diff options
Diffstat (limited to 'docs/FAQ.md')
| -rw-r--r-- | docs/FAQ.md | 16 |
1 files changed, 11 insertions, 5 deletions
diff --git a/docs/FAQ.md b/docs/FAQ.md index 3b0768a2..42485101 100644 --- a/docs/FAQ.md +++ b/docs/FAQ.md @@ -97,11 +97,17 @@ baud rate to 250000 when using Klipper. ### Can I run Klipper on something other than a Raspberry Pi 3? The recommended hardware is a Raspberry Pi 2 or a Raspberry -Pi 3. Klipper will run on a Raspberry Pi 1 and on the Raspberry Pi -Zero, but these boards don't have enough processing power to run -OctoPrint well. It's not uncommon for print stalls to occur on these -slower machines (the printer may move faster than OctoPrint can send -movement commands). +Pi 3. + +Klipper will run on a Raspberry Pi 1 and on the Raspberry Pi Zero, but +these boards don't have enough processing power to run OctoPrint +well. It's not uncommon for print stalls to occur on these slower +machines (the printer may move faster than OctoPrint can send movement +commands) when printing directly from OctoPrint. If you wish to run on +one one of these slower boards anyway, consider using the +"virtual_sdcard" feature (see +[config/example-extras.cfg](../config/example-extras.cfg) for details) +when printing. For running on the Beaglebone, see the [Beaglebone specific installation instructions](beaglebone.md). |