diff options
Diffstat (limited to 'lib/cmsis-stm32f1/source')
| -rw-r--r-- | lib/cmsis-stm32f1/source/startup_stm32f100xb.s | 422 | ||||
| -rw-r--r-- | lib/cmsis-stm32f1/source/startup_stm32f100xe.s | 464 | ||||
| -rw-r--r-- | lib/cmsis-stm32f1/source/startup_stm32f101x6.s | 337 | ||||
| -rw-r--r-- | lib/cmsis-stm32f1/source/startup_stm32f101xb.s | 353 | ||||
| -rw-r--r-- | lib/cmsis-stm32f1/source/startup_stm32f101xe.s | 438 | ||||
| -rw-r--r-- | lib/cmsis-stm32f1/source/startup_stm32f101xg.s | 454 | ||||
| -rw-r--r-- | lib/cmsis-stm32f1/source/startup_stm32f102x6.s | 345 | ||||
| -rw-r--r-- | lib/cmsis-stm32f1/source/startup_stm32f102xb.s | 361 | ||||
| -rw-r--r-- | lib/cmsis-stm32f1/source/startup_stm32f103x6.s | 363 | ||||
| -rw-r--r-- | lib/cmsis-stm32f1/source/startup_stm32f103xb.s | 379 | ||||
| -rw-r--r-- | lib/cmsis-stm32f1/source/startup_stm32f103xe.s | 485 | ||||
| -rw-r--r-- | lib/cmsis-stm32f1/source/startup_stm32f103xg.s | 482 | ||||
| -rw-r--r-- | lib/cmsis-stm32f1/source/startup_stm32f105xc.s | 476 | ||||
| -rw-r--r-- | lib/cmsis-stm32f1/source/startup_stm32f107xc.s | 487 | ||||
| -rw-r--r-- | lib/cmsis-stm32f1/source/stm32f1.ld | 112 | ||||
| -rw-r--r-- | lib/cmsis-stm32f1/source/system_stm32f1xx.c | 448 |
16 files changed, 0 insertions, 6406 deletions
diff --git a/lib/cmsis-stm32f1/source/startup_stm32f100xb.s b/lib/cmsis-stm32f1/source/startup_stm32f100xb.s deleted file mode 100644 index fbf19b7c..00000000 --- a/lib/cmsis-stm32f1/source/startup_stm32f100xb.s +++ /dev/null @@ -1,422 +0,0 @@ -/**
- *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
- * @file startup_stm32f100xb.s
- * @author MCD Application Team
- * @version V4.2.0
- * @date 31-March-2017
- * @brief STM32F100xB Devices vector table for Atollic toolchain.
- * This module performs:
- * - Set the initial SP
- * - Set the initial PC == Reset_Handler,
- * - Set the vector table entries with the exceptions ISR address
- * - Configure the clock system
- * - Branches to main in the C library (which eventually
- * calls main()).
- * After Reset the Cortex-M3 processor is in Thread mode,
- * priority is Privileged, and the Stack is set to Main.
- ******************************************************************************
- *
- * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
- .syntax unified
- .cpu cortex-m3
- .fpu softvfp
- .thumb
-
-.global g_pfnVectors
-.global Default_Handler
-
-/* start address for the initialization values of the .data section.
-defined in linker script */
-.word _sidata
-/* start address for the .data section. defined in linker script */
-.word _sdata
-/* end address for the .data section. defined in linker script */
-.word _edata
-/* start address for the .bss section. defined in linker script */
-.word _sbss
-/* end address for the .bss section. defined in linker script */
-.word _ebss
-
-.equ BootRAM, 0xF108F85F
-/**
- * @brief This is the code that gets called when the processor first
- * starts execution following a reset event. Only the absolutely
- * necessary set is performed, after which the application
- * supplied main() routine is called.
- * @param None
- * @retval : None
-*/
-
- .section .text.Reset_Handler
- .weak Reset_Handler
- .type Reset_Handler, %function
-Reset_Handler:
-
-/* Copy the data segment initializers from flash to SRAM */
- movs r1, #0
- b LoopCopyDataInit
-
-CopyDataInit:
- ldr r3, =_sidata
- ldr r3, [r3, r1]
- str r3, [r0, r1]
- adds r1, r1, #4
-
-LoopCopyDataInit:
- ldr r0, =_sdata
- ldr r3, =_edata
- adds r2, r0, r1
- cmp r2, r3
- bcc CopyDataInit
- ldr r2, =_sbss
- b LoopFillZerobss
-/* Zero fill the bss segment. */
-FillZerobss:
- movs r3, #0
- str r3, [r2], #4
-
-LoopFillZerobss:
- ldr r3, = _ebss
- cmp r2, r3
- bcc FillZerobss
-
-/* Call the clock system intitialization function.*/
- bl SystemInit
-/* Call static constructors */
- bl __libc_init_array
-/* Call the application's entry point.*/
- bl main
- bx lr
-.size Reset_Handler, .-Reset_Handler
-
-/**
- * @brief This is the code that gets called when the processor receives an
- * unexpected interrupt. This simply enters an infinite loop, preserving
- * the system state for examination by a debugger.
- *
- * @param None
- * @retval : None
-*/
- .section .text.Default_Handler,"ax",%progbits
-Default_Handler:
-Infinite_Loop:
- b Infinite_Loop
- .size Default_Handler, .-Default_Handler
-/******************************************************************************
-*
-* The minimal vector table for a Cortex M3. Note that the proper constructs
-* must be placed on this to ensure that it ends up at physical address
-* 0x0000.0000.
-*
-******************************************************************************/
- .section .isr_vector,"a",%progbits
- .type g_pfnVectors, %object
- .size g_pfnVectors, .-g_pfnVectors
-
-
-g_pfnVectors:
- .word _estack
- .word Reset_Handler
- .word NMI_Handler
- .word HardFault_Handler
- .word MemManage_Handler
- .word BusFault_Handler
- .word UsageFault_Handler
- .word 0
- .word 0
- .word 0
- .word 0
- .word SVC_Handler
- .word DebugMon_Handler
- .word 0
- .word PendSV_Handler
- .word SysTick_Handler
- .word WWDG_IRQHandler
- .word PVD_IRQHandler
- .word TAMPER_IRQHandler
- .word RTC_IRQHandler
- .word FLASH_IRQHandler
- .word RCC_IRQHandler
- .word EXTI0_IRQHandler
- .word EXTI1_IRQHandler
- .word EXTI2_IRQHandler
- .word EXTI3_IRQHandler
- .word EXTI4_IRQHandler
- .word DMA1_Channel1_IRQHandler
- .word DMA1_Channel2_IRQHandler
- .word DMA1_Channel3_IRQHandler
- .word DMA1_Channel4_IRQHandler
- .word DMA1_Channel5_IRQHandler
- .word DMA1_Channel6_IRQHandler
- .word DMA1_Channel7_IRQHandler
- .word ADC1_IRQHandler
- .word 0
- .word 0
- .word 0
- .word 0
- .word EXTI9_5_IRQHandler
- .word TIM1_BRK_TIM15_IRQHandler
- .word TIM1_UP_TIM16_IRQHandler
- .word TIM1_TRG_COM_TIM17_IRQHandler
- .word TIM1_CC_IRQHandler
- .word TIM2_IRQHandler
- .word TIM3_IRQHandler
- .word TIM4_IRQHandler
- .word I2C1_EV_IRQHandler
- .word I2C1_ER_IRQHandler
- .word I2C2_EV_IRQHandler
- .word I2C2_ER_IRQHandler
- .word SPI1_IRQHandler
- .word SPI2_IRQHandler
- .word USART1_IRQHandler
- .word USART2_IRQHandler
- .word USART3_IRQHandler
- .word EXTI15_10_IRQHandler
- .word RTC_Alarm_IRQHandler
- .word CEC_IRQHandler
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word TIM6_DAC_IRQHandler
- .word TIM7_IRQHandler
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word BootRAM /* @0x01CC. This is for boot in RAM mode for
- STM32F10xB Value Line devices. */
-
-/*******************************************************************************
-*
-* Provide weak aliases for each Exception handler to the Default_Handler.
-* As they are weak aliases, any function with the same name will override
-* this definition.
-*
-*******************************************************************************/
-
-
- .weak NMI_Handler
- .thumb_set NMI_Handler,Default_Handler
-
- .weak HardFault_Handler
- .thumb_set HardFault_Handler,Default_Handler
-
- .weak MemManage_Handler
- .thumb_set MemManage_Handler,Default_Handler
-
- .weak BusFault_Handler
- .thumb_set BusFault_Handler,Default_Handler
-
- .weak UsageFault_Handler
- .thumb_set UsageFault_Handler,Default_Handler
-
- .weak SVC_Handler
- .thumb_set SVC_Handler,Default_Handler
-
- .weak DebugMon_Handler
- .thumb_set DebugMon_Handler,Default_Handler
-
- .weak PendSV_Handler
- .thumb_set PendSV_Handler,Default_Handler
-
- .weak SysTick_Handler
- .thumb_set SysTick_Handler,Default_Handler
-
- .weak WWDG_IRQHandler
- .thumb_set WWDG_IRQHandler,Default_Handler
-
- .weak PVD_IRQHandler
- .thumb_set PVD_IRQHandler,Default_Handler
-
- .weak TAMPER_IRQHandler
- .thumb_set TAMPER_IRQHandler,Default_Handler
-
- .weak RTC_IRQHandler
- .thumb_set RTC_IRQHandler,Default_Handler
-
- .weak FLASH_IRQHandler
- .thumb_set FLASH_IRQHandler,Default_Handler
-
- .weak RCC_IRQHandler
- .thumb_set RCC_IRQHandler,Default_Handler
-
- .weak EXTI0_IRQHandler
- .thumb_set EXTI0_IRQHandler,Default_Handler
-
- .weak EXTI1_IRQHandler
- .thumb_set EXTI1_IRQHandler,Default_Handler
-
- .weak EXTI2_IRQHandler
- .thumb_set EXTI2_IRQHandler,Default_Handler
-
- .weak EXTI3_IRQHandler
- .thumb_set EXTI3_IRQHandler,Default_Handler
-
- .weak EXTI4_IRQHandler
- .thumb_set EXTI4_IRQHandler,Default_Handler
-
- .weak DMA1_Channel1_IRQHandler
- .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
-
- .weak DMA1_Channel2_IRQHandler
- .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
-
- .weak DMA1_Channel3_IRQHandler
- .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
-
- .weak DMA1_Channel4_IRQHandler
- .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
-
- .weak DMA1_Channel5_IRQHandler
- .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
-
- .weak DMA1_Channel6_IRQHandler
- .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
-
- .weak DMA1_Channel7_IRQHandler
- .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
-
- .weak ADC1_IRQHandler
- .thumb_set ADC1_IRQHandler,Default_Handler
-
- .weak EXTI9_5_IRQHandler
- .thumb_set EXTI9_5_IRQHandler,Default_Handler
-
- .weak TIM1_BRK_TIM15_IRQHandler
- .thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
-
- .weak TIM1_UP_TIM16_IRQHandler
- .thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
-
- .weak TIM1_TRG_COM_TIM17_IRQHandler
- .thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
-
- .weak TIM1_CC_IRQHandler
- .thumb_set TIM1_CC_IRQHandler,Default_Handler
-
- .weak TIM2_IRQHandler
- .thumb_set TIM2_IRQHandler,Default_Handler
-
- .weak TIM3_IRQHandler
- .thumb_set TIM3_IRQHandler,Default_Handler
-
- .weak TIM4_IRQHandler
- .thumb_set TIM4_IRQHandler,Default_Handler
-
- .weak I2C1_EV_IRQHandler
- .thumb_set I2C1_EV_IRQHandler,Default_Handler
-
- .weak I2C1_ER_IRQHandler
- .thumb_set I2C1_ER_IRQHandler,Default_Handler
-
- .weak I2C2_EV_IRQHandler
- .thumb_set I2C1_EV_IRQHandler,Default_Handler
-
- .weak I2C2_ER_IRQHandler
- .thumb_set I2C1_ER_IRQHandler,Default_Handler
-
- .weak SPI1_IRQHandler
- .thumb_set SPI1_IRQHandler,Default_Handler
-
- .weak SPI1_IRQHandler
- .thumb_set SPI2_IRQHandler,Default_Handler
-
- .weak USART1_IRQHandler
- .thumb_set USART1_IRQHandler,Default_Handler
-
- .weak USART2_IRQHandler
- .thumb_set USART2_IRQHandler,Default_Handler
-
- .weak USART3_IRQHandler
- .thumb_set USART3_IRQHandler,Default_Handler
-
- .weak EXTI15_10_IRQHandler
- .thumb_set EXTI15_10_IRQHandler,Default_Handler
-
- .weak RTC_Alarm_IRQHandler
- .thumb_set RTC_Alarm_IRQHandler,Default_Handler
-
- .weak CEC_IRQHandler
- .thumb_set CEC_IRQHandler,Default_Handler
-
- .weak TIM6_DAC_IRQHandler
- .thumb_set TIM6_DAC_IRQHandler,Default_Handler
-
- .weak TIM7_IRQHandler
- .thumb_set TIM7_IRQHandler,Default_Handler
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
diff --git a/lib/cmsis-stm32f1/source/startup_stm32f100xe.s b/lib/cmsis-stm32f1/source/startup_stm32f100xe.s deleted file mode 100644 index 1159ddf2..00000000 --- a/lib/cmsis-stm32f1/source/startup_stm32f100xe.s +++ /dev/null @@ -1,464 +0,0 @@ -/**
- *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
- * @file startup_stm32f100xe.s
- * @author MCD Application Team
- * @version V4.2.0
- * @date 31-March-2017
- * @brief STM32F100xE Devices vector table for Atollic toolchain.
- * This module performs:
- * - Set the initial SP
- * - Set the initial PC == Reset_Handler,
- * - Set the vector table entries with the exceptions ISR address
- * - Configure the clock system
- * - Branches to main in the C library (which eventually
- * calls main()).
- * After Reset the Cortex-M3 processor is in Thread mode,
- * priority is Privileged, and the Stack is set to Main.
- ******************************************************************************
- *
- * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
- .syntax unified
- .cpu cortex-m3
- .fpu softvfp
- .thumb
-
-.global g_pfnVectors
-.global Default_Handler
-
-/* start address for the initialization values of the .data section.
-defined in linker script */
-.word _sidata
-/* start address for the .data section. defined in linker script */
-.word _sdata
-/* end address for the .data section. defined in linker script */
-.word _edata
-/* start address for the .bss section. defined in linker script */
-.word _sbss
-/* end address for the .bss section. defined in linker script */
-.word _ebss
-
-.equ BootRAM, 0xF108F85F
-/**
- * @brief This is the code that gets called when the processor first
- * starts execution following a reset event. Only the absolutely
- * necessary set is performed, after which the application
- * supplied main() routine is called.
- * @param None
- * @retval : None
-*/
-
- .section .text.Reset_Handler
- .weak Reset_Handler
- .type Reset_Handler, %function
-Reset_Handler:
-
-/* Copy the data segment initializers from flash to SRAM */
- movs r1, #0
- b LoopCopyDataInit
-
-CopyDataInit:
- ldr r3, =_sidata
- ldr r3, [r3, r1]
- str r3, [r0, r1]
- adds r1, r1, #4
-
-LoopCopyDataInit:
- ldr r0, =_sdata
- ldr r3, =_edata
- adds r2, r0, r1
- cmp r2, r3
- bcc CopyDataInit
- ldr r2, =_sbss
- b LoopFillZerobss
-/* Zero fill the bss segment. */
-FillZerobss:
- movs r3, #0
- str r3, [r2], #4
-
-LoopFillZerobss:
- ldr r3, = _ebss
- cmp r2, r3
- bcc FillZerobss
-
-/* Call the clock system intitialization function.*/
- bl SystemInit
-/* Call static constructors */
- bl __libc_init_array
-/* Call the application's entry point.*/
- bl main
- bx lr
-.size Reset_Handler, .-Reset_Handler
-
-/**
- * @brief This is the code that gets called when the processor receives an
- * unexpected interrupt. This simply enters an infinite loop, preserving
- * the system state for examination by a debugger.
- *
- * @param None
- * @retval : None
-*/
- .section .text.Default_Handler,"ax",%progbits
-Default_Handler:
-Infinite_Loop:
- b Infinite_Loop
- .size Default_Handler, .-Default_Handler
-/******************************************************************************
-*
-* The minimal vector table for a Cortex M3. Note that the proper constructs
-* must be placed on this to ensure that it ends up at physical address
-* 0x0000.0000.
-*
-******************************************************************************/
- .section .isr_vector,"a",%progbits
- .type g_pfnVectors, %object
- .size g_pfnVectors, .-g_pfnVectors
-
-
-g_pfnVectors:
-
- .word _estack
- .word Reset_Handler
- .word NMI_Handler
- .word HardFault_Handler
- .word MemManage_Handler
- .word BusFault_Handler
- .word UsageFault_Handler
- .word 0
- .word 0
- .word 0
- .word 0
- .word SVC_Handler
- .word DebugMon_Handler
- .word 0
- .word PendSV_Handler
- .word SysTick_Handler
- .word WWDG_IRQHandler
- .word PVD_IRQHandler
- .word TAMPER_IRQHandler
- .word RTC_IRQHandler
- .word FLASH_IRQHandler
- .word RCC_IRQHandler
- .word EXTI0_IRQHandler
- .word EXTI1_IRQHandler
- .word EXTI2_IRQHandler
- .word EXTI3_IRQHandler
- .word EXTI4_IRQHandler
- .word DMA1_Channel1_IRQHandler
- .word DMA1_Channel2_IRQHandler
- .word DMA1_Channel3_IRQHandler
- .word DMA1_Channel4_IRQHandler
- .word DMA1_Channel5_IRQHandler
- .word DMA1_Channel6_IRQHandler
- .word DMA1_Channel7_IRQHandler
- .word ADC1_IRQHandler
- .word 0
- .word 0
- .word 0
- .word 0
- .word EXTI9_5_IRQHandler
- .word TIM1_BRK_TIM15_IRQHandler
- .word TIM1_UP_TIM16_IRQHandler
- .word TIM1_TRG_COM_TIM17_IRQHandler
- .word TIM1_CC_IRQHandler
- .word TIM2_IRQHandler
- .word TIM3_IRQHandler
- .word TIM4_IRQHandler
- .word I2C1_EV_IRQHandler
- .word I2C1_ER_IRQHandler
- .word I2C2_EV_IRQHandler
- .word I2C2_ER_IRQHandler
- .word SPI1_IRQHandler
- .word SPI2_IRQHandler
- .word USART1_IRQHandler
- .word USART2_IRQHandler
- .word USART3_IRQHandler
- .word EXTI15_10_IRQHandler
- .word RTC_Alarm_IRQHandler
- .word CEC_IRQHandler
- .word TIM12_IRQHandler
- .word TIM13_IRQHandler
- .word TIM14_IRQHandler
- .word 0
- .word 0
- .word 0
- .word 0
- .word TIM5_IRQHandler
- .word SPI3_IRQHandler
- .word UART4_IRQHandler
- .word UART5_IRQHandler
- .word TIM6_DAC_IRQHandler
- .word TIM7_IRQHandler
- .word DMA2_Channel1_IRQHandler
- .word DMA2_Channel2_IRQHandler
- .word DMA2_Channel3_IRQHandler
- .word DMA2_Channel4_5_IRQHandler
- .word DMA2_Channel5_IRQHandler
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word BootRAM /* @0x1E0. This is for boot in RAM mode for
- STM32F10x High Density Value line devices. */
-
-/*******************************************************************************
-*
-* Provide weak aliases for each Exception handler to the Default_Handler.
-* As they are weak aliases, any function with the same name will override
-* this definition.
