diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/G-Codes.md | 5 |
1 files changed, 5 insertions, 0 deletions
diff --git a/docs/G-Codes.md b/docs/G-Codes.md index 286dce36..48ece06d 100644 --- a/docs/G-Codes.md +++ b/docs/G-Codes.md @@ -202,6 +202,11 @@ The following standard commands are supported: adjustment will only be made every BAND millimeters of z height - in that case the formula used is `value = start + factor * ((floor(z_height / band) + .5) * band)`. +- `SET_DISPLAY_GROUP DISPLAY=<display> GROUP=<group>`: Set the active + display group of the display. This allows to define multiple display + data groups in the config, e.g.`[display_data <group> <elementname>]` + and switch between them using this extended gcode command. use + `DISPLAY=display` to change the display group of the default display. - `SET_IDLE_TIMEOUT [TIMEOUT=<timeout>]`: Allows the user to set the idle timeout (in seconds). - `RESTART`: This will cause the host software to reload its config |