diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/Config_Reference.md | 19 | ||||
| -rw-r--r-- | docs/Status_Reference.md | 3 |
2 files changed, 21 insertions, 1 deletions
diff --git a/docs/Config_Reference.md b/docs/Config_Reference.md index 403dfdfc..71cdfed8 100644 --- a/docs/Config_Reference.md +++ b/docs/Config_Reference.md @@ -2575,6 +2575,25 @@ sensor_type: # Interval in seconds between readings. Default is 30 ``` +### SHT3X sensor + +SHT3X family two wire interface (I2C) environmental sensor. These sensors +have a range of -55~125 C, so are usable for e.g. chamber temperature +monitoring. They can also function as simple fan/heater controllers. + +``` +sensor_type: SHT3X +#i2c_address: +# Default is 68 (0x44). +#i2c_mcu: +#i2c_bus: +#i2c_software_scl_pin: +#i2c_software_sda_pin: +#i2c_speed: +# See the "common I2C settings" section for a description of the +# above parameters. +``` + ### LM75 temperature sensor LM75/LM75A two wire (I2C) connected temperature sensors. These sensors diff --git a/docs/Status_Reference.md b/docs/Status_Reference.md index 0e72a12b..66d840d1 100644 --- a/docs/Status_Reference.md +++ b/docs/Status_Reference.md @@ -445,6 +445,7 @@ The following information is available in [bme280 config_section_name](Config_Reference.md#bmp280bme280bme680-temperature-sensor), [htu21d config_section_name](Config_Reference.md#htu21d-sensor), +[sht3x config_section_name](Config_Reference.md#sht31-sensor), [lm75 config_section_name](Config_Reference.md#lm75-temperature-sensor), [temperature_host config_section_name](Config_Reference.md#host-temperature-sensor) and @@ -452,7 +453,7 @@ and objects: - `temperature`: The last read temperature from the sensor. - `humidity`, `pressure`, `gas`: The last read values from the sensor - (only on bme280, htu21d, and lm75 sensors). + (only on bme280, htu21d, sht3x and lm75 sensors). ## temperature_fan |