-*
-*******************************************************************************/
-
-
- .weak NMI_Handler
- .thumb_set NMI_Handler,Default_Handler
-
- .weak HardFault_Handler
- .thumb_set HardFault_Handler,Default_Handler
-
- .weak MemManage_Handler
- .thumb_set MemManage_Handler,Default_Handler
-
- .weak BusFault_Handler
- .thumb_set BusFault_Handler,Default_Handler
-
- .weak UsageFault_Handler
- .thumb_set UsageFault_Handler,Default_Handler
-
- .weak SVC_Handler
- .thumb_set SVC_Handler,Default_Handler
-
- .weak DebugMon_Handler
- .thumb_set DebugMon_Handler,Default_Handler
-
- .weak PendSV_Handler
- .thumb_set PendSV_Handler,Default_Handler
-
- .weak SysTick_Handler
- .thumb_set SysTick_Handler,Default_Handler
-
- .weak WWDG_IRQHandler
- .thumb_set WWDG_IRQHandler,Default_Handler
-
- .weak PVD_IRQHandler
- .thumb_set PVD_IRQHandler,Default_Handler
-
- .weak TAMPER_IRQHandler
- .thumb_set TAMPER_IRQHandler,Default_Handler
-
- .weak RTC_IRQHandler
- .thumb_set RTC_IRQHandler,Default_Handler
-
- .weak FLASH_IRQHandler
- .thumb_set FLASH_IRQHandler,Default_Handler
-
- .weak RCC_IRQHandler
- .thumb_set RCC_IRQHandler,Default_Handler
-
- .weak EXTI0_IRQHandler
- .thumb_set EXTI0_IRQHandler,Default_Handler
-
- .weak EXTI1_IRQHandler
- .thumb_set EXTI1_IRQHandler,Default_Handler
-
- .weak EXTI2_IRQHandler
- .thumb_set EXTI2_IRQHandler,Default_Handler
-
- .weak EXTI3_IRQHandler
- .thumb_set EXTI3_IRQHandler,Default_Handler
-
- .weak EXTI4_IRQHandler
- .thumb_set EXTI4_IRQHandler,Default_Handler
-
- .weak DMA1_Channel1_IRQHandler
- .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
-
- .weak DMA1_Channel2_IRQHandler
- .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
-
- .weak DMA1_Channel3_IRQHandler
- .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
-
- .weak DMA1_Channel4_IRQHandler
- .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
-
- .weak DMA1_Channel5_IRQHandler
- .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
-
- .weak DMA1_Channel6_IRQHandler
- .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
-
- .weak DMA1_Channel7_IRQHandler
- .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
-
- .weak ADC1_IRQHandler
- .thumb_set ADC1_IRQHandler,Default_Handler
-
- .weak EXTI9_5_IRQHandler
- .thumb_set EXTI9_5_IRQHandler,Default_Handler
-
- .weak TIM1_BRK_TIM15_IRQHandler
- .thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
-
- .weak TIM1_UP_TIM16_IRQHandler
- .thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
-
- .weak TIM1_TRG_COM_TIM17_IRQHandler
- .thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
-
- .weak TIM1_CC_IRQHandler
- .thumb_set TIM1_CC_IRQHandler,Default_Handler
-
- .weak TIM2_IRQHandler
- .thumb_set TIM2_IRQHandler,Default_Handler
-
- .weak TIM3_IRQHandler
- .thumb_set TIM3_IRQHandler,Default_Handler
-
- .weak TIM4_IRQHandler
- .thumb_set TIM4_IRQHandler,Default_Handler
-
- .weak I2C1_EV_IRQHandler
- .thumb_set I2C1_EV_IRQHandler,Default_Handler
-
- .weak I2C1_ER_IRQHandler
- .thumb_set I2C1_ER_IRQHandler,Default_Handler
-
- .weak I2C2_EV_IRQHandler
- .thumb_set I2C2_EV_IRQHandler,Default_Handler
-
- .weak I2C2_ER_IRQHandler
- .thumb_set I2C2_ER_IRQHandler,Default_Handler
-
- .weak SPI1_IRQHandler
- .thumb_set SPI1_IRQHandler,Default_Handler
-
- .weak SPI2_IRQHandler
- .thumb_set SPI2_IRQHandler,Default_Handler
-
- .weak USART1_IRQHandler
- .thumb_set USART1_IRQHandler,Default_Handler
-
- .weak USART2_IRQHandler
- .thumb_set USART2_IRQHandler,Default_Handler
-
- .weak USART3_IRQHandler
- .thumb_set USART3_IRQHandler,Default_Handler
-
- .weak EXTI15_10_IRQHandler
- .thumb_set EXTI15_10_IRQHandler,Default_Handler
-
- .weak RTC_Alarm_IRQHandler
- .thumb_set RTC_Alarm_IRQHandler,Default_Handler
-
- .weak CEC_IRQHandler
- .thumb_set CEC_IRQHandler,Default_Handler
-
- .weak TIM12_IRQHandler
- .thumb_set TIM12_IRQHandler,Default_Handler
-
- .weak TIM13_IRQHandler
- .thumb_set TIM13_IRQHandler,Default_Handler
-
- .weak TIM14_IRQHandler
- .thumb_set TIM14_IRQHandler,Default_Handler
-
- .weak TIM5_IRQHandler
- .thumb_set TIM5_IRQHandler,Default_Handler
-
- .weak SPI3_IRQHandler
- .thumb_set SPI3_IRQHandler,Default_Handler
-
- .weak UART4_IRQHandler
- .thumb_set UART4_IRQHandler,Default_Handler
-
- .weak UART5_IRQHandler
- .thumb_set UART5_IRQHandler,Default_Handler
-
- .weak TIM6_DAC_IRQHandler
- .thumb_set TIM6_DAC_IRQHandler,Default_Handler
-
- .weak TIM7_IRQHandler
- .thumb_set TIM7_IRQHandler,Default_Handler
-
- .weak DMA2_Channel1_IRQHandler
- .thumb_set DMA2_Channel1_IRQHandler,Default_Handler
-
- .weak DMA2_Channel2_IRQHandler
- .thumb_set DMA2_Channel2_IRQHandler,Default_Handler
-
- .weak DMA2_Channel3_IRQHandler
- .thumb_set DMA2_Channel3_IRQHandler,Default_Handler
-
- .weak DMA2_Channel4_5_IRQHandler
- .thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
-
- .weak DMA2_Channel5_IRQHandler
- .thumb_set DMA2_Channel5_IRQHandler,Default_Handler
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
diff --git a/lib/cmsis-stm32f1/source/startup_stm32f101x6.s b/lib/cmsis-stm32f1/source/startup_stm32f101x6.s deleted file mode 100644 index 07915af4..00000000 --- a/lib/cmsis-stm32f1/source/startup_stm32f101x6.s +++ /dev/null @@ -1,337 +0,0 @@ -/**
- *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
- * @file startup_stm32f101x6.s
- * @author MCD Application Team
- * @version V4.2.0
- * @date 31-March-2017
- * @brief STM32F101x6 Devices vector table for Atollic toolchain.
- * This module performs:
- * - Set the initial SP
- * - Set the initial PC == Reset_Handler,
- * - Set the vector table entries with the exceptions ISR address
- * - Configure the clock system
- * - Branches to main in the C library (which eventually
- * calls main()).
- * After Reset the Cortex-M3 processor is in Thread mode,
- * priority is Privileged, and the Stack is set to Main.
- ******************************************************************************
- *
- * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
- .syntax unified
- .cpu cortex-m3
- .fpu softvfp
- .thumb
-
-.global g_pfnVectors
-.global Default_Handler
-
-/* start address for the initialization values of the .data section.
-defined in linker script */
-.word _sidata
-/* start address for the .data section. defined in linker script */
-.word _sdata
-/* end address for the .data section. defined in linker script */
-.word _edata
-/* start address for the .bss section. defined in linker script */
-.word _sbss
-/* end address for the .bss section. defined in linker script */
-.word _ebss
-
-.equ BootRAM, 0xF108F85F
-/**
- * @brief This is the code that gets called when the processor first
- * starts execution following a reset event. Only the absolutely
- * necessary set is performed, after which the application
- * supplied main() routine is called.
- * @param None
- * @retval : None
-*/
-
- .section .text.Reset_Handler
- .weak Reset_Handler
- .type Reset_Handler, %function
-Reset_Handler:
-
-/* Copy the data segment initializers from flash to SRAM */
- movs r1, #0
- b LoopCopyDataInit
-
-CopyDataInit:
- ldr r3, =_sidata
- ldr r3, [r3, r1]
- str r3, [r0, r1]
- adds r1, r1, #4
-
-LoopCopyDataInit:
- ldr r0, =_sdata
- ldr r3, =_edata
- adds r2, r0, r1
- cmp r2, r3
- bcc CopyDataInit
- ldr r2, =_sbss
- b LoopFillZerobss
-/* Zero fill the bss segment. */
-FillZerobss:
- movs r3, #0
- str r3, [r2], #4
-
-LoopFillZerobss:
- ldr r3, = _ebss
- cmp r2, r3
- bcc FillZerobss
-
-/* Call the clock system intitialization function.*/
- bl SystemInit
-/* Call static constructors */
- bl __libc_init_array
-/* Call the application's entry point.*/
- bl main
- bx lr
-.size Reset_Handler, .-Reset_Handler
-
-/**
- * @brief This is the code that gets called when the processor receives an
- * unexpected interrupt. This simply enters an infinite loop, preserving
- * the system state for examination by a debugger.
- *
- * @param None
- * @retval : None
-*/
- .section .text.Default_Handler,"ax",%progbits
-Default_Handler:
-Infinite_Loop:
- b Infinite_Loop
- .size Default_Handler, .-Default_Handler
-/******************************************************************************
-*
-* The minimal vector table for a Cortex M3. Note that the proper constructs
-* must be placed on this to ensure that it ends up at physical address
-* 0x0000.0000.
-*
-******************************************************************************/
- .section .isr_vector,"a",%progbits
- .type g_pfnVectors, %object
- .size g_pfnVectors, .-g_pfnVectors
-
-
-g_pfnVectors:
-
-
- .word _estack
- .word Reset_Handler
- .word NMI_Handler
- .word HardFault_Handler
- .word MemManage_Handler
- .word BusFault_Handler
- .word UsageFault_Handler
- .word 0
- .word 0
- .word 0
- .word 0
- .word SVC_Handler
- .word DebugMon_Handler
- .word 0
- .word PendSV_Handler
- .word SysTick_Handler
- .word WWDG_IRQHandler
- .word PVD_IRQHandler
- .word TAMPER_IRQHandler
- .word RTC_IRQHandler
- .word FLASH_IRQHandler
- .word RCC_IRQHandler
- .word EXTI0_IRQHandler
- .word EXTI1_IRQHandler
- .word EXTI2_IRQHandler
- .word EXTI3_IRQHandler
- .word EXTI4_IRQHandler
- .word DMA1_Channel1_IRQHandler
- .word DMA1_Channel2_IRQHandler
- .word DMA1_Channel3_IRQHandler
- .word DMA1_Channel4_IRQHandler
- .word DMA1_Channel5_IRQHandler
- .word DMA1_Channel6_IRQHandler
- .word DMA1_Channel7_IRQHandler
- .word ADC1_IRQHandler
- .word 0
- .word 0
- .word 0
- .word 0
- .word EXTI9_5_IRQHandler
- .word 0
- .word 0
- .word 0
- .word 0
- .word TIM2_IRQHandler
- .word TIM3_IRQHandler
- .word 0
- .word I2C1_EV_IRQHandler
- .word I2C1_ER_IRQHandler
- .word 0
- .word 0
- .word SPI1_IRQHandler
- .word 0
- .word USART1_IRQHandler
- .word USART2_IRQHandler
- .word 0
- .word EXTI15_10_IRQHandler
- .word RTC_Alarm_IRQHandler
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word BootRAM /* @0x108. This is for boot in RAM mode for
- STM32F10x Low Density devices.*/
-
-/*******************************************************************************
-*
-* Provide weak aliases for each Exception handler to the Default_Handler.
-* As they are weak aliases, any function with the same name will override
-* this definition.
-*
-*******************************************************************************/
-
- .weak NMI_Handler
- .thumb_set NMI_Handler,Default_Handler
-
- .weak HardFault_Handler
- .thumb_set HardFault_Handler,Default_Handler
-
- .weak MemManage_Handler
- .thumb_set MemManage_Handler,Default_Handler
-
- .weak BusFault_Handler
- .thumb_set BusFault_Handler,Default_Handler
-
- .weak UsageFault_Handler
- .thumb_set UsageFault_Handler,Default_Handler
-
- .weak SVC_Handler
- .thumb_set SVC_Handler,Default_Handler
-
- .weak DebugMon_Handler
- .thumb_set DebugMon_Handler,Default_Handler
-
- .weak PendSV_Handler
- .thumb_set PendSV_Handler,Default_Handler
-
- .weak SysTick_Handler
- .thumb_set SysTick_Handler,Default_Handler
-
- .weak WWDG_IRQHandler
- .thumb_set WWDG_IRQHandler,Default_Handler
-
- .weak PVD_IRQHandler
- .thumb_set PVD_IRQHandler,Default_Handler
-
- .weak TAMPER_IRQHandler
- .thumb_set TAMPER_IRQHandler,Default_Handler
-
- .weak RTC_IRQHandler
- .thumb_set RTC_IRQHandler,Default_Handler
-
- .weak FLASH_IRQHandler
- .thumb_set FLASH_IRQHandler,Default_Handler
-
- .weak RCC_IRQHandler
- .thumb_set RCC_IRQHandler,Default_Handler
-
- .weak EXTI0_IRQHandler
- .thumb_set EXTI0_IRQHandler,Default_Handler
-
- .weak EXTI1_IRQHandler
- .thumb_set EXTI1_IRQHandler,Default_Handler
-
- .weak EXTI2_IRQHandler
- .thumb_set EXTI2_IRQHandler,Default_Handler
-
- .weak EXTI3_IRQHandler
- .thumb_set EXTI3_IRQHandler,Default_Handler
-
- .weak EXTI4_IRQHandler
- .thumb_set EXTI4_IRQHandler,Default_Handler
-
- .weak DMA1_Channel1_IRQHandler
- .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
-
- .weak DMA1_Channel2_IRQHandler
- .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
-
- .weak DMA1_Channel3_IRQHandler
- .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
-
- .weak DMA1_Channel4_IRQHandler
- .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
-
- .weak DMA1_Channel5_IRQHandler
- .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
-
- .weak DMA1_Channel6_IRQHandler
- .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
-
- .weak DMA1_Channel7_IRQHandler
- .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
-
- .weak ADC1_IRQHandler
- .thumb_set ADC1_IRQHandler,Default_Handler
-
- .weak EXTI9_5_IRQHandler
- .thumb_set EXTI9_5_IRQHandler,Default_Handler
-
- .weak TIM2_IRQHandler
- .thumb_set TIM2_IRQHandler,Default_Handler
-
- .weak TIM3_IRQHandler
- .thumb_set TIM3_IRQHandler,Default_Handler
-
- .weak I2C1_EV_IRQHandler
- .thumb_set I2C1_EV_IRQHandler,Default_Handler
-
- .weak I2C1_ER_IRQHandler
- .thumb_set I2C1_ER_IRQHandler,Default_Handler
-
- .weak SPI1_IRQHandler
- .thumb_set SPI1_IRQHandler,Default_Handler
-
- .weak USART1_IRQHandler
- .thumb_set USART1_IRQHandler,Default_Handler
-
- .weak USART2_IRQHandler
- .thumb_set USART2_IRQHandler,Default_Handler
-
- .weak EXTI15_10_IRQHandler
- .thumb_set EXTI15_10_IRQHandler,Default_Handler
-
- .weak RTC_Alarm_IRQHandler
- .thumb_set RTC_Alarm_IRQHandler,Default_Handler
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/lib/cmsis-stm32f1/source/startup_stm32f101xb.s b/lib/cmsis-stm32f1/source/startup_stm32f101xb.s deleted file mode 100644 index 52b32970..00000000 --- a/lib/cmsis-stm32f1/source/startup_stm32f101xb.s +++ /dev/null @@ -1,353 +0,0 @@ -/**
- *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
- * @file startup_stm32f101xb.s
- * @author MCD Application Team
- * @version V4.2.0
- * @date 31-March-2017
- * @brief STM32F101xB Devices vector table for Atollic toolchain.
- * This module performs:
- * - Set the initial SP
- * - Set the initial PC == Reset_Handler,
- * - Set the vector table entries with the exceptions ISR address
- * - Configure the clock system
- * - Branches to main in the C library (which eventually
- * calls main()).
- * After Reset the Cortex-M3 processor is in Thread mode,
- * priority is Privileged, and the Stack is set to Main.
- ******************************************************************************
- *
- * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
- .syntax unified
- .cpu cortex-m3
- .fpu softvfp
- .thumb
-
-.global g_pfnVectors
-.global Default_Handler
-
-/* start address for the initialization values of the .data section.
-defined in linker script */
-.word _sidata
-/* start address for the .data section. defined in linker script */
-.word _sdata
-/* end address for the .data section. defined in linker script */
-.word _edata
-/* start address for the .bss section. defined in linker script */
-.word _sbss
-/* end address for the .bss section. defined in linker script */
-.word _ebss
-
-.equ BootRAM, 0xF108F85F
-/**
- * @brief This is the code that gets called when the processor first
- * starts execution following a reset event. Only the absolutely
- * necessary set is performed, after which the application
- * supplied main() routine is called.
- * @param None
- * @retval : None
-*/
-
- .section .text.Reset_Handler
- .weak Reset_Handler
- .type Reset_Handler, %function
-Reset_Handler:
-
-/* Copy the data segment initializers from flash to SRAM */
- movs r1, #0
- b LoopCopyDataInit
-
-CopyDataInit:
- ldr r3, =_sidata
- ldr r3, [r3, r1]
- str r3, [r0, r1]
- adds r1, r1, #4
-
-LoopCopyDataInit:
- ldr r0, =_sdata
- ldr r3, =_edata
- adds r2, r0, r1
- cmp r2, r3
- bcc CopyDataInit
- ldr r2, =_sbss
- b LoopFillZerobss
-/* Zero fill the bss segment. */
-FillZerobss:
- movs r3, #0
- str r3, [r2], #4
-
-LoopFillZerobss:
- ldr r3, = _ebss
- cmp r2, r3
- bcc FillZerobss
-
-/* Call the clock system intitialization function.*/
- bl SystemInit
-/* Call static constructors */
- bl __libc_init_array
-/* Call the application's entry point.*/
- bl main
- bx lr
-.size Reset_Handler, .-Reset_Handler
-
-/**
- * @brief This is the code that gets called when the processor receives an
- * unexpected interrupt. This simply enters an infinite loop, preserving
- * the system state for examination by a debugger.
- *
- * @param None
- * @retval : None
-*/
- .section .text.Default_Handler,"ax",%progbits
-Default_Handler:
-Infinite_Loop:
- b Infinite_Loop
- .size Default_Handler, .-Default_Handler
-/******************************************************************************
-*
-* The minimal vector table for a Cortex M3. Note that the proper constructs
-* must be placed on this to ensure that it ends up at physical address
-* 0x0000.0000.
-*
-******************************************************************************/
- .section .isr_vector,"a",%progbits
- .type g_pfnVectors, %object
- .size g_pfnVectors, .-g_pfnVectors
-
-
-g_pfnVectors:
-
- .word _estack
- .word Reset_Handler
- .word NMI_Handler
- .word HardFault_Handler
- .word MemManage_Handler
- .word BusFault_Handler
- .word UsageFault_Handler
- .word 0
- .word 0
- .word 0
- .word 0
- .word SVC_Handler
- .word DebugMon_Handler
- .word 0
- .word PendSV_Handler
- .word SysTick_Handler
- .word WWDG_IRQHandler
- .word PVD_IRQHandler
- .word TAMPER_IRQHandler
- .word RTC_IRQHandler
- .word FLASH_IRQHandler
- .word RCC_IRQHandler
- .word EXTI0_IRQHandler
- .word EXTI1_IRQHandler
- .word EXTI2_IRQHandler
- .word EXTI3_IRQHandler
- .word EXTI4_IRQHandler
- .word DMA1_Channel1_IRQHandler
- .word DMA1_Channel2_IRQHandler
- .word DMA1_Channel3_IRQHandler
- .word DMA1_Channel4_IRQHandler
- .word DMA1_Channel5_IRQHandler
- .word DMA1_Channel6_IRQHandler
- .word DMA1_Channel7_IRQHandler
- .word ADC1_IRQHandler
- .word 0
- .word 0
- .word 0
- .word 0
- .word EXTI9_5_IRQHandler
- .word 0
- .word 0
- .word 0
- .word 0
- .word TIM2_IRQHandler
- .word TIM3_IRQHandler
- .word TIM4_IRQHandler
- .word I2C1_EV_IRQHandler
- .word I2C1_ER_IRQHandler
- .word I2C2_EV_IRQHandler
- .word I2C2_ER_IRQHandler
- .word SPI1_IRQHandler
- .word SPI2_IRQHandler
- .word USART1_IRQHandler
- .word USART2_IRQHandler
- .word USART3_IRQHandler
- .word EXTI15_10_IRQHandler
- .word RTC_Alarm_IRQHandler
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word BootRAM /* @0x108. This is for boot in RAM mode for
- STM32F10x Medium Density devices. */
-
-/*******************************************************************************
-*
-* Provide weak aliases for each Exception handler to the Default_Handler.
-* As they are weak aliases, any function with the same name will override
-* this definition.
-*
-*******************************************************************************/
-
- .weak NMI_Handler
- .thumb_set NMI_Handler,Default_Handler
-
- .weak HardFault_Handler
- .thumb_set HardFault_Handler,Default_Handler
-
- .weak MemManage_Handler
- .thumb_set MemManage_Handler,Default_Handler
-
- .weak BusFault_Handler
- .thumb_set BusFault_Handler,Default_Handler
-
- .weak UsageFault_Handler
- .thumb_set UsageFault_Handler,Default_Handler
-
- .weak SVC_Handler
- .thumb_set SVC_Handler,Default_Handler
-
- .weak DebugMon_Handler
- .thumb_set DebugMon_Handler,Default_Handler
-
- .weak PendSV_Handler
- .thumb_set PendSV_Handler,Default_Handler
-
- .weak SysTick_Handler
- .thumb_set SysTick_Handler,Default_Handler
-
- .weak WWDG_IRQHandler
- .thumb_set WWDG_IRQHandler,Default_Handler
-
- .weak PVD_IRQHandler
- .thumb_set PVD_IRQHandler,Default_Handler
-
- .weak TAMPER_IRQHandler
- .thumb_set TAMPER_IRQHandler,Default_Handler
-
- .weak RTC_IRQHandler
- .thumb_set RTC_IRQHandler,Default_Handler
-
- .weak FLASH_IRQHandler
- .thumb_set FLASH_IRQHandler,Default_Handler
-
- .weak RCC_IRQHandler
- .thumb_set RCC_IRQHandler,Default_Handler
-
- .weak EXTI0_IRQHandler
- .thumb_set EXTI0_IRQHandler,Default_Handler
-
- .weak EXTI1_IRQHandler
- .thumb_set EXTI1_IRQHandler,Default_Handler
-
- .weak EXTI2_IRQHandler
- .thumb_set EXTI2_IRQHandler,Default_Handler
-
- .weak EXTI3_IRQHandler
- .thumb_set EXTI3_IRQHandler,Default_Handler
-
- .weak EXTI4_IRQHandler
- .thumb_set EXTI4_IRQHandler,Default_Handler
-
- .weak DMA1_Channel1_IRQHandler
- .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
-
- .weak DMA1_Channel2_IRQHandler
- .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
-
- .weak DMA1_Channel3_IRQHandler
- .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
-
- .weak DMA1_Channel4_IRQHandler
- .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
-
- .weak DMA1_Channel5_IRQHandler
- .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
-
- .weak DMA1_Channel6_IRQHandler
- .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
-
- .weak DMA1_Channel7_IRQHandler
- .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
-
- .weak ADC1_IRQHandler
- .thumb_set ADC1_IRQHandler,Default_Handler
-
- .weak EXTI9_5_IRQHandler
- .thumb_set EXTI9_5_IRQHandler,Default_Handler
-
- .weak TIM2_IRQHandler
- .thumb_set TIM2_IRQHandler,Default_Handler
-
- .weak TIM3_IRQHandler
- .thumb_set TIM3_IRQHandler,Default_Handler
-
- .weak TIM4_IRQHandler
- .thumb_set TIM4_IRQHandler,Default_Handler
-
- .weak I2C1_EV_IRQHandler
- .thumb_set I2C1_EV_IRQHandler,Default_Handler
-
- .weak I2C1_ER_IRQHandler
- .thumb_set I2C1_ER_IRQHandler,Default_Handler
-
- .weak I2C2_EV_IRQHandler
- .thumb_set I2C2_EV_IRQHandler,Default_Handler
-
- .weak I2C2_ER_IRQHandler
- .thumb_set I2C2_ER_IRQHandler,Default_Handler
-
- .weak SPI1_IRQHandler
- .thumb_set SPI1_IRQHandler,Default_Handler
-
- .weak SPI2_IRQHandler
- .thumb_set SPI2_IRQHandler,Default_Handler
-
- .weak USART1_IRQHandler
- .thumb_set USART1_IRQHandler,Default_Handler
-
- .weak USART2_IRQHandler
- .thumb_set USART2_IRQHandler,Default_Handler
-
- .weak USART3_IRQHandler
- .thumb_set USART3_IRQHandler,Default_Handler
-
- .weak EXTI15_10_IRQHandler
- .thumb_set EXTI15_10_IRQHandler,Default_Handler
-
- .weak RTC_Alarm_IRQHandler
- .thumb_set RTC_Alarm_IRQHandler,Default_Handler
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
diff --git a/lib/cmsis-stm32f1/source/startup_stm32f101xe.s b/lib/cmsis-stm32f1/source/startup_stm32f101xe.s deleted file mode 100644 index f4aefc20..00000000 --- a/lib/cmsis-stm32f1/source/startup_stm32f101xe.s +++ /dev/null @@ -1,438 +0,0 @@ -/**
- *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
- * @file startup_stm32f101xe.s
- * @author MCD Application Team
- * @version V4.2.0
- * @date 31-March-2017
- * @brief STM32F101xE Value Line Devices vector table for Atollic toolchain.
