GPIO_QSPI_SD3_PDE_BITS _u(0x00000004) +#define PADS_QSPI_GPIO_QSPI_SD3_PDE_MSB _u(2) +#define PADS_QSPI_GPIO_QSPI_SD3_PDE_LSB _u(2) +#define PADS_QSPI_GPIO_QSPI_SD3_PDE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_QSPI_GPIO_QSPI_SD3_SCHMITT +// Description : Enable schmitt trigger +#define PADS_QSPI_GPIO_QSPI_SD3_SCHMITT_RESET _u(0x1) +#define PADS_QSPI_GPIO_QSPI_SD3_SCHMITT_BITS _u(0x00000002) +#define PADS_QSPI_GPIO_QSPI_SD3_SCHMITT_MSB _u(1) +#define PADS_QSPI_GPIO_QSPI_SD3_SCHMITT_LSB _u(1) +#define PADS_QSPI_GPIO_QSPI_SD3_SCHMITT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_QSPI_GPIO_QSPI_SD3_SLEWFAST +// Description : Slew rate control. 1 = Fast, 0 = Slow +#define PADS_QSPI_GPIO_QSPI_SD3_SLEWFAST_RESET _u(0x0) +#define PADS_QSPI_GPIO_QSPI_SD3_SLEWFAST_BITS _u(0x00000001) +#define PADS_QSPI_GPIO_QSPI_SD3_SLEWFAST_MSB _u(0) +#define PADS_QSPI_GPIO_QSPI_SD3_SLEWFAST_LSB _u(0) +#define PADS_QSPI_GPIO_QSPI_SD3_SLEWFAST_ACCESS "RW" +// ============================================================================= +// Register : PADS_QSPI_GPIO_QSPI_SS +// Description : Pad control register +#define PADS_QSPI_GPIO_QSPI_SS_OFFSET _u(0x00000018) +#define PADS_QSPI_GPIO_QSPI_SS_BITS _u(0x000000ff) +#define PADS_QSPI_GPIO_QSPI_SS_RESET _u(0x0000005a) +// ----------------------------------------------------------------------------- +// Field : PADS_QSPI_GPIO_QSPI_SS_OD +// Description : Output disable. Has priority over output enable from +// peripherals +#define PADS_QSPI_GPIO_QSPI_SS_OD_RESET _u(0x0) +#define PADS_QSPI_GPIO_QSPI_SS_OD_BITS _u(0x00000080) +#define PADS_QSPI_GPIO_QSPI_SS_OD_MSB _u(7) +#define PADS_QSPI_GPIO_QSPI_SS_OD_LSB _u(7) +#define PADS_QSPI_GPIO_QSPI_SS_OD_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_QSPI_GPIO_QSPI_SS_IE +// Description : Input enable +#define PADS_QSPI_GPIO_QSPI_SS_IE_RESET _u(0x1) +#define PADS_QSPI_GPIO_QSPI_SS_IE_BITS _u(0x00000040) +#define PADS_QSPI_GPIO_QSPI_SS_IE_MSB _u(6) +#define PADS_QSPI_GPIO_QSPI_SS_IE_LSB _u(6) +#define PADS_QSPI_GPIO_QSPI_SS_IE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_QSPI_GPIO_QSPI_SS_DRIVE +// Description : Drive strength. +// 0x0 -> 2mA +// 0x1 -> 4mA +// 0x2 -> 8mA +// 0x3 -> 12mA +#define PADS_QSPI_GPIO_QSPI_SS_DRIVE_RESET _u(0x1) +#define PADS_QSPI_GPIO_QSPI_SS_DRIVE_BITS _u(0x00000030) +#define PADS_QSPI_GPIO_QSPI_SS_DRIVE_MSB _u(5) +#define PADS_QSPI_GPIO_QSPI_SS_DRIVE_LSB _u(4) +#define PADS_QSPI_GPIO_QSPI_SS_DRIVE_ACCESS "RW" +#define PADS_QSPI_GPIO_QSPI_SS_DRIVE_VALUE_2MA _u(0x0) +#define PADS_QSPI_GPIO_QSPI_SS_DRIVE_VALUE_4MA _u(0x1) +#define PADS_QSPI_GPIO_QSPI_SS_DRIVE_VALUE_8MA _u(0x2) +#define PADS_QSPI_GPIO_QSPI_SS_DRIVE_VALUE_12MA _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PADS_QSPI_GPIO_QSPI_SS_PUE +// Description : Pull up enable +#define PADS_QSPI_GPIO_QSPI_SS_PUE_RESET _u(0x1) +#define PADS_QSPI_GPIO_QSPI_SS_PUE_BITS _u(0x00000008) +#define PADS_QSPI_GPIO_QSPI_SS_PUE_MSB _u(3) +#define PADS_QSPI_GPIO_QSPI_SS_PUE_LSB _u(3) +#define PADS_QSPI_GPIO_QSPI_SS_PUE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_QSPI_GPIO_QSPI_SS_PDE +// Description : Pull down enable +#define PADS_QSPI_GPIO_QSPI_SS_PDE_RESET _u(0x0) +#define PADS_QSPI_GPIO_QSPI_SS_PDE_BITS _u(0x00000004) +#define PADS_QSPI_GPIO_QSPI_SS_PDE_MSB _u(2) +#define PADS_QSPI_GPIO_QSPI_SS_PDE_LSB _u(2) +#define PADS_QSPI_GPIO_QSPI_SS_PDE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_QSPI_GPIO_QSPI_SS_SCHMITT +// Description : Enable schmitt trigger +#define PADS_QSPI_GPIO_QSPI_SS_SCHMITT_RESET _u(0x1) +#define PADS_QSPI_GPIO_QSPI_SS_SCHMITT_BITS _u(0x00000002) +#define PADS_QSPI_GPIO_QSPI_SS_SCHMITT_MSB _u(1) +#define PADS_QSPI_GPIO_QSPI_SS_SCHMITT_LSB _u(1) +#define PADS_QSPI_GPIO_QSPI_SS_SCHMITT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_QSPI_GPIO_QSPI_SS_SLEWFAST +// Description : Slew rate control. 1 = Fast, 0 = Slow +#define PADS_QSPI_GPIO_QSPI_SS_SLEWFAST_RESET _u(0x0) +#define PADS_QSPI_GPIO_QSPI_SS_SLEWFAST_BITS _u(0x00000001) +#define PADS_QSPI_GPIO_QSPI_SS_SLEWFAST_MSB _u(0) +#define PADS_QSPI_GPIO_QSPI_SS_SLEWFAST_LSB _u(0) +#define PADS_QSPI_GPIO_QSPI_SS_SLEWFAST_ACCESS "RW" +// ============================================================================= +#endif // HARDWARE_REGS_PADS_QSPI_DEFINED |