diff options
Diffstat (limited to 'config')
| -rw-r--r-- | config/avrsim.cfg | 1 | ||||
| -rw-r--r-- | config/example-delta.cfg | 1 | ||||
| -rw-r--r-- | config/example.cfg | 7 | ||||
| -rw-r--r-- | config/makergear-m2-2012.cfg | 1 |
4 files changed, 4 insertions, 6 deletions
diff --git a/config/avrsim.cfg b/config/avrsim.cfg index 83afde34..6a50ae80 100644 --- a/config/avrsim.cfg +++ b/config/avrsim.cfg @@ -65,7 +65,6 @@ max_temp: 110 [fan] pin: ar14 -hard_pwm: 1 [mcu] serial: /tmp/pseudoserial diff --git a/config/example-delta.cfg b/config/example-delta.cfg index 1eb96b3c..90f8c8b5 100644 --- a/config/example-delta.cfg +++ b/config/example-delta.cfg @@ -67,7 +67,6 @@ max_temp: 130 # Extruder print fan (omit section if fan not present) #[fan] #pin: ar9 -#hard_pwm: 1 [mcu] serial: /dev/ttyACM0 diff --git a/config/example.cfg b/config/example.cfg index afa14082..9037d919 100644 --- a/config/example.cfg +++ b/config/example.cfg @@ -219,11 +219,12 @@ max_temp: 110 pin: ar14 # PWM output pin controlling the fan. This parameter must be # provided. -hard_pwm: 1 +#hard_pwm: 0 # Set this value to force hardware PWM instead of software PWM. Set # to 1 to force a hardware PWM at the fastest rate; set to a higher -# number (eg, 1024) to force hardware PWM with the given cycle time -# in clock ticks. The default is 128 clock ticks. +# number to force hardware PWM with the given cycle time in clock +# ticks. The default is 0 which enables software PWM with a cycle +# time of 10ms. #kick_start_time: 0.100 # Time (in seconds) to run the fan at full speed when first enabling # it (helps get the fan spinning). The default is 0.100 seconds. diff --git a/config/makergear-m2-2012.cfg b/config/makergear-m2-2012.cfg index 833ea72a..845e64b0 100644 --- a/config/makergear-m2-2012.cfg +++ b/config/makergear-m2-2012.cfg @@ -71,7 +71,6 @@ max_temp: 100 [fan] pin: PH5 -hard_pwm: 1 [mcu] serial: /dev/ttyACM0 |