- * This module performs:
- * - Set the initial SP
- * - Set the initial PC == Reset_Handler,
- * - Set the vector table entries with the exceptions ISR address
- * - Configure the clock system
- * - Branches to main in the C library (which eventually
- * calls main()).
- * After Reset the Cortex-M3 processor is in Thread mode,
- * priority is Privileged, and the Stack is set to Main.
- ******************************************************************************
- *
- * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
- .syntax unified
- .cpu cortex-m3
- .fpu softvfp
- .thumb
-
-.global g_pfnVectors
-.global Default_Handler
-
-/* start address for the initialization values of the .data section.
-defined in linker script */
-.word _sidata
-/* start address for the .data section. defined in linker script */
-.word _sdata
-/* end address for the .data section. defined in linker script */
-.word _edata
-/* start address for the .bss section. defined in linker script */
-.word _sbss
-/* end address for the .bss section. defined in linker script */
-.word _ebss
-
-.equ BootRAM, 0xF1E0F85F
-/**
- * @brief This is the code that gets called when the processor first
- * starts execution following a reset event. Only the absolutely
- * necessary set is performed, after which the application
- * supplied main() routine is called.
- * @param None
- * @retval : None
-*/
-
- .section .text.Reset_Handler
- .weak Reset_Handler
- .type Reset_Handler, %function
-Reset_Handler:
-
-/* Copy the data segment initializers from flash to SRAM */
- movs r1, #0
- b LoopCopyDataInit
-
-CopyDataInit:
- ldr r3, =_sidata
- ldr r3, [r3, r1]
- str r3, [r0, r1]
- adds r1, r1, #4
-
-LoopCopyDataInit:
- ldr r0, =_sdata
- ldr r3, =_edata
- adds r2, r0, r1
- cmp r2, r3
- bcc CopyDataInit
- ldr r2, =_sbss
- b LoopFillZerobss
-/* Zero fill the bss segment. */
-FillZerobss:
- movs r3, #0
- str r3, [r2], #4
-
-LoopFillZerobss:
- ldr r3, = _ebss
- cmp r2, r3
- bcc FillZerobss
-
-/* Call the clock system intitialization function.*/
- bl SystemInit
-/* Call static constructors */
- bl __libc_init_array
-/* Call the application's entry point.*/
- bl main
- bx lr
-.size Reset_Handler, .-Reset_Handler
-
-/**
- * @brief This is the code that gets called when the processor receives an
- * unexpected interrupt. This simply enters an infinite loop, preserving
- * the system state for examination by a debugger.
- *
- * @param None
- * @retval : None
-*/
- .section .text.Default_Handler,"ax",%progbits
-Default_Handler:
-Infinite_Loop:
- b Infinite_Loop
- .size Default_Handler, .-Default_Handler
-/******************************************************************************
-*
-* The minimal vector table for a Cortex M3. Note that the proper constructs
-* must be placed on this to ensure that it ends up at physical address
-* 0x0000.0000.
-*
-******************************************************************************/
- .section .isr_vector,"a",%progbits
- .type g_pfnVectors, %object
- .size g_pfnVectors, .-g_pfnVectors
-
-
-g_pfnVectors:
-
- .word _estack
- .word Reset_Handler
- .word NMI_Handler
- .word HardFault_Handler
- .word MemManage_Handler
- .word BusFault_Handler
- .word UsageFault_Handler
- .word 0
- .word 0
- .word 0
- .word 0
- .word SVC_Handler
- .word DebugMon_Handler
- .word 0
- .word PendSV_Handler
- .word SysTick_Handler
- .word WWDG_IRQHandler
- .word PVD_IRQHandler
- .word TAMPER_IRQHandler
- .word RTC_IRQHandler
- .word FLASH_IRQHandler
- .word RCC_IRQHandler
- .word EXTI0_IRQHandler
- .word EXTI1_IRQHandler
- .word EXTI2_IRQHandler
- .word EXTI3_IRQHandler
- .word EXTI4_IRQHandler
- .word DMA1_Channel1_IRQHandler
- .word DMA1_Channel2_IRQHandler
- .word DMA1_Channel3_IRQHandler
- .word DMA1_Channel4_IRQHandler
- .word DMA1_Channel5_IRQHandler
- .word DMA1_Channel6_IRQHandler
- .word DMA1_Channel7_IRQHandler
- .word ADC1_IRQHandler
- .word 0
- .word 0
- .word 0
- .word 0
- .word EXTI9_5_IRQHandler
- .word 0
- .word 0
- .word 0
- .word 0
- .word TIM2_IRQHandler
- .word TIM3_IRQHandler
- .word TIM4_IRQHandler
- .word I2C1_EV_IRQHandler
- .word I2C1_ER_IRQHandler
- .word I2C2_EV_IRQHandler
- .word I2C2_ER_IRQHandler
- .word SPI1_IRQHandler
- .word SPI2_IRQHandler
- .word USART1_IRQHandler
- .word USART2_IRQHandler
- .word USART3_IRQHandler
- .word EXTI15_10_IRQHandler
- .word RTC_Alarm_IRQHandler
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word FSMC_IRQHandler
- .word 0
- .word TIM5_IRQHandler
- .word SPI3_IRQHandler
- .word UART4_IRQHandler
- .word UART5_IRQHandler
- .word TIM6_IRQHandler
- .word TIM7_IRQHandler
- .word DMA2_Channel1_IRQHandler
- .word DMA2_Channel2_IRQHandler
- .word DMA2_Channel3_IRQHandler
- .word DMA2_Channel4_5_IRQHandler
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word BootRAM /* @0x1E0. This is for boot in RAM mode for
- STM32F10x High Density devices. */
-
-/*******************************************************************************
-*
-* Provide weak aliases for each Exception handler to the Default_Handler.
-* As they are weak aliases, any function with the same name will override
-* this definition.
-*
-*******************************************************************************/
-
- .weak NMI_Handler
- .thumb_set NMI_Handler,Default_Handler
-
- .weak HardFault_Handler
- .thumb_set HardFault_Handler,Default_Handler
-
- .weak MemManage_Handler
- .thumb_set MemManage_Handler,Default_Handler
-
- .weak BusFault_Handler
- .thumb_set BusFault_Handler,Default_Handler
-
- .weak UsageFault_Handler
- .thumb_set UsageFault_Handler,Default_Handler
-
- .weak SVC_Handler
- .thumb_set SVC_Handler,Default_Handler
-
- .weak DebugMon_Handler
- .thumb_set DebugMon_Handler,Default_Handler
-
- .weak PendSV_Handler
- .thumb_set PendSV_Handler,Default_Handler
-
- .weak SysTick_Handler
- .thumb_set SysTick_Handler,Default_Handler
-
- .weak WWDG_IRQHandler
- .thumb_set WWDG_IRQHandler,Default_Handler
-
- .weak PVD_IRQHandler
- .thumb_set PVD_IRQHandler,Default_Handler
-
- .weak TAMPER_IRQHandler
- .thumb_set TAMPER_IRQHandler,Default_Handler
-
- .weak RTC_IRQHandler
- .thumb_set RTC_IRQHandler,Default_Handler
-
- .weak FLASH_IRQHandler
- .thumb_set FLASH_IRQHandler,Default_Handler
-
- .weak RCC_IRQHandler
- .thumb_set RCC_IRQHandler,Default_Handler
-
- .weak EXTI0_IRQHandler
- .thumb_set EXTI0_IRQHandler,Default_Handler
-
- .weak EXTI1_IRQHandler
- .thumb_set EXTI1_IRQHandler,Default_Handler
-
- .weak EXTI2_IRQHandler
- .thumb_set EXTI2_IRQHandler,Default_Handler
-
- .weak EXTI3_IRQHandler
- .thumb_set EXTI3_IRQHandler,Default_Handler
-
- .weak EXTI4_IRQHandler
- .thumb_set EXTI4_IRQHandler,Default_Handler
-
- .weak DMA1_Channel1_IRQHandler
- .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
-
- .weak DMA1_Channel2_IRQHandler
- .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
-
- .weak DMA1_Channel3_IRQHandler
- .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
-
- .weak DMA1_Channel4_IRQHandler
- .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
-
- .weak DMA1_Channel5_IRQHandler
- .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
-
- .weak DMA1_Channel6_IRQHandler
- .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
-
- .weak DMA1_Channel7_IRQHandler
- .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
-
- .weak ADC1_IRQHandler
- .thumb_set ADC1_IRQHandler,Default_Handler
-
- .weak EXTI9_5_IRQHandler
- .thumb_set EXTI9_5_IRQHandler,Default_Handler
-
- .weak TIM2_IRQHandler
- .thumb_set TIM2_IRQHandler,Default_Handler
-
- .weak TIM3_IRQHandler
- .thumb_set TIM3_IRQHandler,Default_Handler
-
- .weak TIM4_IRQHandler
- .thumb_set TIM4_IRQHandler,Default_Handler
-
- .weak I2C1_EV_IRQHandler
- .thumb_set I2C1_EV_IRQHandler,Default_Handler
-
- .weak I2C1_ER_IRQHandler
- .thumb_set I2C1_ER_IRQHandler,Default_Handler
-
- .weak I2C2_EV_IRQHandler
- .thumb_set I2C2_EV_IRQHandler,Default_Handler
-
- .weak I2C2_ER_IRQHandler
- .thumb_set I2C2_ER_IRQHandler,Default_Handler
-
- .weak SPI1_IRQHandler
- .thumb_set SPI1_IRQHandler,Default_Handler
-
- .weak SPI2_IRQHandler
- .thumb_set SPI2_IRQHandler,Default_Handler
-
- .weak USART1_IRQHandler
- .thumb_set USART1_IRQHandler,Default_Handler
-
- .weak USART2_IRQHandler
- .thumb_set USART2_IRQHandler,Default_Handler
-
- .weak USART3_IRQHandler
- .thumb_set USART3_IRQHandler,Default_Handler
-
- .weak EXTI15_10_IRQHandler
- .thumb_set EXTI15_10_IRQHandler,Default_Handler
-
- .weak RTC_Alarm_IRQHandler
- .thumb_set RTC_Alarm_IRQHandler,Default_Handler
-
- .weak FSMC_IRQHandler
- .thumb_set FSMC_IRQHandler,Default_Handler
-
- .weak TIM5_IRQHandler
- .thumb_set TIM5_IRQHandler,Default_Handler
-
- .weak SPI3_IRQHandler
- .thumb_set SPI3_IRQHandler,Default_Handler
-
- .weak UART4_IRQHandler
- .thumb_set UART4_IRQHandler,Default_Handler
-
- .weak UART5_IRQHandler
- .thumb_set UART5_IRQHandler,Default_Handler
-
- .weak TIM6_IRQHandler
- .thumb_set TIM6_IRQHandler,Default_Handler
-
- .weak TIM7_IRQHandler
- .thumb_set TIM7_IRQHandler,Default_Handler
-
- .weak DMA2_Channel1_IRQHandler
- .thumb_set DMA2_Channel1_IRQHandler,Default_Handler
-
- .weak DMA2_Channel2_IRQHandler
- .thumb_set DMA2_Channel2_IRQHandler,Default_Handler
-
- .weak DMA2_Channel3_IRQHandler
- .thumb_set DMA2_Channel3_IRQHandler,Default_Handler
-
- .weak DMA2_Channel4_5_IRQHandler
- .thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/lib/cmsis-stm32f1/source/startup_stm32f101xg.s b/lib/cmsis-stm32f1/source/startup_stm32f101xg.s deleted file mode 100644 index 7e79d0c8..00000000 --- a/lib/cmsis-stm32f1/source/startup_stm32f101xg.s +++ /dev/null @@ -1,454 +0,0 @@ -/**
- *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
- * @file startup_stm32f101xg.s
- * @author MCD Application Team
- * @version V4.2.0
- * @date 31-March-2017
- * @brief STM32F101xG Devices vector table for Atollic toolchain.
- * This module performs:
- * - Set the initial SP
- * - Set the initial PC == Reset_Handler,
- * - Set the vector table entries with the exceptions ISR address
- * - Configure the clock system
- * - Branches to main in the C library (which eventually
- * calls main()).
- * After Reset the Cortex-M3 processor is in Thread mode,
- * priority is Privileged, and the Stack is set to Main.
- ******************************************************************************
- *
- * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
- .syntax unified
- .cpu cortex-m3
- .fpu softvfp
- .thumb
-
-.global g_pfnVectors
-.global Default_Handler
-
-/* start address for the initialization values of the .data section.
-defined in linker script */
-.word _sidata
-/* start address for the .data section. defined in linker script */
-.word _sdata
-/* end address for the .data section. defined in linker script */
-.word _edata
-/* start address for the .bss section. defined in linker script */
-.word _sbss
-/* end address for the .bss section. defined in linker script */
-.word _ebss
-
-.equ BootRAM, 0xF1E0F85F
-/**
- * @brief This is the code that gets called when the processor first
- * starts execution following a reset event. Only the absolutely
- * necessary set is performed, after which the application
- * supplied main() routine is called.
- * @param None
- * @retval : None
-*/
-
- .section .text.Reset_Handler
- .weak Reset_Handler
- .type Reset_Handler, %function
-Reset_Handler:
-
-/* Copy the data segment initializers from flash to SRAM */
- movs r1, #0
- b LoopCopyDataInit
-
-CopyDataInit:
- ldr r3, =_sidata
- ldr r3, [r3, r1]
- str r3, [r0, r1]
- adds r1, r1, #4
-
-LoopCopyDataInit:
- ldr r0, =_sdata
- ldr r3, =_edata
- adds r2, r0, r1
- cmp r2, r3
- bcc CopyDataInit
- ldr r2, =_sbss
- b LoopFillZerobss
-/* Zero fill the bss segment. */
-FillZerobss:
- movs r3, #0
- str r3, [r2], #4
-
-LoopFillZerobss:
- ldr r3, = _ebss
- cmp r2, r3
- bcc FillZerobss
-
-/* Call the clock system intitialization function.*/
- bl SystemInit
-/* Call static constructors */
- bl __libc_init_array
-/* Call the application's entry point.*/
- bl main
- bx lr
-.size Reset_Handler, .-Reset_Handler
-
-/**
- * @brief This is the code that gets called when the processor receives an
- * unexpected interrupt. This simply enters an infinite loop, preserving
- * the system state for examination by a debugger.
- * @param None
- * @retval None
-*/
- .section .text.Default_Handler,"ax",%progbits
-Default_Handler:
-Infinite_Loop:
- b Infinite_Loop
- .size Default_Handler, .-Default_Handler
-/******************************************************************************
-*
-* The minimal vector table for a Cortex M3. Note that the proper constructs
-* must be placed on this to ensure that it ends up at physical address
-* 0x0000.0000.
-*
-******************************************************************************/
- .section .isr_vector,"a",%progbits
- .type g_pfnVectors, %object
- .size g_pfnVectors, .-g_pfnVectors
-
-
-g_pfnVectors:
-
- .word _estack
- .word Reset_Handler
- .word NMI_Handler
- .word HardFault_Handler
- .word MemManage_Handler
- .word BusFault_Handler
- .word UsageFault_Handler
- .word 0
- .word 0
- .word 0
- .word 0
- .word SVC_Handler
- .word DebugMon_Handler
- .word 0
- .word PendSV_Handler
- .word SysTick_Handler
- .word WWDG_IRQHandler
- .word PVD_IRQHandler
- .word TAMPER_IRQHandler
- .word RTC_IRQHandler
- .word FLASH_IRQHandler
- .word RCC_IRQHandler
- .word EXTI0_IRQHandler
- .word EXTI1_IRQHandler
- .word EXTI2_IRQHandler
- .word EXTI3_IRQHandler
- .word EXTI4_IRQHandler
- .word DMA1_Channel1_IRQHandler
- .word DMA1_Channel2_IRQHandler
- .word DMA1_Channel3_IRQHandler
- .word DMA1_Channel4_IRQHandler
- .word DMA1_Channel5_IRQHandler
- .word DMA1_Channel6_IRQHandler
- .word DMA1_Channel7_IRQHandler
- .word ADC1_2_IRQHandler
- .word 0
- .word 0
- .word 0
- .word 0
- .word EXTI9_5_IRQHandler
- .word TIM9_IRQHandler
- .word TIM10_IRQHandler
- .word TIM11_IRQHandler
- .word 0
- .word TIM2_IRQHandler
- .word TIM3_IRQHandler
- .word TIM4_IRQHandler
- .word I2C1_EV_IRQHandler
- .word I2C1_ER_IRQHandler
- .word I2C2_EV_IRQHandler
- .word I2C2_ER_IRQHandler
- .word SPI1_IRQHandler
- .word SPI2_IRQHandler
- .word USART1_IRQHandler
- .word USART2_IRQHandler
- .word USART3_IRQHandler
- .word EXTI15_10_IRQHandler
- .word RTC_Alarm_IRQHandler
- .word 0
- .word TIM12_IRQHandler
- .word TIM13_IRQHandler
- .word TIM14_IRQHandler
- .word 0
- .word 0
- .word FSMC_IRQHandler
- .word 0
- .word TIM5_IRQHandler
- .word SPI3_IRQHandler
- .word UART4_IRQHandler
- .word UART5_IRQHandler
- .word TIM6_IRQHandler
- .word TIM7_IRQHandler
- .word DMA2_Channel1_IRQHandler
- .word DMA2_Channel2_IRQHandler
- .word DMA2_Channel3_IRQHandler
- .word DMA2_Channel4_5_IRQHandler
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word BootRAM /* @0x1E0. This is for boot in RAM mode for
- STM32F10x XL-Density devices. */
-/*******************************************************************************
-*
-* Provide weak aliases for each Exception handler to the Default_Handler.
-* As they are weak aliases, any function with the same name will override
-* this definition.
-*
-*******************************************************************************/
-
- .weak NMI_Handler
- .thumb_set NMI_Handler,Default_Handler
-
- .weak HardFault_Handler
- .thumb_set HardFault_Handler,Default_Handler
-
- .weak MemManage_Handler
- .thumb_set MemManage_Handler,Default_Handler
-
- .weak BusFault_Handler
- .thumb_set BusFault_Handler,Default_Handler
-
- .weak UsageFault_Handler
- .thumb_set UsageFault_Handler,Default_Handler
-
- .weak SVC_Handler
- .thumb_set SVC_Handler,Default_Handler
-
- .weak DebugMon_Handler
- .thumb_set DebugMon_Handler,Default_Handler
-
- .weak PendSV_Handler
- .thumb_set PendSV_Handler,Default_Handler
-
- .weak SysTick_Handler
- .thumb_set SysTick_Handler,Default_Handler
-
- .weak WWDG_IRQHandler
- .thumb_set WWDG_IRQHandler,Default_Handler
-
- .weak PVD_IRQHandler
- .thumb_set PVD_IRQHandler,Default_Handler
-
- .weak TAMPER_IRQHandler
- .thumb_set TAMPER_IRQHandler,Default_Handler
-
- .weak RTC_IRQHandler
- .thumb_set RTC_IRQHandler,Default_Handler
-
- .weak FLASH_IRQHandler
- .thumb_set FLASH_IRQHandler,Default_Handler
-
- .weak RCC_IRQHandler
- .thumb_set RCC_IRQHandler,Default_Handler
-
- .weak EXTI0_IRQHandler
- .thumb_set EXTI0_IRQHandler,Default_Handler
-
- .weak EXTI1_IRQHandler
- .thumb_set EXTI1_IRQHandler,Default_Handler
-
- .weak EXTI2_IRQHandler
- .thumb_set EXTI2_IRQHandler,Default_Handler
-
- .weak EXTI3_IRQHandler
- .thumb_set EXTI3_IRQHandler,Default_Handler
-
- .weak EXTI4_IRQHandler
- .thumb_set EXTI4_IRQHandler,Default_Handler
-
- .weak DMA1_Channel1_IRQHandler
- .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
-
- .weak DMA1_Channel2_IRQHandler
- .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
-
- .weak DMA1_Channel3_IRQHandler
- .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
-
- .weak DMA1_Channel4_IRQHandler
- .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
-
- .weak DMA1_Channel5_IRQHandler
- .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
-
- .weak DMA1_Channel6_IRQHandler
- .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
-
- .weak DMA1_Channel7_IRQHandler
- .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
-
- .weak ADC1_2_IRQHandler
- .thumb_set ADC1_2_IRQHandler,Default_Handler
-
- .weak EXTI9_5_IRQHandler
- .thumb_set EXTI9_5_IRQHandler,Default_Handler
-
- .weak TIM9_IRQHandler
- .thumb_set TIM9_IRQHandler,Default_Handler
-
- .weak TIM10_IRQHandler
- .thumb_set TIM10_IRQHandler,Default_Handler
-
- .weak TIM11_IRQHandler
- .thumb_set TIM11_IRQHandler,Default_Handler
-
- .weak TIM2_IRQHandler
- .thumb_set TIM2_IRQHandler,Default_Handler
-
- .weak TIM3_IRQHandler
- .thumb_set TIM3_IRQHandler,Default_Handler
-
- .weak TIM4_IRQHandler
- .thumb_set TIM4_IRQHandler,Default_Handler
-
- .weak I2C1_EV_IRQHandler
- .thumb_set I2C1_EV_IRQHandler,Default_Handler
-
- .weak I2C1_ER_IRQHandler
- .thumb_set I2C1_ER_IRQHandler,Default_Handler
-
- .weak I2C2_EV_IRQHandler
- .thumb_set I2C2_EV_IRQHandler,Default_Handler
-
- .weak I2C2_ER_IRQHandler
- .thumb_set I2C2_ER_IRQHandler,Default_Handler
-
- .weak SPI1_IRQHandler
- .thumb_set SPI1_IRQHandler,Default_Handler
-
- .weak SPI2_IRQHandler
- .thumb_set SPI2_IRQHandler,Default_Handler
-
- .weak USART1_IRQHandler
- .thumb_set USART1_IRQHandler,Default_Handler
-
- .weak USART2_IRQHandler
- .thumb_set USART2_IRQHandler,Default_Handler
-
- .weak USART3_IRQHandler
- .thumb_set USART3_IRQHandler,Default_Handler
-
- .weak EXTI15_10_IRQHandler
- .thumb_set EXTI15_10_IRQHandler,Default_Handler
-
- .weak RTC_Alarm_IRQHandler
- .thumb_set RTC_Alarm_IRQHandler,Default_Handler
-
- .weak TIM12_IRQHandler
- .thumb_set TIM12_IRQHandler,Default_Handler
-
- .weak TIM13_IRQHandler
- .thumb_set TIM13_IRQHandler,Default_Handler
-
- .weak TIM14_IRQHandler
- .thumb_set TIM14_IRQHandler,Default_Handler
-
- .weak FSMC_IRQHandler
- .thumb_set FSMC_IRQHandler,Default_Handler
-
- .weak TIM5_IRQHandler
- .thumb_set TIM5_IRQHandler,Default_Handler
-
- .weak SPI3_IRQHandler
- .thumb_set SPI3_IRQHandler,Default_Handler
-
- .weak UART4_IRQHandler
- .thumb_set UART4_IRQHandler,Default_Handler
-
- .weak UART5_IRQHandler
- .thumb_set UART5_IRQHandler,Default_Handler
-
- .weak TIM6_IRQHandler
- .thumb_set TIM6_IRQHandler,Default_Handler
-
- .weak TIM7_IRQHandler
- .thumb_set TIM7_IRQHandler,Default_Handler
-
- .weak DMA2_Channel1_IRQHandler
- .thumb_set DMA2_Channel1_IRQHandler,Default_Handler
-
- .weak DMA2_Channel2_IRQHandler
- .thumb_set DMA2_Channel2_IRQHandler,Default_Handler
-
- .weak DMA2_Channel3_IRQHandler
- .thumb_set DMA2_Channel3_IRQHandler,Default_Handler
-
- .weak DMA2_Channel4_5_IRQHandler
- .thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/lib/cmsis-stm32f1/source/startup_stm32f102x6.s b/lib/cmsis-stm32f1/source/startup_stm32f102x6.s deleted file mode 100644 index 219c326b..00000000 --- a/lib/cmsis-stm32f1/source/startup_stm32f102x6.s +++ /dev/null @@ -1,345 +0,0 @@ -/**
- *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
- * @file startup_stm32f102x6.s
- * @author MCD Application Team
- * @version V4.2.0
- * @date 31-March-2017
- * @brief STM32F102x6 Devices vector table for Atollic toolchain.
