diff options
Diffstat (limited to 'klippy/extras')
| -rw-r--r-- | klippy/extras/bed_mesh.py | 114 |
1 files changed, 112 insertions, 2 deletions
diff --git a/klippy/extras/bed_mesh.py b/klippy/extras/bed_mesh.py index 6c714304..9e30846f 100644 --- a/klippy/extras/bed_mesh.py +++ b/klippy/extras/bed_mesh.py @@ -1,6 +1,5 @@ # Mesh Bed Leveling # -# Copyright (C) 2018 Kevin O'Connor <kevin@koconnor.net> # Copyright (C) 2018-2019 Eric Callahan <arksine.code@gmail.com> # # This file may be distributed under the terms of the GNU GPLv3 license. @@ -291,6 +290,7 @@ class BedMeshCalibrate: self.orig_config = {'radius': None, 'origin': None} self.radius = self.origin = None self.mesh_min = self.mesh_max = (0., 0.) + self.adaptive_margin = config.getfloat('adaptive_margin', 0.0) self.zero_ref_pos = config.getfloatlist( "zero_reference_position", None, count=2 ) @@ -573,6 +573,113 @@ class BedMeshCalibrate: "interpolation. Configured Probe Count: %d, %d" % (self.mesh_config['x_count'], self.mesh_config['y_count'])) params['algo'] = 'lagrange' + def set_adaptive_mesh(self, gcmd): + if not gcmd.get_int('ADAPTIVE', 0): + return False + exclude_objects = self.printer.lookup_object("exclude_object", None) + if exclude_objects is None: + gcmd.respond_info("Exclude objects not enabled. Using full mesh...") + return False + objects = exclude_objects.get_status().get("objects", []) + if not objects: + return False + margin = gcmd.get_float('ADAPTIVE_MARGIN', self.adaptive_margin) + + # List all exclude_object points by axis and iterate over + # all polygon points, and pick the min and max or each axis + list_of_xs = [] + list_of_ys = [] + gcmd.respond_info("Found %s objects" % (len(objects))) + for obj in objects: + for point in obj["polygon"]: + list_of_xs.append(point[0]) + list_of_ys.append(point[1]) + + # Define bounds of adaptive mesh area + mesh_min = [min(list_of_xs), min(list_of_ys)] + mesh_max = [max(list_of_xs), max(list_of_ys)] + adjusted_mesh_min = [x - margin for x in mesh_min] + adjusted_mesh_max = [x + margin for x in mesh_max] + + # Force margin to respect original mesh bounds + adjusted_mesh_min[0] = max(adjusted_mesh_min[0], + self.orig_config["mesh_min"][0]) + adjusted_mesh_min[1] = max(adjusted_mesh_min[1], + self.orig_config["mesh_min"][1]) + adjusted_mesh_max[0] = min(adjusted_mesh_max[0], + self.orig_config["mesh_max"][0]) + adjusted_mesh_max[1] = min(adjusted_mesh_max[1], + self.orig_config["mesh_max"][1]) + + adjusted_mesh_size = (adjusted_mesh_max[0] - adjusted_mesh_min[0], + adjusted_mesh_max[1] - adjusted_mesh_min[1]) + + # Compute a ratio between the adapted and original sizes + ratio = (adjusted_mesh_size[0] / + (self.orig_config["mesh_max"][0] - + self.orig_config["mesh_min"][0]), + adjusted_mesh_size[1] / + (self.orig_config["mesh_max"][1] - + self.orig_config["mesh_min"][1])) + + gcmd.respond_info("Original mesh bounds: (%s,%s)" % + (self.orig_config["mesh_min"], + self.orig_config["mesh_max"])) + gcmd.respond_info("Original probe count: (%s,%s)" % + (self.mesh_config["x_count"], + self.mesh_config["y_count"])) + gcmd.respond_info("Adapted mesh bounds: (%s,%s)" % + (adjusted_mesh_min, adjusted_mesh_max)) + gcmd.respond_info("Ratio: (%s, %s)" % ratio) + + new_x_probe_count = int( + math.ceil(self.mesh_config["x_count"] * ratio[0])) + new_y_probe_count = int( + math.ceil(self.mesh_config["y_count"] * ratio[1])) + + # There is one case, where we may have to adjust the probe counts: + # axis0 < 4 and axis1 > 6 (see _verify_algorithm). + min_num_of_probes = 3 + if max(new_x_probe_count, new_y_probe_count) > 6 and \ + min(new_x_probe_count, new_y_probe_count) < 4: + min_num_of_probes = 4 + + new_x_probe_count = max(min_num_of_probes, new_x_probe_count) + new_y_probe_count = max(min_num_of_probes, new_y_probe_count) + + gcmd.respond_info("Adapted probe count: (%s,%s)" % + (new_x_probe_count, new_y_probe_count)) + + # If the adapted mesh size is too small, adjust it to something + # useful. + adjusted_mesh_size = (max(adjusted_mesh_size[0], new_x_probe_count), + max(adjusted_mesh_size[1], new_y_probe_count)) + + if self.radius is not None: + adapted_radius = math.sqrt((adjusted_mesh_size[0] ** 2) + + (adjusted_mesh_size[1] ** 2)) / 2 + adapted_origin = (adjusted_mesh_min[0] + + (adjusted_mesh_size[0] / 2), + adjusted_mesh_min[1] + + (adjusted_mesh_size[1] / 2)) + to_adapted_origin = math.sqrt(adapted_origin[0]**2 + + adapted_origin[1]**2) + # If the adapted mesh size is smaller than the default/full + # mesh, adjust the parameters. Otherwise, just do the full mesh. + if adapted_radius + to_adapted_origin < self.radius: + self.radius = adapted_radius + self.origin = adapted_origin + self.mesh_min = (-self.radius, -self.radius) + self.mesh_max = (self.radius, self.radius) + self.mesh_config["x_count"] = self.mesh_config["y_count"] = \ + max(new_x_probe_count, new_y_probe_count) + else: + self.mesh_min = adjusted_mesh_min + self.mesh_max = adjusted_mesh_max + self.mesh_config["x_count"] = new_x_probe_count + self.mesh_config["y_count"] = new_y_probe_count + self._profile_name = None + return True def update_config(self, gcmd): # reset default configuration self.radius = self.orig_config['radius'] @@ -616,6 +723,8 @@ class BedMeshCalibrate: self.mesh_config['algo'] = gcmd.get('ALGORITHM').strip().lower() need_cfg_update = True + need_cfg_update |= self.set_adaptive_mesh(gcmd) + if need_cfg_update: self._verify_algorithm(gcmd.error) self._generate_points(gcmd.error) @@ -781,7 +890,8 @@ class BedMeshCalibrate: z_mesh.set_zero_reference(*self.zero_ref_pos) self.bedmesh.set_mesh(z_mesh) self.gcode.respond_info("Mesh Bed Leveling Complete") - self.bedmesh.save_profile(self._profile_name) + if self._profile_name is not None: + self.bedmesh.save_profile(self._profile_name) def _dump_points(self, probed_pts, corrected_pts, offsets): # logs generated points with offset applied, points received # from the finalize callback, and the list of corrected points |