diff options
Diffstat (limited to 'docs/Status_Reference.md')
| -rw-r--r-- | docs/Status_Reference.md | 42 |
1 files changed, 23 insertions, 19 deletions
diff --git a/docs/Status_Reference.md b/docs/Status_Reference.md index c09ad0fb..dcb957f3 100644 --- a/docs/Status_Reference.md +++ b/docs/Status_Reference.md @@ -38,17 +38,19 @@ The following information is available in the `display_status` object # fan The following information is available in -[fan](Config_Reference.md#fan), [heater_fan -some_name](Config_Reference.md#heater_fan) and [controller_fan -some_name](Config_Reference.md#controller_fan) objects: +[fan](Config_Reference.md#fan), +[heater_fan some_name](Config_Reference.md#heater_fan) and +[controller_fan some_name](Config_Reference.md#controller_fan) +objects: - `speed`: The fan speed as a float between 0.0 and 1.0. - `rpm`: The measured fan speed in rotations per minute if the fan has a tachometer_pin defined. # filament_switch_sensor -The following information is available in [filament_switch_sensor -some_name](Config_Reference.md#filament_switch_sensor) objects: +The following information is available in +[filament_switch_sensor some_name](Config_Reference.md#filament_switch_sensor) +objects: - `enabled`: Returns True if the switch sensor is currently enabled. - `filament_detected`: Returns True if the sensor is in a triggered state. @@ -64,10 +66,10 @@ The following information is available in the # gcode_macro -The following information is available in [gcode_macro -some_name](Config_Reference.md#gcode_macro) objects: -- `<variable>`: The current value of a [gcode_macro - variable](Command_Templates.md#variables). +The following information is available in +[gcode_macro some_name](Config_Reference.md#gcode_macro) objects: +- `<variable>`: The current value of a + [gcode_macro variable](Command_Templates.md#variables). # gcode_move @@ -146,8 +148,8 @@ is always available): # mcu The following information is available in -[mcu](Config_Reference.md#mcu) and [mcu -some_name](Config_Reference.md#mcu-my_extra_mcu) objects: +[mcu](Config_Reference.md#mcu) and +[mcu some_name](Config_Reference.md#mcu-my_extra_mcu) objects: - `mcu_version`: The Klipper code version reported by the micro-controller. - `mcu_build_versions`: Information on the build tools used to @@ -161,8 +163,8 @@ some_name](Config_Reference.md#mcu-my_extra_mcu) objects: # output_pin -The following information is available in [output_pin -some_name](Config_Reference.md#output_pin) objects: +The following information is available in +[output_pin some_name](Config_Reference.md#output_pin) objects: - `value`: The "value" of the pin, as set by a `SET_PIN` command. # palette2 @@ -218,8 +220,8 @@ The following information is available in the `query_endstops` object # servo -The following information is available in [servo -some_name](Config_Reference.md#servo) objects: +The following information is available in +[servo some_name](Config_Reference.md#servo) objects: - `printer["servo <config_name>"].value`: The last setting of the PWM pin (a value between 0.0 and 1.0) associated with the servo. @@ -245,15 +247,17 @@ objects: # temperature_fan -The following information is available in [temperature_fan -some_name](Config_Reference.md#temperature_fan) objects: +The following information is available in +[temperature_fan some_name](Config_Reference.md#temperature_fan) +objects: - `temperature`: The last read temperature from the sensor. - `target`: The target temperature for the fan. # temperature_sensor -The following information is available in [temperature_sensor -some_name](Config_Reference.md#temperature_sensor) objects: +The following information is available in +[temperature_sensor some_name](Config_Reference.md#temperature_sensor) +objects: - `temperature`: The last read temperature from the sensor. - `measured_min_temp`, `measured_max_temp`: The lowest and highest temperature seen by the sensor since the Klipper host software was |