- * This module performs:
- * - Set the initial SP
- * - Set the initial PC == Reset_Handler,
- * - Set the vector table entries with the exceptions ISR address
- * - Configure the clock system
- * - Branches to main in the C library (which eventually
- * calls main()).
- * After Reset the Cortex-M3 processor is in Thread mode,
- * priority is Privileged, and the Stack is set to Main.
- ******************************************************************************
- *
- * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
- .syntax unified
- .cpu cortex-m3
- .fpu softvfp
- .thumb
-
-.global g_pfnVectors
-.global Default_Handler
-
-/* start address for the initialization values of the .data section.
-defined in linker script */
-.word _sidata
-/* start address for the .data section. defined in linker script */
-.word _sdata
-/* end address for the .data section. defined in linker script */
-.word _edata
-/* start address for the .bss section. defined in linker script */
-.word _sbss
-/* end address for the .bss section. defined in linker script */
-.word _ebss
-
-.equ BootRAM, 0xF108F85F
-/**
- * @brief This is the code that gets called when the processor first
- * starts execution following a reset event. Only the absolutely
- * necessary set is performed, after which the application
- * supplied main() routine is called.
- * @param None
- * @retval : None
-*/
-
- .section .text.Reset_Handler
- .weak Reset_Handler
- .type Reset_Handler, %function
-Reset_Handler:
-
-/* Copy the data segment initializers from flash to SRAM */
- movs r1, #0
- b LoopCopyDataInit
-
-CopyDataInit:
- ldr r3, =_sidata
- ldr r3, [r3, r1]
- str r3, [r0, r1]
- adds r1, r1, #4
-
-LoopCopyDataInit:
- ldr r0, =_sdata
- ldr r3, =_edata
- adds r2, r0, r1
- cmp r2, r3
- bcc CopyDataInit
- ldr r2, =_sbss
- b LoopFillZerobss
-/* Zero fill the bss segment. */
-FillZerobss:
- movs r3, #0
- str r3, [r2], #4
-
-LoopFillZerobss:
- ldr r3, = _ebss
- cmp r2, r3
- bcc FillZerobss
-
-/* Call the clock system intitialization function.*/
- bl SystemInit
-/* Call static constructors */
- bl __libc_init_array
-/* Call the application's entry point.*/
- bl main
- bx lr
-.size Reset_Handler, .-Reset_Handler
-
-/**
- * @brief This is the code that gets called when the processor receives an
- * unexpected interrupt. This simply enters an infinite loop, preserving
- * the system state for examination by a debugger.
- *
- * @param None
- * @retval : None
-*/
- .section .text.Default_Handler,"ax",%progbits
-Default_Handler:
-Infinite_Loop:
- b Infinite_Loop
- .size Default_Handler, .-Default_Handler
-/******************************************************************************
-*
-* The minimal vector table for a Cortex M3. Note that the proper constructs
-* must be placed on this to ensure that it ends up at physical address
-* 0x0000.0000.
-*
-******************************************************************************/
- .section .isr_vector,"a",%progbits
- .type g_pfnVectors, %object
- .size g_pfnVectors, .-g_pfnVectors
-
-
-g_pfnVectors:
-
- .word _estack
- .word Reset_Handler
- .word NMI_Handler
- .word HardFault_Handler
- .word MemManage_Handler
- .word BusFault_Handler
- .word UsageFault_Handler
- .word 0
- .word 0
- .word 0
- .word 0
- .word SVC_Handler
- .word DebugMon_Handler
- .word 0
- .word PendSV_Handler
- .word SysTick_Handler
- .word WWDG_IRQHandler
- .word PVD_IRQHandler
- .word TAMPER_IRQHandler
- .word RTC_IRQHandler
- .word FLASH_IRQHandler
- .word RCC_IRQHandler
- .word EXTI0_IRQHandler
- .word EXTI1_IRQHandler
- .word EXTI2_IRQHandler
- .word EXTI3_IRQHandler
- .word EXTI4_IRQHandler
- .word DMA1_Channel1_IRQHandler
- .word DMA1_Channel2_IRQHandler
- .word DMA1_Channel3_IRQHandler
- .word DMA1_Channel4_IRQHandler
- .word DMA1_Channel5_IRQHandler
- .word DMA1_Channel6_IRQHandler
- .word DMA1_Channel7_IRQHandler
- .word ADC1_IRQHandler
- .word USB_HP_IRQHandler
- .word USB_LP_IRQHandler
- .word 0
- .word 0
- .word EXTI9_5_IRQHandler
- .word 0
- .word 0
- .word 0
- .word 0
- .word TIM2_IRQHandler
- .word TIM3_IRQHandler
- .word 0
- .word I2C1_EV_IRQHandler
- .word I2C1_ER_IRQHandler
- .word 0
- .word 0
- .word SPI1_IRQHandler
- .word 0
- .word USART1_IRQHandler
- .word USART2_IRQHandler
- .word 0
- .word EXTI15_10_IRQHandler
- .word RTC_Alarm_IRQHandler
- .word USBWakeUp_IRQHandler
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word BootRAM /* @0x108. This is for boot in RAM mode for
- STM32F10x Low Density devices.*/
-
-/*******************************************************************************
-*
-* Provide weak aliases for each Exception handler to the Default_Handler.
-* As they are weak aliases, any function with the same name will override
-* this definition.
-*
-*******************************************************************************/
-
- .weak NMI_Handler
- .thumb_set NMI_Handler,Default_Handler
-
- .weak HardFault_Handler
- .thumb_set HardFault_Handler,Default_Handler
-
- .weak MemManage_Handler
- .thumb_set MemManage_Handler,Default_Handler
-
- .weak BusFault_Handler
- .thumb_set BusFault_Handler,Default_Handler
-
- .weak UsageFault_Handler
- .thumb_set UsageFault_Handler,Default_Handler
-
- .weak SVC_Handler
- .thumb_set SVC_Handler,Default_Handler
-
- .weak DebugMon_Handler
- .thumb_set DebugMon_Handler,Default_Handler
-
- .weak PendSV_Handler
- .thumb_set PendSV_Handler,Default_Handler
-
- .weak SysTick_Handler
- .thumb_set SysTick_Handler,Default_Handler
-
- .weak WWDG_IRQHandler
- .thumb_set WWDG_IRQHandler,Default_Handler
-
- .weak PVD_IRQHandler
- .thumb_set PVD_IRQHandler,Default_Handler
-
- .weak TAMPER_IRQHandler
- .thumb_set TAMPER_IRQHandler,Default_Handler
-
- .weak RTC_IRQHandler
- .thumb_set RTC_IRQHandler,Default_Handler
-
- .weak FLASH_IRQHandler
- .thumb_set FLASH_IRQHandler,Default_Handler
-
- .weak RCC_IRQHandler
- .thumb_set RCC_IRQHandler,Default_Handler
-
- .weak EXTI0_IRQHandler
- .thumb_set EXTI0_IRQHandler,Default_Handler
-
- .weak EXTI1_IRQHandler
- .thumb_set EXTI1_IRQHandler,Default_Handler
-
- .weak EXTI2_IRQHandler
- .thumb_set EXTI2_IRQHandler,Default_Handler
-
- .weak EXTI3_IRQHandler
- .thumb_set EXTI3_IRQHandler,Default_Handler
-
- .weak EXTI4_IRQHandler
- .thumb_set EXTI4_IRQHandler,Default_Handler
-
- .weak DMA1_Channel1_IRQHandler
- .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
-
- .weak DMA1_Channel2_IRQHandler
- .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
-
- .weak DMA1_Channel3_IRQHandler
- .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
-
- .weak DMA1_Channel4_IRQHandler
- .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
-
- .weak DMA1_Channel5_IRQHandler
- .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
-
- .weak DMA1_Channel6_IRQHandler
- .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
-
- .weak DMA1_Channel7_IRQHandler
- .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
-
- .weak ADC1_IRQHandler
- .thumb_set ADC1_IRQHandler,Default_Handler
-
- .weak USB_HP_IRQHandler
- .thumb_set USB_HP_IRQHandler,Default_Handler
-
- .weak USB_LP_IRQHandler
- .thumb_set USB_LP_IRQHandler,Default_Handler
-
- .weak EXTI9_5_IRQHandler
- .thumb_set EXTI9_5_IRQHandler,Default_Handler
-
- .weak TIM2_IRQHandler
- .thumb_set TIM2_IRQHandler,Default_Handler
-
- .weak TIM3_IRQHandler
- .thumb_set TIM3_IRQHandler,Default_Handler
-
- .weak I2C1_EV_IRQHandler
- .thumb_set I2C1_EV_IRQHandler,Default_Handler
-
- .weak I2C1_ER_IRQHandler
- .thumb_set I2C1_ER_IRQHandler,Default_Handler
-
- .weak SPI1_IRQHandler
- .thumb_set SPI1_IRQHandler,Default_Handler
-
- .weak USART1_IRQHandler
- .thumb_set USART1_IRQHandler,Default_Handler
-
- .weak USART2_IRQHandler
- .thumb_set USART2_IRQHandler,Default_Handler
-
- .weak EXTI15_10_IRQHandler
- .thumb_set EXTI15_10_IRQHandler,Default_Handler
-
- .weak RTC_Alarm_IRQHandler
- .thumb_set RTC_Alarm_IRQHandler,Default_Handler
-
- .weak USBWakeUp_IRQHandler
- .thumb_set USBWakeUp_IRQHandler,Default_Handler
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/lib/cmsis-stm32f1/source/startup_stm32f102xb.s b/lib/cmsis-stm32f1/source/startup_stm32f102xb.s deleted file mode 100644 index 2372c69d..00000000 --- a/lib/cmsis-stm32f1/source/startup_stm32f102xb.s +++ /dev/null @@ -1,361 +0,0 @@ -/**
- *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
- * @file startup_stm32f102xb.s
- * @author MCD Application Team
- * @version V4.2.0
- * @date 31-March-2017
- * @brief STM32F102xB Value Line Devices vector table for Atollic toolchain.
- * This module performs:
- * - Set the initial SP
- * - Set the initial PC == Reset_Handler,
- * - Set the vector table entries with the exceptions ISR address
- * - Configure the clock system
- * - Branches to main in the C library (which eventually
- * calls main()).
- * After Reset the Cortex-M3 processor is in Thread mode,
- * priority is Privileged, and the Stack is set to Main.
- ******************************************************************************
- *
- * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
- .syntax unified
- .cpu cortex-m3
- .fpu softvfp
- .thumb
-
-.global g_pfnVectors
-.global Default_Handler
-
-/* start address for the initialization values of the .data section.
-defined in linker script */
-.word _sidata
-/* start address for the .data section. defined in linker script */
-.word _sdata
-/* end address for the .data section. defined in linker script */
-.word _edata
-/* start address for the .bss section. defined in linker script */
-.word _sbss
-/* end address for the .bss section. defined in linker script */
-.word _ebss
-
-.equ BootRAM, 0xF108F85F
-/**
- * @brief This is the code that gets called when the processor first
- * starts execution following a reset event. Only the absolutely
- * necessary set is performed, after which the application
- * supplied main() routine is called.
- * @param None
- * @retval : None
-*/
-
- .section .text.Reset_Handler
- .weak Reset_Handler
- .type Reset_Handler, %function
-Reset_Handler:
-
-/* Copy the data segment initializers from flash to SRAM */
- movs r1, #0
- b LoopCopyDataInit
-
-CopyDataInit:
- ldr r3, =_sidata
- ldr r3, [r3, r1]
- str r3, [r0, r1]
- adds r1, r1, #4
-
-LoopCopyDataInit:
- ldr r0, =_sdata
- ldr r3, =_edata
- adds r2, r0, r1
- cmp r2, r3
- bcc CopyDataInit
- ldr r2, =_sbss
- b LoopFillZerobss
-/* Zero fill the bss segment. */
-FillZerobss:
- movs r3, #0
- str r3, [r2], #4
-
-LoopFillZerobss:
- ldr r3, = _ebss
- cmp r2, r3
- bcc FillZerobss
-
-/* Call the clock system intitialization function.*/
- bl SystemInit
-/* Call static constructors */
- bl __libc_init_array
-/* Call the application's entry point.*/
- bl main
- bx lr
-.size Reset_Handler, .-Reset_Handler
-
-/**
- * @brief This is the code that gets called when the processor receives an
- * unexpected interrupt. This simply enters an infinite loop, preserving
- * the system state for examination by a debugger.
- *
- * @param None
- * @retval : None
-*/
- .section .text.Default_Handler,"ax",%progbits
-Default_Handler:
-Infinite_Loop:
- b Infinite_Loop
- .size Default_Handler, .-Default_Handler
-/******************************************************************************
-*
-* The minimal vector table for a Cortex M3. Note that the proper constructs
-* must be placed on this to ensure that it ends up at physical address
-* 0x0000.0000.
-*
-******************************************************************************/
- .section .isr_vector,"a",%progbits
- .type g_pfnVectors, %object
- .size g_pfnVectors, .-g_pfnVectors
-
-
-g_pfnVectors:
-
- .word _estack
- .word Reset_Handler
- .word NMI_Handler
- .word HardFault_Handler
- .word MemManage_Handler
- .word BusFault_Handler
- .word UsageFault_Handler
- .word 0
- .word 0
- .word 0
- .word 0
- .word SVC_Handler
- .word DebugMon_Handler
- .word 0
- .word PendSV_Handler
- .word SysTick_Handler
- .word WWDG_IRQHandler
- .word PVD_IRQHandler
- .word TAMPER_IRQHandler
- .word RTC_IRQHandler
- .word FLASH_IRQHandler
- .word RCC_IRQHandler
- .word EXTI0_IRQHandler
- .word EXTI1_IRQHandler
- .word EXTI2_IRQHandler
- .word EXTI3_IRQHandler
- .word EXTI4_IRQHandler
- .word DMA1_Channel1_IRQHandler
- .word DMA1_Channel2_IRQHandler
- .word DMA1_Channel3_IRQHandler
- .word DMA1_Channel4_IRQHandler
- .word DMA1_Channel5_IRQHandler
- .word DMA1_Channel6_IRQHandler
- .word DMA1_Channel7_IRQHandler
- .word ADC1_IRQHandler
- .word USB_HP_IRQHandler
- .word USB_LP_IRQHandler
- .word 0
- .word 0
- .word EXTI9_5_IRQHandler
- .word 0
- .word 0
- .word 0
- .word 0
- .word TIM2_IRQHandler
- .word TIM3_IRQHandler
- .word TIM4_IRQHandler
- .word I2C1_EV_IRQHandler
- .word I2C1_ER_IRQHandler
- .word I2C2_EV_IRQHandler
- .word I2C2_ER_IRQHandler
- .word SPI1_IRQHandler
- .word SPI2_IRQHandler
- .word USART1_IRQHandler
- .word USART2_IRQHandler
- .word USART3_IRQHandler
- .word EXTI15_10_IRQHandler
- .word RTC_Alarm_IRQHandler
- .word USBWakeUp_IRQHandler
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word BootRAM /* @0x108. This is for boot in RAM mode for
- STM32F10x Medium Density devices. */
-
-/*******************************************************************************
-*
-* Provide weak aliases for each Exception handler to the Default_Handler.
-* As they are weak aliases, any function with the same name will override
-* this definition.
-*
-*******************************************************************************/
-
- .weak NMI_Handler
- .thumb_set NMI_Handler,Default_Handler
-
- .weak HardFault_Handler
- .thumb_set HardFault_Handler,Default_Handler
-
- .weak MemManage_Handler
- .thumb_set MemManage_Handler,Default_Handler
-
- .weak BusFault_Handler
- .thumb_set BusFault_Handler,Default_Handler
-
- .weak UsageFault_Handler
- .thumb_set UsageFault_Handler,Default_Handler
-
- .weak SVC_Handler
- .thumb_set SVC_Handler,Default_Handler
-
- .weak DebugMon_Handler
- .thumb_set DebugMon_Handler,Default_Handler
-
- .weak PendSV_Handler
- .thumb_set PendSV_Handler,Default_Handler
-
- .weak SysTick_Handler
- .thumb_set SysTick_Handler,Default_Handler
-
- .weak WWDG_IRQHandler
- .thumb_set WWDG_IRQHandler,Default_Handler
-
- .weak PVD_IRQHandler
- .thumb_set PVD_IRQHandler,Default_Handler
-
- .weak TAMPER_IRQHandler
- .thumb_set TAMPER_IRQHandler,Default_Handler
-
- .weak RTC_IRQHandler
- .thumb_set RTC_IRQHandler,Default_Handler
-
- .weak FLASH_IRQHandler
- .thumb_set FLASH_IRQHandler,Default_Handler
-
- .weak RCC_IRQHandler
- .thumb_set RCC_IRQHandler,Default_Handler
-
- .weak EXTI0_IRQHandler
- .thumb_set EXTI0_IRQHandler,Default_Handler
-
- .weak EXTI1_IRQHandler
- .thumb_set EXTI1_IRQHandler,Default_Handler
-
- .weak EXTI2_IRQHandler
- .thumb_set EXTI2_IRQHandler,Default_Handler
-
- .weak EXTI3_IRQHandler
- .thumb_set EXTI3_IRQHandler,Default_Handler
-
- .weak EXTI4_IRQHandler
- .thumb_set EXTI4_IRQHandler,Default_Handler
-
- .weak DMA1_Channel1_IRQHandler
- .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
-
- .weak DMA1_Channel2_IRQHandler
- .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
-
- .weak DMA1_Channel3_IRQHandler
- .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
-
- .weak DMA1_Channel4_IRQHandler
- .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
-
- .weak DMA1_Channel5_IRQHandler
- .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
-
- .weak DMA1_Channel6_IRQHandler
- .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
-
- .weak DMA1_Channel7_IRQHandler
- .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
-
- .weak ADC1_IRQHandler
- .thumb_set ADC1_IRQHandler,Default_Handler
-
- .weak USB_HP_IRQHandler
- .thumb_set USB_HP_IRQHandler,Default_Handler
-
- .weak USB_LP_IRQHandler
- .thumb_set USB_LP_IRQHandler,Default_Handler
-
- .weak EXTI9_5_IRQHandler
- .thumb_set EXTI9_5_IRQHandler,Default_Handler
-
- .weak TIM2_IRQHandler
- .thumb_set TIM2_IRQHandler,Default_Handler
-
- .weak TIM3_IRQHandler
- .thumb_set TIM3_IRQHandler,Default_Handler
-
- .weak TIM4_IRQHandler
- .thumb_set TIM4_IRQHandler,Default_Handler
-
- .weak I2C1_EV_IRQHandler
- .thumb_set I2C1_EV_IRQHandler,Default_Handler
-
- .weak I2C1_ER_IRQHandler
- .thumb_set I2C1_ER_IRQHandler,Default_Handler
-
- .weak I2C2_EV_IRQHandler
- .thumb_set I2C2_EV_IRQHandler,Default_Handler
-
- .weak I2C2_ER_IRQHandler
- .thumb_set I2C2_ER_IRQHandler,Default_Handler
-
- .weak SPI1_IRQHandler
- .thumb_set SPI1_IRQHandler,Default_Handler
-
- .weak SPI2_IRQHandler
- .thumb_set SPI2_IRQHandler,Default_Handler
-
- .weak USART1_IRQHandler
- .thumb_set USART1_IRQHandler,Default_Handler
-
- .weak USART2_IRQHandler
- .thumb_set USART2_IRQHandler,Default_Handler
-
- .weak USART3_IRQHandler
- .thumb_set USART3_IRQHandler,Default_Handler
-
- .weak EXTI15_10_IRQHandler
- .thumb_set EXTI15_10_IRQHandler,Default_Handler
-
- .weak RTC_Alarm_IRQHandler
- .thumb_set RTC_Alarm_IRQHandler,Default_Handler
-
- .weak USBWakeUp_IRQHandler
- .thumb_set USBWakeUp_IRQHandler,Default_Handler
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
diff --git a/lib/cmsis-stm32f1/source/startup_stm32f103x6.s b/lib/cmsis-stm32f1/source/startup_stm32f103x6.s deleted file mode 100644 index 1e033fb0..00000000 --- a/lib/cmsis-stm32f1/source/startup_stm32f103x6.s +++ /dev/null @@ -1,363 +0,0 @@ -/**
- *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
- * @file startup_stm32f103x6.s
- * @author MCD Application Team
- * @version V4.2.0
- * @date 31-March-2017
- * @brief STM32F103x6 Devices vector table for Atollic toolchain.
- * This module performs:
- * - Set the initial SP
- * - Set the initial PC == Reset_Handler,
- * - Set the vector table entries with the exceptions ISR address
- * - Configure the clock system
- * - Branches to main in the C library (which eventually
- * calls main()).
- * After Reset the Cortex-M3 processor is in Thread mode,
- * priority is Privileged, and the Stack is set to Main.
- ******************************************************************************
- *
- * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
- .syntax unified
- .cpu cortex-m3
- .fpu softvfp
- .thumb
-
-.global g_pfnVectors
-.global Default_Handler
-
-/* start address for the initialization values of the .data section.
