1 files changed, 2 insertions, 117 deletions

diff --git a/klippy/chelper/kin_cartesian.c b/klippy/chelper/kin_cartesian.c
index c9d01e0a..2b323d14 100644
--- a/klippy/chelper/kin_cartesian.c
+++ b/klippy/chelper/kin_cartesian.c
@@ -1,129 +1,14 @@
 // Cartesian kinematics stepper pulse time generation
 //
-// Copyright (C) 2016-2018  Kevin O'Connor <kevin@koconnor.net>
+// Copyright (C) 2018  Kevin O'Connor <kevin@koconnor.net>
 //
 // This file may be distributed under the terms of the GNU GPLv3 license.
 
-#include <math.h> // sqrt
 #include <stdlib.h> // malloc
 #include <string.h> // memset
-#include "compiler.h" // likely
+#include "compiler.h" // __visible
 #include "itersolve.h" // move_get_coord
 #include "pyhelper.h" // errorf
-#include "stepcompress.h" // queue_append
-
-
-/****************************************************************
- * Direct step generation
- ****************************************************************/
-
-// Common suffixes: _sd is step distance (a unit length the same
-// distance the stepper moves on each step), _sv is step velocity (in
-// units of step distance per time), _sd2 is step distance squared, _r
-// is ratio (scalar usually between 0.0 and 1.0).  Times are in
-// seconds and acceleration is in units of step distance per second
-// squared.
-
-// Wrapper around sqrt() to handle small negative numbers
-static double
-_safe_sqrt(double v)
-{
-    // Due to floating point truncation, it's possible to get a small
-    // negative number - treat it as zero.
-    if (v < -0.001)
-        errorf("safe_sqrt of %.9f", v);
-    return 0.;
-}
-inline double safe_sqrt(double v) {
-    return likely(v >= 0.) ? sqrt(v) : _safe_sqrt(v);
-}
-
-// Schedule a step event at the specified step_clock time
-int32_t __visible
-stepcompress_push(struct stepcompress *sc, double print_time, int32_t sdir)
-{
-    int ret = set_next_step_dir(sc, !!sdir);
-    if (ret)
-        return ret;
-    struct queue_append qa = queue_append_start(sc, print_time, 0.5);
-    ret = queue_append(&qa, 0.);
-    if (ret)
-        return ret;
-    queue_append_finish(qa);
-    return sdir ? 1 : -1;
-}
-
-// Schedule 'steps' number of steps at constant acceleration. If
-// acceleration is zero (ie, constant velocity) it uses the formula:
-//  step_time = print_time + step_num/start_sv
-// Otherwise it uses the formula:
-//  step_time = (print_time + sqrt(2*step_num/accel + (start_sv/accel)**2)
-//               - start_sv/accel)
-int32_t __visible
-stepcompress_push_const(
-    struct stepcompress *sc, double print_time
-    , double step_offset, double steps, double start_sv, double accel)
-{
-    // Calculate number of steps to take
-    int sdir = 1;
-    if (steps < 0) {
-        sdir = 0;
-        steps = -steps;
-        step_offset = -step_offset;
-    }
-    int count = steps + .5 - step_offset;
-    if (count <= 0 || count > 10000000) {
-        if (count && steps) {
-            errorf("push_const invalid count %d %f %f %f %f %f"
-                   , stepcompress_get_oid(sc), print_time, step_offset, steps
-                   , start_sv, accel);
-            return ERROR_RET;
-        }
-        return 0;
-    }
-    int ret = set_next_step_dir(sc, sdir);
-    if (ret)
-        return ret;
-    int res = sdir ? count : -count;
-
-    // Calculate each step time
-    if (!accel) {
-        // Move at constant velocity (zero acceleration)
-        struct queue_append qa = queue_append_start(sc, print_time, .5);
-        double inv_cruise_sv = stepcompress_get_mcu_freq(sc) / start_sv;
-        double pos = (step_offset + .5) * inv_cruise_sv;
-        while (count--) {
-            ret = queue_append(&qa, pos);
-            if (ret)
-                return ret;
-            pos += inv_cruise_sv;
-        }
-        queue_append_finish(qa);
-    } else {
-        // Move with constant acceleration
-        double inv_accel = 1. / accel;
-        double mcu_freq = stepcompress_get_mcu_freq(sc);
-        double accel_time = start_sv * inv_accel * mcu_freq;
-        struct queue_append qa = queue_append_start(
-            sc, print_time, 0.5 - accel_time);
-        double accel_multiplier = 2. * inv_accel * mcu_freq * mcu_freq;
-        double pos = (step_offset + .5)*accel_multiplier + accel_time*accel_time;
-        while (count--) {
-            double v = safe_sqrt(pos);
-            int ret = queue_append(&qa, accel_multiplier >= 0. ? v : -v);
-            if (ret)
-                return ret;
-            pos += accel_multiplier;
-        }
-        queue_append_finish(qa);
-    }
-    return res;
-}
-
-
-/****************************************************************
- * Iterative solver
- ****************************************************************/
 
 static double
 cart_stepper_x_calc_position(struct stepper_kinematics *sk, struct move *m