diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/Config_Changes.md | 4 | ||||
| -rw-r--r-- | docs/Config_Reference.md | 7 |
2 files changed, 6 insertions, 5 deletions
diff --git a/docs/Config_Changes.md b/docs/Config_Changes.md index 2ceb868d..bd00e3d7 100644 --- a/docs/Config_Changes.md +++ b/docs/Config_Changes.md @@ -8,6 +8,10 @@ All dates in this document are approximate. ## Changes +20240123: The output_pin `static_value` parameter is deprecated. +Replace with `value` and `shutdown_value` parameters. The option will +be removed in the near future. + 20231216: The `[hall_filament_width_sensor]` is changed to trigger filament runout when the thickness of the filament exceeds `max_diameter`. The maximum diameter defaults to `default_nominal_filament_diameter + max_difference`. See diff --git a/docs/Config_Reference.md b/docs/Config_Reference.md index 4b53ef26..a6964e5b 100644 --- a/docs/Config_Reference.md +++ b/docs/Config_Reference.md @@ -3096,11 +3096,6 @@ pin: # If this is true, the value fields should be between 0 and 1; if it # is false the value fields should be either 0 or 1. The default is # False. -#static_value: -# If this is set, then the pin is assigned to this value at startup -# and the pin can not be changed during runtime. A static pin uses -# slightly less ram in the micro-controller. The default is to use -# runtime configuration of pins. #value: # The value to initially set the pin to during MCU configuration. # The default is 0 (for low voltage). @@ -3133,6 +3128,8 @@ pin: # then the 'value' parameter can be specified using the desired # amperage for the stepper. The default is to not scale the 'value' # parameter. +#static_value: +# This option is deprecated and should no longer be specified. ``` ### [pwm_tool] |