-defined in linker script */
-.word _sidata
-/* start address for the .data section. defined in linker script */
-.word _sdata
-/* end address for the .data section. defined in linker script */
-.word _edata
-/* start address for the .bss section. defined in linker script */
-.word _sbss
-/* end address for the .bss section. defined in linker script */
-.word _ebss
-
-.equ BootRAM, 0xF108F85F
-/**
- * @brief This is the code that gets called when the processor first
- * starts execution following a reset event. Only the absolutely
- * necessary set is performed, after which the application
- * supplied main() routine is called.
- * @param None
- * @retval : None
-*/
-
- .section .text.Reset_Handler
- .weak Reset_Handler
- .type Reset_Handler, %function
-Reset_Handler:
-
-/* Copy the data segment initializers from flash to SRAM */
- movs r1, #0
- b LoopCopyDataInit
-
-CopyDataInit:
- ldr r3, =_sidata
- ldr r3, [r3, r1]
- str r3, [r0, r1]
- adds r1, r1, #4
-
-LoopCopyDataInit:
- ldr r0, =_sdata
- ldr r3, =_edata
- adds r2, r0, r1
- cmp r2, r3
- bcc CopyDataInit
- ldr r2, =_sbss
- b LoopFillZerobss
-/* Zero fill the bss segment. */
-FillZerobss:
- movs r3, #0
- str r3, [r2], #4
-
-LoopFillZerobss:
- ldr r3, = _ebss
- cmp r2, r3
- bcc FillZerobss
-
-/* Call the clock system intitialization function.*/
- bl SystemInit
-/* Call static constructors */
- bl __libc_init_array
-/* Call the application's entry point.*/
- bl main
- bx lr
-.size Reset_Handler, .-Reset_Handler
-
-/**
- * @brief This is the code that gets called when the processor receives an
- * unexpected interrupt. This simply enters an infinite loop, preserving
- * the system state for examination by a debugger.
- *
- * @param None
- * @retval : None
-*/
- .section .text.Default_Handler,"ax",%progbits
-Default_Handler:
-Infinite_Loop:
- b Infinite_Loop
- .size Default_Handler, .-Default_Handler
-/******************************************************************************
-*
-* The minimal vector table for a Cortex M3. Note that the proper constructs
-* must be placed on this to ensure that it ends up at physical address
-* 0x0000.0000.
-*
-******************************************************************************/
- .section .isr_vector,"a",%progbits
- .type g_pfnVectors, %object
- .size g_pfnVectors, .-g_pfnVectors
-
-
-g_pfnVectors:
-
- .word _estack
- .word Reset_Handler
- .word NMI_Handler
- .word HardFault_Handler
- .word MemManage_Handler
- .word BusFault_Handler
- .word UsageFault_Handler
- .word 0
- .word 0
- .word 0
- .word 0
- .word SVC_Handler
- .word DebugMon_Handler
- .word 0
- .word PendSV_Handler
- .word SysTick_Handler
- .word WWDG_IRQHandler
- .word PVD_IRQHandler
- .word TAMPER_IRQHandler
- .word RTC_IRQHandler
- .word FLASH_IRQHandler
- .word RCC_IRQHandler
- .word EXTI0_IRQHandler
- .word EXTI1_IRQHandler
- .word EXTI2_IRQHandler
- .word EXTI3_IRQHandler
- .word EXTI4_IRQHandler
- .word DMA1_Channel1_IRQHandler
- .word DMA1_Channel2_IRQHandler
- .word DMA1_Channel3_IRQHandler
- .word DMA1_Channel4_IRQHandler
- .word DMA1_Channel5_IRQHandler
- .word DMA1_Channel6_IRQHandler
- .word DMA1_Channel7_IRQHandler
- .word ADC1_2_IRQHandler
- .word USB_HP_CAN1_TX_IRQHandler
- .word USB_LP_CAN1_RX0_IRQHandler
- .word CAN1_RX1_IRQHandler
- .word CAN1_SCE_IRQHandler
- .word EXTI9_5_IRQHandler
- .word TIM1_BRK_IRQHandler
- .word TIM1_UP_IRQHandler
- .word TIM1_TRG_COM_IRQHandler
- .word TIM1_CC_IRQHandler
- .word TIM2_IRQHandler
- .word TIM3_IRQHandler
- .word 0
- .word I2C1_EV_IRQHandler
- .word I2C1_ER_IRQHandler
- .word 0
- .word 0
- .word SPI1_IRQHandler
- .word 0
- .word USART1_IRQHandler
- .word USART2_IRQHandler
- .word 0
- .word EXTI15_10_IRQHandler
- .word RTC_Alarm_IRQHandler
- .word USBWakeUp_IRQHandler
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word BootRAM /* @0x108. This is for boot in RAM mode for
- STM32F10x Low Density devices.*/
-
-/*******************************************************************************
-*
-* Provide weak aliases for each Exception handler to the Default_Handler.
-* As they are weak aliases, any function with the same name will override
-* this definition.
-*
-*******************************************************************************/
-
- .weak NMI_Handler
- .thumb_set NMI_Handler,Default_Handler
-
- .weak HardFault_Handler
- .thumb_set HardFault_Handler,Default_Handler
-
- .weak MemManage_Handler
- .thumb_set MemManage_Handler,Default_Handler
-
- .weak BusFault_Handler
- .thumb_set BusFault_Handler,Default_Handler
-
- .weak UsageFault_Handler
- .thumb_set UsageFault_Handler,Default_Handler
-
- .weak SVC_Handler
- .thumb_set SVC_Handler,Default_Handler
-
- .weak DebugMon_Handler
- .thumb_set DebugMon_Handler,Default_Handler
-
- .weak PendSV_Handler
- .thumb_set PendSV_Handler,Default_Handler
-
- .weak SysTick_Handler
- .thumb_set SysTick_Handler,Default_Handler
-
- .weak WWDG_IRQHandler
- .thumb_set WWDG_IRQHandler,Default_Handler
-
- .weak PVD_IRQHandler
- .thumb_set PVD_IRQHandler,Default_Handler
-
- .weak TAMPER_IRQHandler
- .thumb_set TAMPER_IRQHandler,Default_Handler
-
- .weak RTC_IRQHandler
- .thumb_set RTC_IRQHandler,Default_Handler
-
- .weak FLASH_IRQHandler
- .thumb_set FLASH_IRQHandler,Default_Handler
-
- .weak RCC_IRQHandler
- .thumb_set RCC_IRQHandler,Default_Handler
-
- .weak EXTI0_IRQHandler
- .thumb_set EXTI0_IRQHandler,Default_Handler
-
- .weak EXTI1_IRQHandler
- .thumb_set EXTI1_IRQHandler,Default_Handler
-
- .weak EXTI2_IRQHandler
- .thumb_set EXTI2_IRQHandler,Default_Handler
-
- .weak EXTI3_IRQHandler
- .thumb_set EXTI3_IRQHandler,Default_Handler
-
- .weak EXTI4_IRQHandler
- .thumb_set EXTI4_IRQHandler,Default_Handler
-
- .weak DMA1_Channel1_IRQHandler
- .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
-
- .weak DMA1_Channel2_IRQHandler
- .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
-
- .weak DMA1_Channel3_IRQHandler
- .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
-
- .weak DMA1_Channel4_IRQHandler
- .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
-
- .weak DMA1_Channel5_IRQHandler
- .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
-
- .weak DMA1_Channel6_IRQHandler
- .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
-
- .weak DMA1_Channel7_IRQHandler
- .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
-
- .weak ADC1_2_IRQHandler
- .thumb_set ADC1_2_IRQHandler,Default_Handler
-
- .weak USB_HP_CAN1_TX_IRQHandler
- .thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
-
- .weak USB_LP_CAN1_RX0_IRQHandler
- .thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
-
- .weak CAN1_RX1_IRQHandler
- .thumb_set CAN1_RX1_IRQHandler,Default_Handler
-
- .weak CAN1_SCE_IRQHandler
- .thumb_set CAN1_SCE_IRQHandler,Default_Handler
-
- .weak EXTI9_5_IRQHandler
- .thumb_set EXTI9_5_IRQHandler,Default_Handler
-
- .weak TIM1_BRK_IRQHandler
- .thumb_set TIM1_BRK_IRQHandler,Default_Handler
-
- .weak TIM1_UP_IRQHandler
- .thumb_set TIM1_UP_IRQHandler,Default_Handler
-
- .weak TIM1_TRG_COM_IRQHandler
- .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
-
- .weak TIM1_CC_IRQHandler
- .thumb_set TIM1_CC_IRQHandler,Default_Handler
-
- .weak TIM2_IRQHandler
- .thumb_set TIM2_IRQHandler,Default_Handler
-
- .weak TIM3_IRQHandler
- .thumb_set TIM3_IRQHandler,Default_Handler
-
- .weak I2C1_EV_IRQHandler
- .thumb_set I2C1_EV_IRQHandler,Default_Handler
-
- .weak I2C1_ER_IRQHandler
- .thumb_set I2C1_ER_IRQHandler,Default_Handler
-
- .weak SPI1_IRQHandler
- .thumb_set SPI1_IRQHandler,Default_Handler
-
- .weak USART1_IRQHandler
- .thumb_set USART1_IRQHandler,Default_Handler
-
- .weak USART2_IRQHandler
- .thumb_set USART2_IRQHandler,Default_Handler
-
- .weak EXTI15_10_IRQHandler
- .thumb_set EXTI15_10_IRQHandler,Default_Handler
-
- .weak RTC_Alarm_IRQHandler
- .thumb_set RTC_Alarm_IRQHandler,Default_Handler
-
- .weak USBWakeUp_IRQHandler
- .thumb_set USBWakeUp_IRQHandler,Default_Handler
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/lib/cmsis-stm32f1/source/startup_stm32f103xb.s b/lib/cmsis-stm32f1/source/startup_stm32f103xb.s deleted file mode 100644 index 1bdd5240..00000000 --- a/lib/cmsis-stm32f1/source/startup_stm32f103xb.s +++ /dev/null @@ -1,379 +0,0 @@ -/**
- *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
- * @file startup_stm32f103xb.s
- * @author MCD Application Team
- * @version V4.2.0
- * @date 31-March-2017
- * @brief STM32F103xB Devices vector table for Atollic toolchain.
- * This module performs:
- * - Set the initial SP
- * - Set the initial PC == Reset_Handler,
- * - Set the vector table entries with the exceptions ISR address
- * - Configure the clock system
- * - Branches to main in the C library (which eventually
- * calls main()).
- * After Reset the Cortex-M3 processor is in Thread mode,
- * priority is Privileged, and the Stack is set to Main.
- ******************************************************************************
- *
- * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
- .syntax unified
- .cpu cortex-m3
- .fpu softvfp
- .thumb
-
-.global g_pfnVectors
-.global Default_Handler
-
-/* start address for the initialization values of the .data section.
-defined in linker script */
-.word _sidata
-/* start address for the .data section. defined in linker script */
-.word _sdata
-/* end address for the .data section. defined in linker script */
-.word _edata
-/* start address for the .bss section. defined in linker script */
-.word _sbss
-/* end address for the .bss section. defined in linker script */
-.word _ebss
-
-.equ BootRAM, 0xF108F85F
-/**
- * @brief This is the code that gets called when the processor first
- * starts execution following a reset event. Only the absolutely
- * necessary set is performed, after which the application
- * supplied main() routine is called.
- * @param None
- * @retval : None
-*/
-
- .section .text.Reset_Handler
- .weak Reset_Handler
- .type Reset_Handler, %function
-Reset_Handler:
-
-/* Copy the data segment initializers from flash to SRAM */
- movs r1, #0
- b LoopCopyDataInit
-
-CopyDataInit:
- ldr r3, =_sidata
- ldr r3, [r3, r1]
- str r3, [r0, r1]
- adds r1, r1, #4
-
-LoopCopyDataInit:
- ldr r0, =_sdata
- ldr r3, =_edata
- adds r2, r0, r1
- cmp r2, r3
- bcc CopyDataInit
- ldr r2, =_sbss
- b LoopFillZerobss
-/* Zero fill the bss segment. */
-FillZerobss:
- movs r3, #0
- str r3, [r2], #4
-
-LoopFillZerobss:
- ldr r3, = _ebss
- cmp r2, r3
- bcc FillZerobss
-
-/* Call the clock system intitialization function.*/
- bl SystemInit
-/* Call static constructors */
- bl __libc_init_array
-/* Call the application's entry point.*/
- bl main
- bx lr
-.size Reset_Handler, .-Reset_Handler
-
-/**
- * @brief This is the code that gets called when the processor receives an
- * unexpected interrupt. This simply enters an infinite loop, preserving
- * the system state for examination by a debugger.
- *
- * @param None
- * @retval : None
-*/
- .section .text.Default_Handler,"ax",%progbits
-Default_Handler:
-Infinite_Loop:
- b Infinite_Loop
- .size Default_Handler, .-Default_Handler
-/******************************************************************************
-*
-* The minimal vector table for a Cortex M3. Note that the proper constructs
-* must be placed on this to ensure that it ends up at physical address
-* 0x0000.0000.
-*
-******************************************************************************/
- .section .isr_vector,"a",%progbits
- .type g_pfnVectors, %object
- .size g_pfnVectors, .-g_pfnVectors
-
-
-g_pfnVectors:
-
- .word _estack
- .word Reset_Handler
- .word NMI_Handler
- .word HardFault_Handler
- .word MemManage_Handler
- .word BusFault_Handler
- .word UsageFault_Handler
- .word 0
- .word 0
- .word 0
- .word 0
- .word SVC_Handler
- .word DebugMon_Handler
- .word 0
- .word PendSV_Handler
- .word SysTick_Handler
- .word WWDG_IRQHandler
- .word PVD_IRQHandler
- .word TAMPER_IRQHandler
- .word RTC_IRQHandler
- .word FLASH_IRQHandler
- .word RCC_IRQHandler
- .word EXTI0_IRQHandler
- .word EXTI1_IRQHandler
- .word EXTI2_IRQHandler
- .word EXTI3_IRQHandler
- .word EXTI4_IRQHandler
- .word DMA1_Channel1_IRQHandler
- .word DMA1_Channel2_IRQHandler
- .word DMA1_Channel3_IRQHandler
- .word DMA1_Channel4_IRQHandler
- .word DMA1_Channel5_IRQHandler
- .word DMA1_Channel6_IRQHandler
- .word DMA1_Channel7_IRQHandler
- .word ADC1_2_IRQHandler
- .word USB_HP_CAN1_TX_IRQHandler
- .word USB_LP_CAN1_RX0_IRQHandler
- .word CAN1_RX1_IRQHandler
- .word CAN1_SCE_IRQHandler
- .word EXTI9_5_IRQHandler
- .word TIM1_BRK_IRQHandler
- .word TIM1_UP_IRQHandler
- .word TIM1_TRG_COM_IRQHandler
- .word TIM1_CC_IRQHandler
- .word TIM2_IRQHandler
- .word TIM3_IRQHandler
- .word TIM4_IRQHandler
- .word I2C1_EV_IRQHandler
- .word I2C1_ER_IRQHandler
- .word I2C2_EV_IRQHandler
- .word I2C2_ER_IRQHandler
- .word SPI1_IRQHandler
- .word SPI2_IRQHandler
- .word USART1_IRQHandler
- .word USART2_IRQHandler
- .word USART3_IRQHandler
- .word EXTI15_10_IRQHandler
- .word RTC_Alarm_IRQHandler
- .word USBWakeUp_IRQHandler
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word BootRAM /* @0x108. This is for boot in RAM mode for
- STM32F10x Medium Density devices. */
-
-/*******************************************************************************
-*
-* Provide weak aliases for each Exception handler to the Default_Handler.
-* As they are weak aliases, any function with the same name will override
-* this definition.
-*
-*******************************************************************************/
-
- .weak NMI_Handler
- .thumb_set NMI_Handler,Default_Handler
-
- .weak HardFault_Handler
- .thumb_set HardFault_Handler,Default_Handler
-
- .weak MemManage_Handler
- .thumb_set MemManage_Handler,Default_Handler
-
- .weak BusFault_Handler
- .thumb_set BusFault_Handler,Default_Handler
-
- .weak UsageFault_Handler
- .thumb_set UsageFault_Handler,Default_Handler
-
- .weak SVC_Handler
- .thumb_set SVC_Handler,Default_Handler
-
- .weak DebugMon_Handler
- .thumb_set DebugMon_Handler,Default_Handler
-
- .weak PendSV_Handler
- .thumb_set PendSV_Handler,Default_Handler
-
- .weak SysTick_Handler
- .thumb_set SysTick_Handler,Default_Handler
-
- .weak WWDG_IRQHandler
- .thumb_set WWDG_IRQHandler,Default_Handler
-
- .weak PVD_IRQHandler
- .thumb_set PVD_IRQHandler,Default_Handler
-
- .weak TAMPER_IRQHandler
- .thumb_set TAMPER_IRQHandler,Default_Handler
-
- .weak RTC_IRQHandler
- .thumb_set RTC_IRQHandler,Default_Handler
-
- .weak FLASH_IRQHandler
- .thumb_set FLASH_IRQHandler,Default_Handler
-
- .weak RCC_IRQHandler
- .thumb_set RCC_IRQHandler,Default_Handler
-
- .weak EXTI0_IRQHandler
- .thumb_set EXTI0_IRQHandler,Default_Handler
-
- .weak EXTI1_IRQHandler
- .thumb_set EXTI1_IRQHandler,Default_Handler
-
- .weak EXTI2_IRQHandler
- .thumb_set EXTI2_IRQHandler,Default_Handler
-
- .weak EXTI3_IRQHandler
- .thumb_set EXTI3_IRQHandler,Default_Handler
-
- .weak EXTI4_IRQHandler
- .thumb_set EXTI4_IRQHandler,Default_Handler
-
- .weak DMA1_Channel1_IRQHandler
- .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
-
- .weak DMA1_Channel2_IRQHandler
- .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
-
- .weak DMA1_Channel3_IRQHandler
- .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
-
- .weak DMA1_Channel4_IRQHandler
- .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
-
- .weak DMA1_Channel5_IRQHandler
- .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
-
- .weak DMA1_Channel6_IRQHandler
- .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
-
- .weak DMA1_Channel7_IRQHandler
- .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
-
- .weak ADC1_2_IRQHandler
- .thumb_set ADC1_2_IRQHandler,Default_Handler
-
- .weak USB_HP_CAN1_TX_IRQHandler
- .thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
-
- .weak USB_LP_CAN1_RX0_IRQHandler
- .thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
-
- .weak CAN1_RX1_IRQHandler
- .thumb_set CAN1_RX1_IRQHandler,Default_Handler
-
- .weak CAN1_SCE_IRQHandler
- .thumb_set CAN1_SCE_IRQHandler,Default_Handler
-
- .weak EXTI9_5_IRQHandler
- .thumb_set EXTI9_5_IRQHandler,Default_Handler
-
- .weak TIM1_BRK_IRQHandler
- .thumb_set TIM1_BRK_IRQHandler,Default_Handler
-
- .weak TIM1_UP_IRQHandler
- .thumb_set TIM1_UP_IRQHandler,Default_Handler
-
- .weak TIM1_TRG_COM_IRQHandler
- .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
-
- .weak TIM1_CC_IRQHandler
- .thumb_set TIM1_CC_IRQHandler,Default_Handler
-
- .weak TIM2_IRQHandler
- .thumb_set TIM2_IRQHandler,Default_Handler
-
- .weak TIM3_IRQHandler
- .thumb_set TIM3_IRQHandler,Default_Handler
-
- .weak TIM4_IRQHandler
- .thumb_set TIM4_IRQHandler,Default_Handler
-
- .weak I2C1_EV_IRQHandler
- .thumb_set I2C1_EV_IRQHandler,Default_Handler
-
- .weak I2C1_ER_IRQHandler
- .thumb_set I2C1_ER_IRQHandler,Default_Handler
-
- .weak I2C2_EV_IRQHandler
- .thumb_set I2C2_EV_IRQHandler,Default_Handler
-
- .weak I2C2_ER_IRQHandler
- .thumb_set I2C2_ER_IRQHandler,Default_Handler
-
- .weak SPI1_IRQHandler
- .thumb_set SPI1_IRQHandler,Default_Handler
-
- .weak SPI2_IRQHandler
- .thumb_set SPI2_IRQHandler,Default_Handler
-
- .weak USART1_IRQHandler
- .thumb_set USART1_IRQHandler,Default_Handler
-
- .weak USART2_IRQHandler
- .thumb_set USART2_IRQHandler,Default_Handler
-
- .weak USART3_IRQHandler
- .thumb_set USART3_IRQHandler,Default_Handler
-
- .weak EXTI15_10_IRQHandler
- .thumb_set EXTI15_10_IRQHandler,Default_Handler
-
- .weak RTC_Alarm_IRQHandler
- .thumb_set RTC_Alarm_IRQHandler,Default_Handler
-
- .weak USBWakeUp_IRQHandler
- .thumb_set USBWakeUp_IRQHandler,Default_Handler
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
diff --git a/lib/cmsis-stm32f1/source/startup_stm32f103xe.s b/lib/cmsis-stm32f1/source/startup_stm32f103xe.s deleted file mode 100644 index 0727d658..00000000 --- a/lib/cmsis-stm32f1/source/startup_stm32f103xe.s +++ /dev/null @@ -1,485 +0,0 @@ -/**
- *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
- * @file startup_stm32f103xe.s
- * @author MCD Application Team
- * @version V4.2.0
- * @date 31-March-2017
- * @brief STM32F103xE Devices vector table for Atollic toolchain.
- * This module performs:
- * - Set the initial SP
- * - Set the initial PC == Reset_Handler,
- * - Set the vector table entries with the exceptions ISR address
- * - Configure the clock system
- * - Configure external SRAM mounted on STM3210E-EVAL board
- * to be used as data memory (optional, to be enabled by user)
- * - Branches to main in the C library (which eventually
- * calls main()).
- * After Reset the Cortex-M3 processor is in Thread mode,
- * priority is Privileged, and the Stack is set to Main.
- ******************************************************************************
- *
- * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
- .syntax unified
- .cpu cortex-m3
- .fpu softvfp
- .thumb
-
-.global g_pfnVectors
-.global Default_Handler
-
-/* start address for the initialization values of the .data section.
-defined in linker script */
-.word _sidata
-/* start address for the .data section. defined in linker script */
-.word _sdata
-/* end address for the .data section. defined in linker script */
-.word _edata
-/* start address for the .bss section. defined in linker script */
-.word _sbss
-/* end address for the .bss section. defined in linker script */
-.word _ebss
-
-.equ BootRAM, 0xF1E0F85F
-/**
- * @brief This is the code that gets called when the processor first
- * starts execution following a reset event. Only the absolutely
- * necessary set is performed, after which the application
- * supplied main() routine is called.
