diff options
Diffstat (limited to 'docs/Config_Reference.md')
| -rw-r--r-- | docs/Config_Reference.md | 15 |
1 files changed, 9 insertions, 6 deletions
diff --git a/docs/Config_Reference.md b/docs/Config_Reference.md index 36302664..75a9de52 100644 --- a/docs/Config_Reference.md +++ b/docs/Config_Reference.md @@ -2773,8 +2773,9 @@ run_current: # during stepper movement. This parameter must be provided. #hold_current: # The amount of current (in amps RMS) to configure the driver to use -# when the stepper is not moving. The default is to not reduce the -# current. +# when the stepper is not moving. Setting a hold_current is not +# recommended (see TMC_Drivers.md for details). The default is to +# not reduce the current. #sense_resistor: 0.110 # The resistance (in ohms) of the motor sense resistor. The default # is 0.110 ohms. @@ -2839,8 +2840,9 @@ run_current: # during stepper movement. This parameter must be provided. #hold_current: # The amount of current (in amps RMS) to configure the driver to use -# when the stepper is not moving. The default is to use the same -# value as run_current. +# when the stepper is not moving. Setting a hold_current is not +# recommended (see TMC_Drivers.md for details). The default is to +# not reduce the current. #sense_resistor: 0.110 # The resistance (in ohms) of the motor sense resistor. The default # is 0.110 ohms. @@ -3022,8 +3024,9 @@ run_current: # during stepper movement. This parameter must be provided. #hold_current: # The amount of current (in amps RMS) to configure the driver to use -# when the stepper is not moving. The default is to use the same -# value as run_current. +# when the stepper is not moving. Setting a hold_current is not +# recommended (see TMC_Drivers.md for details). The default is to +# not reduce the current. #sense_resistor: 0.075 # The resistance (in ohms) of the motor sense resistor. The default # is 0.075 ohms. |