diff options
Diffstat (limited to 'docs/HallFilamentWidthSensor.md')
| -rw-r--r-- | docs/HallFilamentWidthSensor.md | 12 |
1 files changed, 12 insertions, 0 deletions
diff --git a/docs/HallFilamentWidthSensor.md b/docs/HallFilamentWidthSensor.md index 5867662d..efb62128 100644 --- a/docs/HallFilamentWidthSensor.md +++ b/docs/HallFilamentWidthSensor.md @@ -48,6 +48,10 @@ Sensor generates two analog output based on calculated filament width. Sum of ou # measurement_interval:10 # Sensor readings done with 10 mm intervals by default. If necessary you are free to change this setting + #logging: False + # Out diameter to terminal and klipper.log + # can be turn on|of by command + #Virtual filament_switch_sensor suppurt. Create sensor named hall_filament_width_sensor. # #min_diameter:1.0 @@ -75,6 +79,10 @@ Sensor generates two analog output based on calculated filament width. Sum of ou **QUERY_RAW_FILAMENT_WIDTH** Return the current ADC channel values and RAW sensor value for calibration points +**ENABLE_FILAMENT_WIDTH_LOG** - Turn on diameter logging + +**DISABLE_FILAMENT_WIDTH_LOG** - Turn off diameter logging + ## Menu variables **hall_filament_width_sensor.Diameter** current measured filament width in mm @@ -117,3 +125,7 @@ Save raw values in config ## How to enable sensor After power on by default sensor disabled. Enable sensor in start g-code by command **ENABLE_FILAMENT_WIDTH_SENSOR** or change enable parameter in config + +## Logging +After power on by default diameter Logging disabled. +Data to log added on every measurement interval (10 mm by default) |