- * @param None
- * @retval : None
-*/
-
- .section .text.Reset_Handler
- .weak Reset_Handler
- .type Reset_Handler, %function
-Reset_Handler:
-
-/* Copy the data segment initializers from flash to SRAM */
- movs r1, #0
- b LoopCopyDataInit
-
-CopyDataInit:
- ldr r3, =_sidata
- ldr r3, [r3, r1]
- str r3, [r0, r1]
- adds r1, r1, #4
-
-LoopCopyDataInit:
- ldr r0, =_sdata
- ldr r3, =_edata
- adds r2, r0, r1
- cmp r2, r3
- bcc CopyDataInit
- ldr r2, =_sbss
- b LoopFillZerobss
-/* Zero fill the bss segment. */
-FillZerobss:
- movs r3, #0
- str r3, [r2], #4
-
-LoopFillZerobss:
- ldr r3, = _ebss
- cmp r2, r3
- bcc FillZerobss
-
-/* Call the clock system intitialization function.*/
- bl SystemInit
-/* Call static constructors */
- bl __libc_init_array
-/* Call the application's entry point.*/
- bl main
- bx lr
-.size Reset_Handler, .-Reset_Handler
-
-/**
- * @brief This is the code that gets called when the processor receives an
- * unexpected interrupt. This simply enters an infinite loop, preserving
- * the system state for examination by a debugger.
- *
- * @param None
- * @retval : None
-*/
- .section .text.Default_Handler,"ax",%progbits
-Default_Handler:
-Infinite_Loop:
- b Infinite_Loop
- .size Default_Handler, .-Default_Handler
-/******************************************************************************
-*
-* The minimal vector table for a Cortex M3. Note that the proper constructs
-* must be placed on this to ensure that it ends up at physical address
-* 0x0000.0000.
-*
-******************************************************************************/
- .section .isr_vector,"a",%progbits
- .type g_pfnVectors, %object
- .size g_pfnVectors, .-g_pfnVectors
-
-
-g_pfnVectors:
-
- .word _estack
- .word Reset_Handler
- .word NMI_Handler
- .word HardFault_Handler
- .word MemManage_Handler
- .word BusFault_Handler
- .word UsageFault_Handler
- .word 0
- .word 0
- .word 0
- .word 0
- .word SVC_Handler
- .word DebugMon_Handler
- .word 0
- .word PendSV_Handler
- .word SysTick_Handler
- .word WWDG_IRQHandler
- .word PVD_IRQHandler
- .word TAMPER_IRQHandler
- .word RTC_IRQHandler
- .word FLASH_IRQHandler
- .word RCC_IRQHandler
- .word EXTI0_IRQHandler
- .word EXTI1_IRQHandler
- .word EXTI2_IRQHandler
- .word EXTI3_IRQHandler
- .word EXTI4_IRQHandler
- .word DMA1_Channel1_IRQHandler
- .word DMA1_Channel2_IRQHandler
- .word DMA1_Channel3_IRQHandler
- .word DMA1_Channel4_IRQHandler
- .word DMA1_Channel5_IRQHandler
- .word DMA1_Channel6_IRQHandler
- .word DMA1_Channel7_IRQHandler
- .word ADC1_2_IRQHandler
- .word USB_HP_CAN1_TX_IRQHandler
- .word USB_LP_CAN1_RX0_IRQHandler
- .word CAN1_RX1_IRQHandler
- .word CAN1_SCE_IRQHandler
- .word EXTI9_5_IRQHandler
- .word TIM1_BRK_IRQHandler
- .word TIM1_UP_IRQHandler
- .word TIM1_TRG_COM_IRQHandler
- .word TIM1_CC_IRQHandler
- .word TIM2_IRQHandler
- .word TIM3_IRQHandler
- .word TIM4_IRQHandler
- .word I2C1_EV_IRQHandler
- .word I2C1_ER_IRQHandler
- .word I2C2_EV_IRQHandler
- .word I2C2_ER_IRQHandler
- .word SPI1_IRQHandler
- .word SPI2_IRQHandler
- .word USART1_IRQHandler
- .word USART2_IRQHandler
- .word USART3_IRQHandler
- .word EXTI15_10_IRQHandler
- .word RTC_Alarm_IRQHandler
- .word USBWakeUp_IRQHandler
- .word TIM8_BRK_IRQHandler
- .word TIM8_UP_IRQHandler
- .word TIM8_TRG_COM_IRQHandler
- .word TIM8_CC_IRQHandler
- .word ADC3_IRQHandler
- .word FSMC_IRQHandler
- .word SDIO_IRQHandler
- .word TIM5_IRQHandler
- .word SPI3_IRQHandler
- .word UART4_IRQHandler
- .word UART5_IRQHandler
- .word TIM6_IRQHandler
- .word TIM7_IRQHandler
- .word DMA2_Channel1_IRQHandler
- .word DMA2_Channel2_IRQHandler
- .word DMA2_Channel3_IRQHandler
- .word DMA2_Channel4_5_IRQHandler
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word BootRAM /* @0x1E0. This is for boot in RAM mode for
- STM32F10x High Density devices. */
-
-/*******************************************************************************
-*
-* Provide weak aliases for each Exception handler to the Default_Handler.
-* As they are weak aliases, any function with the same name will override
-* this definition.
-*
-*******************************************************************************/
-
- .weak NMI_Handler
- .thumb_set NMI_Handler,Default_Handler
-
- .weak HardFault_Handler
- .thumb_set HardFault_Handler,Default_Handler
-
- .weak MemManage_Handler
- .thumb_set MemManage_Handler,Default_Handler
-
- .weak BusFault_Handler
- .thumb_set BusFault_Handler,Default_Handler
-
- .weak UsageFault_Handler
- .thumb_set UsageFault_Handler,Default_Handler
-
- .weak SVC_Handler
- .thumb_set SVC_Handler,Default_Handler
-
- .weak DebugMon_Handler
- .thumb_set DebugMon_Handler,Default_Handler
-
- .weak PendSV_Handler
- .thumb_set PendSV_Handler,Default_Handler
-
- .weak SysTick_Handler
- .thumb_set SysTick_Handler,Default_Handler
-
- .weak WWDG_IRQHandler
- .thumb_set WWDG_IRQHandler,Default_Handler
-
- .weak PVD_IRQHandler
- .thumb_set PVD_IRQHandler,Default_Handler
-
- .weak TAMPER_IRQHandler
- .thumb_set TAMPER_IRQHandler,Default_Handler
-
- .weak RTC_IRQHandler
- .thumb_set RTC_IRQHandler,Default_Handler
-
- .weak FLASH_IRQHandler
- .thumb_set FLASH_IRQHandler,Default_Handler
-
- .weak RCC_IRQHandler
- .thumb_set RCC_IRQHandler,Default_Handler
-
- .weak EXTI0_IRQHandler
- .thumb_set EXTI0_IRQHandler,Default_Handler
-
- .weak EXTI1_IRQHandler
- .thumb_set EXTI1_IRQHandler,Default_Handler
-
- .weak EXTI2_IRQHandler
- .thumb_set EXTI2_IRQHandler,Default_Handler
-
- .weak EXTI3_IRQHandler
- .thumb_set EXTI3_IRQHandler,Default_Handler
-
- .weak EXTI4_IRQHandler
- .thumb_set EXTI4_IRQHandler,Default_Handler
-
- .weak DMA1_Channel1_IRQHandler
- .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
-
- .weak DMA1_Channel2_IRQHandler
- .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
-
- .weak DMA1_Channel3_IRQHandler
- .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
-
- .weak DMA1_Channel4_IRQHandler
- .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
-
- .weak DMA1_Channel5_IRQHandler
- .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
-
- .weak DMA1_Channel6_IRQHandler
- .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
-
- .weak DMA1_Channel7_IRQHandler
- .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
-
- .weak ADC1_2_IRQHandler
- .thumb_set ADC1_2_IRQHandler,Default_Handler
-
- .weak USB_HP_CAN1_TX_IRQHandler
- .thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
-
- .weak USB_LP_CAN1_RX0_IRQHandler
- .thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
-
- .weak CAN1_RX1_IRQHandler
- .thumb_set CAN1_RX1_IRQHandler,Default_Handler
-
- .weak CAN1_SCE_IRQHandler
- .thumb_set CAN1_SCE_IRQHandler,Default_Handler
-
- .weak EXTI9_5_IRQHandler
- .thumb_set EXTI9_5_IRQHandler,Default_Handler
-
- .weak TIM1_BRK_IRQHandler
- .thumb_set TIM1_BRK_IRQHandler,Default_Handler
-
- .weak TIM1_UP_IRQHandler
- .thumb_set TIM1_UP_IRQHandler,Default_Handler
-
- .weak TIM1_TRG_COM_IRQHandler
- .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
-
- .weak TIM1_CC_IRQHandler
- .thumb_set TIM1_CC_IRQHandler,Default_Handler
-
- .weak TIM2_IRQHandler
- .thumb_set TIM2_IRQHandler,Default_Handler
-
- .weak TIM3_IRQHandler
- .thumb_set TIM3_IRQHandler,Default_Handler
-
- .weak TIM4_IRQHandler
- .thumb_set TIM4_IRQHandler,Default_Handler
-
- .weak I2C1_EV_IRQHandler
- .thumb_set I2C1_EV_IRQHandler,Default_Handler
-
- .weak I2C1_ER_IRQHandler
- .thumb_set I2C1_ER_IRQHandler,Default_Handler
-
- .weak I2C2_EV_IRQHandler
- .thumb_set I2C2_EV_IRQHandler,Default_Handler
-
- .weak I2C2_ER_IRQHandler
- .thumb_set I2C2_ER_IRQHandler,Default_Handler
-
- .weak SPI1_IRQHandler
- .thumb_set SPI1_IRQHandler,Default_Handler
-
- .weak SPI2_IRQHandler
- .thumb_set SPI2_IRQHandler,Default_Handler
-
- .weak USART1_IRQHandler
- .thumb_set USART1_IRQHandler,Default_Handler
-
- .weak USART2_IRQHandler
- .thumb_set USART2_IRQHandler,Default_Handler
-
- .weak USART3_IRQHandler
- .thumb_set USART3_IRQHandler,Default_Handler
-
- .weak EXTI15_10_IRQHandler
- .thumb_set EXTI15_10_IRQHandler,Default_Handler
-
- .weak RTC_Alarm_IRQHandler
- .thumb_set RTC_Alarm_IRQHandler,Default_Handler
-
- .weak USBWakeUp_IRQHandler
- .thumb_set USBWakeUp_IRQHandler,Default_Handler
-
- .weak TIM8_BRK_IRQHandler
- .thumb_set TIM8_BRK_IRQHandler,Default_Handler
-
- .weak TIM8_UP_IRQHandler
- .thumb_set TIM8_UP_IRQHandler,Default_Handler
-
- .weak TIM8_TRG_COM_IRQHandler
- .thumb_set TIM8_TRG_COM_IRQHandler,Default_Handler
-
- .weak TIM8_CC_IRQHandler
- .thumb_set TIM8_CC_IRQHandler,Default_Handler
-
- .weak ADC3_IRQHandler
- .thumb_set ADC3_IRQHandler,Default_Handler
-
- .weak FSMC_IRQHandler
- .thumb_set FSMC_IRQHandler,Default_Handler
-
- .weak SDIO_IRQHandler
- .thumb_set SDIO_IRQHandler,Default_Handler
-
- .weak TIM5_IRQHandler
- .thumb_set TIM5_IRQHandler,Default_Handler
-
- .weak SPI3_IRQHandler
- .thumb_set SPI3_IRQHandler,Default_Handler
-
- .weak UART4_IRQHandler
- .thumb_set UART4_IRQHandler,Default_Handler
-
- .weak UART5_IRQHandler
- .thumb_set UART5_IRQHandler,Default_Handler
-
- .weak TIM6_IRQHandler
- .thumb_set TIM6_IRQHandler,Default_Handler
-
- .weak TIM7_IRQHandler
- .thumb_set TIM7_IRQHandler,Default_Handler
-
- .weak DMA2_Channel1_IRQHandler
- .thumb_set DMA2_Channel1_IRQHandler,Default_Handler
-
- .weak DMA2_Channel2_IRQHandler
- .thumb_set DMA2_Channel2_IRQHandler,Default_Handler
-
- .weak DMA2_Channel3_IRQHandler
- .thumb_set DMA2_Channel3_IRQHandler,Default_Handler
-
- .weak DMA2_Channel4_5_IRQHandler
- .thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/lib/cmsis-stm32f1/source/startup_stm32f103xg.s b/lib/cmsis-stm32f1/source/startup_stm32f103xg.s deleted file mode 100644 index 1ae0faf7..00000000 --- a/lib/cmsis-stm32f1/source/startup_stm32f103xg.s +++ /dev/null @@ -1,482 +0,0 @@ -/**
- *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
- * @file startup_stm32f103xb.s
- * @author MCD Application Team
- * @version V4.2.0
- * @date 31-March-2017
- * @brief STM32F103xB Devices vector table for Atollic toolchain.
- * This module performs:
- * - Set the initial SP
- * - Set the initial PC == Reset_Handler,
- * - Set the vector table entries with the exceptions ISR address
- * - Configure the clock system
- * - Branches to main in the C library (which eventually
- * calls main()).
- * After Reset the Cortex-M3 processor is in Thread mode,
- * priority is Privileged, and the Stack is set to Main.
- ******************************************************************************
- *
- * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
- .syntax unified
- .cpu cortex-m3
- .fpu softvfp
- .thumb
-
-.global g_pfnVectors
-.global Default_Handler
-
-/* start address for the initialization values of the .data section.
-defined in linker script */
-.word _sidata
-/* start address for the .data section. defined in linker script */
-.word _sdata
-/* end address for the .data section. defined in linker script */
-.word _edata
-/* start address for the .bss section. defined in linker script */
-.word _sbss
-/* end address for the .bss section. defined in linker script */
-.word _ebss
-
-.equ BootRAM, 0xF1E0F85F
-/**
- * @brief This is the code that gets called when the processor first
- * starts execution following a reset event. Only the absolutely
- * necessary set is performed, after which the application
- * supplied main() routine is called.
- * @param None
- * @retval : None
-*/
-
- .section .text.Reset_Handler
- .weak Reset_Handler
- .type Reset_Handler, %function
-Reset_Handler:
-
-/* Copy the data segment initializers from flash to SRAM */
- movs r1, #0
- b LoopCopyDataInit
-
-CopyDataInit:
- ldr r3, =_sidata
- ldr r3, [r3, r1]
- str r3, [r0, r1]
- adds r1, r1, #4
-
-LoopCopyDataInit:
- ldr r0, =_sdata
- ldr r3, =_edata
- adds r2, r0, r1
- cmp r2, r3
- bcc CopyDataInit
- ldr r2, =_sbss
- b LoopFillZerobss
-
-/* Zero fill the bss segment. */
-FillZerobss:
- movs r3, #0
- str r3, [r2], #4
-
-LoopFillZerobss:
- ldr r3, = _ebss
- cmp r2, r3
- bcc FillZerobss
-
-/* Call the clock system intitialization function.*/
- bl SystemInit
-/* Call static constructors */
- bl __libc_init_array
-/* Call the application's entry point.*/
- bl main
- bx lr
-.size Reset_Handler, .-Reset_Handler
-
-/**
- * @brief This is the code that gets called when the processor receives an
- * unexpected interrupt. This simply enters an infinite loop, preserving
- * the system state for examination by a debugger.
- * @param None
- * @retval None
-*/
- .section .text.Default_Handler,"ax",%progbits
-Default_Handler:
-Infinite_Loop:
- b Infinite_Loop
- .size Default_Handler, .-Default_Handler
-/******************************************************************************
-*
-* The minimal vector table for a Cortex M3. Note that the proper constructs
-* must be placed on this to ensure that it ends up at physical address
-* 0x0000.0000.
-*
-*******************************************************************************/
- .section .isr_vector,"a",%progbits
- .type g_pfnVectors, %object
- .size g_pfnVectors, .-g_pfnVectors
-
-
-g_pfnVectors:
-
- .word _estack
- .word Reset_Handler
- .word NMI_Handler
- .word HardFault_Handler
- .word MemManage_Handler
- .word BusFault_Handler
- .word UsageFault_Handler
- .word 0
- .word 0
- .word 0
- .word 0
- .word SVC_Handler
- .word DebugMon_Handler
- .word 0
- .word PendSV_Handler
- .word SysTick_Handler
- .word WWDG_IRQHandler
- .word PVD_IRQHandler
- .word TAMPER_IRQHandler
- .word RTC_IRQHandler
- .word FLASH_IRQHandler
- .word RCC_IRQHandler
- .word EXTI0_IRQHandler
- .word EXTI1_IRQHandler
- .word EXTI2_IRQHandler
- .word EXTI3_IRQHandler
- .word EXTI4_IRQHandler
- .word DMA1_Channel1_IRQHandler
- .word DMA1_Channel2_IRQHandler
- .word DMA1_Channel3_IRQHandler
- .word DMA1_Channel4_IRQHandler
- .word DMA1_Channel5_IRQHandler
- .word DMA1_Channel6_IRQHandler
- .word DMA1_Channel7_IRQHandler
- .word ADC1_2_IRQHandler
- .word USB_HP_CAN1_TX_IRQHandler
- .word USB_LP_CAN1_RX0_IRQHandler
- .word CAN1_RX1_IRQHandler
- .word CAN1_SCE_IRQHandler
- .word EXTI9_5_IRQHandler
- .word TIM1_BRK_TIM9_IRQHandler
- .word TIM1_UP_TIM10_IRQHandler
- .word TIM1_TRG_COM_TIM11_IRQHandler
- .word TIM1_CC_IRQHandler
- .word TIM2_IRQHandler
- .word TIM3_IRQHandler
- .word TIM4_IRQHandler
- .word I2C1_EV_IRQHandler
- .word I2C1_ER_IRQHandler
- .word I2C2_EV_IRQHandler
- .word I2C2_ER_IRQHandler
- .word SPI1_IRQHandler
- .word SPI2_IRQHandler
- .word USART1_IRQHandler
- .word USART2_IRQHandler
- .word USART3_IRQHandler
- .word EXTI15_10_IRQHandler
- .word RTC_Alarm_IRQHandler
- .word USBWakeUp_IRQHandler
- .word TIM8_BRK_TIM12_IRQHandler
- .word TIM8_UP_TIM13_IRQHandler
- .word TIM8_TRG_COM_TIM14_IRQHandler
- .word TIM8_CC_IRQHandler
- .word ADC3_IRQHandler
- .word FSMC_IRQHandler
- .word SDIO_IRQHandler
- .word TIM5_IRQHandler
- .word SPI3_IRQHandler
- .word UART4_IRQHandler
- .word UART5_IRQHandler
- .word TIM6_IRQHandler
- .word TIM7_IRQHandler
- .word DMA2_Channel1_IRQHandler
- .word DMA2_Channel2_IRQHandler
- .word DMA2_Channel3_IRQHandler
- .word DMA2_Channel4_5_IRQHandler
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word BootRAM /* @0x1E0. This is for boot in RAM mode for
- STM32F10x XL-Density devices. */
-/*******************************************************************************
-*
-* Provide weak aliases for each Exception handler to the Default_Handler.
-* As they are weak aliases, any function with the same name will override
-* this definition.
-*
-*******************************************************************************/
-
- .weak NMI_Handler
- .thumb_set NMI_Handler,Default_Handler
-
- .weak HardFault_Handler
- .thumb_set HardFault_Handler,Default_Handler
-
- .weak MemManage_Handler
- .thumb_set MemManage_Handler,Default_Handler
-
- .weak BusFault_Handler
- .thumb_set BusFault_Handler,Default_Handler
-
- .weak UsageFault_Handler
- .thumb_set UsageFault_Handler,Default_Handler
-
- .weak SVC_Handler
- .thumb_set SVC_Handler,Default_Handler
-
- .weak DebugMon_Handler
- .thumb_set DebugMon_Handler,Default_Handler
-
- .weak PendSV_Handler
- .thumb_set PendSV_Handler,Default_Handler
-
- .weak SysTick_Handler
- .thumb_set SysTick_Handler,Default_Handler
-
- .weak WWDG_IRQHandler
- .thumb_set WWDG_IRQHandler,Default_Handler
-
- .weak PVD_IRQHandler
- .thumb_set PVD_IRQHandler,Default_Handler
-
- .weak TAMPER_IRQHandler
- .thumb_set TAMPER_IRQHandler,Default_Handler
-
- .weak RTC_IRQHandler
- .thumb_set RTC_IRQHandler,Default_Handler
-
- .weak FLASH_IRQHandler
- .thumb_set FLASH_IRQHandler,Default_Handler
-
- .weak RCC_IRQHandler
- .thumb_set RCC_IRQHandler,Default_Handler
-
- .weak EXTI0_IRQHandler
- .thumb_set EXTI0_IRQHandler,Default_Handler
-
- .weak EXTI1_IRQHandler
- .thumb_set EXTI1_IRQHandler,Default_Handler
-
- .weak EXTI2_IRQHandler
- .thumb_set EXTI2_IRQHandler,Default_Handler
-
- .weak EXTI3_IRQHandler
- .thumb_set EXTI3_IRQHandler,Default_Handler
-
- .weak EXTI4_IRQHandler
- .thumb_set EXTI4_IRQHandler,Default_Handler
-
- .weak DMA1_Channel1_IRQHandler
- .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
-
- .weak DMA1_Channel2_IRQHandler
- .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
-
- .weak DMA1_Channel3_IRQHandler
- .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
-
- .weak DMA1_Channel4_IRQHandler
- .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
-
- .weak DMA1_Channel5_IRQHandler
- .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
-
- .weak DMA1_Channel6_IRQHandler
- .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
-
- .weak DMA1_Channel7_IRQHandler
- .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
-
- .weak ADC1_2_IRQHandler
- .thumb_set ADC1_2_IRQHandler,Default_Handler
-
- .weak USB_HP_CAN1_TX_IRQHandler
- .thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
-
- .weak USB_LP_CAN1_RX0_IRQHandler
- .thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
-
- .weak CAN1_RX1_IRQHandler
- .thumb_set CAN1_RX1_IRQHandler,Default_Handler
-
- .weak CAN1_SCE_IRQHandler
- .thumb_set CAN1_SCE_IRQHandler,Default_Handler
-
- .weak EXTI9_5_IRQHandler
- .thumb_set EXTI9_5_IRQHandler,Default_Handler
-
- .weak TIM1_BRK_TIM9_IRQHandler
- .thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler
-
- .weak TIM1_UP_TIM10_IRQHandler
- .thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler
-
- .weak TIM1_TRG_COM_TIM11_IRQHandler
- .thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler
-
- .weak TIM1_CC_IRQHandler
- .thumb_set TIM1_CC_IRQHandler,Default_Handler
-
- .weak TIM2_IRQHandler
- .thumb_set TIM2_IRQHandler,Default_Handler
-
- .weak TIM3_IRQHandler
- .thumb_set TIM3_IRQHandler,Default_Handler
-
- .weak TIM4_IRQHandler
- .thumb_set TIM4_IRQHandler,Default_Handler
-
- .weak I2C1_EV_IRQHandler
- .thumb_set I2C1_EV_IRQHandler,Default_Handler
-
- .weak I2C1_ER_IRQHandler
- .thumb_set I2C1_ER_IRQHandler,Default_Handler
-
- .weak I2C2_EV_IRQHandler
- .thumb_set I2C2_EV_IRQHandler,Default_Handler
-
- .weak I2C2_ER_IRQHandler
- .thumb_set I2C2_ER_IRQHandler,Default_Handler
-
- .weak SPI1_IRQHandler
- .thumb_set SPI1_IRQHandler,Default_Handler
-
- .weak SPI2_IRQHandler
- .thumb_set SPI2_IRQHandler,Default_Handler
-
- .weak USART1_IRQHandler
- .thumb_set USART1_IRQHandler,Default_Handler
-
- .weak USART2_IRQHandler
- .thumb_set USART2_IRQHandler,Default_Handler
-
- .weak USART3_IRQHandler
- .thumb_set USART3_IRQHandler,Default_Handler
-
- .weak EXTI15_10_IRQHandler
- .thumb_set EXTI15_10_IRQHandler,Default_Handler
-
- .weak RTC_Alarm_IRQHandler
- .thumb_set RTC_Alarm_IRQHandler,Default_Handler
-
- .weak USBWakeUp_IRQHandler
- .thumb_set USBWakeUp_IRQHandler,Default_Handler
-
- .weak TIM8_BRK_TIM12_IRQHandler
- .thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler
-
- .weak TIM8_UP_TIM13_IRQHandler
- .thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler
-
- .weak TIM8_TRG_COM_TIM14_IRQHandler
- .thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler
-
- .weak TIM8_CC_IRQHandler
- .thumb_set TIM8_CC_IRQHandler,Default_Handler
-
- .weak ADC3_IRQHandler
- .thumb_set ADC3_IRQHandler,Default_Handler
-
- .weak FSMC_IRQHandler
- .thumb_set FSMC_IRQHandler,Default_Handler
-
- .weak SDIO_IRQHandler
- .thumb_set SDIO_IRQHandler,Default_Handler
-
- .weak TIM5_IRQHandler
- .thumb_set TIM5_IRQHandler,Default_Handler
-
- .weak SPI3_IRQHandler
- .thumb_set SPI3_IRQHandler,Default_Handler
-
- .weak UART4_IRQHandler
- .thumb_set UART4_IRQHandler,Default_Handler
-
- .weak UART5_IRQHandler
- .thumb_set UART5_IRQHandler,Default_Handler
-
- .weak TIM6_IRQHandler
- .thumb_set TIM6_IRQHandler,Default_Handler
-
- .weak TIM7_IRQHandler
- .thumb_set TIM7_IRQHandler,Default_Handler
-
- .weak DMA2_Channel1_IRQHandler
- .thumb_set DMA2_Channel1_IRQHandler,Default_Handler
-
- .weak DMA2_Channel2_IRQHandler
- .thumb_set DMA2_Channel2_IRQHandler,Default_Handler
-
- .weak DMA2_Channel3_IRQHandler
- .thumb_set DMA2_Channel3_IRQHandler,Default_Handler
-
- .weak DMA2_Channel4_5_IRQHandler
- .thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/lib/cmsis-stm32f1/source/startup_stm32f105xc.s b/lib/cmsis-stm32f1/source/startup_stm32f105xc.s deleted file mode 100644 index dc57f1df..00000000 --- a/lib/cmsis-stm32f1/source/startup_stm32f105xc.s +++ /dev/null @@ -1,476 +0,0 @@ -/**
- *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
- * @file startup_stm32f105xc.s
- * @author MCD Application Team
- * @version V4.2.0
- * @date 31-March-2017
- * @brief STM32F105xC Devices vector table for Atollic toolchain.
