diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/Config_Changes.md | 4 | ||||
| -rw-r--r-- | docs/Config_Reference.md | 4 |
2 files changed, 6 insertions, 2 deletions
diff --git a/docs/Config_Changes.md b/docs/Config_Changes.md index 13fefdad..a6558f2e 100644 --- a/docs/Config_Changes.md +++ b/docs/Config_Changes.md @@ -8,6 +8,10 @@ All dates in this document are approximate. ## Changes +20210903: The default [`smooth_time`](Config_Reference.md#extruder) +for heaters has changed to 1 second (from 2 seconds). For most +printers this will result in more stable temperature control. + 20210830: The default adxl345 name is now "adxl345". The default CHIP parameter for the `ACCELEROMETER_MEASURE` and `ACCELEROMETER_QUERY` is now also "adxl345". diff --git a/docs/Config_Reference.md b/docs/Config_Reference.md index a3d9842a..1ae5a5c6 100644 --- a/docs/Config_Reference.md +++ b/docs/Config_Reference.md @@ -707,10 +707,10 @@ sensor_pin: # The resistance (in ohms) of the pullup attached to the thermistor. # This parameter is only valid when the sensor is a thermistor. The # default is 4700 ohms. -#smooth_time: 2.0 +#smooth_time: 1.0 # A time value (in seconds) over which temperature measurements will # be smoothed to reduce the impact of measurement noise. The default -# is 2 seconds. +# is 1 seconds. control: # Control algorithm (either pid or watermark). This parameter must # be provided. |