diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/G-Codes.md | 15 |
1 files changed, 15 insertions, 0 deletions
diff --git a/docs/G-Codes.md b/docs/G-Codes.md index ee1fdcf5..d44017de 100644 --- a/docs/G-Codes.md +++ b/docs/G-Codes.md @@ -1067,6 +1067,21 @@ CYCLE_TIME parameter is not stored between SET_PIN commands (any SET_PIN command without an explicit CYCLE_TIME parameter will use the `cycle_time` specified in the pwm_cycle_time config section). +### [quad_gantry_level] + +The following commands are available when the +[quad_gantry_level config section](Config_Reference.md#quad_gantry_level) +is enabled. + +#### QUAD_GANTRY_LEVEL +`QUAD_GANTRY_LEVEL [RETRIES=<value>] [RETRY_TOLERANCE=<value>] +[HORIZONTAL_MOVE_Z=<value>] [<probe_parameter>=<value>]`: This command +will probe the points specified in the config and then make +independent adjustments to each Z stepper to compensate for tilt. See +the PROBE command for details on the optional probe parameters. The +optional `RETRIES`, `RETRY_TOLERANCE`, and `HORIZONTAL_MOVE_Z` values +override those options specified in the config file. + ### [query_adc] The query_adc module is automatically loaded. |