1 files changed, 46 insertions, 0 deletions
diff --git a/klippy/extras/samd_sercom.py b/klippy/extras/samd_sercom.py
new file mode 100644
index 00000000..2861cf6a
--- /dev/null
+++ b/klippy/extras/samd_sercom.py
@@ -0,0 +1,46 @@
+# SAMD Sercom configuration
+#
+# Copyright (C) 2019  Florian Heilmann <Florian.Heilmann@gmx.net>
+#
+# This file may be distributed under the terms of the GNU GPLv3 license.
+
+class SamdSERCOM:
+    def __init__(self, config):
+        self.printer = config.get_printer()
+        self.name = config.get_name().split()[1]
+        ppins = self.printer.lookup_object("pins")
+        try:
+            int(self.name)
+        except ValueError:
+            raise ppins.error("%s: SERCOM name must be an integer" % (
+                    config.get_name(),))
+
+        self.tx_pin = config.get("tx_pin")
+        self.rx_pin = config.get("rx_pin", None)
+        self.clk_pin = config.get("clk_pin")
+
+        tx_pin_params = ppins.lookup_pin(self.tx_pin)
+        self.mcu = tx_pin_params['chip']
+        self.mcu.add_config_cmd(
+            "set_sercom_pin sercom_id=%s pin_type=%d pin=%s" % (
+                self.name, 0, self.tx_pin))
+
+        clk_pin_params = ppins.lookup_pin(self.clk_pin)
+        if self.mcu is not clk_pin_params['chip']:
+           raise ppins.error("%s: SERCOM pins must be on same mcu" % (
+                    config.get_name(),))
+        self.mcu.add_config_cmd(
+            "set_sercom_pin sercom_id=%s pin_type=%d pin=%s" % (
+                self.name, 2, self.clk_pin))
+
+        if self.rx_pin:
+            rx_pin_params = ppins.lookup_pin(self.rx_pin)
+            if self.mcu is not rx_pin_params['chip']:
+                raise ppins.error("%s: SERCOM pins must be on same mcu" % (
+                    config.get_name(),))
+            self.mcu.add_config_cmd(
+                "set_sercom_pin sercom_id=%s pin_type=%d pin=%s" % (
+                    self.name, 1, self.rx_pin))
+
+def load_config_prefix(config):
+    return SamdSERCOM(config)