diff options
Diffstat (limited to 'klippy')
| -rw-r--r-- | klippy/klippy.py | 3 | ||||
| -rw-r--r-- | klippy/mcu.py | 30 |
2 files changed, 29 insertions, 4 deletions
diff --git a/klippy/klippy.py b/klippy/klippy.py index ae4ea656..60bb9359 100644 --- a/klippy/klippy.py +++ b/klippy/klippy.py @@ -242,8 +242,7 @@ class Printer: def note_shutdown(self, msg): if self.state_message == message_ready: self.need_dump_debug = True - self.state_message = "Firmware shutdown: %s%s" % ( - msg, message_shutdown) + self.state_message = "%s%s" % (msg, message_shutdown) self.gcode.set_printer_ready(False) def note_mcu_error(self, msg): self.state_message = "%s%s" % (msg, message_restart) diff --git a/klippy/mcu.py b/klippy/mcu.py index 7724e63e..c0fc8f6d 100644 --- a/klippy/mcu.py +++ b/klippy/mcu.py @@ -475,13 +475,16 @@ class MCU: if self.is_shutdown: return self.is_shutdown = True - self._shutdown_msg = params['#msg'] + self._shutdown_msg = msg = params['#msg'] logging.info("%s: %s" % (params['#name'], self._shutdown_msg)) pst = self._print_start_time logging.info("Clock last synchronized at %.6f (%d)" % ( pst, int(pst * self._mcu_freq))) self.serial.dump_debug() - self._printer.note_shutdown(self._shutdown_msg) + prefix = "MCU shutdown: " + if params['#name'] == 'is_shutdown': + prefix = "Previous MCU shutdown: " + self._printer.note_shutdown(prefix + msg + error_help(msg)) # Connection phase def _check_restart(self, reason): start_reason = self._printer.get_start_args().get("start_reason") @@ -742,5 +745,28 @@ class MCU: def __del__(self): self.disconnect() +Common_MCU_errors = { + ("Timer too close", "No next step", "Missed scheduling of next "): """ +This is generally indicative of an intermittent +communication failure.""", + ("ADC out of range",): """ +This generally occurs when a heater temperature exceeds +it's configured min_temp or max_temp.""", + ("Rescheduled timer in the past", "Stepper too far in past"): """ +This generally occurs when the micro-controller has been +requested to step at a rate higher than it is capable of +obtaining.""", + ("Command request",): """ +This generally occurs in response to an M112 G-Code command +or in response to an internal error in the host software.""", +} + +def error_help(msg): + for prefixes, help_msg in Common_MCU_errors.items(): + for prefix in prefixes: + if msg.startswith(prefix): + return help_msg + return "" + def add_printer_objects(printer, config): printer.add_object('mcu', MCU(printer, config.getsection('mcu'))) |