diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/Config_Reference.md | 18 |
1 files changed, 15 insertions, 3 deletions
diff --git a/docs/Config_Reference.md b/docs/Config_Reference.md index 48ba7d32..28d22945 100644 --- a/docs/Config_Reference.md +++ b/docs/Config_Reference.md @@ -3080,9 +3080,10 @@ lcd_type: # The type of LCD chip in use. This may be "hd44780" (which is used # in "RepRapDiscount 2004 Smart Controller" type displays), "st7920" # (which is used in "RepRapDiscount 12864 Full Graphic Smart -# Controller" type displays), "uc1701" (which is used in "MKS Mini -# 12864" type displays), "ssd1306", or "sh1106". This parameter must -# be provided. +# Controller" type displays), "emulated_st7920" (which emulate a ST7920 +# display but won't work properly with the "st7920" display driver), +# "uc1701" (which is used in "MKS Mini 12864" type displays), +# "ssd1306", or "sh1106". This parameter must be provided. #hd44780_protocol_init: True # Perform 8-bit/4-bit protocol initialization on an hd44780 display. # This is necessary on real hd44780 devices. However, one may @@ -3105,6 +3106,17 @@ lcd_type: #sid_pin: # The pins connected to an st7920 type lcd. These parameters must be # provided when using an st7920 display. +#en_pin: +#spi_speed: +#spi_software_sclk_pin: +#spi_software_mosi_pin: +#spi_software_miso_pin: +# The pins connected to an emulated_st7920 type lcd. The en_pin corresponds +# to the cs_pin of the st7920 type lcd, spi_software_sclk_pin corresponds +# to sclk_pin and spi_software_mosi_pin corresponds to sid_pin. The +# spi_software_miso_pin needs to be set to an unused pin of the printer +# mainboard as the st7920 as no MISO pin but the software spi implementation +# requires this pin to be configured. The default spi_speed is 1MHz. #cs_pin: #a0_pin: #rst_pin: |