diff options
Diffstat (limited to 'klippy/extruder.py')
| -rw-r--r-- | klippy/extruder.py | 25 |
1 files changed, 13 insertions, 12 deletions
diff --git a/klippy/extruder.py b/klippy/extruder.py index d6eff720..f86af765 100644 --- a/klippy/extruder.py +++ b/klippy/extruder.py @@ -50,8 +50,8 @@ class PrinterExtruder: if is_active: return self.activate_gcode return self.deactivate_gcode - def motor_off(self, move_time): - self.stepper.motor_enable(move_time, 0) + def motor_off(self, print_time): + self.stepper.motor_enable(print_time, 0) self.need_motor_enable = True def check_move(self, move): move.extrude_r = move.axes_d[3] / move.move_d @@ -131,9 +131,9 @@ class PrinterExtruder: return i move.extrude_max_corner_v = max_corner_v return flush_count - def move(self, move_time, move): + def move(self, print_time, move): if self.need_motor_enable: - self.stepper.motor_enable(move_time, 1) + self.stepper.motor_enable(print_time, 1) self.need_motor_enable = False axis_d = move.axes_d[3] axis_r = abs(axis_d) / move.move_d @@ -190,27 +190,28 @@ class PrinterExtruder: # Prepare for steps mcu_stepper = self.stepper.mcu_stepper - mcu_time = mcu_stepper.print_to_mcu_time(move_time) + move_time = print_time # Acceleration steps if accel_d: - mcu_stepper.step_const(mcu_time, start_pos, accel_d, start_v, accel) + mcu_stepper.step_const(move_time, start_pos, accel_d, start_v, accel) start_pos += accel_d - mcu_time += accel_t + move_time += accel_t # Cruising steps if cruise_d: - mcu_stepper.step_const(mcu_time, start_pos, cruise_d, cruise_v, 0.) + mcu_stepper.step_const(move_time, start_pos, cruise_d, cruise_v, 0.) start_pos += cruise_d - mcu_time += cruise_t + move_time += cruise_t # Deceleration steps if decel_d: - mcu_stepper.step_const(mcu_time, start_pos, decel_d, decel_v, -accel) + mcu_stepper.step_const( + move_time, start_pos, decel_d, decel_v, -accel) start_pos += decel_d - mcu_time += decel_t + move_time += decel_t # Retraction steps if retract_d: mcu_stepper.step_const( - mcu_time, start_pos, -retract_d, retract_v, accel) + move_time, start_pos, -retract_d, retract_v, accel) start_pos -= retract_d self.extrude_pos = start_pos |