- * This module performs:
- * - Set the initial SP
- * - Set the initial PC == Reset_Handler,
- * - Set the vector table entries with the exceptions ISR address
- * - Configure the clock system
- * - Branches to main in the C library (which eventually
- * calls main()).
- * After Reset the Cortex-M3 processor is in Thread mode,
- * priority is Privileged, and the Stack is set to Main.
- ******************************************************************************
- *
- * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
- .syntax unified
- .cpu cortex-m3
- .fpu softvfp
- .thumb
-
-.global g_pfnVectors
-.global Default_Handler
-
-/* start address for the initialization values of the .data section.
-defined in linker script */
-.word _sidata
-/* start address for the .data section. defined in linker script */
-.word _sdata
-/* end address for the .data section. defined in linker script */
-.word _edata
-/* start address for the .bss section. defined in linker script */
-.word _sbss
-/* end address for the .bss section. defined in linker script */
-.word _ebss
-
-.equ BootRAM, 0xF1E0F85F
-/**
- * @brief This is the code that gets called when the processor first
- * starts execution following a reset event. Only the absolutely
- * necessary set is performed, after which the application
- * supplied main() routine is called.
- * @param None
- * @retval : None
-*/
-
- .section .text.Reset_Handler
- .weak Reset_Handler
- .type Reset_Handler, %function
-Reset_Handler:
-
-/* Copy the data segment initializers from flash to SRAM */
- movs r1, #0
- b LoopCopyDataInit
-
-CopyDataInit:
- ldr r3, =_sidata
- ldr r3, [r3, r1]
- str r3, [r0, r1]
- adds r1, r1, #4
-
-LoopCopyDataInit:
- ldr r0, =_sdata
- ldr r3, =_edata
- adds r2, r0, r1
- cmp r2, r3
- bcc CopyDataInit
- ldr r2, =_sbss
- b LoopFillZerobss
-
-/* Zero fill the bss segment. */
-FillZerobss:
- movs r3, #0
- str r3, [r2], #4
-
-LoopFillZerobss:
- ldr r3, = _ebss
- cmp r2, r3
- bcc FillZerobss
-/* Call the clock system intitialization function.*/
- bl SystemInit
-/* Call the application's entry point.*/
- bl main
- bx lr
-.size Reset_Handler, .-Reset_Handler
-
-/**
- * @brief This is the code that gets called when the processor receives an
- * unexpected interrupt. This simply enters an infinite loop, preserving
- * the system state for examination by a debugger.
- * @param None
- * @retval None
-*/
- .section .text.Default_Handler,"ax",%progbits
-Default_Handler:
-Infinite_Loop:
- b Infinite_Loop
- .size Default_Handler, .-Default_Handler
-/******************************************************************************
-*
-* The minimal vector table for a Cortex M3. Note that the proper constructs
-* must be placed on this to ensure that it ends up at physical address
-* 0x0000.0000.
-*
-******************************************************************************/
- .section .isr_vector,"a",%progbits
- .type g_pfnVectors, %object
- .size g_pfnVectors, .-g_pfnVectors
-
-
-g_pfnVectors:
-
- .word _estack
- .word Reset_Handler
- .word NMI_Handler
- .word HardFault_Handler
- .word MemManage_Handler
- .word BusFault_Handler
- .word UsageFault_Handler
- .word 0
- .word 0
- .word 0
- .word 0
- .word SVC_Handler
- .word DebugMon_Handler
- .word 0
- .word PendSV_Handler
- .word SysTick_Handler
- .word WWDG_IRQHandler
- .word PVD_IRQHandler
- .word TAMPER_IRQHandler
- .word RTC_IRQHandler
- .word FLASH_IRQHandler
- .word RCC_IRQHandler
- .word EXTI0_IRQHandler
- .word EXTI1_IRQHandler
- .word EXTI2_IRQHandler
- .word EXTI3_IRQHandler
- .word EXTI4_IRQHandler
- .word DMA1_Channel1_IRQHandler
- .word DMA1_Channel2_IRQHandler
- .word DMA1_Channel3_IRQHandler
- .word DMA1_Channel4_IRQHandler
- .word DMA1_Channel5_IRQHandler
- .word DMA1_Channel6_IRQHandler
- .word DMA1_Channel7_IRQHandler
- .word ADC1_2_IRQHandler
- .word CAN1_TX_IRQHandler
- .word CAN1_RX0_IRQHandler
- .word CAN1_RX1_IRQHandler
- .word CAN1_SCE_IRQHandler
- .word EXTI9_5_IRQHandler
- .word TIM1_BRK_IRQHandler
- .word TIM1_UP_IRQHandler
- .word TIM1_TRG_COM_IRQHandler
- .word TIM1_CC_IRQHandler
- .word TIM2_IRQHandler
- .word TIM3_IRQHandler
- .word TIM4_IRQHandler
- .word I2C1_EV_IRQHandler
- .word I2C1_ER_IRQHandler
- .word I2C2_EV_IRQHandler
- .word I2C2_ER_IRQHandler
- .word SPI1_IRQHandler
- .word SPI2_IRQHandler
- .word USART1_IRQHandler
- .word USART2_IRQHandler
- .word USART3_IRQHandler
- .word EXTI15_10_IRQHandler
- .word RTC_Alarm_IRQHandler
- .word OTG_FS_WKUP_IRQHandler
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word TIM5_IRQHandler
- .word SPI3_IRQHandler
- .word UART4_IRQHandler
- .word UART5_IRQHandler
- .word TIM6_IRQHandler
- .word TIM7_IRQHandler
- .word DMA2_Channel1_IRQHandler
- .word DMA2_Channel2_IRQHandler
- .word DMA2_Channel3_IRQHandler
- .word DMA2_Channel4_IRQHandler
- .word DMA2_Channel5_IRQHandler
- .word 0
- .word 0
- .word CAN2_TX_IRQHandler
- .word CAN2_RX0_IRQHandler
- .word CAN2_RX1_IRQHandler
- .word CAN2_SCE_IRQHandler
- .word OTG_FS_IRQHandler
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word BootRAM /* @0x1E0. This is for boot in RAM mode for
- STM32F10x Connectivity line Devices. */
-
-/*******************************************************************************
-*
-* Provide weak aliases for each Exception handler to the Default_Handler.
-* As they are weak aliases, any function with the same name will override
-* this definition.
-*
-*******************************************************************************/
- .weak NMI_Handler
- .thumb_set NMI_Handler,Default_Handler
-
- .weak HardFault_Handler
- .thumb_set HardFault_Handler,Default_Handler
-
- .weak MemManage_Handler
- .thumb_set MemManage_Handler,Default_Handler
-
- .weak BusFault_Handler
- .thumb_set BusFault_Handler,Default_Handler
-
- .weak UsageFault_Handler
- .thumb_set UsageFault_Handler,Default_Handler
-
- .weak SVC_Handler
- .thumb_set SVC_Handler,Default_Handler
-
- .weak DebugMon_Handler
- .thumb_set DebugMon_Handler,Default_Handler
-
- .weak PendSV_Handler
- .thumb_set PendSV_Handler,Default_Handler
-
- .weak SysTick_Handler
- .thumb_set SysTick_Handler,Default_Handler
-
- .weak WWDG_IRQHandler
- .thumb_set WWDG_IRQHandler,Default_Handler
-
- .weak PVD_IRQHandler
- .thumb_set PVD_IRQHandler,Default_Handler
-
- .weak TAMPER_IRQHandler
- .thumb_set TAMPER_IRQHandler,Default_Handler
-
- .weak RTC_IRQHandler
- .thumb_set RTC_IRQHandler,Default_Handler
-
- .weak FLASH_IRQHandler
- .thumb_set FLASH_IRQHandler,Default_Handler
-
- .weak RCC_IRQHandler
- .thumb_set RCC_IRQHandler,Default_Handler
-
- .weak EXTI0_IRQHandler
- .thumb_set EXTI0_IRQHandler,Default_Handler
-
- .weak EXTI1_IRQHandler
- .thumb_set EXTI1_IRQHandler,Default_Handler
-
- .weak EXTI2_IRQHandler
- .thumb_set EXTI2_IRQHandler,Default_Handler
-
- .weak EXTI3_IRQHandler
- .thumb_set EXTI3_IRQHandler,Default_Handler
-
- .weak EXTI4_IRQHandler
- .thumb_set EXTI4_IRQHandler,Default_Handler
-
- .weak DMA1_Channel1_IRQHandler
- .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
-
- .weak DMA1_Channel2_IRQHandler
- .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
-
- .weak DMA1_Channel3_IRQHandler
- .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
-
- .weak DMA1_Channel4_IRQHandler
- .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
-
- .weak DMA1_Channel5_IRQHandler
- .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
-
- .weak DMA1_Channel6_IRQHandler
- .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
-
- .weak DMA1_Channel7_IRQHandler
- .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
-
- .weak ADC1_2_IRQHandler
- .thumb_set ADC1_2_IRQHandler,Default_Handler
-
- .weak CAN1_TX_IRQHandler
- .thumb_set CAN1_TX_IRQHandler,Default_Handler
-
- .weak CAN1_RX0_IRQHandler
- .thumb_set CAN1_RX0_IRQHandler,Default_Handler
-
- .weak CAN1_RX1_IRQHandler
- .thumb_set CAN1_RX1_IRQHandler,Default_Handler
-
- .weak CAN1_SCE_IRQHandler
- .thumb_set CAN1_SCE_IRQHandler,Default_Handler
-
- .weak EXTI9_5_IRQHandler
- .thumb_set EXTI9_5_IRQHandler,Default_Handler
-
- .weak TIM1_BRK_IRQHandler
- .thumb_set TIM1_BRK_IRQHandler,Default_Handler
-
- .weak TIM1_UP_IRQHandler
- .thumb_set TIM1_UP_IRQHandler,Default_Handler
-
- .weak TIM1_TRG_COM_IRQHandler
- .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
-
- .weak TIM1_CC_IRQHandler
- .thumb_set TIM1_CC_IRQHandler,Default_Handler
-
- .weak TIM2_IRQHandler
- .thumb_set TIM2_IRQHandler,Default_Handler
-
- .weak TIM3_IRQHandler
- .thumb_set TIM3_IRQHandler,Default_Handler
-
- .weak TIM4_IRQHandler
- .thumb_set TIM4_IRQHandler,Default_Handler
-
- .weak I2C1_EV_IRQHandler
- .thumb_set I2C1_EV_IRQHandler,Default_Handler
-
- .weak I2C1_ER_IRQHandler
- .thumb_set I2C1_ER_IRQHandler,Default_Handler
-
- .weak I2C2_EV_IRQHandler
- .thumb_set I2C2_EV_IRQHandler,Default_Handler
-
- .weak I2C2_ER_IRQHandler
- .thumb_set I2C2_ER_IRQHandler,Default_Handler
-
- .weak SPI1_IRQHandler
- .thumb_set SPI1_IRQHandler,Default_Handler
-
- .weak SPI2_IRQHandler
- .thumb_set SPI2_IRQHandler,Default_Handler
-
- .weak USART1_IRQHandler
- .thumb_set USART1_IRQHandler,Default_Handler
-
- .weak USART2_IRQHandler
- .thumb_set USART2_IRQHandler,Default_Handler
-
- .weak USART3_IRQHandler
- .thumb_set USART3_IRQHandler,Default_Handler
-
- .weak EXTI15_10_IRQHandler
- .thumb_set EXTI15_10_IRQHandler,Default_Handler
-
- .weak RTC_Alarm_IRQHandler
- .thumb_set RTC_Alarm_IRQHandler,Default_Handler
-
- .weak OTG_FS_WKUP_IRQHandler
- .thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler
-
- .weak TIM5_IRQHandler
- .thumb_set TIM5_IRQHandler,Default_Handler
-
- .weak SPI3_IRQHandler
- .thumb_set SPI3_IRQHandler,Default_Handler
-
- .weak UART4_IRQHandler
- .thumb_set UART4_IRQHandler,Default_Handler
-
- .weak UART5_IRQHandler
- .thumb_set UART5_IRQHandler,Default_Handler
-
- .weak TIM6_IRQHandler
- .thumb_set TIM6_IRQHandler,Default_Handler
-
- .weak TIM7_IRQHandler
- .thumb_set TIM7_IRQHandler,Default_Handler
-
- .weak DMA2_Channel1_IRQHandler
- .thumb_set DMA2_Channel1_IRQHandler,Default_Handler
-
- .weak DMA2_Channel2_IRQHandler
- .thumb_set DMA2_Channel2_IRQHandler,Default_Handler
-
- .weak DMA2_Channel3_IRQHandler
- .thumb_set DMA2_Channel3_IRQHandler,Default_Handler
-
- .weak DMA2_Channel4_IRQHandler
- .thumb_set DMA2_Channel4_IRQHandler,Default_Handler
-
- .weak DMA2_Channel5_IRQHandler
- .thumb_set DMA2_Channel5_IRQHandler,Default_Handler
-
- .weak CAN2_TX_IRQHandler
- .thumb_set CAN2_TX_IRQHandler,Default_Handler
-
- .weak CAN2_RX0_IRQHandler
- .thumb_set CAN2_RX0_IRQHandler,Default_Handler
-
- .weak CAN2_RX1_IRQHandler
- .thumb_set CAN2_RX1_IRQHandler,Default_Handler
-
- .weak CAN2_SCE_IRQHandler
- .thumb_set CAN2_SCE_IRQHandler,Default_Handler
-
- .weak OTG_FS_IRQHandler
- .thumb_set OTG_FS_IRQHandler ,Default_Handler
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/lib/cmsis-stm32f1/source/startup_stm32f107xc.s b/lib/cmsis-stm32f1/source/startup_stm32f107xc.s deleted file mode 100644 index 35bf316b..00000000 --- a/lib/cmsis-stm32f1/source/startup_stm32f107xc.s +++ /dev/null @@ -1,487 +0,0 @@ -/**
- *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
- * @file startup_stm32f107xc.s
- * @author MCD Application Team
- * @version V4.2.0
- * @date 31-March-2017
- * @brief STM32F107xC Devices vector table for Atollic toolchain.
- * This module performs:
- * - Set the initial SP
- * - Set the initial PC == Reset_Handler,
- * - Set the vector table entries with the exceptions ISR address
- * - Configure the clock system
- * - Branches to main in the C library (which eventually
- * calls main()).
- * After Reset the Cortex-M3 processor is in Thread mode,
- * priority is Privileged, and the Stack is set to Main.
- ******************************************************************************
- *
- * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
- .syntax unified
- .cpu cortex-m3
- .fpu softvfp
- .thumb
-
-.global g_pfnVectors
-.global Default_Handler
-
-/* start address for the initialization values of the .data section.
-defined in linker script */
-.word _sidata
-/* start address for the .data section. defined in linker script */
-.word _sdata
-/* end address for the .data section. defined in linker script */
-.word _edata
-/* start address for the .bss section. defined in linker script */
-.word _sbss
-/* end address for the .bss section. defined in linker script */
-.word _ebss
-
-.equ BootRAM, 0xF1E0F85F
-/**
- * @brief This is the code that gets called when the processor first
- * starts execution following a reset event. Only the absolutely
- * necessary set is performed, after which the application
- * supplied main() routine is called.
- * @param None
- * @retval : None
-*/
-
- .section .text.Reset_Handler
- .weak Reset_Handler
- .type Reset_Handler, %function
-Reset_Handler:
-
-/* Copy the data segment initializers from flash to SRAM */
- movs r1, #0
- b LoopCopyDataInit
-
-CopyDataInit:
- ldr r3, =_sidata
- ldr r3, [r3, r1]
- str r3, [r0, r1]
- adds r1, r1, #4
-
-LoopCopyDataInit:
- ldr r0, =_sdata
- ldr r3, =_edata
- adds r2, r0, r1
- cmp r2, r3
- bcc CopyDataInit
- ldr r2, =_sbss
- b LoopFillZerobss
-
-/* Zero fill the bss segment. */
-FillZerobss:
- movs r3, #0
- str r3, [r2], #4
-
-LoopFillZerobss:
- ldr r3, = _ebss
- cmp r2, r3
- bcc FillZerobss
-
-/* Call the clock system intitialization function.*/
- bl SystemInit
-/* Call static constructors */
- bl __libc_init_array
-/* Call the application's entry point.*/
- bl main
- bx lr
-.size Reset_Handler, .-Reset_Handler
-
-/**
- * @brief This is the code that gets called when the processor receives an
- * unexpected interrupt. This simply enters an infinite loop, preserving
- * the system state for examination by a debugger.
- *
- * @param None
- * @retval : None
-*/
- .section .text.Default_Handler,"ax",%progbits
-Default_Handler:
-Infinite_Loop:
- b Infinite_Loop
- .size Default_Handler, .-Default_Handler
-
-/******************************************************************************
-*
-* The minimal vector table for a Cortex M3. Note that the proper constructs
-* must be placed on this to ensure that it ends up at physical address
-* 0x0000.0000.
-*
-******************************************************************************/
- .section .isr_vector,"a",%progbits
- .type g_pfnVectors, %object
- .size g_pfnVectors, .-g_pfnVectors
-
-
-g_pfnVectors:
-
- .word _estack
- .word Reset_Handler
- .word NMI_Handler
- .word HardFault_Handler
- .word MemManage_Handler
- .word BusFault_Handler
- .word UsageFault_Handler
- .word 0
- .word 0
- .word 0
- .word 0
- .word SVC_Handler
- .word DebugMon_Handler
- .word 0
- .word PendSV_Handler
- .word SysTick_Handler
- .word WWDG_IRQHandler
- .word PVD_IRQHandler
- .word TAMPER_IRQHandler
- .word RTC_IRQHandler
- .word FLASH_IRQHandler
- .word RCC_IRQHandler
- .word EXTI0_IRQHandler
- .word EXTI1_IRQHandler
- .word EXTI2_IRQHandler
- .word EXTI3_IRQHandler
- .word EXTI4_IRQHandler
- .word DMA1_Channel1_IRQHandler
- .word DMA1_Channel2_IRQHandler
- .word DMA1_Channel3_IRQHandler
- .word DMA1_Channel4_IRQHandler
- .word DMA1_Channel5_IRQHandler
- .word DMA1_Channel6_IRQHandler
- .word DMA1_Channel7_IRQHandler
- .word ADC1_2_IRQHandler
- .word CAN1_TX_IRQHandler
- .word CAN1_RX0_IRQHandler
- .word CAN1_RX1_IRQHandler
- .word CAN1_SCE_IRQHandler
- .word EXTI9_5_IRQHandler
- .word TIM1_BRK_IRQHandler
- .word TIM1_UP_IRQHandler
- .word TIM1_TRG_COM_IRQHandler
- .word TIM1_CC_IRQHandler
- .word TIM2_IRQHandler
- .word TIM3_IRQHandler
- .word TIM4_IRQHandler
- .word I2C1_EV_IRQHandler
- .word I2C1_ER_IRQHandler
- .word I2C2_EV_IRQHandler
- .word I2C2_ER_IRQHandler
- .word SPI1_IRQHandler
- .word SPI2_IRQHandler
- .word USART1_IRQHandler
- .word USART2_IRQHandler
- .word USART3_IRQHandler
- .word EXTI15_10_IRQHandler
- .word RTC_Alarm_IRQHandler
- .word OTG_FS_WKUP_IRQHandler
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word TIM5_IRQHandler
- .word SPI3_IRQHandler
- .word UART4_IRQHandler
- .word UART5_IRQHandler
- .word TIM6_IRQHandler
- .word TIM7_IRQHandler
- .word DMA2_Channel1_IRQHandler
- .word DMA2_Channel2_IRQHandler
- .word DMA2_Channel3_IRQHandler
- .word DMA2_Channel4_IRQHandler
- .word DMA2_Channel5_IRQHandler
- .word ETH_IRQHandler
- .word ETH_WKUP_IRQHandler
- .word CAN2_TX_IRQHandler
- .word CAN2_RX0_IRQHandler
- .word CAN2_RX1_IRQHandler
- .word CAN2_SCE_IRQHandler
- .word OTG_FS_IRQHandler
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word BootRAM /* @0x1E0. This is for boot in RAM mode for
- STM32F10x Connectivity line Devices. */
-
-/*******************************************************************************
-*
-* Provide weak aliases for each Exception handler to the Default_Handler.
