diff options
Diffstat (limited to 'docs/Config_Reference.md')
| -rw-r--r-- | docs/Config_Reference.md | 13 |
1 files changed, 7 insertions, 6 deletions
diff --git a/docs/Config_Reference.md b/docs/Config_Reference.md index 7017df32..6d36eba9 100644 --- a/docs/Config_Reference.md +++ b/docs/Config_Reference.md @@ -1914,6 +1914,9 @@ section). ## Common thermistors +Common thermistors. The following parameters are available in heater +sections that use one of these sensors. + ``` sensor_type: # One of "EPCOS 100K B57560G104F", "ATC Semitec 104GT-2", @@ -1921,17 +1924,15 @@ sensor_type: # "NTC 100K MGB18-104F39050L32", "SliceEngineering 450", or # "TDK NTCG104LH104JT1" sensor_pin: -# Analog input pin connected to the sensor. This parameter must be -# provided. +# Analog input pin connected to the thermistor. This parameter must +# be provided. #pullup_resistor: 4700 # The resistance (in ohms) of the pullup attached to the thermistor. -# This parameter is only valid when the sensor is a thermistor. The -# default is 4700 ohms. +# The default is 4700 ohms. #inline_resistor: 0 # The resistance (in ohms) of an extra (not heat varying) resistor # that is placed inline with the thermistor. It is rare to set this. -# This parameter is only valid when the sensor is a thermistor. The -# default is 0 ohms. +# The default is 0 ohms. ``` ## Common temperature amplifiers |