diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/G-Codes.md | 17 |
1 files changed, 10 insertions, 7 deletions
diff --git a/docs/G-Codes.md b/docs/G-Codes.md index 4ab3ffc7..a82f1cc9 100644 --- a/docs/G-Codes.md +++ b/docs/G-Codes.md @@ -222,13 +222,16 @@ is enabled: The following command is available when "neopixel" or "dotstar" config sections are enabled: -- `SET_LED LED=<config_name> INDEX=<index> RED=<value> GREEN=<value> - BLUE=<value>`: This sets the LED output. Each color <value> must be - between 0.0 and 1.0. If multiple LED chips are daisy-chained then - one may specify INDEX to alter the color of just the given chip (1 - for the first chip, 2 for the second, etc.). If INDEX is not - provided then all LEDs in the daisy-chain will be set to the - provided color. +- `SET_LED LED=<config_name> RED=<value> GREEN=<value> BLUE=<value> + [INDEX=<index>] [TRANSMIT=0]`: This sets the LED output. Each color + <value> must be between 0.0 and 1.0. If multiple LED chips are + daisy-chained then one may specify INDEX to alter the color of just + the given chip (1 for the first chip, 2 for the second, etc.). If + INDEX is not provided then all LEDs in the daisy-chain will be set + to the provided color. If TRANSMIT=0 is specified then the color + change will only be made on the next SET_LED command that does not + specify TRANSMIT=0; this may be useful in combination with the INDEX + parameter to batch multiple updates in a daisy-chain. ## Servo Commands |