-* As they are weak aliases, any function with the same name will override
-* this definition.
-*
-*******************************************************************************/
- .weak NMI_Handler
- .thumb_set NMI_Handler,Default_Handler
-
- .weak HardFault_Handler
- .thumb_set HardFault_Handler,Default_Handler
-
- .weak MemManage_Handler
- .thumb_set MemManage_Handler,Default_Handler
-
- .weak BusFault_Handler
- .thumb_set BusFault_Handler,Default_Handler
-
- .weak UsageFault_Handler
- .thumb_set UsageFault_Handler,Default_Handler
-
- .weak SVC_Handler
- .thumb_set SVC_Handler,Default_Handler
-
- .weak DebugMon_Handler
- .thumb_set DebugMon_Handler,Default_Handler
-
- .weak PendSV_Handler
- .thumb_set PendSV_Handler,Default_Handler
-
- .weak SysTick_Handler
- .thumb_set SysTick_Handler,Default_Handler
-
- .weak WWDG_IRQHandler
- .thumb_set WWDG_IRQHandler,Default_Handler
-
- .weak PVD_IRQHandler
- .thumb_set PVD_IRQHandler,Default_Handler
-
- .weak TAMPER_IRQHandler
- .thumb_set TAMPER_IRQHandler,Default_Handler
-
- .weak RTC_IRQHandler
- .thumb_set RTC_IRQHandler,Default_Handler
-
- .weak FLASH_IRQHandler
- .thumb_set FLASH_IRQHandler,Default_Handler
-
- .weak RCC_IRQHandler
- .thumb_set RCC_IRQHandler,Default_Handler
-
- .weak EXTI0_IRQHandler
- .thumb_set EXTI0_IRQHandler,Default_Handler
-
- .weak EXTI1_IRQHandler
- .thumb_set EXTI1_IRQHandler,Default_Handler
-
- .weak EXTI2_IRQHandler
- .thumb_set EXTI2_IRQHandler,Default_Handler
-
- .weak EXTI3_IRQHandler
- .thumb_set EXTI3_IRQHandler,Default_Handler
-
- .weak EXTI4_IRQHandler
- .thumb_set EXTI4_IRQHandler,Default_Handler
-
- .weak DMA1_Channel1_IRQHandler
- .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
-
- .weak DMA1_Channel2_IRQHandler
- .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
-
- .weak DMA1_Channel3_IRQHandler
- .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
-
- .weak DMA1_Channel4_IRQHandler
- .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
-
- .weak DMA1_Channel5_IRQHandler
- .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
-
- .weak DMA1_Channel6_IRQHandler
- .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
-
- .weak DMA1_Channel7_IRQHandler
- .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
-
- .weak ADC1_2_IRQHandler
- .thumb_set ADC1_2_IRQHandler,Default_Handler
-
- .weak CAN1_TX_IRQHandler
- .thumb_set CAN1_TX_IRQHandler,Default_Handler
-
- .weak CAN1_RX0_IRQHandler
- .thumb_set CAN1_RX0_IRQHandler,Default_Handler
-
- .weak CAN1_RX1_IRQHandler
- .thumb_set CAN1_RX1_IRQHandler,Default_Handler
-
- .weak CAN1_SCE_IRQHandler
- .thumb_set CAN1_SCE_IRQHandler,Default_Handler
-
- .weak EXTI9_5_IRQHandler
- .thumb_set EXTI9_5_IRQHandler,Default_Handler
-
- .weak TIM1_BRK_IRQHandler
- .thumb_set TIM1_BRK_IRQHandler,Default_Handler
-
- .weak TIM1_UP_IRQHandler
- .thumb_set TIM1_UP_IRQHandler,Default_Handler
-
- .weak TIM1_TRG_COM_IRQHandler
- .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
-
- .weak TIM1_CC_IRQHandler
- .thumb_set TIM1_CC_IRQHandler,Default_Handler
-
- .weak TIM2_IRQHandler
- .thumb_set TIM2_IRQHandler,Default_Handler
-
- .weak TIM3_IRQHandler
- .thumb_set TIM3_IRQHandler,Default_Handler
-
- .weak TIM4_IRQHandler
- .thumb_set TIM4_IRQHandler,Default_Handler
-
- .weak I2C1_EV_IRQHandler
- .thumb_set I2C1_EV_IRQHandler,Default_Handler
-
- .weak I2C1_ER_IRQHandler
- .thumb_set I2C1_ER_IRQHandler,Default_Handler
-
- .weak I2C2_EV_IRQHandler
- .thumb_set I2C2_EV_IRQHandler,Default_Handler
-
- .weak I2C2_ER_IRQHandler
- .thumb_set I2C2_ER_IRQHandler,Default_Handler
-
- .weak SPI1_IRQHandler
- .thumb_set SPI1_IRQHandler,Default_Handler
-
- .weak SPI2_IRQHandler
- .thumb_set SPI2_IRQHandler,Default_Handler
-
- .weak USART1_IRQHandler
- .thumb_set USART1_IRQHandler,Default_Handler
-
- .weak USART2_IRQHandler
- .thumb_set USART2_IRQHandler,Default_Handler
-
- .weak USART3_IRQHandler
- .thumb_set USART3_IRQHandler,Default_Handler
-
- .weak EXTI15_10_IRQHandler
- .thumb_set EXTI15_10_IRQHandler,Default_Handler
-
- .weak RTC_Alarm_IRQHandler
- .thumb_set RTC_Alarm_IRQHandler,Default_Handler
-
- .weak OTG_FS_WKUP_IRQHandler
- .thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler
-
- .weak TIM5_IRQHandler
- .thumb_set TIM5_IRQHandler,Default_Handler
-
- .weak SPI3_IRQHandler
- .thumb_set SPI3_IRQHandler,Default_Handler
-
- .weak UART4_IRQHandler
- .thumb_set UART4_IRQHandler,Default_Handler
-
- .weak UART5_IRQHandler
- .thumb_set UART5_IRQHandler,Default_Handler
-
- .weak TIM6_IRQHandler
- .thumb_set TIM6_IRQHandler,Default_Handler
-
- .weak TIM7_IRQHandler
- .thumb_set TIM7_IRQHandler,Default_Handler
-
- .weak DMA2_Channel1_IRQHandler
- .thumb_set DMA2_Channel1_IRQHandler,Default_Handler
-
- .weak DMA2_Channel2_IRQHandler
- .thumb_set DMA2_Channel2_IRQHandler,Default_Handler
-
- .weak DMA2_Channel3_IRQHandler
- .thumb_set DMA2_Channel3_IRQHandler,Default_Handler
-
- .weak DMA2_Channel4_IRQHandler
- .thumb_set DMA2_Channel4_IRQHandler,Default_Handler
-
- .weak DMA2_Channel5_IRQHandler
- .thumb_set DMA2_Channel5_IRQHandler,Default_Handler
-
- .weak ETH_IRQHandler
- .thumb_set ETH_IRQHandler,Default_Handler
-
- .weak ETH_WKUP_IRQHandler
- .thumb_set ETH_WKUP_IRQHandler,Default_Handler
-
- .weak CAN2_TX_IRQHandler
- .thumb_set CAN2_TX_IRQHandler,Default_Handler
-
- .weak CAN2_RX0_IRQHandler
- .thumb_set CAN2_RX0_IRQHandler,Default_Handler
-
- .weak CAN2_RX1_IRQHandler
- .thumb_set CAN2_RX1_IRQHandler,Default_Handler
-
- .weak CAN2_SCE_IRQHandler
- .thumb_set CAN2_SCE_IRQHandler,Default_Handler
-
- .weak OTG_FS_IRQHandler
- .thumb_set OTG_FS_IRQHandler ,Default_Handler
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/lib/cmsis-stm32f1/source/stm32f1.ld b/lib/cmsis-stm32f1/source/stm32f1.ld deleted file mode 100644 index 112d0fc0..00000000 --- a/lib/cmsis-stm32f1/source/stm32f1.ld +++ /dev/null @@ -1,112 +0,0 @@ -/* - Generic Cortex-M linker script - Public Domain -*/ - -ENTRY(Reset_Handler) - -MEMORY -{ - FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 64K - RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 20K -} - -/* highest address of the user mode stack */ -_estack = 0x20005000; - -SECTIONS -{ - /* Interrupt vector table */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) - . = ALIGN(4); - } >FLASH - - /* Program code and constant data */ - .text : - { - . = ALIGN(4); - *(.text) - *(.text*) - *(.rodata) - *(.rodata*) - KEEP (*(.init)) - KEEP (*(.fini)) - . = ALIGN(4); - _etext = .; - } >FLASH - - /* Exception handling */ - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - /* Static constructor initialization (C++) */ - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - - /* Initialized data, needs to be handled by startup code */ - _sidata = .; - .data : AT (_sidata) - { - . = ALIGN(4); - _sdata = . ; - _data = . ; - *(.data) - *(.data*) - *(.RAMtext) - . = ALIGN(4); - _edata = . ; - } >RAM - - /* Uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = .; - __bss_start__ = .; - _bss = .; - *(.bss) - *(.bss*) - *(COMMON) - . = ALIGN(4); - _ebss = .; - __bss_end__ = _ebss; - } >RAM - - /* Pointers to end of data for dynamic memory management */ - PROVIDE (end = _ebss); - PROVIDE (_end = _ebss); - - /* Remove debugging from standard libraries */ - /DISCARD/ : - { - libc.a (*) - libm.a (*) - libgcc.a (*) - } -} diff --git a/lib/cmsis-stm32f1/source/system_stm32f1xx.c b/lib/cmsis-stm32f1/source/system_stm32f1xx.c deleted file mode 100644 index c5512d76..00000000 --- a/lib/cmsis-stm32f1/source/system_stm32f1xx.c +++ /dev/null @@ -1,448 +0,0 @@ -/**
- ******************************************************************************
- * @file system_stm32f1xx.c
- * @author MCD Application Team
- * @version V4.2.0
- * @date 31-March-2017
- * @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Source File.
- *
- * 1. This file provides two functions and one global variable to be called from
- * user application:
- * - SystemInit(): Setups the system clock (System clock source, PLL Multiplier
- * factors, AHB/APBx prescalers and Flash settings).
- * This function is called at startup just after reset and
- * before branch to main program. This call is made inside
- * the "startup_stm32f1xx_xx.s" file.
- *
- * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
- * by the user application to setup the SysTick
- * timer or configure other parameters.
- *
- * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
- * be called whenever the core clock is changed
- * during program execution.
- *
- * 2. After each device reset the HSI (8 MHz) is used as system clock source.
- * Then SystemInit() function is called, in "startup_stm32f1xx_xx.s" file, to
- * configure the system clock before to branch to main program.
- *
- * 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depending on
- * the product used), refer to "HSE_VALUE".
- * When HSE is used as system clock source, directly or through PLL, and you
- * are using different crystal you have to adapt the HSE value to your own
- * configuration.
- *
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/** @addtogroup CMSIS
- * @{
- */
-
-/** @addtogroup stm32f1xx_system
- * @{
- */
-
-/** @addtogroup STM32F1xx_System_Private_Includes
- * @{
- */
-
-#include "stm32f1xx.h"
-
-/**
- * @}
- */
-
-/** @addtogroup STM32F1xx_System_Private_TypesDefinitions
- * @{
- */
-
-/**
- * @}
- */
-
-/** @addtogroup STM32F1xx_System_Private_Defines
- * @{
- */
-
-#if !defined (HSE_VALUE)
- #define HSE_VALUE 8000000U /*!< Default value of the External oscillator in Hz.
- This value can be provided and adapted by the user application. */
-#endif /* HSE_VALUE */
-
-#if !defined (HSI_VALUE)
- #define HSI_VALUE 8000000U /*!< Default value of the Internal oscillator in Hz.
- This value can be provided and adapted by the user application. */
-#endif /* HSI_VALUE */
-
-/*!< Uncomment the following line if you need to use external SRAM */
-#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
-/* #define DATA_IN_ExtSRAM */
-#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
-
-/*!< Uncomment the following line if you need to relocate your vector Table in
- Internal SRAM. */
-/* #define VECT_TAB_SRAM */
-#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field.
- This value must be a multiple of 0x200. */
-
-
-/**
- * @}
- */
-
-/** @addtogroup STM32F1xx_System_Private_Macros
- * @{
- */
-
-/**
- * @}
- */
-
-/** @addtogroup STM32F1xx_System_Private_Variables
- * @{
- */
-
-/*******************************************************************************
-* Clock Definitions
-*******************************************************************************/
-#if defined(STM32F100xB) ||defined(STM32F100xE)
- uint32_t SystemCoreClock = 24000000U; /*!< System Clock Frequency (Core Clock) */
-#else /*!< HSI Selected as System Clock source */
- uint32_t SystemCoreClock = 72000000U; /*!< System Clock Frequency (Core Clock) */
-#endif
-
-const uint8_t AHBPrescTable[16U] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
-const uint8_t APBPrescTable[8U] = {0, 0, 0, 0, 1, 2, 3, 4};
-
-/**
- * @}
- */
-
-/** @addtogroup STM32F1xx_System_Private_FunctionPrototypes
- * @{
- */
-
-#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
-#ifdef DATA_IN_ExtSRAM
- static void SystemInit_ExtMemCtl(void);
-#endif /* DATA_IN_ExtSRAM */
-#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
-
-/**
- * @}
- */
-
-/** @addtogroup STM32F1xx_System_Private_Functions
- * @{
- */
-
-/**
- * @brief Setup the microcontroller system
- * Initialize the Embedded Flash Interface, the PLL and update the
- * SystemCoreClock variable.
- * @note This function should be used only after reset.
- * @param None
- * @retval None
- */
-__attribute__((used)) void SystemInit (void)
-{
- /* Reset the RCC clock configuration to the default reset state(for debug purpose) */
- /* Set HSION bit */
- RCC->CR |= 0x00000001U;
-
- /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */
-#if !defined(STM32F105xC) && !defined(STM32F107xC)
- RCC->CFGR &= 0xF8FF0000U;
-#else
- RCC->CFGR &= 0xF0FF0000U;
-#endif /* STM32F105xC */
-
- /* Reset HSEON, CSSON and PLLON bits */
- RCC->CR &= 0xFEF6FFFFU;
-
- /* Reset HSEBYP bit */
- RCC->CR &= 0xFFFBFFFFU;
-
- /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */
- RCC->CFGR &= 0xFF80FFFFU;
-
-#if defined(STM32F105xC) || defined(STM32F107xC)
- /* Reset PLL2ON and PLL3ON bits */
- RCC->CR &= 0xEBFFFFFFU;
-
- /* Disable all interrupts and clear pending bits */
- RCC->CIR = 0x00FF0000U;
-
- /* Reset CFGR2 register */
- RCC->CFGR2 = 0x00000000U;
-#elif defined(STM32F100xB) || defined(STM32F100xE)
- /* Disable all interrupts and clear pending bits */
- RCC->CIR = 0x009F0000U;
-
- /* Reset CFGR2 register */
- RCC->CFGR2 = 0x00000000U;
-#else
- /* Disable all interrupts and clear pending bits */
- RCC->CIR = 0x009F0000U;
-#endif /* STM32F105xC */
-
-#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
- #ifdef DATA_IN_ExtSRAM
- SystemInit_ExtMemCtl();
- #endif /* DATA_IN_ExtSRAM */
-#endif
-
-#ifdef VECT_TAB_SRAM
- SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */
-#else
- SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */
-#endif
-}
-
-/**
- * @brief Update SystemCoreClock variable according to Clock Register Values.
- * The SystemCoreClock variable contains the core clock (HCLK), it can
- * be used by the user application to setup the SysTick timer or configure
- * other parameters.
- *
- * @note Each time the core clock (HCLK) changes, this function must be called
- * to update SystemCoreClock variable value. Otherwise, any configuration
- * based on this variable will be incorrect.
- *
- * @note - The system frequency computed by this function is not the real
- * frequency in the chip. It is calculated based on the predefined
- * constant and the selected clock source:
- *
- * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
- *
- * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
- *
- * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
- * or HSI_VALUE(*) multiplied by the PLL factors.
- *
- * (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value
- * 8 MHz) but the real value may vary depending on the variations
- * in voltage and temperature.
- *
- * (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value
- * 8 MHz or 25 MHz, depending on the product used), user has to ensure
- * that HSE_VALUE is same as the real frequency of the crystal used.
- * Otherwise, this function may have wrong result.
- *
- * - The result of this function could be not correct when using fractional
- * value for HSE crystal.
- * @param None
- * @retval None
- */
-void SystemCoreClockUpdate (void)
-{
- uint32_t tmp = 0U, pllmull = 0U, pllsource = 0U;
-
-#if defined(STM32F105xC) || defined(STM32F107xC)
- uint32_t prediv1source = 0U, prediv1factor = 0U, prediv2factor = 0U, pll2mull = 0U;
-#endif /* STM32F105xC */
-
-#if defined(STM32F100xB) || defined(STM32F100xE)
- uint32_t prediv1factor = 0U;
-#endif /* STM32F100xB or STM32F100xE */
-
- /* Get SYSCLK source -------------------------------------------------------*/
- tmp = RCC->CFGR & RCC_CFGR_SWS;
-
- switch (tmp)
- {
- case 0x00U: /* HSI used as system clock */
- SystemCoreClock = HSI_VALUE;
- break;
- case 0x04U: /* HSE used as system clock */
- SystemCoreClock = HSE_VALUE;
- break;
- case 0x08U: /* PLL used as system clock */
-
- /* Get PLL clock source and multiplication factor ----------------------*/
- pllmull = RCC->CFGR & RCC_CFGR_PLLMULL;
- pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
-
-#if !defined(STM32F105xC) && !defined(STM32F107xC)
- pllmull = ( pllmull >> 18U) + 2U;
-
- if (pllsource == 0x00U)
- {
- /* HSI oscillator clock divided by 2 selected as PLL clock entry */
- SystemCoreClock = (HSI_VALUE >> 1U) * pllmull;
- }
- else
- {
- #if defined(STM32F100xB) || defined(STM32F100xE)
- prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1U;
- /* HSE oscillator clock selected as PREDIV1 clock entry */
- SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;
- #else
- /* HSE selected as PLL clock entry */
- if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET)
- {/* HSE oscillator clock divided by 2 */
- SystemCoreClock = (HSE_VALUE >> 1U) * pllmull;
- }
- else
- {
- SystemCoreClock = HSE_VALUE * pllmull;
- }
- #endif
- }
-#else
- pllmull = pllmull >> 18U;
-
- if (pllmull != 0x0DU)
- {
- pllmull += 2U;
- }
- else
- { /* PLL multiplication factor = PLL input clock * 6.5 */
- pllmull = 13U / 2U;
- }
-
- if (pllsource == 0x00U)
- {
- /* HSI oscillator clock divided by 2 selected as PLL clock entry */
- SystemCoreClock = (HSI_VALUE >> 1U) * pllmull;
- }
- else
- {/* PREDIV1 selected as PLL clock entry */
-
- /* Get PREDIV1 clock source and division factor */
- prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC;
- prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1U;
-
- if (prediv1source == 0U)
- {
- /* HSE oscillator clock selected as PREDIV1 clock entry */
- SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;
- }
- else
- {/* PLL2 clock selected as PREDIV1 clock entry */
-
- /* Get PREDIV2 division factor and PLL2 multiplication factor */
- prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4U) + 1U;
- pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8U) + 2U;
- SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull;
- }
- }
-#endif /* STM32F105xC */
- break;
-
- default:
- SystemCoreClock = HSI_VALUE;
- break;
- }
-
- /* Compute HCLK clock frequency ----------------*/
- /* Get HCLK prescaler */
- tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4U)];
- /* HCLK clock frequency */
- SystemCoreClock >>= tmp;
-}
-
-#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
-/**
- * @brief Setup the external memory controller. Called in startup_stm32f1xx.s
- * before jump to __main
- * @param None
- * @retval None
- */
-#ifdef DATA_IN_ExtSRAM
-/**
- * @brief Setup the external memory controller.
- * Called in startup_stm32f1xx_xx.s/.c before jump to main.
- * This function configures the external SRAM mounted on STM3210E-EVAL
- * board (STM32 High density devices). This SRAM will be used as program
- * data memory (including heap and stack).
- * @param None
- * @retval None
- */
-void SystemInit_ExtMemCtl(void)
-{
- __IO uint32_t tmpreg;
- /*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is
- required, then adjust the Register Addresses */
-
- /* Enable FSMC clock */
- RCC->AHBENR = 0x00000114U;
-
- /* Delay after an RCC peripheral clock enabling */
- tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FSMCEN);
-
- /* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */
- RCC->APB2ENR = 0x000001E0U;
-
- /* Delay after an RCC peripheral clock enabling */
- tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPDEN);
-
- (void)(tmpreg);
-
-/* --------------- SRAM Data lines, NOE and NWE configuration ---------------*/
-/*---------------- SRAM Address lines configuration -------------------------*/
-/*---------------- NOE and NWE configuration --------------------------------*/
-/*---------------- NE3 configuration ----------------------------------------*/
-/*---------------- NBL0, NBL1 configuration ---------------------------------*/
-
- GPIOD->CRL = 0x44BB44BBU;
- GPIOD->CRH = 0xBBBBBBBBU;
-
- GPIOE->CRL = 0xB44444BBU;
- GPIOE->CRH = 0xBBBBBBBBU;
-
- GPIOF->CRL = 0x44BBBBBBU;
- GPIOF->CRH = 0xBBBB4444U;
-
- GPIOG->CRL = 0x44BBBBBBU;
- GPIOG->CRH = 0x444B4B44U;
-
-/*---------------- FSMC Configuration ---------------------------------------*/
-/*---------------- Enable FSMC Bank1_SRAM Bank ------------------------------*/
-
- FSMC_Bank1->BTCR[4U] = 0x00001091U;
- FSMC_Bank1->BTCR[5U] = 0x00110212U;
-}
-#endif /* DATA_IN_ExtSRAM */
-#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|