diff options
Diffstat (limited to 'docs/beaglebone.md')
| -rw-r--r-- | docs/beaglebone.md | 11 |
1 files changed, 10 insertions, 1 deletions
diff --git a/docs/beaglebone.md b/docs/beaglebone.md index 5d773287..93870c3f 100644 --- a/docs/beaglebone.md +++ b/docs/beaglebone.md @@ -54,7 +54,6 @@ sudo systemctl start octoprint Make sure the octoprint web server is accessible - it should be at: [http://beaglebone:5000/](http://beaglebone:5000/) - Building the micro-controller code ================================== @@ -92,3 +91,13 @@ Remaining configuration Complete the installation by configuring Klipper and Octoprint following the instructions in [the main installation document](Installation.md#configuring-klipper). + +Printing on the Beaglebone +========================== + +Unfortunately, the Beaglebone processor can sometimes struggle to run +OctoPrint well. Print stalls have been known to occur on complex +prints (the printer may move faster than OctoPrint can send movement +commands). If this occurs, consider using the "virtual_sdcard" feature +(see [config/example-extras.cfg](../config/example-extras.cfg) for +details) to print directly from Klipper. |