diff options
Diffstat (limited to 'docs/Config_Reference.md')
| -rw-r--r-- | docs/Config_Reference.md | 20 |
1 files changed, 12 insertions, 8 deletions
diff --git a/docs/Config_Reference.md b/docs/Config_Reference.md index 51a8acb2..869c9c94 100644 --- a/docs/Config_Reference.md +++ b/docs/Config_Reference.md @@ -160,7 +160,9 @@ max_z_accel: See [example-delta.cfg](https://github.com/KevinOConnor/klipper/tree/master/config/example-delta.cfg) -for an example linear delta kinematics config file. +for an example linear delta kinematics config file. See the +[delta calibrate guide](Delta_Calibrate.md) for information on +calibration. Only parameters specific to linear delta printers are described here - see [common kinematic settings](#common-kinematic-settings) for @@ -522,9 +524,10 @@ serial: ## [extruder] -The extruder section is used to describe both the stepper -controlling the printer extruder and the heater parameters for the -nozzle. +The extruder section is used to describe both the stepper controlling +the printer extruder and the heater parameters for the nozzle. See the +[pressure advance guide](Pressure_Advance.md) for information on +tuning pressure advance. ``` [extruder] @@ -1463,10 +1466,11 @@ main printer config file. Wildcards may also be used (eg, Z height probe. One may define this section to enable Z height probing hardware. When this section is enabled, PROBE and QUERY_PROBE extended -[g-code commands](G-Codes.md#probe) become available. The probe -section also creates a virtual "probe:z_virtual_endstop" pin. One may -set the stepper_z endstop_pin to this virtual pin on cartesian style -printers that use the probe in place of a z endstop. If using +[g-code commands](G-Codes.md#probe) become available. Also, see the +[probe calibrate guide](Probe_Calibrate.md). The probe section also +creates a virtual "probe:z_virtual_endstop" pin. One may set the +stepper_z endstop_pin to this virtual pin on cartesian style printers +that use the probe in place of a z endstop. If using "probe:z_virtual_endstop" then do not define a position_endstop in the stepper_z config section. |