diff options
Diffstat (limited to 'docs/Pressure_Advance.md')
| -rw-r--r-- | docs/Pressure_Advance.md | 3 |
1 files changed, 2 insertions, 1 deletions
diff --git a/docs/Pressure_Advance.md b/docs/Pressure_Advance.md index d16364fb..26dc87ac 100644 --- a/docs/Pressure_Advance.md +++ b/docs/Pressure_Advance.md @@ -20,7 +20,8 @@ running the test. Use a slicer to generate g-code for the large hollow square found in [docs/prints/square_tower.stl](prints/square_tower.stl). Use a high speed (eg, 100mm/s), zero infill, and a coarse layer height (the layer -height should be around 75% of the nozzle diameter). +height should be around 75% of the nozzle diameter). Make sure any +"dynamic acceleration control" is disabled in the slicer. Prepare for the test by issuing the following G-Code command: ``` |