diff options
Diffstat (limited to 'docs/Config_Reference.md')
| -rw-r--r-- | docs/Config_Reference.md | 28 |
1 files changed, 28 insertions, 0 deletions
diff --git a/docs/Config_Reference.md b/docs/Config_Reference.md index c1c09cb7..b27da60b 100644 --- a/docs/Config_Reference.md +++ b/docs/Config_Reference.md @@ -3461,6 +3461,34 @@ information. # provided. ``` +## [filament_motion_sensor] + +Filament Motion Sensor. Support for filament insert and runout +detection using an encoder that toggles the output pin during filament +movement through the sensor. + +See the [command reference](G-Codes.md#filament-sensor) for more +information. + +``` +[filament_motion_sensor my_sensor] +detection_length: 7.0 +# The minimum length of filament pulled through the sensor to trigger +# a state change on the switch_pin +# Default is 7 mm. +extruder: +# The name of the extruder section this sensor is associated with. +# This parameter must be provided. +switch_pin: +#pause_on_runout: +#runout_gcode: +#insert_gcode: +#event_delay: +#pause_delay: +# See the "filament_switch_sensor" section for a description of the +# above parameters. +``` + ## [tsl1401cl_filament_width_sensor] TSLl401CL Based Filament Width Sensor. See the |