diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/Config_Reference.md | 18 | ||||
| -rw-r--r-- | docs/Status_Reference.md | 3 |
2 files changed, 20 insertions, 1 deletions
diff --git a/docs/Config_Reference.md b/docs/Config_Reference.md index 4e3a9dde..d0b617a3 100644 --- a/docs/Config_Reference.md +++ b/docs/Config_Reference.md @@ -2583,6 +2583,24 @@ serial_no: # The micro-controller to read from. Must be the host_mcu ``` +### Combined temperature sensor + +Combined temperature sensor is a virtual temperature sensor based on several other sensors. This sensor can be used with extruders, heater_generic and heater beds. + +``` +sensor_type: temperature_combined +#sensor_list: +# Must be provided. List of sensors to combine to new "virtual" +# sensor. +# E.g. 'temperature_sensor sensor1,extruder,heater_bed' +#combination_method: +# Must be provided. Combination method used for the sensor. +# Available options are 'max', 'min', 'mean'. +#maximum_deviation: +# Must be provided. Maximum permissible deviation between the sensors +# to combine (e.g. 5 degrees). To disable it, use a large value (e.g. 999.9) +``` + ## Fans ### [fan] diff --git a/docs/Status_Reference.md b/docs/Status_Reference.md index dc32f02a..036c7dec 100644 --- a/docs/Status_Reference.md +++ b/docs/Status_Reference.md @@ -427,8 +427,9 @@ The following information is available in [bme280 config_section_name](Config_Reference.md#bmp280bme280bme680-temperature-sensor), [htu21d config_section_name](Config_Reference.md#htu21d-sensor), [lm75 config_section_name](Config_Reference.md#lm75-temperature-sensor), -and [temperature_host config_section_name](Config_Reference.md#host-temperature-sensor) +and +[temperature_combined config_section_name](Config_Reference.md#combined-temperature-sensor) objects: - `temperature`: The last read temperature from the sensor. - `humidity`, `pressure`, `gas`: The last read values from the sensor |