diff options
Diffstat (limited to 'docs/G-Codes.md')
| -rw-r--r-- | docs/G-Codes.md | 17 |
1 files changed, 17 insertions, 0 deletions
diff --git a/docs/G-Codes.md b/docs/G-Codes.md index dbfd0b85..bef64dc4 100644 --- a/docs/G-Codes.md +++ b/docs/G-Codes.md @@ -714,6 +714,23 @@ timeout. If careful timing is not needed, the optional SYNC=0 parameter can be specified to apply the changes without resetting the idle timeout. +#### SET_LED_TEMPLATE +`SET_LED_TEMPLATE LED=<led_name> TEMPLATE=<template_name> +[INDEX=<index>]`: Assign a +[display_template](Config_Reference.md#display_template) to a given +[LED](Config_Reference.md#leds). For example, if one defined a +`[display_template my_led_template]` config section then one could +assign `TEMPLATE=my_led_template` here. The display_template should +produce a comma separated string containing four floating point +numbers corresponding to red, green, blue, and white color settings. +The template will be continuously evaluated and the LED will be +automatically set to the resulting colors. If INDEX is not specified +then all chips in the LED's daisy-chain will be set to the template, +otherwise only the chip with the given index will be updated. If +TEMPLATE is an empty string then this command will clear any previous +template assigned to the LED (one can then use `SET_LED` commands to +manage the LED's color settings). + ### [output_pin] The following command is available when an |