diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/Manual_Level.md | 7 |
1 files changed, 7 insertions, 0 deletions
diff --git a/docs/Manual_Level.md b/docs/Manual_Level.md index 3ae75447..a50e6daf 100644 --- a/docs/Manual_Level.md +++ b/docs/Manual_Level.md @@ -191,3 +191,10 @@ it has an X or Y offset) then note that adjusting the bed tilt will invalidate any previous probe calibration that was performed with a tilted bed. Be sure to run [probe calibration](Probe_Calibrate.md) after the bed screws have been adjusted. + +The `MAX_DEVIATION` parameter is useful when a saved bed mesh is used, +to ensure that the bed level has not drifted too far from where it was when +the mesh was created. For example, `SCREWS_TILT_CALCULATE MAX_DEVIATION=0.01` +can be added to the custom start gcode of the slicer before the mesh is loaded. +It will abort the print if the configured limit is exceeded (0.01mm in this +example), giving the user a chance to adjust the screws and restart the print. |