diff options
Diffstat (limited to 'docs/Probe_Calibrate.md')
| -rw-r--r-- | docs/Probe_Calibrate.md | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/docs/Probe_Calibrate.md b/docs/Probe_Calibrate.md index 9bede889..ed3964e6 100644 --- a/docs/Probe_Calibrate.md +++ b/docs/Probe_Calibrate.md @@ -129,12 +129,12 @@ typical bed leveling procedures. It may be possible to tune the probe speed and/or probe start height to improve the repeatability of the probe. The `PROBE_ACCURACY` command allows one to run tests with different parameters to see their impact - see the -[G-Codes document](G-Codes.md) for further details. If the probe -generally obtains repeatable results but has an occasional outlier, -then it may be possible to account for that by using multiple samples -on each probe - read the description of the probe `samples` config -parameters in the [config reference](Config_Reference.md#probe) for -more details. +[G-Codes document](G-Codes.md#probe_accuracy) for further details. If +the probe generally obtains repeatable results but has an occasional +outlier, then it may be possible to account for that by using multiple +samples on each probe - read the description of the probe `samples` +config parameters in the [config reference](Config_Reference.md#probe) +for more details. If new probe speed, samples count, or other settings are needed, then update the printer.cfg file and issue a `RESTART` command. If so, it |