diff options
Diffstat (limited to 'klippy/gcode.py')
| -rw-r--r-- | klippy/gcode.py | 35 |
1 files changed, 3 insertions, 32 deletions
diff --git a/klippy/gcode.py b/klippy/gcode.py index 86481789..486df2d6 100644 --- a/klippy/gcode.py +++ b/klippy/gcode.py @@ -399,27 +399,6 @@ class GCodeParser: print_time = self.toolhead.get_last_move_time() self.respond(self._get_temp(eventtime)) eventtime = self.reactor.pause(eventtime + 1.) - def _set_temp(self, params, wait=False): - temp = self.get_float('S', params, 0.) - heater = None - if 'T' in params: - index = self.get_int('T', params, minval=0) - section = 'extruder' - if index: - section = 'extruder%d' % (index,) - extruder = self.printer.lookup_object(section, None) - if extruder is not None: - heater = extruder.get_heater() - else: - heater = self.toolhead.get_extruder().get_heater() - if heater is None: - if temp > 0.: - self.respond_error("Heater not configured") - return - print_time = self.toolhead.get_last_move_time() - heater.set_temp(print_time, temp) - if wait and temp: - self.wait_for_temperature(heater) # G-Code special command handlers def cmd_default(self, params): if not self.is_printer_ready: @@ -435,7 +414,7 @@ class GCodeParser: if handler is not None: handler(params) return - elif cmd == 'M140' and not self.get_float('S', params, 0.): + elif cmd in ['M140', 'M104'] and not self.get_float('S', params, 0.): # Don't warn about requests to turn off heaters when not present return elif cmd == 'M107' or (cmd == 'M106' and ( @@ -457,8 +436,7 @@ class GCodeParser: 'G1', 'G4', 'G28', 'M400', 'G20', 'M82', 'M83', 'G90', 'G91', 'G92', 'M114', 'M220', 'M221', 'SET_GCODE_OFFSET', 'SAVE_GCODE_STATE', 'RESTORE_GCODE_STATE', - 'M105', 'M104', 'M109', - 'M112', 'M115', 'IGNORE', 'GET_POSITION', + 'M105', 'M112', 'M115', 'IGNORE', 'GET_POSITION', 'RESTART', 'FIRMWARE_RESTART', 'ECHO', 'STATUS', 'HELP'] # G-Code movement commands cmd_G1_aliases = ['G0'] @@ -613,7 +591,7 @@ class GCodeParser: speed = self.get_float('MOVE_SPEED', params, self.speed, above=0.) self.last_position[:3] = state['last_position'][:3] self.move_with_transform(self.last_position, speed) - # G-Code temperature commands + # G-Code miscellaneous commands cmd_M105_when_not_ready = True def cmd_M105(self, params): # Get Extruder Temperature @@ -622,13 +600,6 @@ class GCodeParser: self.ack(msg) else: self.respond(msg) - def cmd_M104(self, params): - # Set Extruder Temperature - self._set_temp(params) - def cmd_M109(self, params): - # Set Extruder Temperature and Wait - self._set_temp(params, wait=True) - # G-Code miscellaneous commands cmd_M112_when_not_ready = True def cmd_M112(self, params): # Emergency Stop |